Ključ Za Matico nakup rabljenega (84.952)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 200.04.007.13, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 1.700 mm, skupna dolžina: 4.800 mm, skupna širina: 900 mm, TEHNIČNE PODROBNOSTI Min. višina obdelovanca: 8 mm Maks. višina obdelovanca: 60 mm PODROBNOSTI O STROJU Moč: 11 kW Omrežna napetost: 400 V Tok: 28 A Faze: 3 Frekvenca: 50 Hz Dimenzije in teža Dimenzije (D x Š x V): 4.800 x 900 x 1.700 mm Teža stroja: 1.250 kg OPREMA Multifunkcijska rezkalna enota Predrezkalna enota Oblikovalska rezkalna enota Iedpfx Adjyux Egekjtd Lepljenje enota

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4712, stiskalna sila: 120 t, premer cilindra: 90 mm, število valjev: 6, hitrost stiskanja: 200 mm/s, TEHNIČNE PODROBNOSTI Iedpjyuxh Ijfx Adkstd Maksimalni tlak: 120 t Dimenzija tiskalne površine: 2.500 x 1.300 mm Višina stiskanja: 200 mm Število valjev: 6 Premer valja: 90 mm Hitrost stiskanja: 12 m/min OPREMA Popolna linija z: Sistemom za nalaganje Lepilni stroj Razlagalnik/razstapljač Visokofrekvenčna omara (naprodaj ločeno)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: 10659, premer spodnjega valja: 300 mm, premer zgornjega valja: 350 mm, delovna širina: 3.000 mm, najv. debelina pločevine: 25 mm, lastna masa: 24.000 kg, TEHNIČNE PODROBNOSTI Število valjev: 4 kos. Maks. debelina pločevine: 25 mm Maks. delovna širina: 3.000 mm Premer zgornjega valja: 350 mm Premer spodnjih valjev: 300 mm Ijdpfx Aoyua Ezedkstd PODROBNOSTI STROJA Krmiljenje: konvencionalno Dimenzije in teža Dimenzije (D x Š x V): 6.300 x 2.000 x 1.800 mm Lastna teža: 24.000 kg Transportni paketi: 1 kos.

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja dolžina izdelka: 1.400 mm, največja širina izdelka: 1.000 mm, Oprema: CE označba, TEHNIČNE PODROBNOSTI Število peskalnih turbin: 4 Moč na peskalno turbino: 22 kW Količina peskanja na turbino: 7 kg/uro Hitrost peskanja: 450 kg/min Hitrost curka: 80 m/s Največja dimenzija izdelka: 1.400 x 1.000 mm Premer kabine: 2.200 mm PODROBNOSTI O STROJU Krmljenje: Siemens Itjdeyua D Repfx Adked OPREMA Vibracijsko sito za brusne/peskalne materiale in izhodne materiale Dovod prek zunanjega tirnega sistema CE-označevanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 3115, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.000 kg, dolžina podajanja os X: 2.000 mm, dolžina tračnega lista: 4.870 mm, širina tračne žage: 32 mm, TEHNIČNE PODROBNOSTI Dolžina tračnega lista: 4.870 mm Širina tračnega lista: 32 mm Hitrost tračnega lista: 110 m/min Kapaciteta rezanja okroglih profilov: 340 mm Maks. dolžina podajanja: 2.000 mm Itjdpfxsyuaz Nj Adkod PODROBNOSTI STROJA Upravljanje: Konvencionalno Vrsta žage: Avtomatska Horizontalno/Vertikalno: Horizontalno Dimenzije in teža Dimenzije (D x Š x V): 2.000 x 1.850 x 1.800 mm Lastna teža: 2.000 kg Transportni paketi: 3

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, delovna širina: 8.500 mm, najv. debelina pločevine: 8 mm, zadnji prislon: 1.000 mm, skupna dolžina: 9.530 mm, Oprema: zaščita prstov, Stroj je bil obnovljen leta 2021! TEHNIČNI PODATKI Širina reza: 8.500 mm Debelina reza: 8 mm Zadnja meja: 1.000 mm Iodjyuaiajpfx Adkotd PODROBNOSTI O STROJU Krmiljenje: Konvencionalno Moč motorja: 15 kW Mere & Teža Mere (D x Š x V): 9.530 x 2.750 x 2.950 mm Teža stroja: 55.000 kg OPREMA Električni omejevalnik Zaščita za prste: Fiksna Nastavljanje kota: Motorizirano Nastavljanje reže reza: Motorizirano Dokumentacija CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 97862034, vgradna višina: 255 mm, najv. debelina pločevine: 5 mm, delovna širina: 180 mm, stiskalna sila: 100 t, hod: 50 mm, TECHNICAL DETAILS Pressing force: 100 t Total force: 1,000 kN Ring serration force: 40 - 310 kN Counter-holder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min): 20 rpm Stroke rate (max): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per piston stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Feed height adjustment max.: +40 mm Max. distance between feed rollers: 20 mm Resolution, based on rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Isdpfx Aoytcd Rodkjtd Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & Weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Uncoiling unit Two tool sets Note: Further technical details on the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-out cycle. As a result, parts were not ejected and the machine stopped for safety reasons. However, the seller assumes this is simply a matter of adjustment. The seller recommends overhauling the controller in the long term.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Iedjytr Hbepfx Adketd Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 180 mm, Nižje cene ni – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Največja širina obdelovanca: 1.000 mm Minimalna debelina obdelovanca: 3 mm Maksimalna debelina obdelovanca: 180 mm Največja hitrost podajanja: 25 m/min Enota 1 Enota: kombinacija valja/pada Material: guma Iodpfx Asyttyvodketd Enota 2 Enota: vertikalni pad PODATKI O STROJU Moč motorja: 1,2 kW OPREMA Delovna miza s fiksno višino Delovna površina Podajalni trak Stroj se prodaja in dostavlja v stanju, v kakršnem je dejansko in pravno (“videno in všečano”), na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico blago pred prevzemom pregledati ter prevzema odgovornost za montažo, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 6385

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Iodpfx Aeytr Rgjdkotd Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 0-261-04-6588, Funkcionalnost: popolnoma funkcionalen, moč: 21 kW (28,55 KM), višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, skupna dolžina: 6.060 mm, skupna masa: 2.600 kg, The machine has the following configuration: Emulsion spray at infeed and outfeed Edge preheating Pre-milling unit: Tool diameter: 100 mm, tool height: 63 mm, diamond tool with interchangeable knives, motorized distance adjustment Glue application unit: Glue and hot air application, heated applicator roller, quick change of the entire unit, automatic positioning via motor, 3 pressure rollers, edge feed speed: 14 m/min Cut-off unit: Twin-motor unit with automatic tilting up to 15°, THK prism guides Radius milling unit: 2 tools, automatic adjustment in two axes, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL SPECIFICATIONS Workpiece thickness: 8–60 mm Feed speed max.: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double upper pressure for part stability Electronic thickness control Frequency inverter for feed Automatic lubrication of the feed chain Automatic motor calibration Itodpfeyu If Nsx Adked Touch control panel

Stanje: novo, Clean Air Filter Type: Power Unit 300 P Offer type: New machine Ijdjhfmpxspfx Adkstd Technical specifications: Motor power: 7.5 kW / 3 Ph / 400 V / 50 Hz Intake nozzle: DN 300 mm Rated air flow: 5,089 m³/h Max. air flow: 6,000 m³/h Negative pressure at rated flow: 2,434 Pa Filter area: 30 m² Compressed air cleaning incl. integrated pre-separator incl. integrated automatic extinguishing system Chip collection volume: 3 x 250 l Sound pressure level: 71 dB(A) incl. dust barrier Dimensions (L x W x H): 3000 x 1058 x 2361 mm Weight: 838 kg

Stanje: novo, ATEX version Gear-driven radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Isdoh Ucqtspfx Adketd Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Compressed air: 5–7 bar Note on used machinery: • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. Itedjdd Hi Eepfx Adked (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Itodpfx Adjv Tb Hgsked Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg Itedpfx Adsr A Eq Rokjd PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. Itedpscuwptjfx Adksd • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Ijdpfjd Akyzjx Adkstd Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders Itsdpfx Aded Supgskjd - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!) Itsdjhy Tlrepfx Adkod

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Iodpfx Adol D Rp Eeketd Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Itjdpewiwnqjfx Adksd Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Itjdpfolc Ewiex Adked Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Ijdpeg Nn E Nefx Adkotd Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Itodpfet Dx U Sjx Adkjd Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm