Klin Bar nakup rabljenega (15.721)

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Dsdpfxow A Rv Is Apwsku Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), volumenski pretok: 66 m³/h, obratovalni tlak: 120 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, 1 piece high-pressure piston compressor including sound enclosure and 1,500-liter compressed air tank. The unit ran without any faults until the complete shutdown of production. Manufacturer: J.A. Becker & Söhne Model: SV 1101/120 Number of cylinders: 3 Number of compression stages: 3 Free air delivery: 66 m³/hour Maximum pressure: 120 bar Drive power: 22 kW Speed: 1,457 rpm Year of manufacture: 1998 Compressed air tank Manufacturer: FMS Capacity: 1,500 liters Operating pressure: 120 bar Dodpovgrp Ssfx Apwoku Year of manufacture: 1998 Product data sheet attached as PDF below the advertisement description!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, pritisk: 13 letvica, 1 used steam boiler Dedpfxsuugi Sj Apwsku ----- Manufacturer: LOOS Gunzenhausen Model: U-HD 1250 Heating surface approx.: 20 m² Maximum boiler output: 1,250 kg/h Operating overpressure: 13.0 bar Increased test pressure: 24.05 bar Water capacity at NW approx.: 993 l Total water capacity approx.: 1,365 l Year of manufacture: 2003 CE marking: 0036 Equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250–1,550 kW, 15–500 mbar, gas control section, control cabinet, feed water pump, and existing coarse and fine fittings. Economizer: Eco 3, 82 kW, 31 bar, 238°C, 28 l

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Model: U-HD 1250 Djdpfx Apowra Ewswsku Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Operating overpressure: 13 bar Increased test overpressure: 23.4 bar Water content at NW approx.: 993 l Water content full approx.: 1,365 l Year of manufacture: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300–1,750 kW, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Dodpfx Aswn Eaxspwsku Manufacturer: Reishauer, Wedge bar chuck Chuck size: Ø 165 mm -Spindle recess: Ø 268 mm -Bolt circle: Ø 140 mm -Bore through: Ø 40 mm -Dimensions: Ø 165 x 120 mm -Weight: 11.7 kg

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Dkedpewqb Scofx Apwju Podajni valj z motoriziranim nastavljanjem višine Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži - Zadnji vodilni sistem Voziček za izvlek palic Glavni motor in prenos Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma.

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, universal unit, hydraulic station - Manufacturer: Integral Hydraulik, hydraulic power unit with pressure switch Dkjdpowmax Hsfx Apwju - Pressure: up to 30 bar - Flow rate: 6 l/min - Pressure switch: Telemecanique XMG-B140 - Hydraulic reservoir: with pressure accumulator and level indicator - Individual components: see photos - Dimensions: 465/260/H510 mm - Weight: 48 kg

Stanje: novo, Leto izdelave: 2026, Our 3000 kg lever bar is an indispensable tool for any warehouse, workshop, or production hall that prioritizes durability and reliability. Manufactured from high-quality steel, this lever ensures longevity and resistance to mechanical damage. Its robust frame provides stability during lifting, minimizing the risk of accidents and damage to transported items. The lifting height of the bar is 90 mm. The 3000 kg transport lever is the ideal solution for moving various types of loads in diverse working environments. It is perfectly suited for both small workshops and large warehouses or manufacturing plants. With a maximum load capacity of 3000 kg, durable steel construction, transport wheels for easy maneuverability, an ergonomic and comfortable handle, and versatile applications, our lever is an indispensable tool for lifting and transporting heavy loads. If you are looking for a reliable tool for lifting and moving heavy goods, our 3000 kg transport lever will meet your expectations. Choose a proven solution that will increase your work efficiency and ensure user safety. Feel free to contact us and purchase our transport lever. We guarantee top quality and satisfaction with the use of our product. Technical specifications: Load capacity: 3000 kg Total length: 1400 mm Tube diameter: 38x3 mm Nose plate thickness: 11 mm Dkodpfxovxq Nhj Apwju Nose plate width: 65 mm Weight: approx. 8 kg

Stanje: zelo dobro (rabljeno), Loos kotel 2500 kW, 10 barov. (5082) Na željo z oljnim ali plinskim gorilnikom. Djdpfoxqr Dmox Apweku

Stanje: zelo dobro (rabljeno), CERTUSS Universal 500 TC. 500 kg/h. 10 barov. Hitri parni generator Dodpfxexqr D Tj Apwoku

Stanje: zelo dobro (rabljeno), Standardni parni kotel 2000 kg/h 22 bar (2166) oljni ali plinski gorilnik Dsdpfx Apexqr E Dsweku

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Manufacturer: Forkardt, wedge bar chuck with mounting plate - Chuck size: Ø 250 mm - Bolt circle: Ø 235 mm - Spindle nose: short taper 11 (196.8 mm) Dkodpfx Asgp Tm Sopwou - Through hole: 60 mm - Total dimensions: Ø 400 x 265 mm - Weight: 67 kg

Leto izdelave: 2026, stanje: novo, Naprava za obročkanje traku BRT 100 z dornom Ø - zvija materiale različnih premerov in širine v kotu upogiba do 360° - varno pripenjanje materiala z zobato letevjo - visoka delovna natančnost zaradi kaljenih in brušenih dornov - četrtinski dorn zagotavlja ostro kotno zvijanje (opcijsko) Dkjdpfxjfmy Aho Apwju Zmogljivost upogibanja: hladno: do 100x5 mm hladno: do D 12 mm toplo: do 100x15 mm toplo: do D 30 mm Možni premeri upogibanja z dornom: 6,0-31,5 mm / z valjem: 32-60 mm

Stanje: rabljeno, Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 220 mm - Mounting taper: Ø mm - Mounting bolt circle: mm - Through bore: 50 mm Dodpfxsdnaz Nj Apwjku - Interchangeable jaws - Weight: 25 kg

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, hydraulic pressure pump, hydraulic pump - Motor: 0.25 kW, 1410 rpm - Max. pressure: 110 bar - Max. flow rate: l/min - Hydraulic tank - Pressure relief valve: 1 - Valve: 1 - Dimensions: 350/250/H435 mm Dsdpfxjdpyzrs Apweku - Weight: 32 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500, similar but not Dynajet, Oertzen, Falch, etc. - Cold water / hot water up to approx. 95°C and steam 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only for 250 and 350 bar versions) and chemical-free weed control function at approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (High-pressure steam) | 16 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (High-pressure steam) | 16 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and unladen weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and unladen weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and unladen weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Hour meter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift sleeves - Stainless steel covers Dkjdedqkrwopfx Apwou - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance and 25° flat jet nozzle - Additional accessories such as water tank frame, 300 or 500 l water tank, water-sandblasting kit, surface cleaner, rotary nozzle, sludge suction pump, steam nozzle, weed control lance and boom available on request

Stanje: rabljeno, Hydraulic power unit, hydraulic pump Dsdpfx Apedwc I Iswoku -for: folding machine Harbs K2V -maximum pressure: 70 bar -motor: 0.75 kW, 1400 rpm -dimensions: 650/460/H600 mm -weight: 60 kg

Stanje: novo, 🚀 Modular powder coating systems with bar conveyor technology Our state-of-the-art painting lines with overhead bar conveyors offer maximum flexibility with minimal space and energy requirements. All process steps—from pretreatment to oven curing—can be accomplished in a fully integrated line. 💡 Ideal for the following applications: - Powder coating and wet painting - Sandblasting - Chemical pretreatment - Curing and cooling 🔁 Intelligent transfer system The conveyor transports workpieces safely and efficiently through every station in the system: - Available in manual or motor-driven versions - Optional lifting device for heavy workpieces - Parking stations for buffering and intermediate storage - Compatible with automatic paint booths and walk-in booths Movement is fully automated with a steplessly adjustable drive, enabling precise cycle control. 🏗️ Structure & components: - Monorail track for longitudinal movement - Cross-transfer units for directional changes - Mobile carriages with product holders - Load-bearing steel structure for continuous heavy-duty operation - Control panel with adjustable speed settings Dsdpfody Ezdox Apweku ⚙️ Efficiency through thoughtful design The system enables contact-free handling—the workpiece is loaded at the entry station and remains in the same position throughout the entire process, ensuring consistently high quality and minimizing handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting mechanism allows ergonomic and safe operation for heavy components. Personnel can precisely position the lifting bar at the push of a button (raise/lower)—ideal for large parts. ✅ Your advantages at a glance: - Fully automated material flow - For workpieces of any size or weight - Reduced space requirements - Minimal maintenance, maximum service life - High energy efficiency - Customizable to your specific needs This solution is perfectly suited for modern coating processes where flexibility, ergonomics, and efficiency are key. Our experienced engineering teams will tailor the system to exactly match your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Stanje: rabljeno, Hydraulic power unit, hydraulic pump - Max. pressure: 80 bar Djdpfx Aeb Uhuhepwoku - Flow rate: 18 l/min - Hydraulic tank: litres - Dimensions: 700 x 355 x H830 mm - Weight: 200 kg

Leto izdelave: 1981, stanje: rabljeno, Hydraulic power unit, hydraulic pump, hydraulic pump - Max. flow rate: 25 l/min - Hydraulic tank: mm - Motor: kW rpm - Hydraulic valve - Pressure relief valve - Pressure gauge - Filter Dksdpochp Azsfx Apweu - Dimensions: 500/800/H850 mm - Weight: 248 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 7 h, številka stroja/vozila: MA0036_S0053901, Screw Compressor ALMIG BELT XP 8 - 10 bar (air-cooled) Year: 2024 / IMMEDIATELY AVAILABLE! Operating Hours: 7 h Technical Data Model: BELT XP 8 Operating Overpressure: 10 bar (g) Free Air Delivery, per ISO 1217 Annex C: 0.99 m³/min Degree of Protection / Insulation Class Drive Motor: IP 55 / ISO F Rated Power Drive Motor: 7.5 kW Operating Voltage / Frequency: 400/50 V/Hz Djdpfjd S Dq Eox Apweku Sound Pressure Level (DIN 45635 Part 13): 63 dB(A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 274.5 kg Compressed Air Connection: G 3/4" Visit our showroom in Erlangen. We always have a wide range of new and used compressors in stock. For new equipment, we offer in-house bank leasing with a truly simple process.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, številka stroja/vozila: MA0138_MAXXI4,0D_270st, Demonstration Unit: Brand new piston compressor available immediately (Plug and Play): AIRKO MAXXI 4.0 D - 270 ST - 10 bar with upright 270 liter compressed air tank The compressor has only 1 operating hour and is available for immediate delivery. 2 cylinders Pressure: 10 bar Dodpfod Hy T Ajx Apwjku Rated power: 4.0 kW FAD at 7 bar: 495 l/min Sound level: 78 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 155 x 59 x 113 cm Weight: 134 kg Convenient leasing available through our partner bank. Visit our showroom. We always have a wide range of new and used compressors in stock! Immediate availability.

Stanje: novo, The FG170 grinding and polishing machine for square tubes and flat profiles stands out due to its robust construction, making it suitable for intensive working conditions. Dodpfod Ix Ntox Apwoku This machine processes workpieces up to 170 mm in width by combining multiple abrasive belt heads with brush units. The FG170 Z is equipped with one abrasive belt head (Z). The FG170 ZK combines an abrasive belt head (Z) with a brush unit (K). Possible configurations include: FG170 2Z = 2 abrasive belt heads, or FG170 2ZK = 2 abrasive belt heads + 1 brush head Other configurations can be selected according to customer requirements. Abrasive Belt Head: Used for processing the surface during the grinding process of square tubes and flat profile elements – removes severe defects and burrs. Brush Head: Final finishing after grinding – provides the surface with a smooth and uniform finish. The FG170 guarantees high and consistent quality when processing stainless steel square tubes and flat profiles, tube by tube. Abrasive Belt Change: Abrasive belt change in a few seconds, tool-free. Fixed Working Height: FG machines offer a fixed working height. Adjustment for different material thicknesses is made via the vertical movement of the processing stations, so there is no need to modify the roller table at the infeed. Technical Specifications – FG170: Working capacity (Ø mm): 170x200 Number of belt stations (Z): 1-3 Number of brush stations (K): 0-2 Abrasive belt dimensions (mm): 170x2000 Brush band dimensions (mm): 170xØ200 Abrasive belt speed (m/s): 20 Brush band speed (m/s): 15 Feed speed (m/s): 6+12 Abrasive belt motor per head (kW): 4 Brush motor per head (kW): 3 Feed motor (kW): 0.45 Total power (kW): 8.5 (ZK) Power consumption (A): 18 (ZK) Dust extraction connection per head (Ø mm): 80 Dimensions (mm): 1500x1000x1900 (ZK) Weight (kg): 740 (ZK)

Stanje: rabljeno, Welding bar -from: vacuum device Röschermatic VM 45/2 Dkjdpfsd I Hizsx Apwou -Price: per piece -Quantity: 4 pieces -Dimensions: 635 mm / 15 mm / 30 mm -Weight: 2.2 kg/piece

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, PTC JTR-C Cold Water Trailer, similar to but not Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on a hot-dip galvanized frame, with jockey wheel, parking brake, automatic reverse gear, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Dedjfdkbgepfx Apwoku Engine types: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 mm - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HP hose reel: fixed and manual or hydraulic with max. 100 m 1/2" and 60 m 3/4" hose (included) - Water supply reel: manual with 50 m 3/4" hose - Water tank: 600 l - Options such as remote control, warning beacon, work light and accessories available on request