Ročni upogib bar

Zopf BRT 100

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), A spinning, drawing, and winding line for the production of monofilament yarns, multifilament FDY, and POY is available. Spinning positions: 24, yarn ends: 192, drawing: cold and hot godets, doff change: without yarn break, number of heated/cold godets: 50/50, winders: 24 (+2 reserve winders). Includes various spare parts for the machine and electronics. Documentation available. On-site inspection possible. Dkjdpfxouanq Ts Afler

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Dkodpfx Asiknv Eofljr

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Dkodpfxjz H Dyo Aflor Weight: 750 kg

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Dodpfxsbruzgj Aflskr Širina: približno 8,5 m Dolžina: približno 7,95 m Naprava je razstavljena Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal tool milling machine with gear transmission, travel distances X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left/right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/tilting table, dimensions 1500x1700x1750 mm, approx. 2200 kg Dodpfx Afsfvci Eolskr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, SRF Master Illustration on the left 2 m extraction arm Application area Low levels of fume/dust Occasional use Benefits Minimal repositioning of the extraction hood required Greater flexibility thanks to additional hose connection at the rear Features Safe operation with filter monitoring Extraction hood can rotate and swivel 360 degrees Push handle and cable holder Process 3-stage Filter type Disposable filter Filter surface approx. 12 m² Separation efficiency > 99% Filter material Fiberglass fleece Welding fume separation class W3 Additional filters Two pre-filters Basic data Extraction capacity max. 950 m³/h Diameter of extraction arm Ø 150 mm Length of extraction arm 2 m Diameter of suction connection Ø 150 mm Power supply 230 V / 50Hz Motor power 1.1 kW Dodpfx Ajdqzbroflekr Sound pressure level 72 dB(A) Dimensions (W x D x H) 705 x 655 x 900 mm Weight approx. 71 kg

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Dkedpfxjvbk Rwe Afler Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Stanje: rabljeno, Pressure: 200 t Column spacing: 1600 mm Maximum ram stroke: 600 mm Installation height: 900 mm Table width: 1600 mm Table depth: 1300 mm Dkedpsg S R Twofx Aflsr Table height: 1060 mm Ram surface: 1600 x 1300 mm T-slots: DIN 650 / 22H12 Rapid traverse: 400 mm/s Return speed: 325 mm/s Pressing speed: 42 mm/s at 40% Pressing speed: 20 mm/s at 100% Blankholder force: 800 kN Blankholder stroke: 150 mm Blankholder speed up: 68 mm/s / down: 225 mm/s Year of retrofit: 2001

Stanje: dober (rabljeno), Leto izdelave: 1990, CNC milling machine manufacturer: TOS, model: FGS40CNC Control: Heidenhain TNC 355, year 1990 Travel paths: X 1000 mm / Y 500 mm / Z 500 mm Dkjdodtfhqspfx Aflsr Spindle taper: ISO 50.

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Hydraulic press for die testing and adjustment Brand: MHG Model: ER.2S.DM-300/2100 Serial no.: 927 Year: 2020 Required power: 40 kW Hydraulic oil: 1000 l reservoir + 200 l circuit fill Total number of cycles: 403 (AS-NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300 t Number of cylinders: 3 Maximum tooling dimensions: 1400 x 1400 mm Maximum tooling mass: 16,000 kg Dsdpfxek Sgvye Aflokr Maximum opening between fixed and moving tables: 1690 mm Minimum opening between fixed and moving tables: 960 mm Maximum stroke of moving table: 730 mm Approach speed: 92 mm/s Return speed: 93 mm/s Stop time: 0.2 s Safety distance: 500 mm Weight (empty tank): 35,000 kg