Kempak 200 Tig nakup rabljenega (17.682)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, dolžina ozemljitvenega kabla: 4.000 mm, vrsta hlajenja: zrak, dolžina paketa cevi: 3.000 mm, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, Nerabljen varilni aparat MIG/TIG 200 ACDC Sinergijski postopek MIG in WIG AC/DC za jeklo, nerjaveče jeklo in aluminij. Idealno primeren za uporabo doma, na terenu, za splošna varilna dela, za lahke konstrukcije iz jekla, nerjavečega jekla in aluminija ter v delavnici. * 5-200 AMP * 230 voltov * Sinergijski * ACDC * WIG pulz * 2/4 takti * Plin pred tokom / Plin po toku * Začetni tok / Končni tok * Povečanje toka / Zmanjšanje toka * Čas pulza / Frekvenca pulza * AC ravnovesje / AC frekvenca * AC val * Točkovno varjenje * Prednastavljeni programi / Shranjevanje programov * Možnost uporabe različnih elektrod Vključuje: * Varilna pištola SB150, 3 metre * Varilna pištola SR17, WIG * Kabli za ozemljitev, 3 metre, 35 mm² * Kabel za elektrode * Plinska cev * Navodila za uporabo * Originalna embalaža * 3 mesecev garancije od podjetja Cjays Aparat je nerabljen in izvira iz skladiščne zaloge. Bwedpfxjzqc U Aj Altor Ne velja tovarniška garancija podjetja Lascentrum. Preizkusno varjenje je možno v naši delavnici v Valkenswaardu. Obisk je možen le po predhodnem dogovoru. Možnost preizkusnega varjenja. Na voljo je tudi video posnetek aparata med varjenjem. Dobavljamo tudi v države, kot so Španija, Nemčija, Avstrija, Litva, Grčija in vse druge države v Evropi in izven nje, s paletami. Vsi naši aparati so bili vzdrževani in so 100-odstotno pripravljeni za uporabo, razen če ni navedeno drugače. Slike zgoraj prikazujejo dejanski aparat. Lahko vam ponudimo tudi druge vrste aparatov, na primer: Rabljen, nov, Mig, Mag, CO2, Tig, pulz, AC/DC, plazma, vodno hlajen, elektroda. Ponujamo naslednje znamke: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Poslujete vedno neposredno s podjetjem Cjays Lastechniek in nikoli s tretjimi osebami.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: nepreverjeno, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, dolžina ozemljitvenega kabla: 3.000 mm, skupna masa: 11 kg, trajanje garancije: 3 meseci, vrsta hlajenja: zrak, dolžina paketa cevi: 4.000 mm, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, Cjays Tig 200E ACDC – WIG pulzna varilna naprava ACDC s hlajenjem s plinom Razstavni stroj, pripravljen za takojšnjo uporabo. 3 mesecev garancije. Tehnične specifikacije: 5–200 A 230 V 2/4 takti Pulz / frekvenca pulza Plin pred varjenjem / plin po varjenju Začetni tok / končni tok Povečanje toka / zmanjšanje toka AC uravnoteženje Možnost izbire elektrode Vključeno: 4 metre varilne žice SR17, kabel za maso z objemko in cev za plin. Obisk je možen le po predhodnem dogovoru. Možnost preizkusnega varjenja. Na voljo je tudi video posnetek stroja med varjenjem. Dobavljamo tudi v države, kot so Španija, Nemčija, Avstrija, Litva, Grčija in vse druge države znotraj in zunaj Evrope, s paletami za transport. Vsi naši stroji so bili servisirani in so 100-odstotno pripravljeni za uporabo, razen če je navedeno drugače. Slike zgoraj prikazujejo dejanski stroj. Lahko vam ponudimo tudi druge vrste strojev, na primer: Rabljen, nov, MIG, MAG, CO2, TIG, pulzni, AC/DC, plazma, z vodnim hlajenjem, elektroda. Bedpfozmnqzsx Altjwr Ponujamo naslednje blagovne znamke: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Pri Cjays Lastechniek vedno sklepate posel neposredno, nikoli pa s tretjimi osebami.

Stanje: rabljeno, TIG Welding Machine L-TEC Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 A = 60% duty cycle 155 A = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Power connection: 400 Volt, 50 Hz, 32 Amp. plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - DC only Bodjdzqb Eepfx Altowr - HF ignition Required space (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Otherwise, in good condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, dolžina ozemljitvenega kabla: 3.000 mm, trajanje garancije: 3 meseci, vrsta hlajenja: zrak, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, For sale: Bwedsy Rqh Topfx Alter Cjays TIG 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 cycle Pulse function Pre-gas / Post-gas Current up-slope / down-slope Start current / End current Electrode option Suitable for welding steel and stainless steel Test welding possible Includes 4-meter SR17 welding torch, ground cable, gas hose, spare parts, and 3-month warranty. Test welding is possible. A video of the machine in welding operation is available upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per transport. All our machines have been serviced and are 100% operational, unless otherwise stated. The images above show the actual machine. We can also offer you other types of machines, such as: Used, New, MIG, MAG, CO2, TIG, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: dober (rabljeno), Varilna zmogljivost: 10 - 200 A Teža: 103 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Nemčija Bsdsyrglcopfx Altowr

Stanje: pripravljen za uporabo (rabljen), CANTILEVER RACK, DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideally suited for storing lightweight long goods such as pipes, profiles, slats, battens, rails, and other bulky materials in warehouses, workshops, or artisan businesses. With a height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides organized and easily accessible storage space on both sides. Featuring 6 storage levels including the base, it offers ample capacity while making efficient use of available space. Each arm supports up to 200 kg. The robust construction ensures reliable performance in daily use. FREE DELIVERY WITHIN GERMANY INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Overall height: approx. 2,000 mm - Usable arm depth: approx. 500 mm - Usable base level depth: 525 mm - Total depth: 1,150 mm - Upright spacing (bay width): approx. 1,250 mm - Load per arm: max. 200 kg (with evenly distributed load) - Load per upright: max. 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & roll-off guard welded in place - Color finish: RAL 7016 (anthracite grey) - Connectors & cross bracing: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base part made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm length, from RR 50x30x2 mm - Includes all cross bracing and required bolts - Includes heavy-duty anchors Price: €1,229.00 net incl. delivery. €1,462.51 gross incl. delivery. You will receive an invoice with VAT shown separately. Delivery included: Delivery within Germany free to your location, excluding islands. Fast processing and dispatch directly after receipt of order. Bodpozp I Ewjfx Altewr INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company page. We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: dober (rabljeno), Štirivpenjalno vpenjalo, štirivpenjalni stružni vpenjalnik, 4-čeljustni vpenjalnik - Proizvajalec: Röhm, štirivpenjalno vpenjalo Ø 200 mm Bwedpfxotxklye Altor - Premer prehoda: Ø 55 mm - Razdelilni krog: Ø 133 mm - Nosilec: Kratek stožec 6 / stožec 103 - 105 mm, kratkostožčasta prirobnica s Camlock pritrditvijo - Dodatki: vključuje 2 kompleta izmenljivih čeljusti in napenjalno orodje - Dimenzije: Ø200 x 185 mm - Teža: 24 kg

Stanje: dober (rabljeno), Čelna plošča, čelna vpenjalna plošča, štiričeljustna vpenjalna plošča, čelni stružniški vpenjalnik - Čelna plošča: Velikost vpenjala Ø 200 mm - Vpenjanje: Kratki stožec 4 / Stožec Ø 61–63 mm, pritrdilna prirobnica s kratkim stožcem s Camlock pritrditvijo - Razdalja med vijaki: Ø 82 mm - Prehodna izvrtina: Ø 41 mm Bodpfexuflfox Altswr - Dimenzije: Ø 200 x 125 mm - Teža: 9,5 kg

Stanje: novo, Current 200 A Duty cycle at 100%: 150 A Bwedpfxswrzrxo Altor Mains voltage: 230 V Machine weight: approx. 9.0 t Footprint: approx. 0.46 x 0.15 x 0.32 m TIG welding machine - new - 3 m hose package - additional 8 m hose package - earth cable - gas connection hose - documentation

Stanje: zelo dobro (rabljeno), The Weldkar TIG 2025 230 V AC/DC portable inverter welder features a welding current range from 10 to 200 A and comes equipped with all the essential options one would expect from a professional TIG welding machine. The welder offers HF ignition, up- and downslope adjustment, 2-4 stroke control, gas flow control and post-flow, as well as pulse frequency adjustment. In addition to a wide range of settings and adjustments for (pulsed) TIG welding, this unit is also equipped with an MMA function (for stick electrode welding). Thanks to its high output, the welder is suitable for welding aluminium, stainless steel, and steel up to 5 mm. Furthermore, the Weldkar TIG 2025 AC/DC Pulse features adjustable current frequency, which improves penetration and ensures better control of the weld pool. The control panel, despite the multitude of functions and options, is straightforward and clearly arranged. Bwjdpfx Aled Nzlxoter THE WELDERS ARE NEW, FROM TRADE SHOWS, DEMONSTRATION UNITS.

Stanje: skoraj kot novo (rabljeno), 🧰 Lastnosti izdelka Proizvajalec: UTZ Stanje: skoraj novo Material: Visokokakovostni polipropilen (PP) Barva: črna Zunanje mere: 350 × 210 × 145 mm Notranje mere: 305 × 180 × 134 mm Prostornina: 7 litrov Teža: 0,66 kg Posebnosti: Evropski standard, možnost zlaganja, ESD - prevodno 💰 Cena 5,00 € neto, brez DDV Popust ob večji količini: na zahtevo Stroški pošiljanja: po vsej Evropi, na zahtevo Dobavni rok: na voljo takoj Ogled in prevzem: možen kadarkoli po dogovoru Stalno več kot 5000 tekočih metrov paletnih regalov različnih proizvajalcev na zalogi (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do prodaje predhodno! Glejte naše splošne pogoje, vse cene so brez DDV, iz zaloge.) Lenox Trading – vrhunska skladiščna tehnika in regali za težke obremenitve, rabljeni in novi Opis: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehniko v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, na voljo takoj • 20.000 m² skladiščnih podestov in jeklenih podestov, na voljo takoj • 30–50 tovornih vozil na teden za maksimalen izbor 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE V SPLETU): Ne glede na to, ali kupujete paletne regale, regale za težke obremenitve, visoke regale, regale s policami, regale za gume ali regale za IBC-posode – mi dostavimo in montiramo po vsej Evropi z našo LASTNO ekipo! Vključno s CAD-načrtovanjem, transportom, razstavljanjem in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJ / STEČAJA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STEBER: SPLETNE DRŽAVNE IN LIKVIDACIJE Pri razstavljanju in čiščenju ponujamo celovito storitev: Bedpfx Ajwaa Nfeltswr 1. Plačilo fiksne cene: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno s popolnim čiščenjem. 2. Provizijsko draženje: izvedba dražb po naročilu. Naša celovita storitev, ki jo izvajajo naši zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, razstavljanje in popolno čiščenje. Ne glede na to, ali ste najprej izvedeli za nas zaradi regalov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Obrnite se na nas za neobvezujočo ponudbo!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard Bwsdpfomhhypjx Altsr - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Bedemidyfjpfx Altowr Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: rabljeno, Polična stiskalnica Tiger 1000x2200 19/26 Bwodpfjzkh H Rsx Alter

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 309 h, High lift pallet truck Mast type: None Bedpfjvi Tf Hex Altewr

Leto izdelave: 2004, stanje: dober (rabljeno), Stroj za brizgano oblikovanje do 5.000 kN Tip stroja: Krauss Maffei KM 2300-12000 MC Letnik izdelave: 2004 Nadzorni sistem: CNC MC4 Delovne ure: 93.900 ur TEHNIČNI PODATKI Zapiralna enota Zapiralna sila: 23.000 kN Sila za odpiranje orodja, maks.: 1.420 kN Potisna sila premične plošče (odpiranje): 227 kN Potisna sila premične plošče (zapiranje): 203 kN Površina za pritrditev orodja (Š x V): 2.830 mm x 2.400 mm Razdalja med stojali (Š x V): 2.000 mm x 1.600 mm Hod za odpiranje orodja: 2.600 mm Minimalna višina orodja: 1.100 mm Bwjdpfjzi Sfzsx Altsr Maksimalna višina orodja: 1.800 mm Maksimalna razdalja orodja: 3.700 mm Hidravlični hod izmetalnika: 350 mm Sila izmetalnika naprej/nazaj: 415/115 kN Premer vijačnega valja: 135 mm Razmerje Ls/D: 23 Brizgalni tlak: 1.389 bar Prostornina hoda: 8.588 cm³ Teža odlitka (PS): 7815 g Brizgalna zmogljivost: 1.019 cm³/s Število vrtljajev vijačnega valja: 113 vrt/min Maksimalna zmogljivost plastifikacije: 191 g/s Tlak v šobi: 241 kN Električna in hidravlična oprema Nazivna moč motorja črpalke: 132 kW Vgrajena moč grelnja: 997 kW Število nastavljivih grelnih con cilindrov: 7 Število sušilnih ciklov: 350 1/h Prostornina rezervoarja: 2500 l Dimenzije in teža Dimenzije stroja: 15,15 m x 4,15 m x 3,29 m Skupna teža stroja: 143.000 kg Maksimalna teža kalupa: 62.000 kg Robot LRX 1000 Os X: 2.000 mm Os Y: 3.000 mm Os Z: 5.000 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, nosilnost: 12.000 kg, gradbena višina: 2.650 mm, lastna masa: 2.000 kg, skupna dolžina: 3.100 mm, gradbena širina: 1.750 mm, Crane arm ISO class: Terminal West Bwjdeu Dzv Tspfx Altor Condition: Ready for use and fully functional Technical condition: very good

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, nosilnost: 7.000 kg, lastna masa: 613 kg, gradbena širina: 2.200 mm, Nastavljalnik vilic Težišče nosilnosti: 600 ISO razred: ISO razred 4 = 5.000 - 10.000 kg Bedpfx Aou Dzx Uoltswr Stanje: Pripravljeno za uporabo in popolnoma funkcionalno Tehnično stanje: zelo dobro Opis: Bočni pomik; nastavljalnik vilic, odprtina 540 / 2080 mm Bočni pomik; nastavljalnik vilic, odprtina 540 / 2080 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm Bedomhh Dhepfx Altjwr - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Bwjdpomhhx Ijfx Altjr We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard Bwedemhh Anepfx Altsr - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm Bwsdpfx Aoh Ek Dajlter - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Bwsdpsmhhf Ssfx Altor Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Bwsdpemhhl Hsfx Altjr Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) Bwedemkixwjpfx Alter - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.