Indukcijsko Grelec nakup rabljenega (162)

Leto izdelave: 2023, obratovalne ure: 898 h, Stanje: rabljeno, številka stroja/vozila: 116593, Maximum workpiece length: approx. 800 mm, movement axes: X-axis: approx. 20 mm, Y-axis: approx. 250 mm, Z-axis: approx. 1,000 mm, 1 quenching medium/generator water unit, consisting of: 1 x 1,000-liter quenching medium tank, 1 x 600-liter generator water tank, stainless steel supply lines, 1 coolant filtration system, 1 air filtration system IFS Vario M 1600, year of construction: 2023, serial no.: 568269-2, net weight: approx. 85 kg Lsdpfx Abox Akk Aobjrg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 1.800 kW (2.447,32 KM), Directly available from stock: 1700kW load bank for fixed installation. 400 volts / 50 Hz Ledpfxeuubcte Abborg 6 steps of approx. 250kW 2 steps of approx. 125kW Other configurations available upon request External control power supply 64A / 400V / 50Hz Control via Modbus and HMI integrated in the cabinet Equipped with its own circuit breaker in the enclosure. Optionally expandable with motor. 20ft container

Stanje: rabljeno, Electric heater, electric heating element, heating coil, electric tubular heater, touch-safe semiconductor heater, control cabinet heater, fan heater, blower heater, control cabinet fan -Manufacturer: RO/SE Fan Heater / Control Cabinet Heater Lrodpfx Aof Sxbusbbog -Type: HH/250s -Power: 250 Watt -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – simply plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 2 l per day can be controlled via app – set temperature, receive notifications and monitor fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation as with gas mobile use thanks to 4 swivel castors operated with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust gases – does not emit any burning smell Ledpfeqvlw Iox Abberg compliant with the new EU emissions directive automatic restart after power failure

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – just plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 2.5 l per day app-controlled – set temperature, access notifications and fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation as with gas heaters Lrjdpfjqvlu Ejx Abbog mobile use thanks to 4 swivel castors operates on biodiesel or (red) diesel e quiet operation – only 48 dB no dust – no fan no exhaust gases – emits no burning smell complies with latest EU emission regulations automatic restart after power failure

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – just plug in and switch on Lrodpfsqvlvmjx Abbog clean combustion – no chimney required very economical – fuel consumption approx. 4 l per day app-controlled – set temperature, receive messages and monitor fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation like with gas mobile usage thanks to four swivel castors operated with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust fumes – no combustion odor emitted complies with the new EU emissions directive automatic restart after power failure

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 150 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, skupna masa: 100 kg, trajanje garancije: 6 meseci, temperatura: 85 °C, The Kärcher HDS 801 E high-pressure cleaner is a highly efficient machine, suitable even for the toughest tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly tested the machine for all functions. All mechanical components showing wear and tear were replaced with new parts, including ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting and trouble-free operation, eliminating the need for additional future investments in the machine. Product advantages: NEW ELECTRIC HEATING SYSTEM Lredpfxov Sri Ao Abbog The unit features new accessories, including a German-brand R+M trigger gun, stainless steel lance, braided steel hose, and a 25° power nozzle. HDS-E units with electric water heating are primarily designed for locations where exhaust emissions are prohibited or hazardous. A robust brass pump head with new ceramic pistons and seals guarantees long-lasting, trouble-free operation. The powerful and efficient 3-phase motor delivers outstanding performance. Thanks to operating parameters of 150 bar and 740 l/h, this machine can be effectively used for heavy-duty applications in construction, logistics, and agriculture. Every device we offer includes individually made photos—you are purchasing exactly the machine you see. Technical specifications: Power supply [V]: 400 ~ 3-phase Pump capacity [l/h]: 740 Operating pressure [bar]: 150 Max. heating temperature [°C]: 85 Boiler rating [kW]: 24 Total power consumption [kW]: 29.6 Hose length [m]: 10 Chemical tank [l]: 20+25 Weight [kg]: 100 Equipment: NEW ELECTRIC HEATING SYSTEM NEW R+M German trigger gun NEW 900 mm stainless steel lance NEW reinforced 10 m braided steel hose NEW 25° power nozzle Water filter and GEKA connection are included in the set at no extra charge.

Stanje: dober (rabljeno), Immersion heater - Power: max. 2000 W - Selector switch: 12 positions - Casing: made of aluminium Lsdpfx Aeb A Iavebbjrg - Connection: 230 V - Weight: 5 kg

Stanje: rabljeno, Tricool 99 S2/50, chiller 50/S2/1617, kombinirani hladilnik iz nerjavečega jekla na mobilnem podstavku, tudi z možnostjo ogrevanja Lsdpsdmn U Aofx Abbjrg

Stanje: zelo dobro (rabljeno), LECTROTHERM AJAX TOCCO INDUKTIONSERWÄRMUNG Stromversorgung Inductron Inductotherm 330 kW Lrjdpfefhnwyjx Abbog

Stanje: dober (rabljeno), Tubular heater, tube burner, pipeline construction burner - Maximum diameter: 250 mm - Burner for steel pipeline construction - Propane Lrjdpfjb A Ix Sox Abbeg - Transport case - Dimensions: 600/1400/H330 mm - Weight: 90 kg

Stanje: dober (rabljeno), REZNOR UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Peak Efficiency The best-known device from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install recirculating unit is available in 14 output sizes ranging from 7 to 97 kW and comprises a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from outdoors (standard) or from the installation area. The REZNOR UDSA warm air heater guarantees even air distribution throughout the heated space. Its patented heat exchanger sets new standards in flow behavior and heat transfer, delivering an efficiency of over 92%. UDSA: compact, revolutionary, and forward-thinking. This new generation of devices enables cost-effective direct heating of halls – i.e., without central heating – using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater – Advantages: - Efficiency of more than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion design - Quiet operation - CE system certification, type B or C - Compact design for easy installation - Uniform heat distribution - Standard vertical and horizontal air guide louvres - Modulation of heat output down to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) with fan-assisted atmospheric multi-gas burners. Installation, as well as gas and exhaust connections, must only be carried out by an authorized installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculating air operation - Intake temperatures below 5°C (with stainless steel heat exchanger)* - Single-stage or two-stage* heating operation, controlled via room thermostat and heating control switch - Ventilation control via ECOtronic TN-L° with day-night-week program - Exhaust gas routing through the roof (type B or C) or through an exterior wall (type C only) Gas WLE Type: UDSA015-4 Gas Appliance Type: B22P-C12-C32-C52-C62-C82 Designation: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Lredpfx Abjx Ihiiebog Connection Pressure: 20 mbar Nozzle Pressure: 7.80 mbar Max. Nominal Heat Input (Hs) QN: 17.60 kW Max. Nominal Heat Input (Hi) QN: 15.86 kW Max. Nominal Heat Output: 14.59 kW Min. Nominal Heat Output: Connection Voltage: 230V 1N, 50Hz Air Volume Flow: 1360 m³/h Protection Class: IP20 More new and used items can be found in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Efficient Performance at its Peak The best-known product from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. This recirculating air unit is easy to install and available in 14 capacity ranges from 7 to 97 kW. It comprises a heat exchanger, gas burner, and an exhaust fan. Combustion air can be supplied either from outdoors (standard) or from the installation room. The REZNOR UDSA warm air heater guarantees even air circulation within the heated hall. Its patented heat exchanger sets new standards in airflow and heat transfer, achieving an efficiency rate of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of units enables halls to be heated directly in a particularly economical way—that is, without a central heating system—using decentralised, modulating gas warm air heaters. Lrodpfx Aex Ihg Iobbeg REZNOR UDSA Gas Warm Air Heater. The Advantages: - Efficiency of more than 92% - Suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE-certified, type B or C - Compact design for easy installation - Uniform heat distribution - Standard vertical and horizontal air deflection louvres - Modulating heat output down to 50% - EC technology - ErP Ready These units are directly heated gas warm air heaters (WHE) with fan-assisted atmospheric multi-gas burners. Installation and gas/exhaust connections must only be carried out by an authorized installation company. These gas WHEs are suitable for: - Natural gas or LPG operation - Recirculation mode - Intake temperatures below 5°C with stainless steel heat exchanger* - 1-stage or 2-stage heating* control via room thermostat and control switch - Ventilation° control via ECOtronic TN-L° with day-night-week schedule - Flue gas discharge through the roof, type B or C ° - Flue gas discharge through the external wall, type C ° Gas WHE Type: UDSA025-3 Gas Appliance Category: B22P-C12-C32-C52-C62 Country of Destination: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 8.20 mbar Max. Rated Thermal Input (Hs) QN: 30.08 kW Max. Rated Thermal Input (Hi) QN: 27.75 kW Max. Rated Heat Output: 25.53 kW Min. Rated Heat Output: Connection Voltage: 230V 1N, 50Hz Air Flow Rate: 2385 m3/h Protection Rating: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Peak Efficiency The UDSA gas warm air heater is Reznor's most renowned unit, providing uniform air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 output sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either from outside as standard or from the installation room. The REZNOR UDSA warm air heater ensures uniform air distribution throughout the heated space. Its patented heat exchanger sets new benchmarks in airflow and heat transfer, assuring an efficiency rate above 92%. UDSA: compact, revolutionary, and forward-looking. With this generation of appliances, halls can be heated directly in an especially economical manner—meaning without central heating—using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. Key Advantages: - Efficiency greater than 92% - Suitable for vertical installation - Low NOx emissions - Innovative combustion technology - Quiet operation - CE-certified (Type B or C) - Compact design for easy installation - Even heat distribution - Standard vertical and horizontal air deflectors - Modulates heating output down to 50% - EC motor technology - ErP compliant These units are direct-fired gas warm air heaters (WLE) with fan-assisted atmospheric multigas burners. Installation, gas and exhaust connections must be performed by a licensed installation company only. The gas WLEs are suitable for: - Operation on natural gas or LPG - Recirculation mode - Inlet temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage* heating control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN-L° with day-night-week programming - Roof exhaust, Type B or C° - Wall exhaust, Type C° Lrsdpfxex Ig Ttj Abbsg Gas WLE Type: UDSA025-4E Gas Appliance Type: B22P-C12-C32-C52-C62-C82 Intended Use: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Inlet Pressure: 20 mbar Nozzle Pressure: 8.20 mbar Max. Rated Heat Input (Hs) QN: 30.08 kW Max. Rated Heat Input (Hi) QN: 27.75 kW Max. Rated Heat Output: 25.53 kW Min. Rated Heat Output: Supply Voltage: 230V 1N, 50Hz Airflow Rate: 2,385 m3/h Protection Class: IP20 More new and used items in our shop! International shipping costs on request!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, moč: 650 kW (883,75 KM), Lesnozrnat toplozračni grelec. Primeren za žitne sušilnice ali industrijske hale. Popolnoma avtomatski z vžigom. Zelo malo uporabljen – deloval samo dve sezoni. Zadnjih 11 let shranjen v suhem prostoru. Hidravlično gnane rešetke za optimalen proces zgorevanja. Ima hidravlično gnano zalogo, ventilator in vso pripadajočo opremo. Avtomatski transport pepela. Lrjdpewxq D Rsfx Abbsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Sušilni grelec 220 kW z oljnim gorilnikom Weishaupt, model WL30Z-C. Malo obratovalnih ur. Model sušilnika brez dimne cevi. Ledpsliianjfx Abbsrg

Stanje: rabljeno, Ta ponudba je za Thermo Scientific Multi Blok grelec 2050 1CE. Ljdpfxsxv Aduo Abberg Enota je v popolnoma delujočem stanju in je pripravljena na takojšnjo uporabo. Multi Blok Heater je laboratorijska grelna naprava, ki se uporablja za gretje vzorcev v epruvetah, vialah, PCR ploščah itd., z prevodom toplote skozi kovinski blok namesto z vodno kopeljo. “2050” je številka modela, medtem ko “1CE” (ali “1CEQ”) označuje eno‑blokovno, CE‑certificirano različico, primerno za uporabo z enim izmenljivim modularnim blokom. Naprava je kompaktna in namizna, namenjena za inkubacije pri fiksni temperaturi, predgrevanje vzorcev, encimske reakcije in druge laboratorijske postopke, kjer je potrebna stabilna toplota.

Stanje: rabljeno, Ta ponudba je za suhi blokovni grelec Grant QBD2. Naprava je v popolnoma delujočem stanju in pripravljena za takojšnjo uporabo. Grant QBD2 je vsestranski, univerzalni sistem suhega blokovnega gretja z dvema po meri izdelanima blokoma. Lodpfsxv A R Iox Abbjrg Grant QBD2 je visokozmogljiv digitalni suhi blokovni grelec, zasnovan za natančno in dosledno segrevanje vzorcev v številnih laboratorijskih aplikacijah. Idealno za molekularno biologijo, klinično ter splošno laboratorijsko uporabo, omogoča prilagodljivost z zamenljivimi bloki in nastavljivimi funkcijami.

Stanje: rabljeno, Dieses Inserat bezieht sich auf den Eppendorf Thermostat C Dry Block Heater. Das Gerät ist voll funktionsfähig und kann sofort eingesetzt werden. Beschreibung: Ljdpoxwc Nmefx Abborg Peltier-Technologie ermöglicht eine komfortable und präzise Temperaturkontrolle von -10°C bis +110°C. Heizen und aktives Kühlen aller gängigen Gefäß- und Plattenformate von 5 μL bis 50 mL. Präzise Aufrechterhaltung verschiedener Temperaturniveaus. Zuverlässige Verhinderung von Kondensatbildung mit optionalem ThermoTop™ (tect™) Deckel. Höchste Flexibilität dank einer großen Auswahl an austauschbaren SmartBlocks. Trockene Inkubation für verbesserte Laborthygiene. Einfache und intuitive Bedienung durch vordefinierte Temperaturtasten (4, 16, 37, 56 und 95°C). Bis zu 15 Programme individuell speicherbar. Umfangreiche Programmfunktionen. Der Eppendorf Thermostat C ist das ideale Gerät zur genauen Einstellung und zuverlässigen Aufrechterhaltung von Temperaturen. Der ThermoStat C überzeugt durch ausgezeichnetes Temperaturmanagement. Dank Peltier-Technologie bietet das Gerät eine komfortable und präzise Temperaturregelung für alle gängigen Laborgefäße. Die Bedienung ist einfacher und intuitiver denn je: Über die vordefinierten Temperaturtasten greifen Sie schnell auf fünf wesentliche Versuchstemperaturen zu. Darüber hinaus können dank umfangreicher Programmfunktionen bis zu 15 Programme individuell gespeichert werden. Mit einer großen Auswahl an austauschbaren SmartBlocks passt sich der ThermoStat C jeder Anwendung an. Wichtige Merkmale: - Heizen und aktives Kühlen aller gängigen Gefäß- und Plattenformate von 5 μL bis 50 mL - Hervorragendes Temperaturmanagement - Präzise Temperaturkontrolle von -10°C bis 110°C (110°C einstellbar bei Verwendung des 12 mm und Cryo SmartBlocks) - Zuverlässige Verhinderung von Kondensatbildung mit optionalem ThermoTop® (tect) Deckel - Maximale Flexibilität durch große Auswahl an austauschbaren SmartBlocks™ - Trockene Inkubation für bessere Laborthygiene - Einfache und intuitive Bedienung mit vordefinierten Temperaturtasten (4°C, 16°C, 37°C, 56°C, 95°C) - Umfangreiche Programmfunktionen - Austausch der SmartBlocks in nur 2 Sekunden dank Quick-Release-System

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Prodaja se indukcijski zapečatni stroj za zapečatenje različnih pokrovčkov. Letnik: 2024. Lsdpfx Abex Dx N Njbsrg

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Indukcijski zapečatni stroj / indukcijski zapečatni stroj / stroj za zapečatenje pokrovčkov Naprodaj je indukcijski stroj za zapečatenje različnih pokrovčkov Lodpfsx Dx H Ujx Abberg Leto izdelave: 2025

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 105 kg, vhodna napetost: 230 V, trajanje garancije: 24 meseci, temperatura: 95 °C, Données techniques : État : NEUF Référence : 1.030-500.0 Type de courant (Ph/V/Hz) : 1 / 230 / 50 Puissance raccordée (kW) : 0,3 Température d'entrée (max.) : 50°C Débit d'entrée (min.) : 400 l/h Débit d'eau (l/h) : 400-1000 Soupape de sécurité en surpression (max.) : 200 bar Température de service eau chaude (max.) : 95°C Puissance du brûleur : 43kW Consommation de fioul (max.) : 3,5 kg/h Réservoir de carburant : 20L Carburant : fioul EL ou diesel Poids en service : 105kg Longueur x largeur x hauteur (mm) : 880x680x860 Livraison : Pistolet manuel Classic – Filetage M22 Lance : 1050 mm Flexible : 10m – DN8 – 250bar – 100°C – M22/M22 Lredpoxtc Rcofx Abbog Flexible (connexion nettoyeur haute pression–générateur d’eau chaude) : 3m – DN8 – 315bar – 60°C Appareil longue durée : - Le cadre robuste assure une protection lors d'une utilisation continue et intensive. - Toutes les pièces nécessitant un entretien ou une maintenance sont facilement accessibles. - Filtre à carburant intégré et réservoir démontable pour nettoyage facile.

Stanje: dober (rabljeno), Kroll M 150 Mobilni generator toplega zraka Lrsdpfxsxwkw Ee Abbog Področje uporabe: Ogrevanje hal, šotorov in gradbišč Zaščita pred zmrzaljo v vrtnarskih obratih ali skladiščih vseh vrst Hitro sušenje novogradenj Dodatno ogrevanje v hladnem obdobju Gorivo: ekstra lahko kurilno olje (Heizöl EL) Nazivna toplotna moč: 135 kW Nazivna toplotna obremenitev: 150 kW Poraba olja: 12,7 kg/h Pretok zraka: 7.300 m³/h Električni priključek: 220 V / 6,1 A Poraba energije: 1,38 kW Zaščitni razred: IP 44 Dimenzije: Dolžina: 2.600 mm Širina: 900 mm Višina: 1.300 mm Teža: 270 kg Več artiklov – novih in rabljenih – najdete v naši trgovini! Mednarodni stroški pošiljanja po povpraševanju!

Stanje: dober (rabljeno), Leto izdelave: 2005, Offer 25190 Technical data approx.: Ledpfx Abjwp Exdobjrg - max. temperature: 400 °C - temperature control: 0 - 250 °C - timer automatic: 0 - 60 min - working space under yoke: 320 - 200 mm - max. bearing weight: 250 kg - power supply: 400 V / 12 kVA - required space (approx.): W 850 x D 600 x H 1150 mm - weight (approx.): 150 kg - yoke sizes: 40 + 50 + 80 mm - mobile base frame

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 150 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, gorivo: elektrika, skupna masa: 135 kg, trajanje garancije: 6 meseci, temperatura: 80 °C, The Nilfisk MH 5M-150/750 high-pressure cleaner is a highly efficient unit designed to handle even the toughest tasks in large-scale facilities. During comprehensive inspection and refurbishment, our service team thoroughly tested every machine function. All mechanical components showing wear or signs of use, such as ceramic pistons, seals, bearings, and all O-rings, were replaced with new parts. This guarantees long-lasting, trouble-free operation without the need for further investment in the machine in the future. Ljdov Src Nspfx Abborg Product features and equipment: - NEW ELECTRIC HEATING - The photos shown display the exact machine on offer. Nilfisk E series machines with electric water heating are primarily intended for use in locations where exhaust emissions are prohibited or harmful. The robust and durable brass pump head ensures reliable performance even under prolonged and demanding operation. Special insulation significantly reduces heat loss from the boiler, resulting in more than 40% energy savings in standby mode. The powerful and efficient 3-phase motor delivers high operating parameters and excellent performance. With specifications of up to 150 bar pressure and 750 l/h water flow, the unit can be successfully used across industry, construction, transport, and logistics sectors. High performance allows the same job to be completed in less time. After refurbishment, the machine underwent extensive testing to ensure all procedures were carried out correctly. The testing process confirms that all operational parameters—such as working pressure and water flow—have been fully restored to catalog specifications. Technical Data: - Supply voltage [V]: 400 ~ 3 phase - Pump output [l/h]: 750 - Working pressure [bar]: 150 - Max. heating temperature [°C]: 80 - Boiler heating capacity [kW]: 24 - Detergent tank [l]: 10 + 10 - Hose length [m]: 10 - Weight [kg]: 135 Scope of delivery includes completely new accessories: - New power nozzle - New reinforced 10m high-pressure hose - New stainless steel spray lance - New German high-performance spray gun A water filter and GEKA coupling are included free of charge in the set.