Hx 6000 nakup rabljenega (2.646)

Stanje: dober (rabljeno), številka stroja/vozila: 5336, Load capacity: 6000 kg Faceplate dimensions: 1500 x 1500 mm Tilting range: horizontal up to -145° Rotational speed: 0 - approx. 1 rpm Gsdogbt Sqopfx Aa Ujuc Electrical connection: 400 V, approx. 5 kW Space requirements: 2800 x 2350 x 3250 mm Weight: 5000 kg

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: ET226, Machine Overview Automatic inline self-adhesive labelling machine, equipped with two pressure-sensitive application stations for front and back label application. The system conveys containers in a linear track and provides positive product control via an integrated spacing device, a wrap/roll unit, and a top hold-down counter-belt. At the machine’s discharge, a special smoothing system ensures optimal label adhesion and finish. The unit is suitable for medium to large containers ranging from 1 to 10 liters and was completely overhauled in 2022 to extend its operational lifetime and reliability. Designed and built by P.E., model PACK LAB, year of construction 2008. Technical Specifications Gedeyhcgzspfx Aa Ueuc Configuration: Linear labeller with 2 self-adhesive stations Labelling Method: Pressure-sensitive/self-adhesive labels Label Placement: Front and back (single or double application) Optical Alignment: Not equipped (mechanical guides and product handling) Container Range: 1–10 L containers (typical rigid bottles/cans with stable base) Product Handling: Container spacing device, wrap/roll unit, top hold-down counter-belt Discharge: Label smoothing system at machine outfeed Protection Class: IP54 (machine and electric motors) Year: 2008 | Overhaul: 2022 Productivity: 6,000 bph Automation & Control Control Architecture: Industrial PLC-based control with 24 VDC auxiliaries for machine logic Power Distribution: 400 V ±5%, 50 Hz, 3P + N + PE (neutral conductor and separate protective earth) Instrumentation Supply: 24 VAC / 230 VAC Operator Interface: HMI with recipe/format management and station status (typical for this series) Sensors & Safety Interlocks: Safety interlocks, product presence monitoring and label application monitoring Line Integration Infeed Control: Integrated spacing module stabilizes product pitch before labelling Product Stabilization: Top hold-down counter-belt and wrap/roll unit for precise label placement Discharge Quality: Smoothing/pressing elements at the discharge to ensure adhesion and finish Mechanical Interface: Linear conveyor path, suitable for integration into existing filling/packaging lines Utility Interface: Standard industrial electrical connections as specified below; no optical alignment required Condition & Maintenance Modernization: Comprehensive overhaul in 2022, including inspection of application stations, drive components, belts/rollers, safety guards, and electrical sections Preventive Maintenance: Routine maintenance of label unwinding groups, rollers, belts, and sensors recommended according to operating hours and label materials Spare Parts: Standard consumable components designed for long-term support and easy maintenance Performance & Versatility Applications: Front and back labelling on a wide variety of rigid containers in the 1–10 L segment (e.g. food, beverage, household/industrial containers, etc.)

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: TP111, Used Tetra Pak Helicap 23 Capper 6000 bph The used Tetra Pak Helicap 23 6000 bph capper applies plastic screw caps to carton packages. Tetra Pak manufactured this model in 2007 and configured it for the 1000 Slim format. The widely used Slim format features a rectangular profile with a reduced cross-section. This design optimizes liquid packaging by improving shelf-life and reducing material consumption. Technical Specifications of the Used Tetra Pak Capper The Helicap 23 model is equipped with the CAP 47 screw cap, ensuring a hermetic seal and allowing easy opening for the consumer. In addition, the screw system maintains a constant torque, preventing leaks or packaging defects. The used Tetra Pak Helicap 23 6000 bph capper operates on a 400/230 VAC power supply, supporting both industrial three-phase networks and configurations with neutral and ground. Furthermore, the electrical system works on 50/60 Hz frequencies, making it adaptable to different power standards. The 20 A main fuse (adjustable) regulates maximum absorption, while the control circuits operate on 24 V DC, providing a safe voltage for machine operation. Pneumatically, the system requires compressed air with a pressure between 6 and 7 bar. This ensures the correct functioning of the capping and closure handling mechanisms. Safety and Storage Conditions The used Tetra Pak Helicap 23 6000 bph capper is equipped with integrated safety devices to comply with industrial regulations. These features prevent accidents during maintenance and production processes, reducing the risk of malfunctions. Currently, the machine is in good condition in storage. Therefore, it is ready for reinstallation in a filling plant. The configuration also allows seamless integration with other Tetra Pak equipment, ensuring high production efficiency without the need for structural modifications. Applications and Operational Advantages of the Used Tetra Pak Capper This used Tetra Pak capper processes up to 6000 bottles per hour (bph). Due to its compatibility with the 1000 Slim format, it is particularly well suited for packaging beverages in Tetra Pak containers designed for large-scale distribution. This capper offers several benefits: Gujdpfx Aaeyhbygo Ujc - Applies the CAP 47 screw cap with high precision. - Controls the torque...

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview Gjdpfoyhbtgex Aa Ueuc This used CFT–COMACO RVAR 6/10 + TA/3 is a volumetric monoblock for filling and capping edible oils. Built in 2008, it is currently in production. It is a proven solution for industrial packaging environments looking to expand or upgrade a used filling line. We can sell it as-is (as seen and liked) or with modernization and preventive maintenance to prepare the monoblock for production. Modernization and Preventive Maintenance Measures To ensure reliability and readiness for production, the following modernization measures can be carried out as needed: • Assembly of machine components in KBB workshop • General machine cleaning • General lubrication (greasing, oil level check and oil change if necessary) • Inspection of rubber parts (belts and seals) with replacement if required • Machine startup: checking circuit integrity and correct function in manual/automatic mode • Verification of availability and integrity of changeover parts Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) • Product: Edible oil (filling temperature 10–30 °C) • Filling system: 6 volumetric dosing groups (cylinders & pistons, rotary plug valves), out-of-neck filling; Maximum dose 10,500 cc • Nozzles: 6 + 6 + 6 patented nozzles for edible oils • Accuracy: 1σ = 0.6 g • Mechanical data: Filling pitch 377 mm; pitch circle diameter 720 mm; max. container diagonal 220 mm; max. height 460 mm • Construction: Base frame made of painted steel, fully clad with AISI 304 stainless steel; AISI 304 product tank with convex bottom and float level control Capper – TA/3 (press-on) • 3 capping heads with PP320 press-on heads and positive pick-off (vacuum-assisted) • Rated capacity: up to 6000 cph for PET press-on caps • Pitch circle diameter 360 mm; machine pitch 377 mm • Pick & Place cap transfer; hardened steel cams for head pistons • Automatic height adjustment of the electric turret; central lubrication shared with the filler • Two cap elevators, each with 300 l covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, Closures and Output Rates • PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) • Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/gallon/5 L (Ø32) • Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); Flex-spout common to all tinplate formats • Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Advanced Automation and Control Systems • Siemens PLC: SIEMENS S7 E300 with controls for automatic and manual mode; inverter-driven main motion with increased power to drive the capper via gearbox • Automatic turret height adjustment (filler and capper)...

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MR006589, Visokokakovostni, hitri čelilni žagalni stroj z avtomatskim potisnim sistemom in programsko opremo za optimizacijo. Stroj je opremljen s funkcijo zaznavanja napak v materialu z uporabo krednih črt in vključuje naslednje opcije: - Pnevmatski pritisni cilinder na desni strani žage - Pnevmatski pritisni cilinder na levi strani žage - Paket 'OPTI' z zaznavanjem dolžine materiala in dodatnimi optimizacijskimi kriteriji Gedey I N Akspfx Aa Usuc - Paket 'OPTI PLUS' s fotocelico za prepoznavanje napak v materialu - Stroj z izhodno mizo (na meter) - Tiskalnik etiket - MO9416XLTD Tehnične specifikacije: - Kot reza: 90 ° - Največja dolžina reza: 360 mm - Največja višina reza: 135 mm - Največja potisna dolžina: 6000 mm - Uvoz seznama rezov: Da - Senzor krednih črt: Da - Največji premer žaginega lista: 500 mm - Moč motorja: 10 KM - Serijska številka: 10561

Leto izdelave: 2001, obratovalne ure: 27.046 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC travelling column milling machine, cast iron construction Extremely robust design thanks to triple-guided X-axis and fixed table Machine will be provided EXW TECHNICAL DETAILS X-axis (Longitudinal) linear guideway: 5,300 mm (triple-guided) Y-axis (Cross) linear guideway: 1,000 mm (double-guided) Z-axis (Vertical) flat guideway: 1,500 mm (double-guided) Spindle speed range: 60 to 3,000 rpm Tool holder: SK 50 Tool changer: 40 positions Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350 mm / Ø=200 mm Table size: 6,000 x 1,000 mm Heidenhain control: TNC426 with colour display and handwheel Rapid traverse X, Y, Z axis: 10,000 mm/min Clamping area: 6,000 x 1,000 mm T-slots: 22 H12 / spacing 130 mm Central T-slot: 22 H7 MACHINE DETAILS Operating hours: 62,774 (as of 11/2022) External coolant system: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Heidenhain electronic handwheel - Pendulum machining capability monitored by light barriers - New X-axis covers - Twin chip conveyor - New milling head bearings (2021) - Operating manual / documentation CONDITION - Service and maintenance schedules adhered to - Geometry in good order - Suitable for pendulum machining Guedpfx Aelhqkhja Ujc Machine available from July-August

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Graphic Whizard numbering, perforating, and creasing machine with extensive accessories. Immediately available. Gjdpfx Aaovcxwnj Ueuc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, proizvajalec krmilnikov: PFEIFER technology, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, Premer cevi (maks.): 160 mm, Dolžina cevi (maks.): 7.500 mm, dolžina mize: 6.500 mm, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 13 letvica, skupna masa: 5.500 kg, skupna dolžina: 14.800 mm, skupna širina: 2.900 mm, skupna višina: 2.525 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, delovno območje: 7.500 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, odsesavanje hlapov, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 profile and tube laser fiber laser metal cutting for fast material changeovers with up to 6kW, ideal for your production needs. An intelligent and highly effective tube laser processing solution: round tubes, square tubes, rectangular tubes, open sections, and special profiles – all laser cut. This laser machine guarantees maximum productivity during production changeovers. The task: a fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations combined with a robust mechanical structure ensure excellent cutting performance and precision. The tube and profile laser processing machine is designed for production with a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony. Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile and tube loading chain system enables rapid job changeovers. The optional bundle loader offers independent operation. Bevel Cutting A feature that changes everything. With our machines’ ability to tilt the cutting head on a fifth axis up to 50°, we've solved one of the biggest challenges in modern profile processing. If the laser beam always hits the workpiece at a 90° angle, the result is an elliptical cutting edge. By enabling the tube laser cutting head to tilt, you can achieve fully angled cuts together with the feed axis. Naturally, the skyTUBE laser guarantees operational safety! The skyTUBE Pro is a class 1 laser system. There is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, nothing is more important than maximum safety and compliance with the highest standards and regulations. Technical Features: · Enclosed industrial housing; class 1 or, if required, class 4 laser · Working range for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes from 15 x 15 to 110 mm · Tube working area X 6500 / Y±100 / Z 150 / A ±360° / U ±50° · Automatic material feed for up to 6 x 160 mm profiles, lengths 3500 – 7000 mm Gedpfx Aeyh A Nyoa Uouc · Automatic unloading system for profile sections, tailored to the desired profile length · Z drive system: ball screw axis with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cutting length, a standard system with max. 4.5 m automatic unloading results in a total system length of approx. 14,800 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, teža obdelovanca (maks.): 800 kg, model krmilnika: HEIDENHAIN iTNC 530, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! Guodpfsyvudvsx Aa Usc TEHNIČNI PODATKI Pomik X-osi: 6.000 mm Pomik Y-osi: 800 mm Pomik Z-osi: 600 mm Vretenasti priključek: SK 50 Hitrost vretena: 20 - 9.000 min⁻¹ Navor: maks. 165 Nm Obremenitev mize: 3.000 kg Maksimalna masa obdelovanca: 800 kg PODATKI O STROJU Krmiljenje: HEIDENHAIN iTNC 530 Glavni pogon: 60 kW Teža stroja: pribl. 24 t

Stanje: dober (rabljeno), Leto izdelave: 2014, Profesionalni stroj za povezovanje priznanega proizvajalca, zasnovan za visoko hitrost in nemoteno delovanje. - Do približno 30 povezovanj na minuto. - Notranje mere okvirja približno 850 x 600 mm. - Trdno povezovanje s 12 mm trakom. - Samodejni napredek in povratek traku. - Napetost traku nastavljiva. - Povezovanje se sproži s tipko ali pa samodejno (sensor v delovni plošči). - Preprosto in ergonomsko menjavanje kolutov ter navajanje traku. - S povoznimi valji na delovni površini. - Delovna višina približno 820 mm. - Stroj je premičen po kolesih. Gusdpfxoyxqwqj Aa Uec Stroj je mogoče prikazati pod tokom.

Stanje: dober (rabljeno), Leto izdelave: 2017, Profesionalni stroj za ovijanje priznanega proizvajalca, zasnovan za visoko hitrost in nemoteno delovanje. - Do približno 30 ovijanj na minuto. - Notranje dimenzije okvirja približno 850 x 600 mm. - Fiksno ovijanje z 12 mm trakom. - Samodejni podajanje in vračanje traku. - Napetost traku nastavljiva. - Sprožitev ovijanja preko ročnega gumba, nožnega stikala ali alternativno možnost samodejnega delovanja (senzor v delovni plošči). Gjdpfx Aoyxqrnsa Usuc - Enostaven in ergonomičen sistem za menjavo koluta in napeljavo traku. - Opremljeno z ergonomskimi valjčnimi progami na delovni površini. - Delovna višina približno 820 mm. - Stroj je pomičen po kolesih. Stroj je možno predstaviti pod elektriko.

Leto izdelave: 2026, stanje: novo, MONTHLY OFFER only in April! The ZS 6000 Automatic Packaging Machine is suitable for various types of vegetables such as potatoes, onions, carrots, cucumbers, beets, etc. The machine performs automated electronic weighing, filling of raschel mesh bags, as well as sewing or sealing the bags. The harvested produce is conveyed from the hopper onto a feed belt equipped with checker plate, where it is dosed into the two electronic weighing units. The conveyor belt transports the produce to the desired position. Packaging capacity: 1–25 kg. Available in two versions: powder-coated or stainless steel construction. Technical Information • Output: ~6 t/h Type / per hour 5 kg 1690 kg 10 kg 2600 kg 15 kg 3700 kg 20 kg 6120 kg • Power supply: 6 kW, 400V • Packaging range: 1-25 kg (manual 50 kg) • Packaging type: Raschel mesh bag • Sewing machine: 1-needle New Long NP-07 • Control: 7″ touchscreen • Label dispenser • Conveyor belt with vibration motor • Dosing system with vibration technology • Suitable produce: potatoes, onions, cucumbers, carrots Available in two versions: powder-coated or stainless steel construction. Dimensions: Length: 1940 mm Width: 4300 mm Height: 2230 mm Weight: ~950 kg Gujdpfx Aev Uw Hxoa Usc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, model krmilnika: Sinumerik 840Dsl, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel Ranges / Feed Force X 1000 mm 15 kN Y 1000 mm 15 kN Z 1000 mm 20 kN B 360°, 0.001° Direct position measuring system on all axes Rapid traverses: Axis dynamics Power Gujdpfxoxxx Dcs Aa Uoc X/Y/Z 50 m/min, 5 m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43 kW (40% DC) Torque: 822 Nm (40% DC) Last spindle replacement 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600 mm Max. diameter: 280 mm Tool coding: Balluff chip Second control panel at setup station Setup station with 7 handover positions Pallet Exchange System Pallets: 630x630 mm Max. interference circle: 1000 mm Max. height: 1200 mm Max. load: 1000 kg Coolant System: Scraper-belt chip conveyor Knoll coolant system Paper band filter High-pressure internal cooling (IKZ) 50 bar, frequency-controlled Work area rinsing Emulsion mist extraction Blow-off unit for operator door Additional Equipment: Planing unit (auxiliary/U-axis) 4 planing units per machine Tangential control incl. NC cycles Wireless probe (Renishaw) Space requirement: 7100x3750x4300 mm (L/W/H) Machine weight: 15,600 kg Total power demand: 44 kVA CNC Control: Sinumerik 840D sl Fast drill breakage detection Process-integrated tool monitoring Status lights 3D data for work area simulation Operating data acquisition (OPC/UA) Year built: 2015 Operating hours: approx. 32,000 h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total of 20 pallet positions on 2 levels Control: MMS Space requirement: approx. 18x2.4x4.2 m Total system footprint (2x Heller + Fastems) approx. 18x10x4.5 m Machines are still in active production. Inspection on request possible. Relocation of the machines can be organized.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been thoroughly rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the acceptance criteria of the WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: lead time from 3 to 3.5 months, general overhaul to order Technical specifications: - Centre distance/turning length: 6,000 mm - Swing over bed: 930 mm - Swing over carriage: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centres: 6,000 kg - Maximum workpiece weight between centres + 1 steady rest: 7,500 kg - Maximum workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, toolpost Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and variants - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost Godpfsiwa Iaox Aa Ujuc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm Gsdov Ab Dqspfx Aa Ueuc - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: n/a, število osi: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004 and features a high-speed motor spindle with 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It is equipped with a 5-axis milling package, 92 tool stations, and a Marposs collision monitoring system. Ideally suited for machining long parts up to 6,000 mm and pendulum machining. If you are looking for a high-quality milling machine, you should consider the CHIRON Mill 6000 SK we have for sale. Contact us for further information. Machine advantages Guedpex Nr Irefx Aa Uoc Technical machine advantages • 92 tool positions HSK-A63 (background magazine) • Long-part machining up to a maximum of 6,000 mm • Face machining (5th side) horizontally with swivel head (right/left) • Pendulum machining with central divider, max. workpiece length 1,773 mm with face machining on both ends (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum field, positioning and clamping via linear system (hydraulic release, mechanical clamping) Additional Information Additional Equipment High-speed package with motor spindle: 12,000 rpm, 140 Nm Production package: Scraper belt conveyor, discharge height 1,050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with high-pressure pump and control valve Rinsing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m³/h Rotatable viewing window left and right (1,400 mm from machine center) Automatic loading doors Central divider for pendulum machining 5-axis milling package Air blow-off Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, parts counter) Marposs (Brankamp) CMS100 collision monitoring system 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 hydraulic vices KOHN Multi 2000 MFS 125/680 HD Two-part operator stand across the entire working width of 6,000 mm With the 3 axes x, y, z and the swivel head, forms such as curves can be milled with the 5-axis milling software package. The software then synchronizes the axes.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: 640M Nexus, število osi: 4, Ta 4-osni Mazak NEXUS HCN 6000 je bila izdelana leta 2006. Opremljena je z Mazatrol 640M Nexus krmiljem, 800 mm pomika v oseh X, Y in Z ter rotacijo B-osi za 360°. Hitrost vretena dosega do 10.000 vrt/min, orodjarna pa ima 120 mest. Miza prenese obremenitev do 1.000 kg. Preverite možnost nakupa tega Mazak NEXUS HCN 6000 stružno-rezkalnega centra. Za več informacij nas kontaktirajte. • Rotacija B-osi: 360° • Velikost mize: 500 x 500 mm Guodpfeygl Ncox Aa Usc • Dovoljena obremenitev: 1.000 kg • Orodjarnik: 120 pozicij • Visokotlačno hlajenje: 70 barov Dodatna oprema • Odsesavanje ostružkov (transportni trak za ostružke) Tehnične specifikacije Konus ISO 50

Stanje: rabljeno, Leto izdelave: 2009, Tehnične podrobnosti: Gjdpfx Aaoyktvxj Ueuc Premer struženja: 1250 mm Dolžina struženja: 6000 mm Vretenska odprtina: 130 mm Območje vrtljajev: 5 - 710 min⁻¹ Premer struženja nad vozičkom: 850 mm Skupna priključna moč: 37/52 kW Teža stroja pribl.: 16 t Potrebni prostor pribl.: 12 x 4 x 2 m Ciklični krmilnik HEIDENHAIN 1 fiksna luneta

Stanje: dober (rabljeno), dimensions (l x w x h) approx.: 3550 x 2400 x 2300 mm Weight approx. 7000 kg Coil weight: 6000 kg Coil width: 1250 mm Max. coil diameter: 2500 mm Coil inner diameter: 480–510 mm Without control cabinet! Godpfxjhhyzcj Aa Ueuc

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Niles N 40 MC - 6000 stružno-rezkalni center, letnik 2019, krmiljenje Siemens SI 840 D SL, X/Z 850/6820 mm, os Y -200 / +400 mm, os B 0,001°, obratno območje osi B -105° / +95°, menjalnik orodja s 192 mesti, os C glavnega vretena 0,001°, hitrost vretena do 1750 min⁻¹, 2 prestavi, največja masa obdelovanca med vpenjalom in konjičem 6.000 kg, pogonska moč 87 kW, vpenjalni sistem HSK 100, luneta 70 - 425 mm, konjiček. Gusdpfx Aeyzd Rcea Uoc

Stanje: pripravljen za uporabo (rabljen), * Znamka: Hazemag * Model: vibracijski žleb Guedpoywnayefx Aa Usc * Dimenzije: dolžina 6000 mm - širina 1150 mm * Vključno: jeklena konstrukcija. * Pogon: 22 kW električni motor.

Stanje: pripravljen za uporabo (rabljen), * Znamka: Cyrus Gsdjywm Hlepfx Aa Usuc * Model: vibracijski žleb * Dimenzije: dolžina 6000 mm - širina 1200 mm * Z: dva vibracijska motorja po 7,5 kW vsak * Vključuje: vzmeti

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), - RABLJEN - REZKALNI STROJ S POMIČNO KOLONO PODOLŽNI HOD: 4500 mm PREČNI HOD: 1300 mm VERTIKALNI HOD: 1800 mm HITRI PODAJI L-T-V: 35 m/min VELIKOST MIZE: 6000 x 1100 mm VIŠINA MIZE OD TLA: 850 mm VRETENO: 20-4000 rpm; 37-43 kW; 900-1045 Nm; ISO 50 GLAVA: OSNA GLAVA ZA REZKANJE IN VRTANJE MAGAZIN ORODIJ: VERIŽNI TIP; 60 POZICIJ KRMILNA ENOTA: HEIDENHAIN TNC 640 TEŽA: 24800 kg SKUPNE DIMENZIJE: 6970 x 4310 x 4150 mm DODATKI: TRANSPORTER OSTRUŽKOV; LINEARNE LETVE; MERILNA Sonda OPOMBA: OPERATORSKA PLATFORMA Gjdpfx Aex Dfkgoa Ueuc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8712, Leto izdelave: 2015, obratovalne ure: 1.950 h, nosilnost: 5.000 kg, dvižna višina: 6.600 mm, prosto dvigovanje: 600 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.050 mm, dolžina vilic: 1.200 mm, lastna masa: 8.260 kg, skupna dolžina: 4.400 mm, vrsta pogona: Diesel, gradbena širina: 1.950 mm, Bočni viličar Št. šasije: 8712 Težišče tovora: 600 Širina vilic: 200 mm Debelina vilic: 50 mm ISO razred: ISO Razred 4 = 5.000 - 10.000 kg Tip droga: Triplex Hitrostni razred: 20 Stanje: Prenovljeno z garancijo Tehnično stanje: dobro Tip prednjih pnevmatik: zrak Gjdpfjx Ek Ayjx Aa Ueuc Velikost prednjih pnevmatik: 250-15 Stanje prednjih pnevmatik: 40 - 60% Tip zadnjih pnevmatik: zrak Velikost zadnjih pnevmatik: 250-15 Stanje zadnjih pnevmatik: 40 - 60% Opis: 4x nakladalni nosilci 1.800 mm, rotacijska luč in vzvratno opozorilo Ogrevanje, polna kabina,

Leto izdelave: 2005, stanje: rabljeno, Dolžina valjčnega transporterja: 6000 mm Guodpfjxbnxnox Aa Ujc Širina valjčnega transporterja: 300 mm Zaustavna loputa s skalo: Da