Hsm 155 Vl nakup rabljenega (55)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 103 USED HSM FA 400.2 Industrial Shredder in very good technical condition. This is one of the narrowest model classes of industrial shredders of this type. In addition to paper, it can also shred plastic cards, CDs, USB drives, and diskettes. Thanks to its robust construction, the machine offers high performance and long service life. Material intake from the feed table is handled by an electrically driven belt conveyor. Equipped with continuous operation and reverse buttons. Bsdew Axdmopfx Aa Sslc Automatic shutdown occurs if the waste bin is removed or full. Automatic reverse function in case of paper jams. Standard equipment includes a 460 l mobile trolley and a front shelf. Technical advantages: Hardened, one-piece steel cutting rollers, extremely powerful and energy-efficient motor designed for long continuous operation, with thermal protection. TECHNICAL DATA: Sheet capacity per pass (70g/m2): 130 Sheet capacity per pass (80g/m2): 104 Cut width: 5.8 mm Feed width (mm): 428 Motor power: 4000 Dimensions (H x L x W): 1650 x 1568 x 1157 WEIGHT (kg): 425

Stanje: rabljeno, HSM V-Press 605 Waste Paper Baler – used The HSM baler is a compact machine designed to reduce packaging waste volume by up to 95%. Suitable for compressing and baling cardboard (paper bags, waste paper, offcuts) as well as film (stretch film, foil bags), it enables efficient waste disposal. The baler features a graphic text display indicating the machine’s operating status and a large feed opening for loading waste. These features enhance operating comfort and make the baler intuitive and easy to use. Advantages of the HSM V-Press 605 Baler: • Compact dimensions – saves valuable space on site. • Pressing force of 57 kN (approx. 6 tonnes) – produces bales up to 70 kg with dimensions of 80 x 60 x 60 cm. • Low noise levels – 60.1 dB(A). • Retaining claws – increase loading volume, thereby boosting baling efficiency. • Mechanical bale ejector – facilitates easy bale removal. • Large feed opening – increases operator convenience. • Quick and simple installation. Offer details – HSM V-Press 605 Paper Baler: • Product code: MTP004168 • Condition: used • Year of manufacture: 2018 • Model: V-Press 605 • Width: 119 cm • Depth: 81.5 cm • Height: 198 cm • Weight: 485 kg Bjdpjwcpvaofx Aa Sjlc • Power: 1500 W • Voltage: 400 V Net price: €3,499 per unit * Large quantities available; price negotiable for bulk orders. * Delivery available across Europe. * Offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 12.078 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 30.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 98 kW (133,24 KM), volumenski pretok: 643 m³/h, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of manufacture: 2012 Total operating hours: 12,078 hours (as of September 2025) Pump operating hours: 6,616 hours (effective pump runtime) Number of bales pressed: 65,792 bales (as of September 2025) Main press force: 880 kN Bedpfoxcngnex Aa Selc Specific pressure: 120 N/cm² Cutter edge pressure relief force: 120 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idling): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 98 kW Total current consumption: 192 A Fuse protection: 250 A slow-acting Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/h Bulk density of 50 kg/m³: 32.15 t/h Bale weights at approx. 1.2 m bale length: 650 up to 750 kg per bale, material dependent Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor): 18,000 x 22,000 x 5,765 mm (L x W x H) Press weight approx. 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: - Access lock with key transfer system - Electro-hydraulic interlock of the press carriage during tying operation, to prevent press ram movement with highly expansive materials Additionally ordered special equipment: - Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motorization, at equivalent output - Manual activation/deactivation of the number of tying wires, to save strapping wire with non-expansive materials - Cutter edge relief with 121 kN press force - Wire monitoring by sensors, including press shutdown in the event of wire break or end of wire - Bale slide - Visual warning signal mounted on the control cabinet Condition of the press: The complete baling system (baler and conveyor system) is in good, ready-to-use condition. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2012 Drive power: 7.5 kW Conveyor speed: 0.05 – 0.4 m/sec Feeder belt length: 6,000 mm Feeder belt side wall height: 400 mm Incline belt length: 9,000 mm Incline belt side wall height: 800 mm Gooseneck length: 1,500 mm Incline: 30° Nominal belt width: 1,800 mm Usable belt width: 1,700 mm Belt quality: EP-500/4 Steel cleats on rubber belt: 50 x 50 mm Hollow pin chain, pitch: 125 mm, rollers: 36 mm Drive shaft height above ground: 4,284 mm Total conveyor height: 5,765 mm Transport dimensions feeder belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport dimensions incline belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit dimensions for conveyor: 14,765 x 3,260 x 1,250 (L x W x H) Scope of delivery: For sale: the feed conveyor, the baler with bale slide, and the wire feed stations, but without wire. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection possible by prior arrangement. We assume no liability for technical data or possible errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical data for the document shredding plant: Manufacturer: HSM GmbH + Co KG General data for the two-stage shredder system: Model: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 h Bedpfowrybrjx Aa Selc Throughput: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 – 53 mm Fuse: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Cutting width: 500 mm Particle size: 20 x 155 mm (W x L) Rated power (pre-shredder): 2 x 5.5 kW Rated current (pre-shredder): 2 x 11.5 A Secondary shredder data: Shredder type: P 500.2 Cutting width: 500 mm Particle size: 6 x 40 – 53 mm (W x L) Rated power (secondary shredder): 9.2 kW Rated current (secondary shredder): 18 A Security level according to DIN 66399: P-3, O-2, T-3, E-2 Baler data: Type: KP 100.1 Year of manufacture: 2015 Operating hours: 2,377 h Pressing force: 9 – 12 t Bale weight: 40 – 150 kg/bale, depending on material Cycle time: 7 – 16 sec Feed opening: 450 x 580 mm Bale size: 630 x 500 x 400–1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3,990 x 2,225 x 1,735 mm (L x W x H) Baler weight: approx. 1,000 kg Total system dimensions (conveyor, shredder, and baler): 9,560 x 2,071 x 3,550 mm (L x W x H) Function description: This is a complete plant consisting of a feed conveyor, a two-stage shredder system, and a horizontal baler. Material is fed via the conveyor, shredded in two steps, and subsequently compressed into stackable bales. A second cutting unit and various motors are available as spare parts. Remarks: The complete documentation (operating manual, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical details or possible errors.

Stanje: dober (rabljeno), mit Ständer und Gegengewicht Motorleistung 1,1 kW (900 U/min). Blsdpjd Hqvvsfx Aa Sjc Schleifspindel 310 x 250 mm. 2 Pressspindeln (mit Gummibelag), Durchmesser 30 mm. Maschinenabmessungen 505 x 350 x 655 mm. Gewicht 20 kg.