Holzkraft Sc 2 nakup rabljenega (165)

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Bsdehpmawopfx Apaodi Weight: 178 kg

Stanje: novo, Table spindle moulder HOLZKRAFT t 45c LL With table extension on both right and left sides, as well as extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, Max. spindle projection above table: 130 mm, Usable spindle length: 100 mm, Max. retractable cutter diameter: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Bsdpju U Rfpefx Apaodi Motor 400 V: 6.6 HP / 5.0 kW, Extraction port diameter: 2 x 120 mm - Special price - - New display machine -

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional version with quick-release saw blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional model with high dead weight for maximum smoothness of operation Exceptionally smooth and precise running thanks to the torsion-resistant machine frame Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilting mechanism with handwheel and rack Quick-release saw blade tensioning Precision saw blade guides Fast and precise cut height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shut-off when the door is opened Large cast-iron parallel fence Supplied as standard with mitre gauge Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Product length approx. 1190 mm Product width/depth approx. 820 mm Product height approx. 2063 mm Net weight approx. 377.7 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table(s) Work table length: 830 mm Work table width: 600 mm Work table height: 830 mm Table tilt: 0 – 45° Bodpfovk Sfbox Apajdi Note on table tilt: For safety reasons, from 20° a holding device/stop must be used to prevent the wood from slipping! Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 4.1 kW Cutting Ranges Max. cutting height 90°: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Saw Blade Saw blade speed: 1615 m/min Flywheel diameter: 630 mm Saw blade length: 4600 mm Saw blade guide: precision guidance above and below Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Holzkraft HBS Precision Bandsaws for Craftsmen – Top Quality, Workmanship and Price-Performance Ratio Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing Large cast iron saw table made from a single piece, with a precisely ground and polished surface Bdodpjvk Sd Dofx Apaji Quick-release blade tensioning via eccentric lever on the rear of the machine Standard with two cutting speeds Precise 3-roller blade guides, fitted as standard above and below from model HBS 351 upwards Rapid cutting height adjustment via rotary knob and rack-and-pinion with millimeter scale Smooth-running aluminium rip fence with eccentric quick-clamping and magnifier Standard mitre fence, adjustable by 60° to either side Aluminium rip fence with eccentric quick-clamping Technical Data: Worktable dimensions: 610 x 431 mm Cutting speed: 900 / 450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm / without fence: 410 mm Blade length: 3345 mm Precision 3-roller guide: above/below Table tilt: -10°, +45° Motor output: 1550 W / 400 V Weight: 130 kg Dimensions (mm): 680 x 512 x 2048 Extraction port diameter: 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, - New - with tiltable sanding unit and oscillating sanding belt, F-version for veneer sanding Description: - Sanding unit tiltable via lever up to 45° - Machine frame made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be switched on/off as needed - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for differences in belt length - With dual extraction ports - Extendable roller table extension - With rubberized sanding roller - Veneer edge sanding device with contact shoe featuring fine adjustment, relieving rollers, and stop rulers - With grooved infeed ruler for veneer overhangs - Quick changeover from veneer edge to solid wood sanding possible Technical Data: Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Extraction Connection Extraction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Longitudinal table height adjustment 230 mm Cross table minimum height 720 mm Electrical Data Connection voltage 400 V Network frequency 50 Hz Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Bdodpfxjvwgbws Apaji Item no. 5363001

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale Bodpfjdqzh Tjx Apasdi TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Bdedpeih Dxdsfx Apaei Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Bdodpohkzttsfx Apaei Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Bdjdpfshp Rcyjx Apasi Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Leto izdelave: 2025, stanje: novo, Rollers: 4 Roller width: 60 mm Bjdpfx Apog Ez Sqoasdi Roller diameter: 120 mm Spring deflection: 20 mm Speeds: 8 Stand: Tripod 1050 mm Motor power: 1 / 0.7 kW

Stanje: novo, The work table is made of heavily ribbed grey cast iron, and the base frame is of welded steel, ensuring excellent torsional rigidity and vibration-free operation. High-quality machine at a true entry-level price. Unique in this performance class: - Sliding table made of anodised aluminium for maximum cutting precision - Cutting line directly at the saw blade - Saw blade unit tiltable from 90 to 45° - Table extension with aluminium crosscut fence and adjustable fence flap for panels and large workpieces - Rip fence with round bar guide and fine adjustment - Powerful motor - Made in Europe Dimensions and weights Weight (net): approx. 170 kg Dust Extraction Connection Extraction nozzle diameter: 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Transport width: 680 mm Working area: 1600 mm x 2300 mm Space required: 2613.5 mm x 2134 mm Please add the stated measurements to the required space in order to determine the recommended free installation area for the machine. Dimensions take into account maximum travel paths or usable lengths. Electrical Data Connection voltage: 400 V Drive motor: 1.8 kW Phase(s): 3 Rated duty cycle: S6 Current type: AC Duty cycle (drive motor): 40% Bdodpfx Apevxr S Roasi Mains frequency: 50 Hz Sliding Table and Table Sliding table, format: 1140 mm x 200 mm x 70 mm Table: 1024 mm x 224 mm x 900 mm Circular Saw Unit Cutting width with rip fence: 700 mm Max. cutting height at 90°: 67 mm Max. crosscut width left of blade: 1200 mm Max. cutting height at 45°: 40 mm Edging length: 1200 mm Saw blade diameter: 250 mm Saw blade tilt: 90 - 45° Saw blade speed: 3900 rpm Scope of Delivery Table extension Anodised aluminium sliding table Rip fence with round bar guide and fine adjustment Aluminium flip stop Eccentric clamp Item no. 5504113

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Bdsdpfx Apocnw T Ieasi Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table Bsdpfovwf Ucex Apasdi - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Bdjdpfohp Rc Iox Apaji Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Bedjbuldyepfx Apasdi Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Bodpfxovwd U Io Apaodi Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: novo, Bandsaw HOLZKRAFT HBS 433 - Demonstration machine - Upper saw blade guide, Lower saw blade guide, Quick-release tensioning device via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm, Max. cutting height: 270 mm, Max. cutting width with fence: 370 mm, Max. cutting width without fence: 410 mm, Max. blade length: 3,345 mm, Bdodju R S Akspfx Apaei Table size: 610 x 431 mm, Table tilt: -10 to +45 °, Motor 400 V: 1.5 kW, Extraction port diameter: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 bandsaw blades (6 / 16 / 25 mm) - new demonstration machine -

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 533 S. Heavy-duty professional model with high dead weight for maximum smooth running Exceptionally smooth and precise operation thanks to a torsion-free machine housing Large, one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade guides Large cast iron parallel fence Fast and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch with automatic shut-off when door is opened Large cast iron parallel fence Supplied as standard with mitre gauge Flywheels made of cast iron with special coating on the running surfaces Inspection window for checking saw blade run Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance The tilt angle is continuously adjustable from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel Ø 530 mm Max. cutting height 350 mm Max. cutting width with fence 465 mm Bdedeb S Uzkepfx Apaoi Max. cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision guides top / bottom Table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Stanje: novo, – New – Description: TERSA quick-change system for tool-free, rapid planer knife changes Four-knife cutterblock delivering superior planing results Smooth operation due to precision engineering and heavy cast-iron construction Long surfacing tables for accurate jointing Robust surface tables made from ribbed grey cast iron, machined and stress-relieved for high durability and permanent flatness Large, stable aluminium surface fence with round-bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Auxiliary fence included as standard Powerful 5.0 kW industrial motor Bdjdjvwf Hrjpfx Apaei Stable steel and cast-iron construction Slot mortising attachment available as an option Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net weight: approx. 465 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Edging length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Bsdpjd Dtc Tefx Apajdi Saw blade tilt: 90° - 45° - Planer - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Bdjdoff Hdmepfx Apaji Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, - New - Description: - Vertical design for splitting short and meter-length timber - Sturdy and robust construction - Shock and scratch resistant due to high-quality powder coating - Quick, tool-free adjustment of the splitting height - Low base plate allows for easy, fatigue-free loading of large logs - Phase inverter included with all 400 V models - Convenient transport using the manual towing drawbar, thanks to the standard chassis with large pneumatic wheels and additional support wheel - Space-saving storage thanks to the easily lowerable cylinder - High-performance industrial hydraulic system - Two-hand safety control - Comes with log holding device Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Bdedpfxsvxr Ryo Apaei Drive PTO shaft speed: 540 rpm Machine Data Maximum splitting force: 23.4 t Minimum log length: 560 mm Maximum log length: 1100 mm Minimum log diameter: 80 mm Maximum log diameter: 350 mm Hydraulic System Hydraulic oil tank capacity: 24 l Item no. 5981023

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Bodpfx Apeih Dxlsaodi Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Bdodpfjff Hdpsx Apaoi Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Bedpocnxa Nofx Apaedi Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish