Hausach Tvori Tehnologije Gmbh nakup rabljenega (67.983)

Stanje: rabljeno, Leto izdelave: 2003, Crushes bottles by pressing them. - High crushing capacity - Significant volume reduction - Accident-proof (shatter-protected) - Low noise emission [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Machine (additional info): Bottle Crushing Plant Conti Crushing capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Voltage: 380V Frequency: 50Hz Length: 1,520 mm Width: 1,300 mm Height: 2,600 mm Hedpfovcqhxex Ag Tei Base construction: On domed feet Equipment: Cullet collection tray, noise protection enclosure, feed chute for manual disposal of individual bottles Weight: 700 kg

Leto izdelave: 2013, Stanje: rabljeno, Cold water degassing module. Suitable for integration into existing control systems. Machine (additional feature): Cold degassing Capacity: 50 hl/h Residual oxygen content: 0.03 mg/l Column volume approx.: 300 l Operating temperature: 95 °C Operation / Control: PLC / Visualization by customer Material: Stainless steel 1.4301 Hedpovcqqtjfx Ag Tei Base construction: Dome feet Equipment: Two-chamber column; Water pump; Control panel

Leto izdelave: 2006, Stanje: rabljeno, The VP 800 is a bottle depalletizer and palletizer designed for automatic operation, utilizing the set-pack principle. It is used in the beverage industry. Machine (additional info): Linear packer Performance: 5.5 kW Current: 10 A Voltage: 400 V Frequency: 50 Hz Length: 3000 mm Width: 1540 mm Height: 2600 mm Formats: 24 x 0.33 L Vichy Transport direction: right-to-left Operation/control: Simatic S7-99 Base construction: adjustable-height frame Equipment: approx. 3 m bottle outfeed; approx. 5.5 m crate infeed; approx. 4.5 m crate outfeed Hedpfx Asvcqgnog Toi Weight: 1100 kg

Stanje: rabljeno, Leto izdelave: 1991, Machine (additional details): 50,000 bph, crown cork Rated output: 50,000 bottles/hour Hodpovcqr Refx Ag Tei Formats: 0.33 l longneck, 0.5 l NRW bottles; crown cork Running direction: right to left Operation / Control: Siemens S5 Base design: level-controlled filler with return air tube Equipment: 120 filling stations, 24 capping stations, double pre-evacuation, high-pressure injection

Stanje: rabljeno, Leto izdelave: 2002, Machine (Additional): Crate Packer Capacity for Plastic Crates: 500 cycles/hour Power: 11 kW active power / 15 kVA apparent power Voltage: 230/400 V ± 5% Frequency: 50 Hz ± 2% Length: 4170 mm Hedpfx Agevcq Ace Tji Width: 2550 mm Height: 2650 mm Formats: Max. height: Product: 360 mm, Plastic Crates: 380 mm, Cartons: 500 mm Equipment: 2 heads for 20/24 bottles each, version with T-bottle table, processing only glass containers, quick-change device for format parts available, including full crate check, Krones Checkmat Weight: 4300 kg

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 1967, - leto izdelave: 1967 - proizvajalec: RIDINGER GmbH, Mannheim - kontakt: Krunoslav Alduk - cena: najboljša ponudba Hedpfx Agsykqg Uo Toi

Stanje: dober (rabljeno), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina pôvodu: Západné Nemecko (Kelberg / Eifel) Typ: Jednošnekový extrudér na plasty Dokumentácia: Súčasťou je originálny nemecký manuál a korešpondencia z roku 1987 Stav: Použitý, ale kompletný a funkčný Lokalita: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer šneku: 30 mm L/D pomer: 25 D Hlavný pohon: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot./min.) Prívod elektrickej energie: 3 × 380–420 V / 50 Hz Napájacie napätie ovládania: 220 V Hedpfoxu E E Ssx Ag Tei Chladenie: Sud vzduchom chladený so zónami ohrevu Riadiaca skriňa: Súčasťou, kompletne vybavená relé, ističmi a analógovými meradlami Popis Kompaktný jednošnekový laboratórny alebo maloprodukčný extrudér, vyrobený spoločnosťou Plastik-Maschinenbau GmbH v Západnom Nemecku. Navrhnutý na spracovanie termoplastov, testovanie materiálov, alebo pre malé extrúzne linky (napr. hadičky, profily alebo poťahovacie aplikácie). Dodáva sa s originálnou elektrickou skriňou, manometrom a dokumentáciou. Mechanicky aj elektricky kompletný; vyžaduje iba štandardné sprevádzkovanie.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travels: X-axis 600 mm Y-axis (swivel position) 600 (975) mm Z-axis 500 mm Control System: Siemens 840D control, side-mounted Feedrate/Rapid traverse: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Mean acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40%ED) Power: 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal side-by-side arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Hodeyl Sctspfx Ag Tji Motor spindles, liquid-cooled, AC technology Work Area: Swing carrier with ground gear, max. payload 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. payload 700 kg, speed 25 rpm Partition between machining and loading area Tool Magazine: 2 x 50 tools HSK-A 100 chain magazine Tool change time (chip-to-chip): 4.48 sec. Max. tool diameter: 100 mm 250 mm with free adjacent slot Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Centralized lubrication Minimal quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact belt filter Hydraulic unit Maintenance unit Water chiller Fully enclosed, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other: Very good condition Main-time parallel setup Available from December 2023/January 2024

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 Hjdpfx Asyl Scmeg Tei • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. Hjdpfx Agoymmtce Tsi The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, GWDress-250 smartline je inteligentna rešitev za natančno oblačenje brusnih plošč s premerom do 250 mm. Z izbiro ročnega ali avtomatskega krmiljenja se lahko postopki oblačenja izvajajo prilagodljivo in zelo učinkovito. Stroj je serijsko opremljen s popolno zaščitno ohišje, kar zagotavlja največjo varnost pri delu ter učinkovito zaščito pred prahom in hrupom. Prav tako je možno mokro oblačenje brez težav. Ključne prednosti: Kapaciteta: Za brusne plošče do Ø 250 mm Hodpfx Agsw E E S Ae Tji Avtomatizacija: Avtomatske pomične poti preko krmiljenja Upravljanje: Izbira med ročnim ali avtomatskim delovanjem Zaščita: Popolna zaščita za varnost, zaščito pred hrupom in prahom Vsestranskost: Oblačenje radijev ter paketov plošč Mokro oblačenje: Integrirana funkcija za mokro obdelavo Ekonomičnost: Odlično razmerje med ceno in zmogljivostjo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Stroj za dresiranje brusnih plošč: enostaven za uporabo, robusten in natančen Naš stroj za dresiranje brusnih plošč ponuja neprekosljivo kombinacijo preproste uporabe in izjemne stabilnosti. Masivno granitno ležišče zagotavlja najvišjo natančnost in dolgo življenjsko dobo, uporabniku prijazno upravljanje pa maksimira učinkovitost v vašem obratu. Medtem ko še naprej delate na brusilnem stroju za orodja, naša dresirna enota prihrani čas in denar. Hodpfjha Eh Hox Ag Tei

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination Hsdewkpx Ropfx Ag Tei • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) Hedpjuy H Nqsfx Ag Tji - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 60.000 obr/min, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, širina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, delovna dolžina: 320 mm, število osi: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format series, for small batches of large-format PCBs, and for cost-effective production. PCB materials with residual web connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled along all axes, with the milling drive positioned from above. The highlight of this machine is the easy and straightforward changeover of the working area from small (320 x 280 mm) to large format (320 x 560 mm). • Short cycle times through shuttle operation • X/Y axes use linear motor technology • Panel fixation by pin technology Hsdexmfdxjpfx Ag Tei • Flexible handling • Suitable for PCBs with residual web connection • Milling spindle adjustment with servo technology • Integrated extraction unit • Easy operation • Excellent price-performance ratio Manual Depaneling – Flexible and Cost-Effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost efficiency. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Dual loading via linear motor technology comes as standard; to enlarge the working area, single-shuttle operation is possible. Its maintenance- and operator-friendly design, combined with the outstanding price-performance ratio, ensures comfortable operation, making the investment in this depaneling machine economically beneficial. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm

Leto izdelave: 2026, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 XL is specifically designed for medium to high product volumes and meets increasing demands in the production process. PCB panels of various material types are separated using low-dust and low-stress sawing and milling technologies, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, tooling, and grippers satisfy the highest quality standards and guarantee long service life and reliability for the depaneling solution. Semi-automatic Depaneling – Solutions on Demand The LOW 4322 XL depaneling machine allows for rapid product changeover while maintaining short separation and handling times. Panelized PCBs are loaded via a parallel shuttle, clamped using pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module configured as a parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors – left and right. ESD • Standard vision system base module for teach-in programming • Working area: 520 x 480 mm • Automatic milling cutter length processing • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including protocol • Air ionization Hodpfjvuw R Rex Ag Tei • Milling cutter breakage monitoring (shaft milling cutters only) • Prepared for vacuum clamping technology • ESD powder coating, RAL 9002, including window and sliding doors An optional dust extraction unit can be offered retrospectively.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23 mit integrierter Absaugung, The LAS 23 portable is a compact and mobile fiber laser designed for flexible direct marking of a wide range of workpieces directly at the site of use. Thanks to its wheeled base frame, the system can be deployed independently of location and can easily be moved to hard-to-reach or large-volume workpieces. This makes it particularly suitable for applications where a stationary laser cell is not practical. The modular design with custom-made attachments allows for quick, tool-free adaptation to different workpiece geometries. The quick-change system enables fast replacement of attachments – ideal for varying marking tasks in production and maintenance. The integrated laser software supports the creation of texts, numbering, 2D codes (e.g., DataMatrix, QR codes), and graphic elements (e.g., logos) through a user-friendly interface that requires no programming knowledge. Serial and part numbers can be automatically incremented. Additionally, there is the option to import variable data – such as drawing numbers or project designations – from external tables (e.g., CSV/Excel files) and automatically integrate them into the marking template. Hodpfx Ajvyc Rmog Tsi An optional hand scanner can be connected for fast data capture, reducing manual input and increasing process reliability. Made in Germany • Fiber laser 20W (optional 30W, 50W) • Laser class 1 • CE-compliant, according to EU directives • Wavelength 1064nm • Marking area 70x70mm (optional: 110x110mm) • Signal light for indicating operating status on the hand unit • Marking software EZCAD (other software options available) • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. Thanks to its integrated fiber laser, you can mark nearly all materials, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, utilizing a laser for permanent marking has become indispensable. The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming knowledge required. The software can automatically increment serial and article numbers as preset. In addition, it can import data (such as drawing numbers, project labels, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (larger sizes optional) • Signal lamp indicating operational status Hodpfjwlc Stex Ag Tsi • Options: rotary axis (3-jaw chuck) • Options: extraction unit (including activated carbon filter) • Options: digital height measuring system • Options: autofocus system for automatic focus adjustment • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC running Windows • Height-adjustable monitor and keyboard mount • Frame made of aluminum profiles • Air-cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. The use of lasers for permanent marking has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Lot and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are available. Programmable, software-controlled axes (X, Y, Z axes) and database connectivity are also possible. Made in Germany Fiber laser: 30 W, 20 W or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optionally available) • Marking software: EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic focal distance determination • Optional: programmable X, Y, and Z axes (software-controlled) Hedpfowkpvvex Ag Tji • Pilot laser (easy preview, contour preview) • Focus finder (for easy focus adjustment) • Signal beacon for operating status display • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard support • Frame made of aluminum profiles • Air cooled • Door width approx. 700 mm / Pass-through door height: 400 mm • 230 V power connection • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) Hodpsv Sybysfx Ag Tsi • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2025, obratovalne ure: 2 h, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) Hjdpfx Agoqfcvij Tsi • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Leto izdelave: 2026, obratovalne ure: 1 h, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 560 kg, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, skupna višina: 1.550 mm, priključek za stisnjen zrak: 6 letvica, natančnost pozicioniranja: 0,01 mm, natančnost ponavljanja: 0,01 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic LOW 4322 depaneling system is specifically designed for medium to high production volumes and meets evolving requirements in the manufacturing process. PCB panels made from a variety of materials are separated with maximum flexibility, precision, and throughput using low-dust, low-stress sawing and milling techniques. High-dynamic linear motor axes, cutting tools, and grippers meet the highest quality standards, ensuring the depaneler’s longevity and reliability. Made in Germany Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 depaneling system enables rapid product changeover while maintaining short separation and handling times. Panel loading is achieved with a parallel shuttle, clamping and fixing with pin tension technology, and, if necessary, in combination with vacuum suction cups. This machine is equipped with: • A shaft and disc tool separation module on Z-axis (automatically rotatable 0–90°) • X-Y cross-cut module with linear motor technology and high-resolution measuring system • Dual loading module built as a parallel shuttle, separated left and right with sliding doors • Aluminum profile frame with two maintenance doors (left and right) • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area: 420 x 330 mm • Automatic router length compensation (only in conjunction with shaft separation module) • Remote maintenance/support via remote connection (TeamViewer) or customer-side provision • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Router breakage monitoring (shaft routers only) • Prepared for vacuum clamping technology • ESD window and sliding doors Hjdpfjxt Dmxsx Ag Tsi A dust extraction unit can be offered as an optional retrofit. The high performance of the depaneler, with standard sawing or milling module, fully automatic router length compensation, camera-assisted teach-in system, and two easy-to-load PCB fixtures, can be further enhanced with various customer-specific options and features (e.g. camera vision system). Precision laser axis measurement prior to commissioning is included as part of the premium customer service for all inline and stand-alone depaneling systems from Systemtechnik Hölzer.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Sales only within Europe, including Turkey Hedpfx Ajwydkaog Tsi Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. Hedpfswg Hlasx Ag Toi We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: novo, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KR 210 R2700 prime, Grunddaten KR 210 R2700 prime Achszahl: 6 Anzahl der gesteuerten Achsen: 6 Arbeitsraumvolumen: 55 m³ Wiederholgenauigkeit (ISO 9283): ± 0,06 mm Eigengewicht ca.: 1111 kg Nenntraglast: 210 kg Maximale Reichweite: 2696 mm Schutzart: IP65 Schutzart (Handgelenk axial): IP65 Geräuschpegel: < 75 dB(A) Montageposition: Boden Aufstellfläche: 830 mm x 830 mm Zulässige Neigung: ≤ 5° Standardfarbe: Grundrahmen Schwarz (RAL 9005); Bewegte Teile: KUKA Orange 2567 Steuerung: KR C4 Transformationsbezeichnung KR C4: KR210R2700 PRIME C4 FLR Hohlwellendurchmesser A1: 139 mm (teilweise durch Motorkabel belegt) Feuchtigkeitsklasse (EN 60204): - Klassifizierung der Umgebungsbedingungen (EN 60721-3-3): 3K3 Umgebungstemperatur: Betrieb 10 °C bis 55 °C (283 K bis 328 K), Lagerung/Transport -40 °C bis 60 °C (233 K bis 333 K) Achsdaten, KR 210 R2700 prime Bewegungsbereich: A1: ±185° A2: -140° / -5° A3: -120° / 155° A4: ±350° A5: ±122,5° A6: ±350° Geschwindigkeit bei Nenntraglast: A1: 105 °/s A2: 107 °/s A3: 114 °/s A4: 136 °/s A5: 129 °/s A6: 206 °/s Traglasten, KR 210 R2700 prime Nenntraglast: 210 kg Nenn-Massenträgheitsmoment: 105 kgm² Nenn-Zusatzlast (Grundrahmen): - Max. Zusatzlast (Grundrahmen): - Nenn-Zusatzlast (Drehkolonne): - Max. Zusatzlast (Drehkolonne): 300 kg Nenn-Zusatzlast (Verbindungsarm): - Max. Zusatzlast (Verbindungsarm): 130 kg Hsdpfxeyl Ux Do Ag Tei Nenn-Zusatzlast (Arm): 50 kg Max. Zusatzlast (Arm): 150 kg Nomineller Abstand zum Lastschwerpunkt: Lxy: 270 mm Lz: 240 mm Das Überschreiten der angegebenen Trag- und Zusatzlasten verkürzt die Lebensdauer des Roboters und kann zu einer Überlastung von Motoren und Getrieben führen. Wir empfehlen, jede spezifische Anwendung mit KUKA.Load zu prüfen. Bei Überschreitung einzelner Werte ist Rücksprache mit KUKA Roboter GmbH erforderlich.