Gnojilo Distributer nakup rabljenega (1.905)

Stanje: dober (rabljeno), Injector, cyclone, distributor for filtration system, chip extraction, dust extraction, extraction unit, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone section: Ø 465 mm -Material: aluminium -Transport dimensions: 493/465/H495 mm Fgedpoffphbjfx Apleb -Weight: 13 kg

Stanje: dober (rabljeno), Injector, cyclone, distributor for filter unit, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Fgsdpfxsffphco Aplsb -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: aluminium -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Stanje: novo, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power range, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module in the pitch system and is responsible for the precise and rapid adjustment of the rotor blade pitch angle. This assembly is therefore a safety- and performance-relevant key component, making a significant contribution to yield optimization, load control, and operational reliability of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the turbine’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM parts of the highest manufacturing and engineering quality are used here. The type ZCH 565227 is used in several current Siemens wind turbines and is considered a critical component for preventing unplanned shutdowns. Technical Data • Manufacturer: Siemens • Type / Part number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch system • Turbine models: including Siemens SWT-3.6-107 Onshore • Power class: approx. 2–4 MW Fjdox Tftiepfx Aplogb Condition & Scope of Delivery • Condition: New, unused, original packaging • Availability: 4 units available immediately • Delivery: Europe-wide shipping possible These Blade Blocks are ideal as strategic spare parts, to secure turbine availability, or for planned maintenance activities. For technical inquiries, serial number verification, or short-notice transactions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, delovna širina: 400 mm, Kompaktni stroj za nanašanje / poliranje Proizvajalec: Sarmax Fgsdjxyvq Njpfx Aplob Leto izdelave: 2016 Stroj za nanašanje in poliranje olja ali lazure na masivne lesene pode, parket itd. Delovna širina cca 400 mm 1x polirna enota s padom, brezstopenjsko nastavljiva hitrost 1x krtačna enota, brezstopenjsko nastavljiva hitrost Višinsko nastavljanje vsake enote ročno preko ročnega kolesa Podajanje brezstopenjsko nastavljivo Priključek: 380 V Dimenzije: 1600 x 1100 x 1700 mm Teža cca 400 kg

Stanje: novo, Samopogonski razdelilnik betona. Prostornina korita: 2 m³, 3 m³ in 4 m³ (na voljo tudi druge velikosti). Na voljo z različnimi opcijami, kot so zaprta kabina, vzvratna kamera, popolnoma zaprti pokrovi za betonsko vreteno, drsni zaporni ventil. Več informacij na povpraševanje. Fodpfx Apex Ap Awslogb

Stanje: rabljeno, Ta oglas je za Scientific Industries Distruptor Genie SI-D266 s časovnikom. Fodpexzh Ngjfx Aplsgb

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Fedpfxjyhbt Ho Apljgb Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, Model: C3 Delovno območje: 3048 mm × 1524 mm Izhodna moč laserja: 40 kW / 30 kW / 22 kW / 20 kW / 12 kW / 6 kW / 3 kW / 2 kW / 1,5 kW Natančnost pozicioniranja: ±0,05 mm Ponovljivost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 110 m/min Maksimalno pospeševanje: 1,5 G 1. Aktivna funkcija proti trkom Učinkovito zmanjša stopnjo poškodb laserskih glav in pomaga znižati stroške vzdrževanja. Fgodpfsg Iwypsx Aplob 2. Eno-klikovno obdelovanje Vse funkcije sistema so logično in pregledno razporejene, kar omogoča popolnoma avtomatizirano serijsko proizvodnjo. 3. Brez tresljajev pri rezanju tankih pločevin Serija C omogoča rezanje robov tankih pločevin brez vidnih sledi tresljajev. 4. Raztegljiv aluminijasti prečni nosilec Togost povečana za 60 % Teža zmanjšana za 20 % Hitrost delovanja opreme povečana za 50 % 5. Varjena postelja z utorno-spojnim sestavom Vsak okvir postelje je varjen po utorno-spojnem sestavu, kar zagotavlja boljšo stabilnost in trdnost.

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Fgjdpfx Aexyktleplsb Machine (additional info): Rotary blow molding machine Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: LC625, Used ALFA LAVAL S16 Olive Oil Line – Year of Manufacture 2010 Technical Specifications & Performance Data This complete olive oil extraction line combines proven components to ensure continuous, efficient processing of olive paste into high-quality oil. Designed around Alfa Laval core technology and complementary equipment, it offers industrial throughput capacities with reliable separation and thermal conditioning. Capacity: 2.5–3 t/h (tonnes per hour) olives Year of Manufacture: 2010 Main Manufacturer: Alfa Laval Decanter: Alfa Laval S16 Separators: Alfa Laval 507 (2 units, with support frame) Crusher: Alfa Laval, 25 HP Washing Unit: Santoro washer with destoner Fgedjy Iz Tuepfx Apleb Malaxer: 4 units, stainless steel, 500 L each, independent discharge Paste Pump: Bellin, stator size 16 Inclined Conveyor (Belt): Alfa Laval Screw Conveyor (Pomace conveyor): Officine Mottola Thermal Unit (Boiler): D’Alessandro Termomeccanica CS 130, rated at 130 kW Heat Exchanger: Hot water heat exchanger for thermal conditioning Control Panels: Main power cabinet and dedicated pump control cabinet Electrical Data (Boiler): 380 V, 50 Hz, power consumption 0.42 kW Standards: CE components; boiler EN 303-5 class 3 Advanced Automation & Control Systems The line features central power distribution via a main cabinet and a dedicated pump control cabinet for modular plant control. Operators benefit from straightforward management of feeding, crushing, malaxing, decanting and separation stages. Safety interlocks and standard guarding on rotating parts and hot water circuits ensure consistent, safe operation. Quick mechanical adjustments allow fine-tuning of malaxing time and temperature settings for optimal extraction output and product quality. Integration Options in Production Lines Designed for continuous extraction, this used processing plant integrates upstream reception and washing with downstream decanting and polishing. Inclined conveyor, washer/destoner, and crusher provide uniform paste preparation, while decanter and dual separators deliver oil of high clarity. The system can be linked to storage tanks, filtration skids, or a used edible oil bottling line to enable complete industrial packaging processes. Flexible piping and standard connections simplify integration into existing food and beverage production plants. Machine Condition & Maintenance History This is a complete, used olive oil extraction line offered in working condition; core process equipment dates from 2010. Components from leading manufacturers such as Alfa Laval, Santoro, Bellin, Officine Mottola and ...

Stanje: rabljeno, številka stroja/vozila: LC426, Used KRONES bottling line for glass bottles up to 20,000 bph (bottles per hour) Introduction to the KRONES bottling line The used KRONES bottling line for glass bottles is in high demand in industrial settings thanks to its reliability and efficiency. Comprising a series of premium components, the complete KRONES bottling line ensures smooth operation and effectively meets the rigorous demands of high-volume production. Main Components At the forefront is the KRONES K-131-669 filling monoblock, built in 2016, which forms the core of the entire line. With an impressive output of 20,000 bottles per hour, it is complemented by the KRONES 472-072 depalletizer from 1998 and the Gronemeyer RINSER 8983-400-4 from 2000. This setup enables smooth and continuous workflows from bottle unloading through to the filling process in the complete KRONES bottling line. Fgodovgvwmopfx Apljb Quality Control of the Used KRONES Bottling Line Ensuring product quality is a top priority in any bottling facility. Accordingly, the KRONES CHECKMAT inspector from 1999 plays a key role within the line. Equipped with advanced features for both fill level control and meticulous label inspection, it ensures that every product meets required standards. Additionally, the ACI TA20 2 AE bottle dryer from 2000 guarantees bottles are impeccably prepared for subsequent labelling and packaging stages while effectively eliminating moisture-related issues. Labelling and Packaging Efficient labelling and packaging are essential parts of the KRONES bottling line. The KRONES STARTMATIC K-080-669 from 1999 performs exceptionally in these areas, delivering precise label application and the capability to print directly onto glass bottles, thereby streamlining workflows and enhancing brand presentation for glass bottles up to 20,000 bph. This is further supported by the SMI SMI/7507 case packer from 1999 and the FRANPACK Type 121971214 pallet wrapper from 1997, both ensuring products are safely packaged and ready for shipment. Operational Condition and Specifications The KRONES bottling line is in excellent operating condition and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the system promises to boost operational efficiency while maintaining product quality. It is specifically designed for glass containers and mainly geared towards beer production, ensuring precise and consistent fills which result in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a solid investment for companies seeking to optimize their filling processes. With robust construction, state-of-the-art features, and proven performance, it is ready to deliver outstanding results and take production standards to the next level.

Leto izdelave: 2019, stanje: rabljeno, Used machine Year of manufacture: 2019 - Printing bed size: 2500 x 1300 mm or 2500 x 3100 mm (Model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/hour (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: 1-liter ink bottles can be easily replaced from the front for much faster refilling - User-friendly operation – trouble-free alignment: Equipped with locating pins and a printed measuring tape for precise positioning of media on the print table. Register pins secure the material from slipping. The measuring scale allows easy adjustment of layout and RIP data to the position - Greater flexibility through direct printing on thick media: Prints on boards up to 50 mm thick - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents white ink sedimentation - Mimaki Clear Control (MCC): For gloss finishes – reduces dust adhesion and the formation of microbubbles by simultaneously reducing the ink drying time and UV light exposure. This achieves both glossy and stylish matte surfaces. Multiple layers of clear varnish can also be used to create raised, multi-dimensional print effects - Convenient ink selection: - LH-100 rigid UV ink for all smooth surfaces with high scratch-resistance, color brilliance, and solvent resistance - LUS-150 flexible UV ink for smooth and uneven surfaces, approx. 150% stretchable, suitable for various substrates - White ink as image underlay reduces light show-through - Two-layer printing with white ink on clear and colored substrates - Print finishing with glossy or matte lacquer coats Fjdpfey Nugqex Aplegb - Environmentally conscious printing: No emission of harmful substances thanks to UV printing technology. Lower energy consumption and longer service life due to UV-LED lamps - RasterLink 6: - Powerful RIP supports excellent color reproduction - Different print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons for quick navigation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeat use - The printing process is monitored directly in the main window - Software can be updated online at any time; profiles can be downloaded or updated Printing technology: Piezo Inkjet Print heads: 2 staggered heads Max. print format (W x L): 2500 × 1300 mm Max. material format (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg (with even weight distribution) Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down via vacuum Number of vacuum zones: 2 sections (along the X-axis) Accuracy: Absolute ± 0.3 mm or ± 0.3% of the specified distance (whichever is greater) Repeatability: ±0

Stanje: rabljeno, Profesionalna pekovska peč Friedrich Solingen s 4 etažami je zanesljiva in učinkovita rešitev za intenzivno pekovsko proizvodnjo. Večetažna zasnova omogoča hkratno peko različnih izdelkov z enakomerno porazdelitvijo toplote in stabilno zmogljivostjo. Peč je opremljena s pokrovom, ki izboljšuje prezračevanje in odvod pare, kar povečuje kakovost peke in delovne pogoje. Zahvaljujoč zmogljivemu grelnemu sistemu in robustni konstrukciji zagotavlja dosledne rezultate in dolgo življenjsko dobo. Model je primeren za peko kruha, peciva in drugih izdelkov iz testa ter nudi visoko produktivnost in zanesljivost pri vsakodnevni uporabi. Tehnične specifikacije: Proizvajalec: Friedrich Solingen Fedpfx Apjy Na Uyolsgb Tip stroja: Pekovska peč s 4 etažami Dodatna oprema: Pokrov Dolžina peči: 1241 mm Širina peči: 975 mm Moč: 22 kW Napajanje: 400 V / 50 Hz

Stanje: rabljeno, Profesionalna pekarska peč Miwe s fermentacijsko komoro predstavlja idealno rešitev za sočasno peko in vzhajanje testa pod nadzorovanimi pogoji. Naprava zagotavlja optimalne rezultate peke zahvaljujoč enakomerni porazdelitvi toplote in natančnemu nadzoru procesov. Fermentacijska komora nudi idealne pogoje za vzhajanje testa, kar prinaša izboljšano kakovost izdelka, strukturo in volumen. Peč je primerna za pripravo različnih pekarskih izdelkov, kot so kruh, pecivo in drugi izdelki na osnovi testa. Robustna konstrukcija in profesionalna izdelava zagotavljata zanesljivo delovanje, dolgo življenjsko dobo in enostavno vzdrževanje, kar to peč naredi odlično izbiro za vsakodnevno uporabo. Tehnične specifikacije: Proizvajalec: Miwe Tip stroja: pekarska peč s fermentacijsko komoro Zunanje dimenzije: 90 x 83 x 210 cm Notranje dimenzije: 60 x 40 cm Kapaciteta: 8 pladnjev (60 x 40 cm) Moč: 14 kW Napetost: 400 V / 50 Hz / 3 N PE Fgjdpey Nap Dsfx Aplsb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Bodor, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Bodor, Model: C12 Working area: 12,500mm x 2,600mm Laser output power: 40kW / 30kW / 22kW / 20kW / 12kW / 6kW / 3kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1. Economical Full-Enclosure Fiber Laser Sheet Cutting Machine Maximum cutting area up to 12,000mm x 2,600mm, suitable for a variety of cutting applications. 2. Active Anti-Collision Function Effectively reduces laser head damage rates, helping you save on maintenance costs. 3. One-Click Processing All system functions are logically and neatly arranged to enable fully automatic mass production. 4. No Chatter When Cutting Thin Sheets The C series can cut thin sheet edges without leaving vibration marks. 5. Extendable Aluminum Gantry Rigidity increased by 60% Weight reduced by 20% Equipment running speed increased by 50% Fjdpfxeg D Ny Ts Apljgb 6. Welded Bed with Mortise and Tenon Joint Each machine bed frame is welded after mortise and tenon joining to achieve greater stability and rigidity.

Stanje: rabljeno, prevoženi kilometri: 156.000 km, moč: 120 kW (163,15 KM), prva registracija: 08/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 08/2026, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 5.267 mm, skupna širina: 2.020 mm, skupna višina: 2.332 mm, dolžina tovornega prostora: 2.650 mm, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Special equipment: Hill start assist, 13-pin trailer socket, armrest, driver's and passenger's door, DAB tuner (digital radio reception), roof light in cargo area with door contact, entry handle on rear right C-pillar, driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls above front headliner, front cup holder, radiator grille frame in vehicle colour, instrument panel load package (additional USB ports and 12V socket), LED cargo area light, cable duct on rear portal, cable duct on side wall, MBUX multimedia system (7" touchscreen), navigation system for MBUX multimedia system, fog lights with cornering function, smoker's package, reversing camera, windscreen wipers with rain sensor, seats in cab: dual passenger seat, seats in cab: comfort suspension seat, driver's side, rear door step, lashing rails in cargo area – side wall on waistline, AGM battery 92 Ah, tachograph pre-installation, jack, heat-insulating glazing (windscreen with top band filter) Additional equipment: 3rd brake light, storage compartment above windscreen, storage compartment below passenger side dashboard, adaptive brake light, driver's airbag, traction control (ASR), washer fluid level display, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, roof lining in cab, automatic driving light activation, entry handle for sliding door on cargo area partition wall, electronic brake force distribution (EBD), driver assistance system: Crosswind Assist, rear door (180-degree opening angle), body/build: standard panel van, keyless start, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 litres, continuous cargo area partition, adjustable steering column (manual), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 litres – 120 kW CDI CAT, wheelbase 3250 mm, low emissions according to Euro 6 standard, sliding door loading/passenger area right side, driver's side seatbelt system with warning device, seat upholstery: fabric, engine start/stop system, service interval display Assyst, permissible gross weight 3.5 t, rain sensor. Fsdpfxsy Rbqxj Aplsgb

Stanje: rabljeno, prevoženi kilometri: 501.348 km, moč: 279 kW (379,33 KM), prva registracija: 02/2013, vrsta goriva: dizel, vrsta prenosa: polavtomatski, emisijski razred: Euro 5, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, računalnik na krovu, sistem za imobilizacijo, tempomat, Scania P380 hladilna šasija 6x2 z priklopnikom s osrednjo osjo – popolna hladilna kompozicija Fsdpfjy Etc Asx Apljgb Vozilo za vleko: Scania P380 hladilna šasija Prva registracija: 12.02.2013 Moč: 279 kW (380 KM) Prostornina motorja: 11.705 ccm Diesel Hladilna nadgradnja s Frigoblock FK25SL Dolžina nakladalne površine: cca 8.100 mm Dovoljena skupna masa: 25.000 kg Nosilnost: 12.645 kg Priklopnik: Scheuwimmer priklopnik z osrednjo osjo Proizvajalec: Scheuwimmer Tip: FT 1119 Prva registracija: 12.02.2013 Popolna hladilna kompozicija, takoj pripravljena za uporabo Robustna in zanesljiva tehnika Idealno za distribucijski promet ali izvoz Možne napake, tipkarske napake ter vmesna prodaja Ogled možen kadarkoli po dogovoru Za več informacij nas kontaktirajte po telefonu ali sporočilu.

Stanje: rabljeno, prevoženi kilometri: 106.000 km, moč: 70 kW (95,17 KM), prva registracija: 03/2019, vrsta goriva: dizel, skupna masa: 2.800 kg, naslednji pregled (TÜV): 11/2027, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 4.999 mm, skupna višina: 1.971 mm, dolžina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 1.340 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Opel Vivaro Panel Van 1.6 L – 70 kW with racking system and good equipment for trades and businesses, e.g. as a workshop or service vehicle Fedpfx Apjyycn Rslsgb Würth workshop/racking system installed (details below) Service booklet maintained by authorized Opel dealer (see below) Alarm system Permissible gross weight: 2.8 t 3 seats (driver seat and double passenger bench) Steel bulkhead, full height Rear parking sensors (PDC) Additional reversing camera, monitor integrated in interior mirror Air conditioning Cruise control On-board computer Multifunction steering wheel Radio remote control near steering wheel Audio system Radio R 16 BT - FM/AM radio - USB, AUX-IN, Bluetooth connectivity - Hands-free kit for mobile phone via Bluetooth Comfort package - Automatic headlight control (light sensor) - Automatic windshield wiper control (rain sensor) Electric package - Electrically adjustable and heated exterior mirrors (both sides) - Electric windows (both sides) Central locking with remote control Fog lights Daytime running lights Spare wheel with matching tire and jack Special socket for spare wheel carrier (theft protection), located in glovebox Speed limited to 130 km/h Driver assistance systems: - Brake assist - ABS, ASR, ESP - EDS electronic differential lock Rear hinged doors without windows (180-degree opening angle) Sliding door on right side of load space Body/construction: panel van, standard cab L1H1 Wheelbase: 3,098 mm Steel wheels 6.5x16 Cab floor: plastic covering Steering column adjustable in height and reach Driver seat with multiple adjustments: seat height, backrest, lumbar support Folding armrest on driver seat Cloth seat upholstery Engine: 1.6 L – 70 kW CDTI 6-speed manual transmission Fuel tank: 80 L Thermal insulation glazing Cargo area fitting: Würth workshop installation with 4 tension rods (similar to Aluca, Bott, Sortimo). Left side: long shelving unit with shelves, drawer, and 2 pull-out trays. Full-height steel bulkhead without window. Durable plastic-coated wooden floor. For load securing, special fastening rails are installed (in the floor, on the ceiling (for tension rods), on the partition and on the shelving), as well as lashing rings distributed in the cargo area. Bright LED interior lighting. Walls panelled throughout with hard fibreboards. 12V socket (right C-pillar inside). Cargo dimensions (all approx., in cm): Length: - Floor: 252 - Middle/top: 225 Height: 134 Tyres: Winter tyres 205/65 R 16 on steel wheels approx. 5 mm tread rear; front all-season tyres 7 mm and winter tyres 5 mm Maintained by Opel authorized workshop, service history: 05/2021 at 37,079 km: Inspection with oil change 11/2022 at 61,290 km: Oil change 09/2023 at 73,848 km: Inspection with oil change 03/2024 at 82,801 km: Oil change 09/2024 at 91,682 km: Oil change Service currently due Despite careful processing, there may be errors in data entry and transmission, including in the vehicle description and images. Subject to errors and prior sale. The vehicle can be inspected by Dekra or TÜV upon request.

Stanje: rabljeno, prevoženi kilometri: 126.000 km, moč: 130 kW (176,75 KM), prva registracija: 12/2019, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 02/2028, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, skupna dolžina: 6.154 mm, skupna širina: 2.040 mm, skupna višina: 3.080 mm, dolžina tovornega prostora: 3.280 mm, višina nakladalnega prostora: 1.820 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, The Extra Special Beautiful and well-maintained VW Crafter Panel Van 35 4Motion (all-wheel drive), medium wheelbase high-roof L2H2, with comprehensive equipment for crafts and trade, e.g. as a service vehicle / workshop van. Workshop/Shelving installation by Sortimo (similar to Aluca, Bott, Würth – details see below). - 8-speed automatic transmission - All-wheel drive (4Motion / 4M / 4WD / 4x4) - Suspension: reinforced dampers and stabilizers, front and rear - Underbody aerodynamics package - Tow bar with 3.0 t towing capacity - Roof rack - Auxiliary heater / stationary heater, programmable with remote control - Seat heating (driver & passenger) - Climatic air conditioning with pollen filter Driver assistance systems: - Rear view camera - Cruise control with speed limiter - Hill start assist - Crosswind assist - Trailer stabilization - Brake Assist (HBA) - ABS, ASR, ESP Driver’s seat ErgoComfort with fold-out armrests, multi-adjustable: - Seat height, seat tilt, backrest, lumbar support (multi way electrically adjustable) Passenger seat with adjustable backrest Fabric seat upholstery Audio-navigation system Discover Media (touchscreen color display) - FM radio / CD player, SD card slots in glove compartment - USB, AUX-in, SD card, Bluetooth audio - Bluetooth hands-free system - Mobile online services Car-Net - App-Connect (Android Auto & Apple CarPlay) - Voice control (for radio, navigation, media, telephone) Multi-function display Plus / on-board computer Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Side marker lights All-round warning beacons Fog lights with cornering function Trendline equipment package Driver and passenger airbags 2nd battery with isolation relay 7x 12V sockets in the cab Tinted glazing in the 1st row, both sides Sliding side door cargo area right with tinted glazing Rear wing doors with tinted glazing, heated, wiper, 270-degree opening angle Wheelbase 3640 mm High roof, medium wheelbase L2H2 N1-commercial registration Engine: 2.0L – 130 kW TDI Adjustable steering wheel Overhead storage shelf front cabin Rear right step Entry handles on A and C-pillar Tire repair kit Heat-insulating glazing Cargo compartment partition with door and window, located behind the side sliding door. Front cargo area equipment: Sortimo shelving on the left, with storage compartments, drawers (10x), and desk/workbench. Wooden floor. LED lighting. Rear cargo area equipment: Sortimo shelving on both sides with storage compartments, drawers (12x), case shelves (8x, cases not included). Wooden floor. Load securing: mounting rails and lashing eyes. Wall paneling. Ventilation system. LED lighting. Electrical installations: External 230V socket (input). 8x 230V sockets distributed throughout the vehicle, protected. 230V / 700W power inverter. Charger for the second battery. Cargo compartment dimensions: Front: - Length approx. 150 cm - Height approx. 182 cm Rear: - Length approx. 178 cm - Height approx. 182 cm Full VW service history: 11/2020 @ 21,520 km: Oil change 10/2021 @ 42,268 km: Inspection + pollen filter 11/2022 @ 65,659 km: Inspection + oil change + Haldex coupling oil change + brake fluid 12/2023 @ 87,117 km: Inspection + oil change + air filter 12/2024 @ 106,917 km: Inspection + oil change + brake fluid + fuel filter + pollen filter 10/2025 @ 126,000 km: Front brakes (discs and pads) replaced + Inspection currently due + Fgedsyycm Tspfx Aplsb Fitted tires: Su

Stanje: skoraj kot novo (rabljeno), Elekroenergetska prenosna omara, elektrodistribucijska omara, elektro omara 600 kW, AEG tiristor, AEG Thyro-A, 2A 400-495 HFRL1, tiristorski pretvornik, regulator moči, elektroenergetska prenosna omara za peč, rabljeni stroj Fjdpfx Aey Ezbyjplsgb Proizvajalec: Amarc srl Tip: 120254; 3058 Leto: 2012 Dimenzije: 1800 x 515 x 2130 mm Teža: 400 kg Omara: 400 V; 3-fazna; 50 Hz; 868 A; 600 kW Sistem za prenos in distribucijo električne energije AEG Thyro-A 2A 400-495 HFRL1 (tiristor) AEG Thyro-A: Tiristor 400 V 495 A Hlajena Regulator moči Nadzor obremenitve na analognih izhodih

Stanje: rabljeno, prevoženi kilometri: 8.000 km, moč: 96 kW (130,52 KM), prva registracija: 11/2017, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, VAT deductible: Net selling price: €16,490 Renault Master, one owner First registration: 11/2017 Mileage: 8,000 km Power: 96 kW / 130 hp For inquiries: Further equipment / special features see below: ---- Please, no emails / emails cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without appointment: Mon - Thu: 09:00 - 16:00 Fri: 09:00 - 13:00 Sat: 09:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch If you have questions: Christian Hirsch Please try calling several times as we are often in customer meetings. ---- - Air conditioning - Reversing camera - Hands-free kit (Bluetooth) - Radio / CD / 2x USB / AUX / Bluetooth - 6-speed manual transmission - Rear wing doors (opening angle 270 degrees) - Central locking with remote control - On-board computer - Eco button - Height-adjustable steering wheel - Height-adjustable seat - Front center armrest (left & right) - Passenger airbag deactivatable - ABS with EBD and brake assist - LED cargo area lighting - Package: cargo area protection package – wood paneling on side walls up to the roof – wooden floor in cargo area – lashing eyes in cargo area walls - Side marker lights - Lashing eyes in cargo floor - Lashing eyes, side in cargo area - Overhead storage shelf - UVM. Further equipment see below Additional features: Overhead storage shelf, Driver side airbag, Electrically adjustable and heated exterior mirrors, Outside temperature display, Side marker lights, Brake assist, Tachometer, Electronic brake-force distribution, Body type: high roof panel van, Fuel tank capacity: 105 liters, Bulkhead partition in cargo area, Height-adjustable steering column (steering wheel), Model update, Engine 2.3 L – 96 kW dCi Diesel CAT, EURO 6 Pollen filter, Wheelbase: 4332 mm, Smoker package, Tire repair kit, Low-emission according to Euro 6 standard, Shift indicator, Sliding door on right side load/passenger area, Front mud flaps, Side protection strips, Seat cover/upholstery: fabric, Cab seats: driver seat height-adjustable, Lashing eyes in cargo floor, Heat-insulating glazing, Gross vehicle weight rating: 3.50 t Please, no emails / emails cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without appointment: Mon - Thu: 09:00 - 16:00 Fri: 09:00 - 13:00 Sat: 09:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch Fedexiu Daspfx Aplsgb Please try calling several times as we are often in a customer meeting. ----Further offers at Equipment was queried by VIN; technical issues may cause errors Information provided online is non-binding and for description purposes only. It does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale.

Stanje: rabljeno, prevoženi kilometri: 152.000 km, moč: 105 kW (142,76 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 06/2021, naslednji pregled (TÜV): 06/2027, emisijski razred: Euro 6, barva: bela, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, sistem za imobilizacijo, Special equipment: Storage compartment above the windscreen, passenger airbag, trailer hitch: wiring for trailer socket, DAB tuner (digital radio reception), electric parking brake, 230 A alternator, external noise reduction measures, rear door (opening angle 270 degrees), wooden floor in load compartment, instrument cluster with color display, comfort lighting in passenger/load compartment, fuel tank with misfuel protection, radiator grille frame in vehicle color, dashboard loading package (additional USB ports and 12V socket), cable duct at rear portal, cable duct at side wall, side marker lights, multimedia system MBUX (7" touchscreen), parking package with reversing camera, spare wheel with road tires, spare wheel holder under frame end incl. jack, windscreen wipers with rain sensor, load securing rail system, seatbelt system with warning indicator (passenger side), seats in cab: twin passenger seat, seats in cab: heated driver seat, seats in cab: comfort driver's seat, red fuel filler cap, rear door entry step, wood interior trim in load/passenger compartment: high (up to roof), wood interior trim in load/passenger compartment: loadable wheel-arch covers (wood), lashing rails in load compartment - side wall at belt line, lashing rails in load compartment - side wall at roof frame, reinforced front axle, jack Additional equipment: Third brake light, adaptive brake light, driver airbag, traction control system (ASR), washer fluid level indicator, external temperature display, brake assist, automatic headlight activation, grab handle for sliding door on load compartment partition wall, electronic brake force distribution (EBV), driver assistance system: crosswind assist, 6-speed manual transmission, body/build: standard high-roof van, keyless start, child lock, communications module (LTE) for digital services, fuel tank: main tank 65 liters, full partition wall in load compartment, headlamp range adjustment, truck approval, Mercedes-Benz emergency call system, engine 2.1 L - 105 kW CDI CAT, wheelbase 3,924 mm, low-emission according to Euro 6d-TEMP, sliding door right in load/passenger compartment, seatbelt system with warning indicator (driver side), seat upholstery: fabric, steel wheels 6.5x16, start/stop engine system, AGM battery 92 Ah, service interval indicator Assyst, permitted gross weight 3.50 t Fedpfxsx S Alyo Apljgb

Stanje: rabljeno, prevoženi kilometri: 170.000 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 01/2020, emisijski razred: Euro 6, barva: bela, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, sistem za imobilizacijo, Special Equipment: Fsdpfx Ajyu Ea Rsplegb Hill Start Assist, DAB tuner (digital radio reception), entry handle on rear right C-pillar, driver assistance system: active brake assist, suspension: stabilization level I, radiator grille frame in vehicle color, MBUX multimedia system (7" touchscreen), fog lights with cornering function, smoker package, spare wheel with regular tires, spare wheel carrier under end of frame including jack, cab seats: front passenger double seat, cab seats: comfort suspension seat, driver side, rear door step, fleece battery 92 Ah, jack. Further Equipment: Third brake light, storage compartment above windshield, storage compartment below dashboard on passenger side, adaptive brake light, driver's airbag, traction control (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, cab headliner, automatic driving light activation, entry handle for sliding door at bulkhead, electronic brake force distribution (EBD), driver assistance system: crosswind assist, rear doors (opening angle 180 degrees), body/chassis: high-capacity standard van, keyless start, child safety lock, communications module (LTE) for digital services, fuel tank: main tank 71 liters, full-length load compartment partition, steering wheel (mechanically adjustable steering column), headlight range adjustment, lateral marker lights, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 4325 mm, low emissions according to Euro 6 standard, sliding door for load/passenger compartment on right, seat belt system with warning device (driver's side), seat upholstery: fabric, steel wheels 6.5x16, engine start/stop system, ASSYST maintenance interval indicator, heat-insulating glazing, gross vehicle weight rating 3.50 t

Stanje: rabljeno, prevoženi kilometri: 100 km, moč: 125 kW (169,95 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, prva registracija: 04/2024, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.784 mm, višina nakladalnega prostora: 1.786 mm, emisijski razred: Euro 6, barva: črn, število sedežev: 8, skupna dolžina: 5.981 mm, skupna širina: 2.059 mm, skupna višina: 2.546 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, Internal number: 79223---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Bi-Xenon headlights with static cornering lights, LED daytime running lights including automatic headlight leveling Fgodpfx Aoq Dh Rzeplob * Windows: Fixed side window, 2nd row, right, including sliding door right side * Heated rear window wiper including digital interior mirror with full-screen display * Automatic climate control – air conditioning at front and rear incl. rear water heater * Navigation system – dynamic and cloud-based navigation with traffic information, lane guidance and Western Europe road map – Ford audio system with 12-inch multifunction display and Ford SYNC4 – Bluetooth – hands-free system with voice control – music playback with voice control – integration of storage media (USB, MP3 player) – FordPass Connect incl. Wi-Fi hotspot – emergency call assistant – Ford Power-Up – Android Auto and Apple CarPlay * Seat Package 4A: Driver's seat 4-way adjustable – double passenger seat with storage compartment under individually liftable seat cushions – height-adjustable headrests – tray integrated into double passenger seat (foldable) – seat heating for driver and front passenger (outer seat) – inside armrest for driver – manual lumbar support (driver's seat) – passenger and side airbags and front head-shoulder airbags – seat upholstery: part-leather trim * Auxiliary heater package 1: Auxiliary heater (fuel-powered additional heater), programmable, incl. remote control – incl. cold start package (-29 degrees) * Technology Package 13 (4x4): Heated windscreen – wipers with rain sensor – parking pilot system front and rear – active emergency brake assist (radar-based) – lane assist with drowsiness detection and high beam assist – headlight assistant with day/night sensor – adaptive cruise control – rearview camera – LED downlight – fog lights – exterior mirrors electrically adjustable, foldable, and heated * Conversion: System MobileFlex with 10 locking rails – side windows 3rd seat row left and right ADDITIONAL EQUIPMENT * Front axle load increase – up to 1850 kg * Driver airbag * All-wheel drive * ABS with electronic brakeforce distribution – ESP with traction control – hill start assist – crosswind assist – emergency brake assist – rollover protection – emergency brake support incl. emergency stop signal * Battery run time, programming of battery run time to 10 min * On-board computer with consumption and mileage display (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Split rear doors with 180° opening angle (without window) * Power windows * Ford Easy Fuel – comfort fuel cap and misfueling protection * Alternator * Lockable glove compartment * Interior lighting with delay function and reading lights at the front * Fuel tank 70 l * Load compartment lighting * Steering column, height and reach adjustable * MyKey key system – individually programmable second key * Emergency call assistant * Particulate filter: diesel particulate filter * Wheels: alloy wheels 6.5 J x 16 in 10-spoke design * Wheels: tire repair kit * Headlights: halogen dipped beam with daytime running lights * Sliding door entry light, automatic when door opens * Sliding door right * Mud flaps rear * Side protection strips * Power steering * Seatbelts – seatbelt tensioners and force limiters at the front * Rear bumper with integrated step * Lashing eyes * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking

Stanje: rabljeno, prevoženi kilometri: 29.986 km, moč: 96 kW (130,52 KM), prva registracija: 01/2024, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 1.840 mm, Oprema: centralno zaklepanje, filter saj, klimatska naprava, Errors and prior sale excepted! Internal number: 1283. PC44484 ----EQUIPMENT * Exterior mirrors, electrically adjustable, heated and foldable – with integrated turn signal indicators * Heated windshield * Box body with side entry and rear wing doors * Deep-freeze capability adjustable down to -20°C * Dual rear wheels – increased front axle load capacity to 1,850 kg and roof marker lights * Transmission: 6-speed manual * Anti-lock braking system (ABS) with electronic brake-force distribution (EBD) * Driver airbag * Exterior mirrors, short arm – with integrated turn signals * On-board computer with consumption and mileage display (e.g. remaining range), external temperature display, and Ford ECOMode * Flat roof * Overhead storage compartment at the front * Headlining in driver’s cab * Roof marker lights * Rev counter * Electronic safety and stability system (ESP) with traction control (TSC) – hill start assist – crosswind assist – emergency brake assist – rollover protection – emergency brake support including emergency brake light – additionally with trailer stability control only in conjunction with tow bar (subject to surcharge) * Front electric windows – with quickdown/-up function on driver’s side * Ford Easy Fuel – comfort tank cap and misfuelling prevention * Low-beam headlights: halogen headlights with daytime running lights * Lockable glove compartment with lid * Interior lighting with delay and front reading lamps * Front air conditioning incl. dust and pollen filter * 70 L fuel tank * Radiator grille: 3 bars and surround in black-grey plastic * Paint: solid (Uni) * Steering wheel: faux leather * MyKey System – individually programmable spare key * Fog lights * Emergency assistance system * Package: Technology Package 8 – heated windshield – wipers with rain sensor – active emergency brake assist (camera-based) – lane keeping assist with driver fatigue warning and high beam assistant, additionally with lane departure warning assist – headlight assistant with day/night sensor – cruise control – Ford audio system (DAB+, MyFord Dock, FordPass Connect, speakers, antenna, steering wheel controls, Bluetooth, USB, hands-free kit) * Particulate filter: diesel particulate filter * Power steering * Seatbelts – seatbelt pre-tensioners and force limiters front * Seats: Seat Package 13 – driver’s seat, 4-way adjustable (forwards/backwards, backrest, cushion tilt, height) – double passenger seat with storage compartment under individually folding seat cushions – height-adjustable headrests – integrated fold-out tray in double passenger seat – driver’s armrest inside – manual lumbar support (driver’s seat) – seat upholstery: fabric * Start-Stop system * Air recirculation control * Immobilizer Fgodjywqquspfx Apljb * Heat-insulating, lightly tinted glazing * Central locking with remote control ... and much more. ----Vehicle is in unprepared condition! Nationwide delivery available for an extra charge. Errors and prior sale excepted. We gladly accept your vehicle in trade-in. Financing/leasing possible even without down payment! Do you have any questions? We are happy to advise you!