Folding nakup rabljenega (5.252)

Stanje: rabljeno, Ponudba sestavljena iz: Nova valjčna gubalka - za zgibalnike Stahlfolder/Heidelberg Delovna širina 56 cm – 330 € / kos Delovna širina 66 cm – 365 € / kos Delovna širina 78 cm – 400 € / kos Dodpsxr Adtjfx Agpoup Kroglični ležaji za valjčne gubalkar: Delovna širina 40–94 cm – 28 € / kos Po želji lahko za vas organiziramo naslednje: Pakiranje, nakladanje, transport (po morju ali letalu) vključno s carinjenjem Pridobitev leasing ponudbe

Stanje: rabljeno, Ponudba sestavljena iz: Nova zgibna valja - za zgibalne stroje MB Bäuerle Delovna širina 38 cm - 360€ / kos Delovna širina 52 cm - 400€ / kos Dedpoxr Adysfx Agpsup Po želji lahko za vas organiziramo naslednje: Pakiranje, nakladanje, prevoz (z ladjo ali letalom) vključno s carinsko obdelavo Pridobitev leasing ponudbe

Stanje: rabljeno, Ponudba sestoji iz: Novi zložljivi valj (žlebasti del 810 mm) Dujdpfx Ajxr Ag Iegpsp - za zložljive stroje MBO Delovna širina 78 cm – 435 € / kos. Na željo lahko za vas uredimo: Pakiranje, nakladanje, transport (po morju ali zraku) vključno s carinsko obravnavo Pridobitev leasing ponudbe

Stanje: rabljeno, Ponudba sestavljena iz: KL 112 zgibalni valj - za zgibalne stroje Herzog + Heymann Delovna širina 35 cm - 325 € / kos. Djdpfx Aexr Ag Uegpeup Na željo vam lahko organiziramo naslednje storitve: Pakiranje, nakladanje, prevoz (z ladjo ali letalom), vključno s carinsko obravnavo.

Stanje: rabljeno, Ponuda se sastoji od: Nova valjci za savijanje - za Stahlfolder/Heidelberg mašine za savijanje Nova valjak za savijanje, ručno kolo: radna širina 36 cm – 415€ / kom. Nova valjak za savijanje: radna širina 36 cm – 320€ / kom. Nova valjak za savijanje, ručno kolo: radna širina 40 cm – 415€ / kom. Nova valjak za savijanje: radna širina 40 cm – 350€ / kom. Nova valjak za savijanje, ručno kolo: radna širina 52 cm – 415€ / kom. Nova valjak za savijanje: radna širina 52 cm – 350€ / kom. Nova valjak za savijanje: radna širina 56 cm – 365€ / kom. Nova valjak za savijanje: radna širina 66 cm – 400€ / kom. Nova valjak za savijanje: radna širina 78 cm – 435€ / kom. Nova valjak za savijanje: radna širina 82 cm – 440€ / kom. Nova valjak za savijanje: radna širina 94 cm – 485€ / kom. Na zahtev možemo organizovati sledeće usluge za Vas: Dusdpfxjxr Ad Ho Agpsp Pakovanje, utovar, transport (brodom ili avionom) uključujući carinsku proceduru Obezbeđivanje ponude za lizing

Stanje: rabljeno, Ponudba sestavljena iz: Nova zgibna valja vklj. kroglična ležišča - za zgibalne stroje Horizon Delovna širina 54-56 cm - 400€/kos Na vašo željo lahko organiziramo naslednje: Duodpfx Aexr Ad Togpep Pakiranje, nakladanje, prevoz (ladijsko ali z letalom), vključno s carinsko obdelavo Pridobitev leasing ponudbe

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Dedpfoyl Rx Tjx Agpjup Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: rabljeno, Offer comprising: KL 112 Folding Roller - for Herzog + Heymann folding machines Working width: 35 cm Upon request, we can arrange the following for you: Djdeu Sr Ipjpfx Agpjup Packaging, loading, transport (by ship or by air), including customs clearance Obtaining a leasing offer

Stanje: rabljeno, Offer consists of: New folding roller (serrated section 810mm) - for MBO folding machines Working width 78 cm Upon request, we can organise the following for you: Duodeu Sr Rqepfx Agpsp Packaging, loading, transport (by sea or air), including customs clearance.

Stanje: rabljeno, Offer consisting of: New folding roller - suitable for Stahlfolder/Heidelberg folding machines New folding roller, handwheel: working width 36 cm New folding roller: working width 36 cm New folding roller, handwheel: working width 40 cm New folding roller: working width 40 cm New folding roller, handwheel: working width 52 cm New folding roller: working width 52 cm Duedpfxsu Stche Agpep New folding roller: working width 56 cm New folding roller: working width 66 cm New folding roller: working width 78 cm New folding roller: working width 82 cm New folding roller: working width 94 cm Upon request, we can organise the following services for you: - Packaging, loading, transport (by sea or air freight) including customs clearance - Obtaining a leasing offer

Stanje: rabljeno, Offer includes: New folding roller - for Stahlfolder/Heidelberg folding machines Duodou Stcbepfx Agpsp Working width: 56 cm Working width: 66 cm Working width: 78 cm Bearings for folding rollers: Working width: 40-94 cm On request, we can organise the following for you: Packaging, loading, transport (by ship or air) including customs clearance Obtaining a leasing offer

Stanje: rabljeno, Offer consists of: New folding roller incl. ball bearings - for Horizon folding machines Djdpju Sr S Uefx Agpoup Working width 56 cm On request, we can organize the following for you: Packaging, loading, transport (by sea or air) including customs clearance Obtaining a leasing quote

Stanje: rabljeno, Offer consisting of: New folding roller - for MB Bäuerle folding machines Working width: 38 cm Working width: 52 cm Upon request, we can arrange the following services for you: Djdpfxju Stc Uj Agpsup Packaging, loading, transport (by ship or by air), including customs clearance.

Stanje: rabljeno, In this offer, you are purchasing a used folding unit "Ricoh Multi Folding Unit FD5020" Item for sale: 1 x Ricoh Multi Folding Unit FD5020 for various Ricoh Pro models Dedporvhz Ujfx Agpoup - Ricoh Pro C7100 Series - Ricoh Pro C9100 Series - Ricoh Pro C7200 Series - Ricoh Pro 8200 Series - Ricoh Pro 8300 Series Condition: This offer concerns a pre-owned device, which may show signs of wear, such as minor scratches or discolorations. The unit has been tested for proper functionality. Packaging and Shipping: You are welcome to inspect the unit during our business hours—please schedule an appointment in advance! Sea-worthy packaging and worldwide shipping are available upon request. For further information, please feel free to contact us directly.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Verfügen Sie über einen speziell überholten Falzapparat mit neuen Walzen und neuen Zahnrädern. Bei Interesse können Sie sich gerne melden. H&H Falzmaschine mit folgenden Spezifikationen: 8 Taschen + 6 Taschen - Gremser Flachstapelanleger (Baujahr: 2012) – mobiler Anleger mit Höhenverstellung, Format 50x70. - Erste Einheit: H&H M7.32 52/8. Arbeitsbreite: 52 cm (Baujahr: 1999) - Zweite Einheit: H&H KL 112 45/6 Dodpfjwcln Esx Agpsup 1. Verlängerte Auslage 2. Schneideeinheit für 2- bis 3-fach Nutzenproduktion (Baujahr: 1999), Arbeitsbreite: 42 cm 3. Auslage-/Stapelgerät SEHR SPEZIELLE FALZMASCHINEN ZU EINEM SEHR ATTRAKTIVEN PREIS

Stanje: rabljeno, številka stroja/vozila: 304004, vrsta vhodnega toka: trifazni, Oprema: kompresor, Stroj za zgibanje s 6 zgibalnimi žepi, največji format: 558x850 mm, najmanjši format: 128x148 mm, največja dolžina zgiba: 450 mm, najmanjša dolžina zgiba: 35 mm (58 mm v prvi žepi), gramatura papirja: 40–250 g/m², zmogljivost: maks. 240 m/min, 50.000 ciklov/h, višina dovajalnega sklada: 740 mm. Stroj je v dobrem delovnem stanju. Dsdpfx Aeyrqmwegpeup

Stanje: novo, Condition: new Delivery time approx. 12 - 14 weeks from order Country of origin: Germany Bending length: 4010 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity aluminium 190 N/mm²: 2 mm Frame clamping arm units: 5 Number of driven bending elements: 5 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 3 kW Length with manual shear: 4550 mm Length with electric shear: 5200 mm Width: 1435 mm Height: 1460 mm Weight: 2900 kg Hydraulic drive Standard control system Attachment rail on the folding beam Double foot switch Retractable sheet metal rack Waterfall groove Safety device in accordance with BG test principles Frames and clamping arms made from high-grade spheroidal graphite cast iron GGG60, ensuring no cracks or breaks in the clamping arms. 3-year warranty on frames and clamping arms. Quality made in Germany. FURTHER MODELS WITH 3 TO 12 M LENGTH AND 1.25 TO 3.00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Manual cutting device Price on request Electric cutting device St/Al 1.25/1.5 mm Price on request Electric cutting device with cutting head "S" St/Al 1.5/2.0 mm Price on request CONTROL UNIT BMS 10 7-inch display, up to 10 bending angles programmable Price on request CONTROL UNIT BMS 100 10-inch screen control Price on request CONTROL UNIT BMS 150 10-inch screen control with electric back gauge TAZ 1000 with 3 adjustable stops, measuring range 22 - 985 mm Price on request CONTROL UNIT BMS MULTI-TOUCH graphic touch screen control with electric back gauge TAZ 1000 with 3 adjustable stops, measuring range 22 - 985 mm Duodjyrhtuspfx Agpop Price on request Additional stop for back gauge TAZ1000 Price on request PC software "BMS Touch" Price on request CONICAL BACK GAUGE TAZK 1000 Separate stop, driven independently of the back gauge, input via the BMS Touch control, measuring range 22 - 985 mm Price on request Manual back gauge, measuring range 70 - 1000 mm Price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price on request Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) Price on request Price ex works Germany. Transport and on-site commissioning on request.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Germany Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity aluminium 190 N/mm²: 2 mm Cutting capacity, electric shear: 1.5–2 mm Stand–clamping arm units: 6 Number of driven bending elements: 6 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 3 kW Length with manual shear: 5550 mm Length with electric shear: 6200 mm Width: 1435 mm Height: 1460 mm Standard control system Attachment rail on the bending beam Double foot switch Resettable sheet support grate Water-folding groove Safety device in accordance with the safety standards of the BG (German Employers’ Liability Insurance Association) Stands and clamping arms made from high-grade spheroidal graphite cast iron GGG60, eliminating the risk of cracks or breaks in the clamping arms. 3-year warranty on stands and clamping arms. Quality made in Germany. Further models available on request. BM series from 3 to 12 metres in length and sheet thickness from 1 to 1.5 mm (steel). OPTIONS: Manual cutter Price on request Electric cutter, steel/aluminium 1.25/1.5 mm Price on request Electric cutter with cutting head "S", steel/aluminium 1.5/2.0 mm Price on request CONTROL SYSTEM BMS 10 7-inch display, up to 10 bending angles programmable Price on request CONTROL SYSTEM BMS 100 10-inch graphical display control Price on request CONTROL SYSTEM BMS 150 10-inch graphical display control with electronic back gauge TAZ 1000 with 4 adjustable fingers, measuring range 22–985 mm Price on request CONTROL SYSTEM BMS MULTI-TOUCH Graphical touch screen control with electronic back gauge TAZ 1000 with 4 adjustable fingers, measuring range 22–985 mm Price on request Additional finger for TAZ 1000 back gauge Price on request PC software “BMS Touch” Price on request CONICAL BACK GAUGE TAZK 1000 Separate gauge finger, independently powered from the back gauge, Dodpeyrhthsfx Agpeup input via BMS Touch control, measuring range 22–985 mm Price on request Manual back gauge, measuring range 70–1000 mm Price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price on request Hydraulic clamping beam adjustment (incl. manual adjustment) Price on request Price ex works Germany. Transport and on-site commissioning upon request.

Stanje: novo, Condition: new Delivery time approx. 12 - 14 weeks from order Country of origin: Germany Bending length: 6200 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity aluminium 190 N/mm²: 2 mm Frame clamping units: 7 Number of driven bending elements: 7 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 4 kW Length with manual shear: 6730 mm Length with electric shear: 7380 mm Duedoyrhtbepfx Agpop Width: 1435 mm Height: 1460 mm Weight: 3800 kg Hydraulic drive Standard control system Attachment rail on bending beam Double foot switch Retractable sheet metal support Waterfolding groove Safety system according to the safety regulations of the BG (German Employer’s Liability Insurance Association) Frames and clamping arms made of high-quality spheroidal graphite cast iron GGG60, eliminating the risk of cracks or fractures in the clamping arms. 3-year warranty on frames and clamping arms. Quality made in Germany. OTHER MODELS AVAILABLE FROM 3 TO 12 M LENGTH AND FROM 1.25 TO 3.00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Manual cutting device Price on request Electric cutting device St/Al 1.25/1.5 mm Price on request Electric cutting device with cutting head "S" St/Al 1.5/2.0 mm Price on request CONTROL SYSTEM BMS 10 7-inch screen, up to 10 bend angles programmable Price on request CONTROL SYSTEM BMS 100 10-inch screen control Price on request CONTROL SYSTEM BMS 150 10-inch screen control with electric backgauge TAZ 1000 with 3 adjustable fingers, measuring range 22 - 985 mm Price on request CONTROL SYSTEM BMS MULTI-TOUCH Graphic touch screen control with electric backgauge TAZ 1000 with 3 adjustable fingers, measuring range 22 - 985 mm Price on request Additional finger for backgauge TAZ1000 Price on request PC software "BMS Touch" Price on request CONICAL BACKGAUGE TAZK 1000 Separate stop finger, independently driven from the backgauge, input via the BMS Touch control, measuring range 22 - 985 mm Price on request Manual backgauge, measuring range 70 - 1000 mm Price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price on request Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) Price on request Price ex works Germany. Transport and commissioning on site upon request.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Germany Bestseller 1 Bending length: 6,200 mm Bending capacity (steel, 400 N/mm²): 1.25 mm Bending capacity (aluminium, 190 N/mm²): 2 mm Number of frame clamping units: 5 Number of driven bending elements: 5 Insertion depth: 1,130 mm Opening width: 180 mm Working height: 915 mm Motor: 3 kW Length with manual shear: 6,730 mm Length with electric shear: 7,380 mm Width: 1,435 mm Height: 1,460 mm Weight: 3,200 kg Hydraulic drive Standard control system Counter rail on the bending beam Dual foot switch Retractable sheet metal support rack Wired groove Safety device in accordance with BG test principles Frames and clamping arms made from premium GGG60 spheroidal graphite cast iron, making cracks or breaks in the clamping arms virtually impossible. Duodpfx Agoyrhr Rspjp 3-year warranty on frames and clamping arms. Top quality — Made in Germany. OTHER MODELS FROM 3 TO 12 M LENGTH AND BENDING CAPACITIES FROM 1.25 TO 3.00 MM AVAILABLE ON REQUEST. OPTIONS: Manual cutting device Price on request Electric cutting device for steel/aluminium 1.25/1.5 mm Price on request Electric cutting device with “S” cutting head for steel/aluminium 1.5/2.0 mm Price on request BMS 10 CONTROL SYSTEM 7-inch screen, up to 10 bending angles programmable Price on request BMS 100 CONTROL SYSTEM 10-inch screen control Price on request BMS 150 CONTROL SYSTEM 10-inch screen control with electric depth stop TAZ 1000 with 3 adjustable fingers, measuring range 22–985 mm Price on request BMS MULTI-TOUCH CONTROL Graphical touchscreen control with electric depth stop TAZ 1000 with 3 adjustable fingers, measuring range 22–985 mm Price on request Additional finger for depth stop TAZ1000 Price on request PC software "BMS Touch" Price on request TAPERED DEPTH STOP TAZK 1000 Separate stop finger, driven independently from the depth stop, input via BMS Touch control, measuring range 22–985 mm Price on request Manual depth stop, measuring range 70–1000 mm Price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price on request Hydraulic clamping beam adjustment (includes manual clamping beam adjustment) Price on request Price ex works Germany. Transport and commissioning on site available on request.

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Germany Bestseller 1 Bending length 4010 mm Bending capacity steel 400 N/mm² 1.25 mm Bending capacity aluminium 190 N/mm² 2 mm Cutting capacity electric shear 1.25 mm Frame clamping arm units 4 Number of driven bending elements 4 Insertion depth 1130 mm Opening width 180 mm Working height 915 mm Motor 2.2 kW Length with manual shear 4550 mm Length with electric shear 5200 mm Width 1435 mm Height 1460 mm Weight 2600 kg Hydraulic drive Standard control Attachment rail on bending beam Dual foot switch Resettable sheet metal rack Waterfold groove Safety device in accordance with the test principles of BG Frames and clamping arms made from high-grade spheroidal graphite cast iron GGG60, so cracks or breaks in the clamping arms are excluded. 3-year warranty on frames and clamping arms. Quality Made in Germany. FURTHER MODELS FROM 3 TO 12 M LENGTH AND FROM 1.25 TO 3.00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Manual cutting device Price on request Electric cutting device St/Al 1.25/1.5 mm Price on request Electric cutting device with cutting head "S" St/Al 1.5/2.0 mm Price on request CONTROL BMS 10 7-inch screen, up to 10 bending angles programmable Price on request CONTROL BMS 100 10-inch screen control Price on request CONTROL BMS 150 10-inch screen control with electric depth stop TAZ 1000 with 3 adjustable fingers, measuring range 22 - 985 mm Price on request CONTROL BMS MULTI-TOUCH graphical touch screen control with electric depth stop TAZ 1000 with 3 adjustable fingers, measuring range 22 - 985 mm Price on request Dujdeyrhqgepfx Agpjp Additional finger for depth stop TAZ1000 Price on request PC software "BMS Touch" Price on request CONICAL DEPTH STOP TAZK 1000 Separate stop finger, driven independently of the depth stop, input via the BMS Touch control, measuring range 22 - 985 mm Price on request Manual depth stop, measuring range 70 - 1000 mm Price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price on request Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) Price on request Price ex works Germany. Transport and commissioning on site on request.

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Germany Bending capacity steel 400 N/mm²: 1.25 mm Bending capacity aluminium 190 N/mm²: 2 mm Cutting capacity electric shear: 1.25 - 1.5 mm Stand/clamping arm units: 5 Number of driven bending elements: 5 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 2.2 kW Length with manual shear: 5550 mm Length with electric shear: 6200 mm Width: 1435 mm Height: 1460 mm Standard control system Mounting rail on bending beam 2-stage foot switch Retractable sheet metal support grate Beading groove Safety device according to BG test principles Stands and clamping arms made of high-quality spheroidal graphite iron GGG60, preventing cracks or fractures in the clamping arms. 3 years warranty on stands and clamping arms. Quality – Made in Germany. Other models available on request. BM series from 3 to 12 meters in length and sheet thickness from 1 to 1.5 mm steel. OPTIONS: Manual cutting device Price upon request Electric cutting device steel/aluminium 1.25/1.5 mm Price upon request Electric cutting device with cutting head "S" steel/aluminium 1.5/2.0 mm Price upon request CONTROL SYSTEM BMS 10 7-inch screen, up to 10 bending angles programmable Price upon request CONTROL SYSTEM BMS 100 10-inch graphical screen control Price upon request CONTROL SYSTEM BMS 150 10-inch graphical screen control with electric back gauge TAZ 1000 with 4 adjustable fingers, measuring range 22 - 985 mm Price upon request CONTROL SYSTEM BMS MULTI-TOUCH Graphical touch screen control with electric back gauge TAZ 1000 with 4 adjustable fingers, measuring range 22 - 985 mm Price upon request Additional finger for back gauge TAZ1000 Price upon request PC software "BMS Touch" Price upon request TAPERED BACK GAUGE TAZK 1000 Separate gauge finger, driven independently of the back gauge, input via BMS Touch control, measuring range 22 - 985 mm Price upon request Manual back gauge, measuring range 70 - 1000 mm Price upon request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment Price upon request Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) Price upon request Duodpfx Ageyrhqaspsp Price ex works Germany. Transport and on-site commissioning available upon request.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,300 Leasing rate: €1,045.17 Bending length: 2,550 mm Sheet thickness (420 N/mm²): 2.5 mm Max. sheet thickness - stainless steel: 1.5 mm Max. sheet thickness - aluminium: 3.5 mm Drive: motorized Length: 3,830 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,050 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swiveling arm - Tabular programming by entering respective axis values - Open or closed folding function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, spring-back, bending corrections and creation of a database for various material types, sheet thicknesses and lengths - Piece counter Dujdpfx Agowiq A Uepep - Password authorization - 128GB HDD, allowing virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool and parameter page Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in the sheet supports Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. Bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain safety system Triple foot pedal OPTIONS: - Segmented gooseneck rails - Pneumatic tool clamping - Segmented lower and bending tools - Servo drive for the bending beam - Manual crowning system - Second foot pedal - Side stop - Rear light curtain safety system - 2D or 3D graphic control - PC software - Special omega geometry for lower and bending tools - Tapered backgauge - Backgauge extension - Vacuum holders

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €63,900 Leasing rate: €1,207.71 Bending length: 4,200 mm Sheet thickness (420 N/mm²): 1.5 mm Max. sheet thickness – stainless steel: 1 mm Max. sheet thickness – aluminium: 2 mm Drive: Motorized Length: 5,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,350 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming via input of the respective axis values - Open or closed hemming function - Multi-radius functions for folding or bending Dujdpowirrqofx Agpjp - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for various material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, providing virtually unlimited storage capacity - Remote maintenance via WLAN - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo motor, 1,000 mm, rectangular configuration, with ball rolls in the sheet metal trays Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending beam Manual crowning system Second foot pedal Side gauge Rear light curtain protection 2D or 3D graphic control PC software Special omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Leto izdelave: 2024, Stanje: novo Letnik izdelave: 2024 Inventarna številka: 8310 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Tajvan Cena: 46.500 € Duedpfx Aowiqvnegpop Leasing obrok: 888,15 € Na zalogi: 1 Dolžina upogibanja: 2035 mm Debelina pločevine (420 N/mm²): 3,5 mm Pogon: hidravlični Maksimalni kot upogiba: 135° Dolžina: 3000 mm Širina: 1100 mm Višina: 1750 mm Teža: 2200 kg NC krmiljenje za prednastavitev kota upogiba Ročni zadnji prislon: 600 mm Hidravlični pogon Navpično gibanje zgornje grede Razdeljena gosja noga 30°, višina 110 mm s hitromenjalnim sistemom Upogibna letev: 30 mm Oprema v skladu s CE predpisi