Engel Victory nakup rabljenega (238)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Engel Insert 80V/80V/100 2F / 2-C Holm-free Machine, Vertical / Excellent Technical Condition Year of Manufacture: 2007 Injection Unit: Screw Diameter: 2 x 25 mm Shot Weight: approx. 49 g Injection Pressure: 1214 bar Dujdpfoy Dqlrex Aplst Dosage Volume: 54 ccm Clamping Unit: Clamping Force: 100 t Tie Bar Distance: 0x0 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Control for hot runners x 12 Infrared safety light curtains Both thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by Engel's authorized service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, vpenjalna sila: 6.500 kN, premer vijaka: 60 mm, skupna masa: 6.500 kg, proizvajalec krmilnikov: ENGEL, This Engel duo 2400/650 electric injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection volume of 890 cm³. The clamping force reaches up to 6,500 kN, with a maximum mould weight of 11,000 kg. Take advantage of this opportunity to purchase the Engel duo 2400/650. Contact us for further information on this machine. Additional Equipment: • Oil tank capacity (injection unit): 500 l • Maximum cooling capacity (32°C water inlet): 29.40 kWcool • Water consumption (32°C): 4.80 m³/h Machine Advantages: Quality Advantages: • The machine is equipped with electric water manifolds (4 E-Flomos with 8 circuits each). • The injection units have accumulators, enabling high injection pressures of up to 2,400 bar with a 60 mm screw. Technical Advantages: • Maximum injection volume: 890 cm³ • Screw torque: 2,000 Nm // maximum screw speed at reduced torque: 275 min⁻¹ • Reduced torque at maximum screw speed: 1,600 Nm • Recovery rate (3-zone screw): 51 g/s // Recovery rate (barrier screw): 67.1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • L/D ratio: 24.0 • Heating zones incl. nozzle: 8 // Heating power: 27.5 kWel • Opening force with pressure pad: 510 kN • Maximum distance between platens: 1,750 mm Additional Information: Dimensions & Weight: • Ejector chute width: 1,100 mm • Clamping unit weight: 20,000 kg • Max. mould weight (moving platen): 7,330 kg • Max. mould weight (fixed platen): 7,330 kg • Max. total mould weight: 11,000 kg Cycle Data (Euromap 6): • Stroke: 700 mm • Dry cycle time: 2.9 s Control System: Monocompute CC300 Key Features: • 21.5" Full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphical symbols for cycle control • Display languages: German, English • Acoustic error signal / signal lamp for error indication Programs & Monitoring: • Power Control: optimizes motor performance during dosing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight and viscosity • IQ Weight Control: automatic adjustment of injection parameters in case of deviations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous production possible when monitoring is deactivated Clamping Unit & Platens: • Reinforced platens (FAP & BAP each +50 mm) • Reduced min./max. mould height and platen distance (-100 mm due to reinforcement) • FAP: smallest possible platen opening, minimized spherical cap • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves as per drawing • Platen ejector – version A (adapted to clamping profile) • Safety interface for ejector Hydraulics & Core Pulls: • Hydraulic core pull: • 1x on moving platen • 2x on fixed platen • 2x on moving platen with proportional valve PQ, volume measurement, pressure/speed adjustment • Interface for core pull intermediate position Dujdpfsy D Npcox Aplst Mould heating and cooling: • Mould heating: 16 circuits, max. 40 kW heating capacity (Euromap 14)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Zapiralna sila: 160 t Delovne ure: 13.227 h Tip: Večkomponentni Pogon: Električni Dedpfxoyyz Dds Apljut

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 70.000 h, vpenjalna sila: 120 kN, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2.175 letvica, skupna masa: 7.300 kg, premer polžastega transporterja: 35 mm, Freight basis: ex works Delivery time: by agreement Payment terms: 100% prior to collection, net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Min. mold height: 300 mm Max. mold height: - Platen dimensions (H x V): 790 x 680 mm Dusdpfjqy Uklox Apljt Centres (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated removal conveyor (opposite operator side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color doser and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heater Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.300 mm, skupna širina: 1.291 mm, skupna dolžina: 4.083 mm, premer vijaka: 2.522 mm, vpenjalna sila: 1.300 kN, tlak vbrizgavanja: 2.400 letvica, skupna masa: 10.600 kg, Vse tehnične podatke najdete v PDF-ju. Stroj je v avtomatskem načinu deloval nekaj manj kot 33.107 ur. Aktualno obvestilo – davčni nasvet in prednost za rabljeni stroj: Od 1. 7. 2025 dalje je mogoče tudi rabljene stroje vključiti v davčno evidenco s posebno amortizacijo v višini 30 % letno. Poleg ugodnejše cene v primerjavi z novim strojem lahko uveljavljate enake amortizacijske zneske kot pri novem stroju. Ključna beseda: Ojačevalec rasti (§ 7 odst. 2 EStG-E) Dujdpfx Asxd H A Replot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 58.001 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, delovna prostornina: 59 cm³, tlak vbrizgavanja: 20 letvica, minimalna višina orodja: 250 mm, izmetalna sila: 25 N, hod izmetalca: 100 mm, skupna masa: 3.900 kg, Oprema: dokumentacija / priročnik, Engel E Max čistilni stroj, letnik 2008, vključno z linearnim robotom GEKU SR 500 ST. Stroj ima skoraj 58.000 ur delovanja v avtomatskem načinu. Stroj prihaja od priznanega proizvajalca iz farmacevtske industrije, zato je bil tako stroj kot rokovanje podvrženo zelo strogemu vzdrževalnemu režimu in sta v odličnem stanju. Dodjt A Ufwjpfx Apljut

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.108 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 25 mm, delovna prostornina: 79 cm³, tlak vbrizgavanja: 2.398 letvica, izmetalna sila: 6.100 N, hod izmetalca: 100 mm, odmični hod: 606 mm, dolžina plošče: 750 mm, širina plošče: 850 mm, skupna masa: 10.600 kg, Oprema: dokumentacija / priročnik, Tehnične podrobnosti Proizvajalec: Engel Duedpst A Ui Aefx Aplot Model: V 330H/80V/130 Combi Cleanroom Leto izdelave: 2006 Obratovalne ure: 33.107 h Polži: 25/22 mm Teža stroja: 10.600 kg Vključena dodatna oprema: Robot GEKU SR 500 ST Zaščitna kletka Vrtljiva miza Stroj je deloval približno 33.107 ur v avtomatskem načinu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 8.000 kN, premer vijaka: 90 mm, skupna širina: 3.000 mm, skupna višina: 2.500 mm, skupna masa: 44.000 kg, največja dolžina izdelka: 8.900 mm, Hydraulic injection moulding machine from 2003. This Engel DUO 5550/800 features a clamping force of approx. 800 tonnes and a screw diameter of about 90 mm. It offers a shot volume of around 2,700 cm³ and a maximum injection pressure of roughly 1,900 bar. If you are looking for a high-quality injection moulding machine, you should consider the Engel DUO 5550/800, which we offer for sale. Please contact us for further details. • Injection volume: ~2,700 cm³ • Max. injection pressure: ~1,900 bar • Plasticising rate: ~77 g/s Dodpfxjy Alwms Apleut • Clamping unit: Two-platen design (no traditional toggle lever), large mould space for easier changeover, uniform distribution of clamping force • Injection unit: Hydraulic, high-performance plasticising; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large components, more compact than conventional tie-bar machines, robust industrial build, easy to automate Additional equipment • Not specified/included in the information provided

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Krmilnik CC100 A03 iz brizgalnega stroja ENGEL na prodajo. Dedpfx Apjy H Hbhsljut

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Engel VIPER 20 (2015) Pomik osi Z – 2360 mm Pomik osi Y – 1500 mm Izmetni hod osi X – 700 mm Doseg osi X od fiksne pritrdilne plošče – 925 mm Dusdpfx Apsxy Rarslot C-os – pnevmatska nihajna os – da Nazivna nosilnost – 25 kg Sila zapiranja IMM – 55–340 ameriških ton

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Top machine from cleanroom production (pharmaceutical industry) - Equipped with 820 mm rotary table - Includes GEKU Robot SR 500 ST (X=600 mm, Y=1400 mm, Z=2500 mm) - Only 33,107 operating hours - Protective enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / virtually as-new optical condition - Fully functional The machine can be viewed under power by arrangement. Technical Data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Weight: 10,600 kg Functionality: fully functional Condition: excellent Special Features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor capacity: tba Heating capacity: tba Total power: tba The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Protective enclosure / safety cage CC 200 control (German/English) GEKU Robot Details Dujdpfx Apjub Umqelst SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm (vertical) Z-axis: 2500 mm (horizontal) A-flip axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available Warranty Warranty until first startup Loading/Shipping Free loading on buyer's truck or free delivery to destination against freight reimbursement from our stock in Hanover, Germany Financing – On request – Hire purchase option Price on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 69.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 163769, Here we offer a well-maintained injection moulding machine for sale. We are also happy to accept well-maintained machines from year of manufacture 2005 onwards as trade-ins. Please offer us your surplus machines. Manufacturer: Engel Model: Victory 200/80 Tech Year of manufacture: 2006 Control system: CC 200 Machine number: 163769 Operating hours: approx. 69,000 Extras: - Installed languages: German, English - 25 mm (wear- and corrosion-protected) - CC200 control system - Enlarged mounting plates (B-plates) - Minimum installation height: 250 mm - Maximum platen distance: 700 mm - Quality diverter / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - Handling interface Euromap 12 - Host computer interface Engel EMS - Without material hopper or conveyor unit (Screw cylinder replaced, pump replaced, processed materials: PE and PP) Djdpfem Nclvjx Apleut Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: tie-barless Mounting platens: 730 x 600 mm (H x W) Platen distance: 700 mm max Mould installation height: 250 mm min. Opening stroke: 450 mm Injection unit: Screw diameter: 25 mm Shot volume: 69 cm³ Injection pressure: 2090 bar / up to 2400 (boost) Weight: 5,200 kg Dimensions (LxWxH): 4.00 m x 1.40 m x 2.00 m Available from our warehouse in Hanover / Germany, free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight charges Inspection under power possible. If the machine is commissioned by a manufacturer’s certified technician, the customer receives a full warranty until successful commissioning. Beyond commissioning, no further warranty or guarantee is provided. Age- and usage-related wear is accepted. The costs for commissioning by the manufacturer’s technician or a subsequent certified electrician are to be borne by the customer. For your information about the machines we offer and our company: - We only sell our own machines, purchased directly from ongoing production, from our warehouse in Hanover - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets – we are NOT a broker dealing with third-party property - All machines come from successful companies where maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 58.000 h, Funkcionalnost: popolnoma funkcionalen, Superbly maintained injection moulding machine from a cleanroom (pharmaceutical production) - Fully operational with functionality guarantee - Equipped with GEKU SR 500 ST linear robot - Excellent cosmetic condition Technical Specifications Manufacturer: Engel Model: e-max 200/100 Serial Number: 170609 Year of Manufacture: 2008 Operating Hours: approx. 58,774 h Dimensions (L/W/H): 4.0 x 1.3 x 1.9 m Weight: 3,900 kg Functionality: fully operational Condition: excellent cleanroom Special Features Control system: CC200 Screw diameter: 25 mm Shot weight: 55 g/PS Injection pressure: 2,400 bar Injection volume: 59 cc Clamping force: 1,000 kN / 100 t Tie bar spacing: 460 x 410 mm Platen size: 650 x 600 mm Mould height: 150-450 mm Max. platen distance: 800 mm Opening stroke: 350 mm Ejector stroke / force: 100 mm / 25 kN Clamping unit: electric Duodpoubamvofx Aplot Connected load: 45 kW Rated current: 69 A The machine is available immediately at our warehouse in Hannover, Germany, and has been tested. Extras GEKU Robot Type: SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1,400 mm (vertical) Z-axis: 2,500 mm (horizontal) A flip axis: SWM 45 C-axis: Servo Gripper: SWS16 B-axis: not present Warranty Warranty valid until first commissioning. Loading/Shipping FCA – Free loading onto buyer’s truck or delivered free to destination against freight reimbursement from our warehouse in Hannover, Germany Financing On request – hire purchase option Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Duedpfxsyc Ewxj Aplst Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 11.337 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 234917, vpenjalna sila: 1.600 kN, premer vijaka: 30 mm, Oprema: dokumentacija / priročnik, Stroj izhaja iz proizvodnje v čisti sobi in je bil izključno obratovan z PP-materialom. Polž je zato v zelo dobrem in vzdrževanem stanju. TEHNIČNI PODATKI Djdpoy A Exdefx Aplsut Zapiralna sila: 1.600 kN Premer polža: 30 mm PODATKI O STROJU Teža: 8.400 kg Obratovalne ure: 11.337 h OPREMA Dokumentacija/Uporabniški priročnik Obsežna posebna oprema

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Engel ES 330/80 HL .ST Schließkraft 80 Tonnen Dodpfxevcrqns Apleut Baujahr 1998 Schnecke 35 mm Schussgewicht 140 g

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Stroj trenutno ne deluje, krmilna omara je nepopolna! Dedpfeyrdzuox Apljut

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, PET preform injection moulding machine, clamping force 320 t, shot weight 6,935 g. Screw diameter 130 mm. Preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-cavity, 4-stage, including removal kit and conveyor belt, capacity approx. 1,825 LT/h. Performance: approx. 17,000 preforms/hour. Option 1: MHT 72-cavity mould for 30.8 g PCO 1810 or 1881 (shorty, 28 mm neck ring, for 1.5 litre bottles) Option 2: 72 core sets for 27.8 g PCO 1810 or 1881 (shorty, 28 mm neck ring, for 1.0 litre bottles) The system comes from our own preform production and was in operation until being replaced by our new machine. Duedsnxkxwspfx Apljt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Tehnični podatki Približne dimenzije na lokaciji (D × Š × V): 8.300 × 2.500 × 2.330 mm Teža (pribl.): 33.000 kg Serijska številka: 161394 Opis artikla Zapiralna enota Zapiralna sila: 6500 kN Razdalja med stebri: 1025 × 930 mm Min./maks. višina orodja: 450 / 950 mm Maksimalna odprtina: 1800 mm Brizgalna enota Premer polža: 90 mm Volumen brizga: 2480 cm³ Duedjyu Niiepfx Apljt Teža brizga: 2254 g Elektro-hidravlična oprema Nazivna moč črpalnega motorja: 55 kW Moč gretja: 62 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Tehnični podatki Približne dimenzije na lokaciji (D × Š × V): 8.000 × 2.250 × 2.200 mm Teža (pribl.): 5.600 kg Opis artikla Serijska številka: 42503 Sklepna enota Sila zapiranja: 4.000 kN Dimenzije pritrdilnih plošč: 1.300 × 1.080 mm Min./maks. višina orodja: najmanj 350 mm Največja odprtina: 1.300 mm Vbrizgalna enota Premer polža: 70 mm Prostornina vbrizga: 1.155 cm³ Teža vbrizga: 1.040 g Djdoyu Nc Aspfx Aplout Tlak vbrizga: 1.481 bar Elektro-hidravlična oprema Nazivna moč motorja črpalke: 45 kW

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref.-Nr.: 18597 Proizvajalec: ENGEL Tip: insert 200 H/70 CC 200 Leto izdelave: 2007 Zapiralna enota Zapiralna sila: 70 ton Odpiralna pot: 305 mm Brizgalna enota Premer polža: 25 mm Dedpfx Ajy Au I Uoplout Volumen brizga: 69 cm³ Teža brizga PS: 62 g Tlak brizganja: 2381 bar Dimenzije in teža Dimenzije DxŠxV: 4,0 x 1,8 x 2,5 m Teža stroja: 5600 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, vpenjalna sila: 1.100 kN, premer vijaka: 150 mm, skupna širina: 1.400 mm, skupna višina: 1.150 mm, skupna masa: 77.000 kg, Hidravlični stroj za brizganje iz leta 1999. Ta Engel ES 16050/1100 DUO ima zapiralno silo 1100 t in premer polža 150 mm. Odpiralni hod znaša 1800 mm, skupna teža pa je 77.000 kg. Če iščete visokokakovostni stroj za brizganje plastike, razmislite o modelu Engel ES 16050/1100 DUO, ki ga imamo na voljo za prodajo. Za dodatne informacije nas kontaktirajte. • Obratovalne ure: 86.200 h • Premer stebra: 230 mm • Volumen brizganja: 10.955 cm³ Duedpfx Apeyuc Urolot • Tlak vbrizga: 1330 bar • Izmetalna sila: 215 N • Odpiralni hod: 1800 mm • Moč gretja: 113 kW (153,64 KM)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engelsuo11050/1300 (2017) Dedpjyaat Ajfx Apljut

Stanje: dober (rabljeno), Leto izdelave: 2009, Zapiralna sila: 100 t Premer vijaka: 40 mm Tip: Horizontalen Dsdpfx Apjyktp Ssljut Pogon: Hidravlični

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Machine: ENGEL DUO 5550/650 pico Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie-bars (H × V): 1,100 × 960 mm Duodpfx Ajyw Aa Uoplst Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum daylight: 2,050 mm Max mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie-bar diameter: 175 mm 2. Injection Unit (5550 aggregate) Screw diameter: 90 mm (reinforced for up to 30% fibre content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Max. screw rotation speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 pcs. (installed on the fixed platen) 5. General Characteristics Dual-platen machine (DUO series) designed for the production of large-size plastic components. The design ensures: - High rigidity of the clamping system - Capability to operate with heavy moulds and large opening strokes Additional information: - Screw reinforced for up to 30% fibre content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production - Machine available immediately, professionally maintained and ready for immediate operation.