CR-USP 5

ENGEL

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljeni stroj za brizganje plastike Proizvajalec: ENGEL Tip: VICTORY 330/110 TECH Leto izdelave: 2012 Zapiralna sila: 110 ton Razmak med stebri: brez stebrov Premer polža: 30 mm Bsdpjx Ddd Ssfx Abhscu Maks. brizgalni volumen: 113 cm³ Teža brizganca: 102 g/KS Krmiljenje: CC200 Oprema: - 1 x izvlek jedra - izpihovalni ventil - zaščitna ograja - transportni trak

Leto izdelave: 2022, Stanje: novo, For sale is an NS 2 conveyor belt from Mass International. Bcedpfx Abof E E Iqohsu The belt can be purchased either with or without a separating roller. The separating roller is available at an additional price of €332. Feed width: 600 mm Cleated belt length: 1300 mm Overall width: 405 mm Nominal width: 350 mm Belt speed constant: 3 m/min

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljena brizgalna stiskalnica Proizvajalec: ENGEL Tip: VICTORY 330/110 TECH Leto izdelave: 2011 Zapiralna sila: 110 ton Razdalja med stebri: brez stebrov Premer polža: 35 mm Bcedpfxox Ddgms Abheu Maks. brizgalni volumen: 151 cm³ Teža brizganca: 136 g/PS Krmiljenje: CC200 Oprema: - 1 x izmet jedra - Ventil za izpihavanje - Zaščitna ograja - Transportni trak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 3.871 h, vpenjalna sila: 7.000 kN, premer vijaka: 40 mm, skupna višina: 2.500 mm, skupna masa: 20.000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. It is a robust hydraulic injection molding machine featuring a system size of 8.5 m x 2.5 m x 2.5 m and an overall weight of approximately 20,000 kg. The machine is equipped with two 3-zone screws and 32 hot runner control circuits. Consider the opportunity to purchase this Engel E-Duo 740H-740L-700 combi. Contact us for further information. • 2 x 3-zone screws d50 / 32 hot runner control circuits • Maximum mold weight (total): 11,000 kg / max. mold weight per platen: 7,300 kg / max. distance of mold center of gravity from clamping surfaces: 315 mm • Opening force (with cushion): 510 kN • Opening force: 130 kN • Platen dimensions (H × V): 1510 × 1440 mm • Tie bar spacing (H × V): 1100 × 960 mm • Tie bar diameter: 175 mm • Max. mold weight: 11,000 kg Bcjdpfx Abjx D E Dtjhou • Injection unit 1 • Injection volume: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating power: 16 kW • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection unit 2 • Injection volume: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2400 bar • Nozzle stroke: 600 mm • Heating power: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine depth: 8,500 mm

Leto izdelave: 2022, Stanje: novo, Additional cost for corrugated edge: €374 *Corrugated edge is considered an optional feature!* - Mobile on steerable castors - Angle adjustable - Includes 3 collection trays - Infeed length: 600 mm - Conveyor belt length: 1800 mm - Belt speed: 3 m/min - Cleat height: 30 mm - Spring-assisted height adjustment Bedjf U Evgjpfx Abhocu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No Bcodjyf H Nnepfx Abheu • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm Bcodpfx Ajyf Htyjbhju • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 40 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S/N:01130421-2.24, vrsta vhodnega toka: trifazni, skupna višina: 1.150 mm, skupna širina: 1.200 mm, skupna dolžina: 1.030 mm, vhodna napetost: 400 V, skupna masa: 610 kg, dolžina podajanja os X: 340 mm, dolžina pomika po osi Y: 320 mm, dolžina podajanja os Z: 420 mm, vrsta hlajenja: voda, vhodni tok: 16 A, vrsta zaščite (IP koda): IP20, laserska moč: 600 W, vhodna frekvenca: 100 Hz, valovna dolžina laserja: 1.070 nm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Offered is an almost new laser welding unit from Alpha Laser including accessories (water chiller, welding fume extractor, lifting table, and more). Average power: 600 W - pulse peak power CW: 9 kW The ALFlak systems include (standard equipment): - Laser with processing head and Leica observation optics - UV glare protection - Multifunction foot switch - Illumination - WIN Laser software “BKS” - joystick Laser: pulse and CW mode, pilot laser Motorized motion system Machine axes: 3 or 4 Travel range (X, Y, Z): approx. 320 x 330 x 370 mm Arm deflection/working distance: approx. 1400 mm Bjdpfsvu Tdgjx Abhocu Including standard beam deflection unit (600-0365A) Including 12.1" touchscreen (new version, 300-1171C) with door release on display holder Including magnetic beam protection plate (701-0687A) If you are interested, I am happy to provide a detailed quotation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Engel duo 1800/500 eco drive Zapiralna sila: 500 t Premer polža: 70 mm Volumen vbrizga: 1139 cm3 Vbrizgalni tlak: 1735 bar Razdalja med stebri V: 830 mm Razdalja med stebri H: 910 mm Tip: Horizontalen Pogon: Hidravlični CC300 krmiljenje Število ur: 38.000 Euromap 67 2 izvleka jedra Ecodrive 2 črpalki Hitro-vpenjalni sistem Bsdpfx Asw Hbylsbhocu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g Bcodpeyfrb Nsfx Abhou • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Leto izdelave: 2022, Stanje: novo, - Task length: 600 mm - Conveyor belt length: 1800 mm - Usable width: 450 mm / Overall width: 505 mm - Mobile on steerable locking castors Bcjdpfx Abolkdbyshsu - Angle adjustable - Incl. 3 collection trays - Belt speed: 3 m/min - Cleat height: 30 mm - Spring-assisted height adjustment

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Zapiralna sila: 650 t Premer vijaka: 90 mm Razdalja med stebri V: 960 mm Razdalja med stebri H: 1100 mm Prostornina brizga: 2740 cm3 Tip: Horizontalen Pogon: Hidravlični VIPER 40 linearni robot na voljo Bcedpeyfh I Esfx Abheu Stroj ima približno 61.600 obratovalnih ur. 6 menjalnikov jeder na gibljivi plošči, 2 jedri in 4 kaskadni ventili na fiksni plošči.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Bcedpfx Absxvingehou Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Weight 52 kg Bedpfx Abeu A Ticohjcu Picker from IMM Engel Victory 80/50 Spex

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 73.437 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna višina: 2.095 mm, skupna masa: 8.700 kg, največja dolžina izdelka: 5.155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design that increases flexibility and accessibility for various mold sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. The machine is equipped with a robot, ensuring efficient automation. If you are looking for a high-quality injection moulding machine, you should consider the Engel VICTORY 650/160 tech we have for sale. Please contact us for further details on this machine. • Operating hours: 73,437 h • Condition: Excellent • Operational status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar spacing: Tie-bar-less • Motor power: 22 kW • Heating power: 13.35 kW • Number of electrical connector pins: 16 • Injection nozzle radius (tip): R35 • Centring ring diameter: 125 mm • Number of core pulls: 0 • Number of heating zones: 0 Bcsdpfx Abjx Nr Hushsu Additional Equipment • Robot included: Yes • Robot interface: Euromap 67