Stroj za brizganje

ENGEL Victory 750 H/ 330L/260 Combi – 2010

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Vpenjalna sila: 260 t Premer polža: 50 mm Gedpfsy Eytzjx Anfebl Tip: Horizontalen Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Gedpfx Ast Eu Azjnfebl

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Gbodsutni Rjpfx Anfsl Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Gbjdpjtrya Refx Anfel Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje Gbjdpfx Anjwa Rhrefsl

Stanje: rabljeno, Dvotirni mostni žerjav 50T DEMAG Gbedpfx Asxfh I Dsnfol Proizvajalec DEMAG Tip Dvotirni mostni žerjav Industrijske uporabe Težka dvigovanja v panogah, kot so jeklarska industrija, ladjedelništvo, težka industrijska delavnica, logistična središča ali pristaniške inštalacije. Glavne tehnične specifikacije - Nosilnost: 50 ton - Razpon: 28 metrov - Konstrukcija: Dvotirna - Proizvajalec dvižnega sistema: DEMAG - Namestitev: montaža na tirnice ali nosilce - Upravljanje: radijsko daljinsko vodenje ali upravljalska kabina, odvisno od instalacije - Uporaba: notranja ali zunanja, glede na izvedbo - Ojačano ogrodje za ekstremne obremenitve 🧩 Uporaba stroja Dvotirni mostni žerjav DEMAG 50T je zasnovan za težka dvigovanja v zelo zahtevnih industrijskih okoljih. Razpon 28 metrov omogoča varno in natančno manipulacijo z velikimi in težkimi tovori ter izboljšuje delovne tokove v proizvodnji, vzdrževanju ali skladiščih. ⚙️ Lastnosti / prednosti Ta model izstopa po izjemni nosilnosti 50 ton, 28-metrskem razponu, ojačani dvotirni konstrukciji ter napredni DEMAG tehnologiji dviganja, ki zagotavlja robustnost, zanesljivost in stabilnost za ekstremno zahtevne aplikacije. Idealna izbira za obrate, ki zahtevajo kontinuirano visoko zmogljivost.

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Gsdpjkucxlefx Anfsbl Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: rabljeno, Leto izdelave: 2002, Overview This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line offers a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical Data Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Gbjdewzvl Sjpfx Anfel Bottle material: PET Filler type: Isobaric filler Year of construction: between 1999 and 2007 (various machines) Closure type: Short-neck Label type: OPP (Contiroll) Scope of Supply 1 x Blowing machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing machine to labeller & filler 1 x Labeller CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and soft drinks | approx. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single lane, 45 packs/min Package transport to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhauled in 2022 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 600 x 400 x 500 mm Distance spindle nose to table: 200–700 mm Maximum workpiece size (L x W x H): 1200 x 800 x 350 mm Maximum workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and EDM (U = 0–100 rpm) Gbedpswh Sigefx Anfsl Pneumatic chuck of choice (Erowa/3R Systems) ISPG Generator, 80 Ampere Best achievable surface finish: Ra 0.08 µm AC FORM HMI operating interface 15” LCD colour display, mouse or touchscreen operation, lift keyboard and manual control unit Including 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5,504 kg Machine dimensions: 1,790 x 2,860 x 3,100 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Options: - Commissioning and operator training - Transport and installation - Chiller unit - Dielectric fluid

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Top machine from cleanroom production (pharmaceutical industry) - Equipped with 820 mm rotary table - Includes GEKU Robot SR 500 ST (X=600 mm, Y=1400 mm, Z=2500 mm) - Only 33,107 operating hours - Protective enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / virtually as-new optical condition - Fully functional The machine can be viewed under power by arrangement. Technical Data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Weight: 10,600 kg Functionality: fully functional Condition: excellent Special Features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor capacity: tba Heating capacity: tba Total power: tba The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Protective enclosure / safety cage CC 200 control (German/English) GEKU Robot Details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm (vertical) Z-axis: 2500 mm (horizontal) Gbjdpfx Ansub Umqofsl A-flip axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available Warranty Warranty until first startup Loading/Shipping Free loading on buyer's truck or free delivery to destination against freight reimbursement from our stock in Hanover, Germany Financing – On request – Hire purchase option Price on request