Stroj za brizganje

KraussMaffei Technologies GmbH KM 650 / 2000 / 2000 GXW G06

Injection Moulding Machines Directly from the Manufacturer!

As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines:
The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining.

TECHNICAL DATA:
KM 650 / 2000 / 2000 GXW G06 (Order 38618339)

CONTROL SYSTEM
• MC 6 with 24" TFT color display featuring multitouch functions

CLAMPING UNIT
• Clamping force kN 6500
• Max. mold opening force kN 455
• Clear width (h x v) mm 1110 x 960
• Mounting platen (h x v) mm 1540 x 1440
• Mold installation height, min. - max. mm 1550 (without center plate)
• Max. opening stroke mm 3200
• Max. mold opening path mm 1650
• Max. mold weight kg 22000

INJECTION UNIT 1 SP2000
• Screw diameter/type mm 60 / Thermoplastic
• Effective L/D ratio 23.3
• Injection pressure bar 2420
• Shot volume cm³ 792
• Shot weight at max. stroke for PS g 720
• Injection speed mm/s 140
• Injection flow cm³/s 396
• Screw drive/rotation speed 1/min 285
• Plasticizing flow g/s 72.2
• Nozzle contact force kN 82

INJECTION UNIT 2 SP2000
• Screw diameter/type mm 70 / Thermoplastic
• Effective L/D ratio 20
• Injection pressure bar 1877
• Shot volume cm³ 1078
• Shot weight at max. stroke for PS g 981
• Injection speed mm/s 140
• Injection flow cm³/s 539
• Screw drive/rotation speed 1/min 285
• Plasticizing flow g/s 98.3
• Nozzle contact force kN 82

ELECTRICAL PARAMETERS
Connected load kW 341
• Power supply V/Hz 400/50 (3 phases with neutral conductor)

WEIGHT AND DIMENSIONS
• Net weight t 43.5
• Length x width x height m 11.89 x 3.22 x 2.77

ADDITIONAL EQUIPMENT
• Wear-resistant plasticizing unit
• BluePower full insulation for plasticizing cylinder
• Open nozzle
• BluePower ServoDrive
• Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP)
• Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP)
• Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP)
• Mold heating: 96-fold (3.5 kW)
• Euromap interface for handling: E18
• Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1
• Adaptive Process Control (APC+)
• Graphic analysis package
• Sliding table with turning unit, servo-driven
• Vertical center plate
• Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate
• ColorForm interface: signal interface for integration of an RPM system
• Electrical interface for HRS Flexflow system
• Electrical interface and hydraulic valves for "1-K dummy operation"
• Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation

The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request.

Gisdjw U N Ixepfx Afqol
We look forward to your inquiry.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.