Electrospindle nakup rabljenega (247)

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Lodewufv Tspfx Adksri

Stanje: rabljeno, Leto izdelave: 2010, 5-axis machining center with nesting table Numerical control with OSAI software Axis travel (X, Y, Z) mm: 4950, 2050, 1000 Working area on X-axis mm: 4250 Working area on Y-axis mm: 1560 Working area on Z-axis mm: 800 FT multifunctional full-area nesting work table no. 1 PRISMA 5-axis electrospindle, 12 kW (16 HP), 900 – 24,000 rpm, rotation directions SX / DX Automatic tool changer with 12 positions, HSK-F 63 type taper * No. 12 tools diameter 80 mm * No. 6 tools diameter 160 mm * Max. tool diameter mm: 250 * Maximum weight per tool: 4 kg * Maximum weight in the magazine: 24 kg Drilling head with 9 spindles arranged as follows: - No. 5 vertical spindles - No. 4 horizontal star spindles * Spindle pitch mm: 32 * Rotation speed rpm: 4000 * Motor power kW: 2.2 Safety and protection system with light barriers and safety fencing Automatic lubrication system Lodpswdvr Rofx Adkjri Air conditioning for the control cabinet No. 2 vacuum pumps, each with 250 m³/h Accessories and tools available separately Overall dimensions mm: 7865 x 4200 x 4000 TECHNICAL DETAILS MUST BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: Lodpougpwnsfx Adkori * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED

Stanje: rabljeno, Leto izdelave: 2023, Numerical control BH 660 with BSolid Working range on the X-axis: 4320 mm Working range on the Y-axis: 1660 mm Working range on the Z-axis: 200 mm No. 2 working zones on the X-axis Bar working table No. 8 adjustable bars for suction cup holders No. 8 pneumatic Bakelite bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal to secure the panel during processing No. 1 5-axis vertical electrospindle with automatic tool change, liquid cooling, HSK63 type taper, 13 kW (17.4 HP) Automatic tool change system with 16 positions, carousel type, along the X-axis at the rear of the machine Automatic tool magazine with 12 places on the side of the machine Drilling head BH24 L with the following spindle configuration: - No. 8 vertical spindles on the X-axis - No. 6 vertical spindles on the Y-axis - No. 6 horizontal spindles on the X-axis - No. 4 horizontal spindles on the Y-axis - No. 1 integrated saw blade for grooving Lrodpfx Aswgc D Esdkoi Chip removal system with motorized conveyor belt Front carpet protection and safety system Automatic lubrication system Air conditioning for cooling and cleaning the machine control unit 250 m³/h vacuum pump TECHNICAL SPECIFICATIONS TO BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Lrsdpow D E A Ejfx Adkji Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, I am selling a through-feed CNC nesting machining center Biesse Excel NBC 712 X1-S, year of manufacture 2008. Very productive and fast. Automatic infeed table. Working area: 3730 x 2200 mm Configuration: Milling head HSK63, 12 kW, 1,000–24,000 rpm, independent Z-axis with liquid cooling, with magazine for 8 HSK63 positions. 16+8+4 drilling heads 1 grooving saw D.150mm, 2 positions X/Y 1 revolving electrospindle with cutting unit Software: BiesseWorks Advanced + Biesse Nest (CD included) Pumps: 3 pcs BUSCH 3x 300/360 m³/h Lrjdpfofwvppjx Adkji Condition: Like new! Fully functional. Automatic central lubrication and extraction hood system. Complete with safety barriers, transport elements, and CE compliance points. CE certificate and full documentation included.

Stanje: novo, Leto izdelave: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes, precisely tailored to the needs of various industries. It is a unique, reliable, and economical solution that optimizes user working conditions. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a maximum speed of 20,000 rpm, it easily handles all production requirements. The machine features a comprehensive configuration: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining tasks can be realized on just 10 m² of floor space. The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Lrodpjxt D R Dsfx Adkei Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis travel: 180° Max. X-axis speed: 55 m/min Max. Y-axis speed: 40 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 3,000°/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, working area: 2700x1250mm Z-axis travel: 160mm rotary C axis electrospindle power: 8.5kW Lodpfx Aewp R Eiodkjri electrospindle speed: 24,000 rpm convenience tool magazine for 8 tools main tool magazine for 10 tools sawing aggregate on X and Y axes vertical drills on X axis – 8 units vertical drills on Y axis – 5 units horizontal drills on X axis – 4 units horizontal drills on Y axis – 4 units HSK 63 tool holders central lubrication pump vacuum raster table edge milling unit on X axis year of manufacture: 2011

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vrtenja: 18.000 obr/min, Emmegi Phantomatic T5 – CNC obdelovalni center za profile (2007) Naprodaj: dobro vzdrževan in popolnoma operativen CNC obdelovalni center za profile Emmegi Phantomatic T5. Stroj je idealen za učinkovito in natančno obdelavo aluminijastih, PVC in lahkih zlitin profilov. Dolga X-os omogoča obdelavo profilov do 7 metrov v enem vpetju, nihalni način pa zagotavlja izjemno produktivnost pri serijski proizvodnji. Tehnične specifikacije Proizvajalec: Emmegi Model: Phantomatic T5 Leto izdelave: 2007 Krmilni sistem: CNC – 3 osi (X/Y/Z) Hodi osi: X-os: 7000 mm Y-os: 300 mm Z-os: 350 mm Moč vretena: 5,5 kW elektrovreteno Hitrost vretena: do 18.000 vrt/min Vpenjalo orodja: ISO 30 Orodni magacini: 2 × (5 + 1) orodnih mest Sposobnost obdelave: petstranska obdelava z glavo za kotno obdelavo Vpenjala: 8 kom, samodejno pozicioniranje Načini delovanja: Obdelava v enem območju Dvoobmočna/nibalna obdelava (pendulum) Maksimalna dolžina profila: 7000 mm Teža stroja: pribl. 3.200 kg Delovni tlak: 6–8 bar Ljdpfx Adjxz R H Uekjri Oprema in lastnosti - Samodejno pozicioniranje vpenjal - Žaganje, vrtanje in rezkanje v enem vpetju - Nihalni način za neprekinjeno proizvodnjo - Dva orodna magacina za obe delovni coni - Primerno za dolge aluminijaste in PVC profile - Možnost programske opreme Camplus (odvisno od stroja) Stanje - Popolnoma funkcionalen in pripravljen za obratovanje - Vse osi tečejo gladko - Orodni magacini v celoti delujoči - Uporabljan pretežno za aluminijaste profile (lažje obremenitve) - Stroj je čist in ravno ohranjen Idealna uporaba - Izdelava aluminijastih oken in vrat - Obdelava lahkih zlitinskih profilov - Obdelava PVC profilov - Serijska in paketna proizvodnja - Industrijska proizvodnja dolgih profilov Prosimo, preverite točnost tehničnih podatkov pri prodajalcu.

Stanje: dober (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 9911832, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 10.600 mm, pomik osi Y: 1.570 mm, pomik po osi Z: 740 mm, skupna višina: 2.760 mm, skupna dolžina: 11.900 mm, skupna širina: 4.500 mm, skupna masa: 10.500 kg, moč vretenovega motorja: 10 W, hitri pomik na osi Z: 40 m/min, hitro pomikanje X-os: 70 m/min, hitri pomik os Y: 60 m/min, nos vretena: HSK F63, premer orodja: 20 mm, dolžina orodja: 150 mm, teža orodja: 3.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, MECAL MC302 GEOS-5 5-AXIS Machining Centre, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made of aluminium alloys and plastics. The machine is equipped with high-quality components and innovative solutions, allowing it to operate either on a single work area or within two separate machining zones, which significantly increases the speed and productivity of the manufacturing process. Simultaneous machining in two work zones is possible thanks to the longitudinal machining area with a movable machining station and chip conveyor. The MECAL aluminium profile machining centre achieves high structural rigidity due to its base, made from high-grade steel tubing. During machining, the profile is held in place by special clamps with an independent power supply system, allowing for quick positioning and automatic adjustment of each individual clamp. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specification of the MECAL MC302 GEOS-5 profile milling machine: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm Lrjdpou Dl R Usfx Adkoi - A axis spindle inclination: ± 120° - C axis spindle rotation: ± 210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 tools - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum saw blade diameter: 500 mm - Maximum side and end mill diameter: 200 mm - Centralized lubrication

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000025340, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.735 mm, pomik osi Y: 1.650 mm, pomik po osi Z: 245.290 mm, višina obdelovanca (maks.): 60 mm, proizvajalec krmilnikov: Biesse BH 660, bSolid, bEdge, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 85 m/min, hitri pomik os Y: 85 m/min, Trumpa aprašymas • Darbinės eigos pagal X ašį: 6735 mm • Darbinės eigos pagal Y ašį: 1650 mm • Darbo stalas: Pod and Rail • Pagrindinio elektros veleno galia: 13,2 kW • Valdomų ašių skaičius: 4 ašys • Maksimalus briaunos aukštis: 60 mm • Gręžimo spindelių bendras skaičius: 20 • Įrankių keitimo vietų skaičius: 16 Išsamus aprašymas • Subkategorija: CNC apdirbimo centrai frezavimui, gręžimui ir briaunavimui • Darbų tipas: briaunavimas, gręžimas, frezavimas • Maksimalus plokštės pravažiavimo aukštis: 60 mm • Darbo laukų skaičius: 2 • Darbo stalas: Pod and Rail Lrjdpfoycvcxex Adkoi • Bėgių skaičius: 10 • Padėties indikatoriai padėklams • Vakuuminės taurelės ruošiniui fiksuoti • Vakuuminių taurelių skaičius: 40 • Spaustuvai ruošiniui fiksuoti • Vakuuminis siurblys • Siurblių skaičius: 1 • Vieno siurblio našumas: 250 m3/h • Gręžimo mazgai: 1 • Pozicija: viršuje • Vertikalaus gręžimo spindelių skaičius: 20 • Horizontalaus gręžimo spindeliai X kryptimi: 4 • Horizontalaus gręžimo spindeliai Y kryptimi: 4 • Frezavimo velenai: 1 • Pozicija: viršuje • Valdomų ašių skaičius: 4 • Automatinis įrankių keitimas • Variklio galia: 13,2 kW • Briaunavimo mazgai: 1 • Klijavimo mazgas • Padėtis: sumontuotas ant pagrindinio mašinos rėmo • Klijų talpa skirtai karštam lydalio klijui • Briaunos ritinio žurnalas • Padėčių skaičius: 4 • Pjovimo/frezavimo mazgai: 2 (viršutiniai) • Pjovimo/frezavimo mazgas: fiksuotas pjovimui/frezavimui X, Y kryptimis • Įrankių žurnalas: 1 • Vieta: 16 • Įrankiai montuojami ant apdirbimo galvos • Dvigubos funkcijos galva – briaunos grandymas ir klijų likučių pašalinimas • Oro srovelės įrenginys briaunų valymui • Valdymo sistema: PC Control • Programinė įranga: Bsolid • Apsauginė konstrukcija su saugos jutikliais • Atliekų drožlių transporterio juosta

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE Lsdpfx Adjv Ig Avokjri - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N1A665853, teža orodja: 30.000 g, vhodna napetost: 400 V, Machining Center Rumba – 4-Axis Machining length: 4000 mm CNC controlled machining center with vertical spindle, suitable for processing extruded aluminum profiles, light metals, PVC, and steel from 3 sides. CNC-controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4 kW electrospindle, 18,000 rpm, inverter-controlled, with rapid tool change (tool changer) and ISO30 spindle. Numeric control for X, Y, Z, and W axes interpolation. Brushless motors for X, Y, Z, and W axis positioning. Includes 4 double pneumatic clamps, software-based tool diameter correction. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified graphics based on Windows system, Teamviewer for remote maintenance, specialized HICAM 2 / CAMPROX software for loading ISO files and running programs). Capable of machining longer parts. Standard equipment: - 4 kW ISO30 electrospindle - 4 pneumatic (manually adjustable) clamps - Safety guard - Automatic tool changer (10 tools) - 4x ISO30 taper sleeves with tool included - 3x chip collection bins - Air nozzle Technical data: - X axis stroke: 3000 mm / 4000 mm - Y axis stroke: 400 mm - Z axis stroke: 300 mm - Rapid traverse (X, Y, Z): 50 m/min - Acceleration (X, Y, Z): 1.5 m/s² Electrospindle: 6.6 kW HSK63 Spindle cooling: Air and liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Weight: 2500 kg Lrodpfx Ajwgm Ibjdkei

Stanje: novo, Leto izdelave: 2023, Avtomatski stružni stroj s pomično glavo K'MX 920 CLEVER je zasnovan za obdelavo kompleksnih obdelovancev do premera Ø 20 mm. Lrjdpfx Aok Dz Diedkei Stružnica je serijsko opremljena z dvema elektrovretenoma, vsakim z največjo hitrostjo 12.000 min⁻¹. S svojimi devetimi osmi, kombinirano enoto (comb) + revolversko glavo na treh oseh ter neodvisno končno enoto, je ta stroj sposoben istočasne uporabe štirih orodij v materialu, kar omogoča optimiziran cikel obdelave. 9 linearnih osi 1 neodvisno regalno mesto z 10 pozicijami Prerez zunanjih orodij 12 x 12 mm Revolverska glava s 12 postajami

Stanje: novo, K’MX EVO mit 7 Achsen wurde für die Bearbeitung von Werkstücken mit einem Durchmesser von Ø 3 bis Ø 32 mm konzipiert. Das Highlight dieser Baureihe sind zwei ölgekühlte Elektospindeln (integrierter Motor) mit einer Leistung von 10,5 kW an der Hauptspindel. Der Hub der Spindel beträgt bis zu 400 mm. Die beiden separaten Werkzeugträger ermöglichen die gleichzeitige Bearbeitung, z. B. Schruppen und Schlichten. Lredpfjunr H Aex Adkji Optional sind beide Linearschlitten mit angetriebenen Werkzeugen ausgestattet, sodass simultanes Bohren und Fräsen durchgeführt werden kann. Diese zwei Werkzeugträger werden durch einen Endbearbeitungsaufsatz für innere Bearbeitungsvorgänge ergänzt, mit der Möglichkeit, auf Haupt- und Gegenspindel gleichzeitig zu drehen. Optional ist auch Fräsen durch angetriebene Werkzeuge möglich. Der großzügige Arbeitsraum ermöglicht eine optimale Spanabfuhr und maximale Zugänglichkeit. - Hohe Steifigkeit - Großzügiger Arbeitsraum - Bis zu 4 Werkzeuge gleichzeitig im Eingriff - 2 unabhängige Werkzeugträger mit je 5 Positionen

Stanje: novo, K’MX EVO mit 7 Achsen wurde für die Bearbeitung von Werkstücken mit einem Durchmesser von Ø 3 bis Ø 32 mm konzipiert. Das Highlight dieser Baureihe sind zwei ölgekühlte Elektospindeln (integrierter Motor) mit einer Leistung von 10,5 kW an der Hauptspindel. Der Hub der Spindel beträgt bis zu 400 mm. Die beiden separaten Werkzeugträger ermöglichen die gleichzeitige Bearbeitung, z. B. Schruppen und Schlichten. Lrjdpfx Adeuq A D Rskoi Optional sind beide Linearschlitten mit angetriebenen Werkzeugen ausgestattet, sodass simultanes Bohren und Fräsen durchgeführt werden kann. Diese zwei Werkzeugträger werden durch einen Endbearbeitungsaufsatz für innere Bearbeitungsvorgänge ergänzt, mit der Möglichkeit, auf Haupt- und Gegenspindel gleichzeitig zu drehen. Optional ist auch Fräsen durch angetriebene Werkzeuge möglich. Der großzügige Arbeitsraum ermöglicht eine optimale Spanabfuhr und maximale Zugänglichkeit. - Hohe Steifigkeit - Großzügiger Arbeitsraum - Bis zu 4 Werkzeuge gleichzeitig im Eingriff - 2 unabhängige Werkzeugträger mit je 5 Positionen

Stanje: novo, MANURHIN K'MX 520 je zasnovan za produktivno obdelavo obdelovancev iz palic s premerom do največ 20 mm. Stroj je standardno opremljen z dvema elektrovretenoma z maksimalno hitrostjo 12.000 vrt/min ter rotirajočo vodilno pušo, sinhronizirano z glavnim vretenom preko jermenice in jermenov. Upravljanje poteka prek petih CNC linearnih osi (X1, Y1, Z1, X2, Z2) in dveh rotacijskih osi (C1, C2). Glavne značilnosti: - Največji premer palice: 20 mm - 12.000 vrt/min na obeh vretenih - 8.400 vrt/min pogonjenih orodij - Moč glavnega vretena: 3,7/5,5 kW Lredpeuqirbofx Adkei - Pomik glave: 210 mm - Število orodij hkrati v rezu: 2

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 Lrjdpfx Asv Rgy Hsdksi - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 Lodpow Huhcjfx Adkeri * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger - Fire Extinguishing System - Posing

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 Lredpsv Rgyysfx Adkji - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120

Stanje: dober (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 1000028154, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj je bil zagnan leta 2019, en lastnik. Uporabljan je bil zelo malo časa. Lsdpjxdl H Uefx Adksri Opis Uporabno delovno območje, konfiguracija 5 osi: X=3280mm, Y=1600mm Hodi osi: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Hitrost pomika osi: X=80 m/min, Y=60 m/min, Z=30 m/min Elektrovreteno: HSD 5-osna 11 kW z neprekinjenim vrtenjem za 360° na oseh B in C, omogoča zelo natančno obdelavo kompleksnih oblik hlajeno s tekočino Vrtalna glava: HSD 20 navpičnih vreten 4 vodoravna rezalni diski na osi X rezalni diski na osi Y Delovna miza: 6 prečk Isbjwhypnjni Itxtobb 4 priseski na vsaki prečki priprava za uniclamp Zaloge orodij: revolverski zalogovnik s 16 pozicijami Vakuumski sistem: Vakuumska črpalka s kapaciteto 250 m³/h, ki zagotavlja trdno pritrditev obdelovancev med obdelovanjem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8P31129J5, potovalna razdalja osi X: 1.140 mm, pomik osi Y: 610 mm, pomik po osi Z: 810 mm, proizvajalec krmilnikov: Mitsubishi, model krmilnika: M720VS, moč vretenovega motorja: 15.000 W, Oprema: dokumentacija / priročnik, klimatska naprava, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical 5-axis (4+1) Machining Centre Pinnacle BX300 with tilting head, year of manufacture November 2012, first installation January 2013. Low number of operating hours. Condition very good. The body is made of high-quality Meehanite cast iron, stress-relieved and hardened to over HB190 to ensure deformation-free performance for many years. • Spindle taper: ISO40 • Electrospindle: 15,000 rpm • Table size (mm): 1300 x 610 • Travel ranges (X mm): 1140 • Travel ranges (Y mm): 610 • Travel ranges (Z mm): 810 • Max. table load (kg): 850 • Distance from spindle nose to table surface (vertical) (mm): 100 ~ 910 • Distance from spindle center to table surface (horizontal) (mm): 355 ~ 1165 • MITSUBISHI M720VS CNC control • Head tilt – B axis: -120° to +120° • C axis rotation: full 360° (optionally, the rotary table can be reconfigured as A axis with hydraulic counter support for blade milling) Additional equipment for Pinnacle BX300 Vertical Machining Centre: • Air blast through spindle • Rotary table with hydraulic counter-support – full 360° rotation • Heidenhain linear scales on X, Y, Z axes and rotary encoders on A and C axes • Through spindle coolant 20 bar + low pressure cooling system • RENISHAW OMP60 workpiece touch probe + receiver • RENISHAW TS27R tool length measuring probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full work area enclosure with safety interlock • Central lubrication system with oil chiller • Work area illumination • Signal tower • Rinsing and air gun • MPG handwheel • Electrical cabinet cooling – air conditioner • 24-position drum-type tool magazine • Spindle and ballscrew temperature control system • Oil-coolant separator Lsdsw D Rwbepfx Adkjri • Maintenance tool kit • Operation manual in Polish and English and CE declaration of conformity The Mitsubishi M720 SSS control (nano control) function optimizes the machined shape estimated from the command path in order to achieve smooth and even machined surfaces, even for highly stepped surfaces.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 574 h, Funkcionalnost: popolnoma funkcionalen, comprising: additional vacuum tank for workpiece clamping, complete with vacuum distributor and automatic cycle control logic KW6.6 / 9 HP (S6) electrospindle Teleservice system Remote cable control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Lrjdpfx Adjw H R A Nskoi Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatic retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity control kit incl. FILTRAGLASS ECO-BOX CNC coolant water treatment system incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter unit approx. 800 x 600 x 1,780 mm electrical connection 230 V / 1.5 kW, compressed air connection on site 7-8 bar (480 Nl/min) Dismantling/removal must be carried out by the buyer

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, SPEZIFIKATION "Benutzerfreundliche" Software-Oberfläche Entspricht allen Anforderungen von Industrie 4.0. Ausgestattet mit einer intuitiven, iconbasierten Benutzeroberfläche, schrittweiser Dateneingabe und Simulationsprogramm. Schnelle Programmauswahl und -ausführung, Aufgabenlisten sowie eine breite Palette an Makros. Parametrische Programmierung und PC-Lizenz „Office Creator“ inklusive. Optional direkter Import gängiger 3D-CAD-Dateiformate: *.stp, *.iges, *.obj, *.skp sowie 2D-Formate: *.dxf, *.dwg. Der Import kompletter Korpus-Projekte ist ebenfalls per einfacher Decodierungssoftware (optional) möglich. Kostenlose Softwareupdates gewährleisten dauerhaft maximale Leistungsfähigkeit! Lodpfxown Hmae Adkori Multifunktionalität Maximale Arbeitsbreite: 1.000 mm (mit jedem Aggregat voll über die gesamte Plattenfläche nutzbar). Maximales Plattengewicht: 70 kg, auch für schwere Küchenarbeitsplatten und individuelle Werkstücke geeignet. Arbeitszyklus: Durchlauf oder Rücklauf zum Bediener. Schnellwechsel/Einrichtung Alle Bearbeitungsschritte in einem Zyklus. Die horizontale Bauweise erleichtert dem Bediener das Beladen der Werkstücke. Schnelle Programmabarbeitung mittels Barcodescanner. Höchste Präzision Groß dimensionierte, stabile Arbeitstische sorgen für maximale Werkstückstabilität, während der Laser-Panelsensor höchste Bohrgenauigkeit garantiert. Qualität Robuste, elektrolytisch verschweißte Stahlkonstruktion, ausgelegt für den anspruchsvollen Dauereinsatz. Groß dimensionierte pneumatische Spannvorrichtung für Platten bis 70 kg, in Verbindung mit doppelten Niederhaltern. Hochpräzise Mechanik, 1 kW bürstenlose Motoren und Rollenführungen. TECHNISCHE DATEN • Tragkraft bis zu 70 kg, ermöglicht das Bearbeiten großer und schwerer Platten wie z. B. Küchenarbeitsplatten • 11 vertikale Spindeln; 6 horizontale Spindeln (vorne/hinten, links/rechts) und Nutfrässäge • Elektromotorspindel 3,3 kW, 3.000–24.000 U/min, Rechts-/Linkslauf • ER25 DIN 6499 Spannzange, max. Ø 35 mm • Werkzeugdimension: Ø 8–16 mm, max. Breite 98 mm • Lasergesteuerte Referenzierung zur automatischen Längenkorrektur • Automatische Luftdüsen zur effektiven Reinigung der Bohrkopf-Einheit • Luftkissentische vorne und hinten (940 × 550 mm) • Automatische Schmierung auf den Y- und Z-Achsen • Arbeitsbereich: o X: min. 300 mm o Y: 75–1.000 mm o Z: 8–60 mm • Industrie-PC: 160 GB Festplatte, 2 GB RAM, 17" Farbdisplay mit Tastatur und Maus • Gewicht: ca. 1.450 kg • Achsvorschubgeschwindigkeit: o X – 42 m/min o Y – 42 m/min o Z – 10 m/min • Anschlussleistung: 6,5 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, številka stroja/vozila: AA100001570, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 180 mm, dolžina mize: 5.510 mm, širina mize: 1.620 mm, hitro pomikanje X-os: 56 m/min, hitri pomik os Y: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel: 180 mm Maximum vector rapid traverse speed X/Y axis: 56 m/min Spindle rotation speed: 4,000 rpm Tool changer positions: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (LxWxH): 9,700 x 5,020 x 2,650 mm Net weight: 5,000 kg Spindle drive power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower at the electrospindle XY-axis safety guards Vacuum pump 150/300 m³/h 5-axis unit 'JQX' version 13.5 kW Fixed base: 145 x 145 H=75 mm Rotatable console: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including plug&play gateway kit) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for the Human-Machine Interface (HMI) Ljdpfjxmgr Rex Adksri Maestro software for CNC programming Hardware key for Maestro CNC Extended Maestro 3D module Additional key for Maestro CNC (USB port) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO