Dvojni Tisk nakup rabljenega (7.287)

Stanje: rabljeno, Pressure: 100 t Distance between uprights: 310 mm Stroke rate: 80 strokes/min Ram adjustment: 40 mm Table surface: 400x300 mm Ram surface: 250x190 mm Table height: 960 mm Ram bore diameter: 35 mm Machine weight approx.: 1.5 t Space requirement approx. (WxDxH): 1500x1500x2200 mm Dkedelp U Sdopfx Ak Est Central oil lubrication Press force monitoring Mechanical feed Machine number: 1111

Stanje: zelo dobro (rabljeno), Leto izdelave: 1973, Description to follow! Dkjdpfozxh S Njx Ak Eot

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Dsdpfx Akot Hw Amo Eskt Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Djdpfxjt Hwwdo Ak Eokt Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 1971, Tlak 100 t Razdalja med stebri 400 mm Hod 20 - 140 mm Vpenjalna površina mize 900 x 710 mm Površina bata 560 x 450 mm Dodpfxoxuv Hte Ak Eokt Nastavitev bata 80 mm Vgradna višina 470 mm Število hodov 70 hodov/min Skupna potrebna moč 10,5 kW Teža stroja pribl. 9 t Dimenzije stroja D x Š x V 1,98 x 1,60 x 3,10 m

Stanje: rabljeno, Pressure: 160 t Installation height: 600 mm Stroke: 25 - 150 mm Table area: 1500 x 900 mm Ram area: 1500 x 900 mm Ram adjustment: 100 mm Clearance between guides: 1500 mm Clearance in side stands: 400 x 200 mm Frame width: 1680 mm Dkjdpfx Akocgqvpo Eet Machine weight: approx. 15 t Required space: approx. 2.7 x 1.8 x 4.4 m 2003 Modernisation / Retrofit The following work still needs to be carried out on the machine: - New control cabinet with ABB PLC - Separate two-hand control panel with foot switch - Vogel loss lubrication system

Leto izdelave: 1986, stanje: rabljeno, Pressing force: 15 t Dkjdpfxefn Apxe Ak Ejt Installation height: --- mm Strokes per minute: 200 – 2,000 Table surface: --- mm Ram area: 490 x 200 mm Sheet width: 5 – 50 mm Stroke adjustment: 10–30 mm Weight: 3 t Dimensions (L x W x H): 1,370 x 1,200 x 2,200 mm Drive power: 10 kW Pass-through opening in table: 350 x 100 mm Table width: 530 / 210 mm Table length: 530 / 350 mm Only 2 years in operation High-speed model

Stanje: rabljeno, Pressure: 200 t Throat depth: --- mm Stroke: 250 mm Table size: 2420 x 840 mm Ram area: 1850 x 650 mm Installation height: 500 mm Ram adjustment: 110 mm Column gap: 1900 mm Table height: 170 mm Stroke rate: 25 - 45 strokes/min Dkedpfxegk Rfzj Ak Eet Total power requirement: 22 kW Space requirement approx.: 2550 x 2370 x 3820 mm Weight: 30 t - Pneumatic clutch - Press safety valve, Herion - Cam switchgear, Balluff - Chain breakage monitoring - Hydraulic overload protection, HYDAC - Motorized ram adjustment with digital display - Free-standing control cabinet with ABB safety control system - Separate two-hand operation console with foot switch - Side safety doors, sliding - Front safety guards using BWS - vertical + horizontal The depicted and described machine is compliant for manual loading operations. The machine can also be equipped in another variant or used as an automatic press with feed system. Equipment can be adapted according to customer requirements.

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Dedjtqm Dgopfx Ak Eekt Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Leto izdelave: 1986, stanje: rabljeno, Pressing force 40 t Installation height 250 mm Stroke 8 - 50 mm Clamping area table (L x W) 620 x 450 mm Table height above floor 980 mm Strokes per minute 85 - 500 spm Dsdpfxjcb T Twe Ak Eokt Distance between uprights 680 mm Ram adjustment 50 mm Number of T-slots 4 Ram area mm Total power requirement 8 kW Space requirement approx. 2.3 x 2.2 x 2.8 m Machine weight approx. 5.8 t - Ram with 2 connecting rods - Unidor tool monitoring system - Kaiser gripper feeder right, strip width 180 mm, feed length 150 mm, max. 2 mm - Kaiser scrap shear left - Sound-insulated enclosure - Roller-mounted eccentric shaft

Stanje: novo, Stiskalni varnostni ventil IMI HERION / NORGREN PSV ventil, dvojni ventil, usmerjevalni ventil Tip: XSz 10 V Id. št.: 2492982 Serijska št.: 2608 Enak kot naročniška št.: 2492951 Tlak: 3 do 10 bar Navoj za priklop stisnjenega zraka (A)+(B)+(P)+(S): 1/2" Izhod stisnjenega zraka (R): prirobnični priklop Napajalna napetost: 2x 24 V (DC) - Osnovna plošča, razmak med luknjami 115 x 63 mm, 4x montažna luknja Ø 6,5 mm Dkodpew T U A Sefx Ak Est - Opremljen s dušilcem na izhodu stisnjenega zraka (R) Dimenzije ohišja ventila D x Š x V: 105 x 90 x 220 mm Dimenzije z dušilcem D x Š x V: 180 x 165 x 220 mm Teža: 3,0 kg Novo, neuporabljeno, iz zaloge

Stanje: rabljeno, Double-column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Drawing Press Machine no. 3973 Year of manufacture: 1983 Pressing force: 125 tons Dsdpfxoguvtls Ak Eekt Column spacing: 1,050 mm Lateral column opening: 550 mm Table surface: 1,000 x 800 mm Ram surface: 1,000 x 800 mm Ram stroke: 350 mm Max. installation height: 750 mm Table height above floor: 960 mm Blank holder force: approx. 12 tons at 105 bar Blank holder stroke: 100 mm Table opening diameter: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1,000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic blank holder under the table with bore through the table plate Ø 202 mm - Precise 4-column guidance system on ram corners - Infinitely variable pressing force adjustment - Adjustable fixed stop, electrically controlled via hydraulic motor - Cutting stroke damping - Two-hand control panel for ram stroke activation on the press - Free-standing control cabinet (1,600 x 500 mm) - Documentation available, including operating manual, electrical diagrams, and PLC program printout Space requirement (L x W x H): 2,600 x 2,400 x 4,270 mm Weight: approx. 14 tons In good condition

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06I/9135, Številka ponudbe: M06I/9135 Vrsta stroja: Dvotaktna stiskalnica Proizvajalec: NATIONAL Tip: 61LS Leto izdelave: 1980/2002 Območje premera: 6,35 mm Dkjdpfx Aksyya N Ss Eet Dolžina stebla pod glavo: 70 mm Dolžina odseka: 95 mm Zmogljivost kosov/min: 300 Lokacija: V Nemčiji

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8006, Številka ponudbe: M06L/8006 Vrsta stroja: Dvojna tlačilna stiskalnica Proizvajalec: Carlo Salvi Tip: 476SV Leto izdelave: 1980 Območje premera: 2-4,76 mm Dolžina stebla pod glavo: 46 mm Dsdpfx Akjwi Scpe Eekt Maks. dolžina obdelovanca: 60 mm Kapaciteta kosov/min: 470 Lokacija: Na naši zalogi

Stanje: rabljeno, Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8308, Številka ponudbe: M06L/8308 Tip stroja: Dvostranska stiskalnica Info: Pozitivno izmetavanje štance Proizvajalec: PELTZER-EHLERS Tip: DKP6 Leto izdelave: 1978 Območje premera: 3–6,5 mm Dolžina stebla pod glavo: 8–75 mm Maks. dolžina odseka: 100 mm Dodpfowi S D Hsx Ak Ejkt Kapaciteta kosov/min: 150 Lokacija: Na zalogi pri nas

Stanje: rabljeno, Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8200, Ponudbena številka: M06L/8200 Vrsta stroja: Dvotlačna stiskalnica Informacije: Pozitivni izmet štance Znamka: HILGELAND Dedpfx Aowi S Hnjk Eokt Tip: CH2KHA Leto izdelave: 1975 Območje premera: 4–8 mm Dolžina stebla pod glavo: 40 mm Maks. dolžina odseka: 71 mm Zmogljivost kosov/min: 250 Tlačna sila: 30 t Lokacija: Na zalogi pri nas

Stanje: rabljeno, Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/7593, Ponudbena številka: M06L/7593 Dkjdpfx Akowi S Swo Eet Vrsta stroja: Dvojni stiskalni stroj Podatki: Pozitivni izmet izsekovala Proizvajalec: PELTZER-EHLERS Tip: DKP16 Leto izdelave: 1972 Območje premera: 8-16 mm Dolžina trna pod glavo: 25-180 mm Maks. dolžina odreza: 220 mm Zmogljivost - kosov/min: 70 Lokacija: Na našem skladišču

Stanje: rabljeno, Leto izdelave: 1959, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/7570, Številka ponudbe: M06L/7570 Vrsta stroja: Dvojni stiskalni stroj Proizvajalec: HILGELAND Tip: CH1L Leto izdelave: 1959 Območje premera: 3–6 mm Dolžina stebla pod glavo: 6–60 mm Maks. dolžina odseka: 75 mm Kapaciteta – kosov/min: 180 Dkedpfx Akowi S S Dj Est Lokacija: Pri nas na zalogi

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06I/8947, Ponudbena številka: M06I/8947 Vrsta stroja: Dvo-tlačna stiskalnica Proizvajalec: FENG PEI Model: FWB 20-165 Leto izdelave: 2000 Razpon premera: 6 mm Dolžina stebla pod glavo: 145 mm Dolžina odseka: 165 mm Zmogljivost - kosov/min: 100 Dkjdpfxewi Tcwo Ak Est Lokacija: V Nemčiji

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8770, Ponudbena številka: M06L/8770 Tip stroja: Dvotlačna stiskalnica Informacije: Pozitivno izmetavanje štance Dksdpfxewi Tlfo Ak Ejt Znamka: HILGELAND Tip: CH00KHA Letnik: 1993 Območje premera: 1–4 mm Dolžina stebla pod glavo: 20 mm Maks. dolžina reza: 36 mm Zmogljivost – kosov/min: 460 Lokacija: V našem skladišču

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06I/8923, Številka ponudbe: M06I/8923 Vrsta stroja: Dvotlačna stiskalnica Informacije: zaprt nož Proizvajalec: NAKASHIMADA Tip: NS60E Leto izdelave: 2022 Premer – območje: 6 mm Dsdpfowi Ucxex Ak Eokt Dolžina odseka: 95 mm Dolžina stebla pod glavo: 75 mm Zmogljivost – kos/min: 200 Lokacija: V Nemčiji

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8498, Št. ponudbe: M06L/8498 Tip stroja: Dvotaktna stiskalnica Info: zaprto rezilo Proizvajalec: NATIONAL Tip: M34 S1 Dodpfxjwi Sxqe Ak Eokt Leto izdelave: 1979 Območje premera: 1-4 mm Dolžina stebla pod glavo: 25 mm Maks. dolžina odseka: 32 mm Zmogljivost - kosov/min: 350 Lokacija: Na zalogi pri nas

Stanje: rabljeno, Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8075, Ponudbena številka: M06L/8075 Vrsta stroja: Dvojni stiskalni stroj Dksdpfx Akewi S Nis Eet Informacija: Pozitivni izmet matričnega orodja Znamka: HILGELAND Tip: CH3LA Letnik izdelave: 1976 Območje premera: 5-10 mm Dolžina stebla pod glavo: 10-150 mm Maks. dolžina reza: 180 mm Zmogljivost kosov/min: 100 Lokacija: V naši zalogi

Stanje: rabljeno, Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/7480, Ponudbena številka: M06L/7480 Tip stroja: Dvotlačna stiskalnica Znamka: HEUER Tip: DSL6 Letnik: 1978 Premer območje: 3-6 mm Dolžina stebla pod glavo: 35-120 mm Maks. dolžina odseka: 146 mm Kapaciteta - kosov/min: 90 Lokacija: Na naši zalogi Dksdpfxewi S R Hj Ak Eet

Stanje: rabljeno, Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/7022, Ponudbena številka: M06L/7022 Vrsta stroja: Dvotlačna stiskalnica Proizvajalec: KLOSE Dkodpfjwi Ta Aox Ak Ejt Tip: DPL9 Leto izdelave: 1978 Obseg premera: 4-9 mm Dolžina stebla pod glavo: 100 mm Dolžina izseka: 120 mm Kapaciteta kosov/min: 100 Lokacija: Pri nas na zalogi