Dvojni tiskarski stroj

HILGELAND CH0K

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Odlično ohranjeni 5-osni brusilni stroj za orodja naprodaj zaradi neizkoriščenosti! Bsdpfjxw Sxkox Af Dswn

Stanje: zelo dobro (rabljeno), Krmiljenje: Heidenhain Positip 850; Vpenjalni sistem orodja: SK 40; Hidravlično vpenjanje orodja; Hod pinole: 100 mm; Miza: 800x480 mm; Bodpslkgvbofx Af Dewn Pomiki: x-600 mm, y-400 mm, z-400 mm; Hitri pomiki; Podajalne hitrosti: 63-800 mm/min (18 stopenj); Število obratov: 63-3150 vrt/min (18 stopenj); Dodatki: Hladilna naprava, vpenjalna glava za vpenjalne tule, vključno s tulemi, utorni glavi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 4.500 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 090119, Country of manufacture: CE – Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h – Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm Rotational range B-axis: 0.0001 – 360° Rotational range C1/C2-axis: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of stations: 24 Number of driven stations: 18 Number of static stations: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16 x 16 mm (20 x 20) Maximum turret head path above tool tip: 500 mm Speed of rotating tools: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø 42 x 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull/push force: 20,000 N FEED DRIVES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance rate) Chip conveyor submersible pump output: approx. 10 l/min at 4.5 bar      80 l/min at 3.2 bar      150 l/min at 0.7 bar Bedpfx Afjht Hg Dj Dswn High-pressure pump (in conveyor): 10 l/min at 13.2 bar      50 l/min at 9 bar      90 l/min at 1 bar Lubrication volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROLLER: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Repeatability: 0.6 µm Max. runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulic return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60 optional) Control voltage: 24V DC Total power: 35 kW Nominal current: 63A Connection: TM / TT / IT grid PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Valve voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop6611 NOISE EMISSION Normal operation: 78–80 dB Technical data subject to change; errors and omissions excepted Inventory No. 2321018; machine configuration: - Chip conveyor - Prepared for bar feeder installation Tool holders: - 6 fixed drill holders ER32 - 8 turning tool holders - 5 powered tool holders ER32 - 4 powered tool holders ER25 - 6 powered tool holders ER20

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), A DMT lathe is available. Centre distance: 1000 mm, swing diameter over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, spindle speed: 4000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions X/Y/Z: approx. 2150 mm/1150 mm/1700 mm, weight: approx. 1800 kg, control system: Heidenhain, operating hours: approx. 300 h. Documentation available. On-site inspection is possible. Bwjdpfxewtg H Rj Af Don

Stanje: dober (rabljeno), Laminating pressure: 220 kN Workpiece diameter: 3mm min; 70mm max Feed pitch: 6mm max Knurling pitch: 2.25mm max Roller width: 160mm max Roller diameter: 133mm min; 170mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54mm standard; 69.85mm special Center distance between shafts: 135mm min; 230mm max Bedsvyyyxspfx Af Dewn Working stroke: 15mm max Feed rate: from 0.5mm/s up to 6mm/s Laminating time: from 0.1s up to 100s Pause time: from 0.1s up to 100s Main motor: 5.5 kW Power consumption: 8.6 kW Tank capacity: 130 L Approximate weight: 2100 kg

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC See video The machine is powered and available in our warehouse Bedjuua H Ropfx Af Djwn Test run possible

Stanje: rabljeno, Leto izdelave: 1999, Cena: Po dogovoru Bedownhyhepfx Af Down - Leto izdelave: 1999 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Pomik X-osi [mm]: 900 - Pomik Y-osi [mm]: 550 - Pomik Z-osi [mm]: 360 - Širina mize [mm]: 790 - Globina mize [mm]: 380 - Največji premer brusilnega koluta [mm]: 400 - Največja hitrost vretena [vrt/min]: 3400 Finančne informacije DDV: Naveden cena je brez DDV-ja DDV/diferencirana obdavčitev: DDV je odbiten za podjetja Dostava in odkup strojev iz industrijskega področja možna kadarkoli Lukas van Rossum

Stanje: novo, Leto izdelave: 2025, KONSTRUKCIJA Pršilne kabine za prašno lakiranje tipa VFDK so zasnovane kot odprta stenska izvedba s kartušnim filtriranjem, namenjena ročni uporabi z ene strani. Kabine so izdelane iz prašno barvane pločevine na kolesih za lažje premikanje. Sistem vključuje filtracijski sistem z avtomatskim čiščenjem, prezračevanjem in električno krmilno omarico. Za visoko učinkovitost se uporabljajo vzdržljivi 100 % poliestrski kartušni filtri. DELOVNO NAČELO Zračni tok, ki ga ustvarja odsesovalni ventilator, prenaša delce prašnega laka do filtrirne enote in jih nabira na zunanji površini filtrov. Filtri se med delovanjem čistijo s povratnim pulznim ventilom. Akumuliran prašni premaz se na dnu kabine ročno zbere v predal, nato pa se lahko po presejanju ponovno uporabi. Po želji lahko dodamo zalogovnik z vibracijskim sitom za reciklažo prahu. PREDNOSTI - Prihranek prostora v delavnici Bwsdpfxevv H Hdo Af Den - Enostavno in hitro čiščenje Izdelano v Turčiji CE oznaka Ponujamo najboljše tehnične rešitve in konkurenčne cene. Kontaktirajte nas za več informacij in ponudbo.

Stanje: novo, Leto izdelave: 2026, The lathe is perfectly suited for efficient and precise machining of metal parts as well as other materials. The machine features functions for machining internal and external cylindrical, face, conical, semicircular surfaces, and threading. The bed is a sturdy cast iron structure, resistant to vibrations. The guideways are induction-hardened and ground. Technical Data: TURNING DIAMETER OVER BED: 320 mm TURNING DIAMETER OVER CROSS SLIDE: 160 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100-2500 rpm SPINDLE BORE: 46 mm SPINDLE MOUNT: MT5 NUMBER OF TOOLS: 6 TOOL SIZE: 16x16 mm MAXIMUM DIAMETER OF BAR THROUGH SPINDLE: 44 mm TAILSTOCK MOUNT: MT3 MAXIMUM TAILSTOCK QUILL TRAVEL: 100 mm MOTOR POWER: 3 kW DIMENSIONS: 2370 x 1420 x 2000 mm NET WEIGHT: 950/1300 kg Available Equipment: SINUMERIK 808D control in Polish SIEMENS servo drives 3-jaw hydraulic lathe chuck 6-position turret head Set of soft jaws Hydraulic tailstock Bsdpfxei Apg Uj Af Dswn Cooling system Automatic lubrication system for gearbox and guideways 24V halogen lighting Technical documentation (DTR) in Polish CE declaration The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for our full offer.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Deckel FP 4 M 3-osni digitalni prikazovalnik Heidenhain Bwedpjy Awz Rofx Af Don Delovno območje: 500 x 400 x 400 mm Pogonska moč: 4 kW Fiksna miza 800 x 460 mm Posoda za odrezke Vpenjališče vretena SK 40 Območje vrtljajev: 50–2500/min Pomiki: 8–630 mm/min Hitri pomik: 1,3 m/min Potrebni prostor cca 2 x 2 x 2 m Teža cca 1650 kg