Dil 00 40 nakup rabljenega (115.640)

Stanje: skoraj kot novo (rabljeno), prevoženi kilometri: 140.000 km, Leto izdelave: 2018, FIAT TALENTO YEAR 2018 EURO 6 140,000 KM INSULATED WITH ROAD FRIDGE UNIT 220V NETWORK ATP FNA VALID UNTIL 10/2027, RENEWABLE AIR CONDITIONING, FACTORY STEREO, STEERING WHEEL CONTROLS, ONE PREVIOUS OWNER, REGULARLY SERVICED AND FITTED WITH NEW TYRES, READY FOR USE, PAYLOAD 900 KG FINANCING AVAILABLE Itsdpfetv Ixvsx Ah Ajr

Stanje: rabljeno, prevoženi kilometri: 146.934 km, moč: 100 kW (135,96 KM), prva registracija: 03/2015, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 2.900 mm, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, Leto izdelave: 2015, Oprema: centralno zaklepanje, servovolan, Splošne informacije Število vrat: 2 Kabina: enojna Tehnične informacije Število valjev: 4 Prostornina motorja: 2.488 ccm Menjalnik: 6 prestav, ročni menjalnik Mere Dimenzije (D x Š x V): 585 x 224 x 303 cm Teže Lastna teža: 2.994 kg Nosilnost: 506 kg Dovoljeno skupno maso: 3.500 kg Funkcionalno Hladilni motor: električen Itjdpfx Ahsxzn Ehe Aor Debelina stene: 50 mm Notranjost Notranjost: siva Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 03.2026 Število ključev: 2 (2 daljinca) Varnost izdelka Proizvajalec: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Stanje: rabljeno, prevoženi kilometri: 526.891 km, moč: 294 kW (399,73 KM), prva registracija: 04/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 40 m³, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.220 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Tail Lift: BÄR - BC 2000kg S4-C4 for vehicle and trailer Refrigeration unit: CARRIER SUPRA 850 U Special equipment: Trailer coupling: Rockinger 400 G 150 A, trailer socket 12V / 13-pin and 24V / 15-pin, car phone antenna, electrically adjustable and heated exterior and wide-angle mirrors, wide-angle mirror with electric maneuvering aid, battery 225 Ah, mechanical battery disconnect switch, electrically adjustable and heated kerb mirror right side, bolted bridge mounting brackets, roof antenna for CB radio, rear axle differential lock, ETA circuit breaker, driver assistance system: emergency brake assist, comfort driver’s seat, air-sprung and heated, with lumbar support and shoulder adaptation, flame start system, 12-speed transmission - Type: ZF 12 AS, Tipmatic, multifunction steering wheel (leather), heated air dryer, additional air heater Eberspächer D4S, steered and liftable tag axle NOL-08, retarder, sound system, cab power outlet 12V and 24V, reinforced front axle shock absorbers, dropped front axle VOK-09, additional heated fuel filter with water separator Additional equipment: Axle configuration: 6x2, ambient lighting, curb/front mirror, trailer socket 24V / 7-pin, ABS trailer socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V with navigation system preparation, MAN-Tronic onboard computer, MAN-Brakematic electronic brake system, EURO 6 engine, cab with Nordic insulation, cab type: XL, suspension: leaf/air, electric windows, remote central locking, tinted windscreen, alternator 28 V 80 A, manual sunroof, body/chassis: chassis, EVB brake rocker lever, automatic climate control, heated fuel filter, fuel tank: combination tank - 400 L diesel + 60 L AdBlue, elevated air intake, air compressor 1-cylinder 360 cm³, engine 10.5 L - 294 kW diesel, engine encapsulation, wheelbase 4800 mm, spare wheel carrier behind rear axle, disc brakes rear and front axle, side underrun protection, tinted rear side windows, comfort quality seat upholstery, sun blind for windscreen and driver’s side window, driver’s door, spray suppression, anti-roll bar rear axle, anti-roll bar front axle, external access storage box, cab type operation, TGX, tinted door glass, rear underrun protection, front underrun protection, viscous fan, central locking, permissible gross weight 26,000 kg ---- TRAILER Make ACKERMANN Type Z-KAF 19 TE Vehicle type refrigeration box trailer Axle manufacturer MB First registration / MOT 04.2014 ? Tyres 315/70 R22.5 Tread depth in mm 7/6/8/6 Axle design MB/air/2-axle Gross weight 16,000 kg Unladen weight 6,420 kg Loading area 6.60 x 2.48 x 2.22 m Equipment: Trailer with through-loading capability, (refrigeration unit CARRIER SUPRA850U), tail lift BÄR BC 2000kg S4-C4 As inspected or offered, without any further services/accessories. Our offer is generally without new MOT (TÜV) approval. If a new MOT is required, we will gladly provide a quote from our partner workshops! The vehicle may be stickered and/or branded for advertising purposes. Our general terms and conditions of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! All details in advertisements, on the Internet, price tags and pictures are non-binding descriptions. Itjdpfsxf R Itsx Ah Ajr

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 123.648 km, moč: 107 kW (145,48 KM), prva registracija: 01/2020, vrsta goriva: dizel, velikost pnevmatike: 225/65R16, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, kapaciteta rezervoarja za gorivo: 75 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 3.510 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 2.050 mm, Leto izdelave: 2020, Oprema: ABS, airbag, centralno zaklepanje, dvižna zadnja plošča, filter saj, klimatska naprava, nadzor oprijema, navigacijski sistem, servovolan, tempomat, Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Drivetrain AdBlue system: Yes Transmission Transmission: 6-speed manual gearbox Axle configuration Tyre size: 225/65R16 Brakes: Disc brakes Front axle: Max. axle load: 1,850 kg; Steered; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: leaf suspension Rear axle: Max. axle load: 2,100 kg; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: air suspension Dimensions Dimensions (L x W x H): 650 x 210 x 272 cm Weights Unladen weight: 3,049 kg Payload: 451 kg Gross vehicle weight (GVW): 3,500 kg Functional Tail lift: DHOLLANDIA, rear tailgate, 500 kg capacity Cooling: -25 °C to +25 °C Body manufacturer: LAMBERET PULSOR 400 MT/STANDBY 230V Refrigeration unit: Diesel and electric Wall thickness: 10 mm Maintenance, history, and condition APK (Technical Inspection): valid until 01/2026 Technical condition: very good Visual condition: very good Identification Registration number: 208520 Further information Please contact Moussa or Youssef for further details. Itodewdv Rgspfx Ah Ajr Video work vehicle: Very well-maintained and unique Opel Movano 2.3D refrigerated van Carrier Pulsor 400 MT/Standby 230V (day and night cooling) 2 compartments, can cool down to -25 °C and heat up to +25 °C Foldable rear tailgate, load capacity 500 kg Rear air suspension 123,000 KM verifiable Refrigeration unit brand: Carrier

Stanje: rabljeno, prevoženi kilometri: 827.550 km, moč: 177 kW (240,65 KM), prva registracija: 06/2008, vrsta goriva: dizel, skupna masa: 18.600 kg, vrsta prenosa: samodejen, emisijski razred: Euro 4, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, TG18.240 Klimatska naprava Hladilna nadgradnja Védécar 7,50 metra Iodpfoxw Ixyox Ah Ajtr Hladilna enota Thermo King TS-300 E Listno in zračno vzmetenje Belgijska registracija

Leto izdelave: 1995, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SB11/300/40, For sale is a Weiss climate test chamber. Model: SB11/300/40 Temperature operation: -40 to +180 °C Climate operation: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature stability: - In climate mode: ±0.1 to ±0.5 K temporal temperature constancy - In heating/cooling mode (without climate): ±0.2 to ±0.5 K temporal temperature constancy Humidity stability: - Across the entire working range: ±2 to ±3 % r.h. Condenser: air-cooled Temperature change rate: - Cooling: approx. 3.1 K/min - Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg Connected load: 4.8 kVA Electrical connection: CEE plug 16 A Iedpsw Dygfofx Ah Aotr Supply voltage: 400 V / 3Ph + N + PE / 50 Hz (+6% / -10%) Refrigerant: R404A Design: mobile Type: SB11/300/40

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2010, dolžina tovornega prostora: 13.360 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.570 mm, skupna dolžina: 14.030 mm, skupna širina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, medosna razdalja: 9.020 mm, barva: bela, Leto izdelave: 2010, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Load securing rail - Lift axle - Air suspension - Rear portal doors - Disc brakes = Notes = LAG LOW-TEMPERATURE TRAILER WITH EKERI BODY AND SIDE DOORS / FULL SIDE OPENING, THERMO KING SLX 400 REFRIGERATION UNIT, DIESEL 8,078 HOURS / ELECTRIC 723 HOURS, SAF AXLES WITH DISC BRAKES (INTRADISC), 1X LIFT AXLE, ABS/EBS, TOOLBOXES, READY FOR OPERATION, DUTCH REGISTRATION DOCUMENT WITH TÜV UNTIL 08-2026 Video: Refrigeration unit brand: Thermo King = Additional Information = Axle configuration Tire size: 385/55 R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg Rear axle 2: max. axle load: 9,000 kg Rear axle 3: max. axle load: 9,000 kg Weights Unladen weight: 10,090 kg Payload: 31,910 kg Gross vehicle weight: 42,000 kg Functionality Cooling: -29°C to +27°C Bodywork brand: Thermo King SLX 400 Refrigeration motor: Diesel and electric (723 operating hours on diesel; 8,078 on electric) Itsdpfxexvylvs Ah Asr Wall thickness: 7 mm Maintenance, History and Condition APK (General Technical Inspection): valid until 08/2026 Technical condition: good Visual condition: good Identification Registration number: OL-03-BR = Company Information = Gast Trucks Venlo B.V. | Up to 30 pictures and a video available at request. Since 1998, we have specialized in purchasing, sales, import, and export of used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL). Transport and export documents / license plates for delivery to ports in the Netherlands, Belgium, or Germany available at extra cost. Reservation without down payment is not possible!

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 104,4 kW (141,94 KM), vrsta hlajenja: zrak, skupna masa: 1.260 kg, skupna širina: 1.100 mm, skupna dolžina: 3.200 mm, skupna višina: 2.080 mm, trajanje garancije: 6 meseci, Zračno hlajeni čiler TRANE ECGAN400 104,4 kW Hladilna zmogljivost: 104,4 kW / 29,23 ton (12/7 — 35°C) Leto izdelave: 2013 Itodpfsxgng Ajx Ah Aor Možnosti: hidravlični modul Hladilni krog: 1 kos Izmenjevalnik toplote: ploščni Kondenzator: baker / aluminij Kompresorji: 1 kos DANFOSS CSHA100KE (scroll) + 2 kosa DANFOSS CSHA150KE (scroll) Vrsta hladiva: R407c Število ventilatorjev: 3 kosi Hidravlični modul: 2 vodni črpalki Salmson, ekspanzijska posoda. Dimenzije: 3,2x1,1x2,08 m Teža: 1260 kg Obratovalne ure: 2026/2027/2026 h Stanje: dobro

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 259.937 km, moč: 400 kW (543,85 KM), prva registracija: 03/1999, vrsta goriva: dizel, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 6x2, gorivo: dizel, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: drugo, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.570 mm, Leto izdelave: 1999, Oprema: ABS, klimatska naprava, = Dodatne možnosti in oprema = - Električna okna - Servo volan - Radio/CD predvajalnik - Spalna kabina = Opombe = Iodpfxexvlvaj Ah Aetr PREVOZ V ANTWERPEN 590 EVROV = Dodatne informacije = Menjalnik Menjalnik: 16 prestav, ročni Konfiguracija osi Dimenzija pnevmatik: 315/80 R22,5 Sprednja os: vodena; vzmetenje: parabolične vzmeti Zadnja os 1: dvojna montaža; vzmetenje: zračno Zadnja os 2: vzmetenje: zračno Teže Lastna teža: 12.125 kg Nosilnost: 13.875 kg Skupna dovoljena masa: 26.000 kg Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Identifikacija Referenčna številka: 87

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2013, skupna dolžina: 14.050 mm, skupna širina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/55, medosna razdalja: 9.470 mm, Leto izdelave: 2013, Seite lader TUV Thermo King Kühlgerät Marke: Thermo King = Weitere Informationen = Achskonfiguration Hinterachse 1: Refenmaß: 385/55; Liftachse; Max. Achslast: 9000 kg; Reifen Profil links: 40%; Reifen Profil rechts: 40%; Federung: Luftfederung Hinterachse 2: Refenmaß: 385/55; Max. Achslast: 9000 kg; Reifen Profil links: 40%; Reifen Profil rechts: 40%; Federung: Luftfederung Hinterachse 3: Refenmaß: 385/55/22.5; Max. Achslast: 9000 kg; Reifen Profil links: 40%; Reifen Profil rechts: 40% Gewichte Leergewicht: 11.650 kg Zuladung: 33.350 kg zGG: 45.000 kg Funktionell Kühlmotor: Diesel und elektrisch Itsdpfxoxdtpdo Ah Asr Wartung, Verlauf und Zustand APK (Technische Hauptuntersuchung): geprüft bis 06.2026 Technischer Zustand: gut Optischer Zustand: gut Weitere Informationen Wenden Sie sich an Maarten Busser oder Niels Busser, um weitere Informationen zu erhalten.

Stanje: dober (rabljeno), Surface plate 1,000 x 400 mm Itjdpogqpn Sefx Ah Asr Height: 90 mm Weight: 80 kg

Stanje: novo, Leto izdelave: 2025, Table size: 3500 mm x 1500 mm Pump operating performance: -0.85 bar Storage tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Ijdpfsmftlyox Ah Astr Sound level: less than 70 dB Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 480 kg

Stanje: rabljeno, 2-axis linear guide with linear motors – Slide Arm Pick and Place with linear guides for automation applications. Loading unit similar to SCARA robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation. Manufacturer: SCHUNK – GEMOTEC – AFAG – LINMOT Model: PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of manufacture: approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal travel: 780 mm Nominal feeding force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeatability: +/- 0.05 mm Horizontal payload: max. 7000 g Guide pillar (horizontal): Ø 20 mm Vertical axis with linear motor LinMot type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical travel: 160 mm Nominal force vertical: 44 N Max. force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeatability: +/- 0.05 mm Guide pillar (vertical): Ø 20 mm Power supply: LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Iodpfeu H R Iwsx Ah Aetr Base frame support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting base: 2 x 175 x 90 mm Control voltage: 24 V DC - Can travel in two axes - Mounting plate for tool attachment 66 x 56 mm - Integrated position measurement - Axis modules with integrated position controller - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Installation dimensions (L x W x H): 1120 x 720 x 740 mm Net weight: approx. 65 kg Very good condition

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 61,6 kW (83,75 KM), vrsta hlajenja: zrak, skupna masa: 491 kg, skupna širina: 1.100 mm, skupna dolžina: 2.110 mm, skupna višina: 1.330 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 62,2 kW (84,57 KM), Zračno hlajen hladilnik/Toplotna črpalka CIAT ILD 0240R 0021 61,6 kW/62,2 kW Hladilna moč: 61,6 kW / 17,52 ton (12/7 — 35°C) Ogrevalna moč: 62,2 kW / 17,69 ton (40/45 —7°C) Leto izdelave: 2022 Možnosti: Toplotna črpalka. Hladilni krog: 1 kos Izmenjevalnik toplote: Ploščni Kondenzator: Baker / Aluminij Kompresorji: 2 kosa Danfoss DSF130A4ACA (scroll, mehki zagon) Tip hladilnega sredstva: R32 Število ventilatorjev: 1 kos Isdpfsxt D Ntox Ah Aetr Dimenzije: 2,11x1,1x1,33 m Teža: 491 kg Delovne ure: 372/370 h Stanje: Outlet.

Stanje: rabljeno, Leto izdelave: 2019, Rated output: 980 l Pump pressure: 8 / 20 bar Control: Contactors Machine weight: approx. 560 kg Required space: approx. 2.3 x 2.0 x 1.8 m Coolant system MAYFRAN - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - Universally applicable Itjdpfx Ahowhzmho Aor - Controllable via contactors - Incl. paper band filter - Number of pumps: 3 - Pump capacities: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -, - kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Stanje: rabljeno, Leto izdelave: 2012, x-hod 2500 mm y-hod 620 mm z-hod 520 mm Krmilnik Siemens 840 D Shop Mill Upalna površina mize 3000 x 600 mm Hitro pomikanje 45 m/min Območje vrtljajev 18000 vrt/min Pogonska moč - rezkalno vreteno 13,7 kW Orodni nosilec HSK 63 A Število orodij v magazinu 30 kos Teža stroja cca 9,0 t Dimenzije D x Š x V 8,3 x 4,2 x 3,6 m Ijdpow Np A Ssfx Ah Aotr Vertikalni obdelovalni center z gibljivim stojalom. - Transporter za ostružke - Zunanji ročni kolešček - 3D tipalo - Notranji dovod hladilne tekočine 80 bar - Trakasti filtrirni sistem - Električne žaluzije za nalaganje s pomočjo žerjava - 1x naprava za odsesavanje oljne megle

Stanje: rabljeno, Ta ponudba je za Thermo Fisher Scientific Labofuge 400R hladilno centrifugo. Itsdjxx Awgopfx Ah Aer Naprava je v popolnoma delujočem stanju in je takoj na voljo za uporabo. Thermo Fisher Scientific Labofuge 400R je zračno hlajena, tiho delujoča centrifuga s temperaturnim nadzorom za občutljive vzorce. Ta vsestranska hladilna centrifuga omogoča nastavitev temperature v območju 0–40 °C, kar zagotavlja nizko temperaturo tudi med daljšim delovanjem ali pri visokih hitrostih. Mikroprocesorski krmilnik stalno nadzira temperaturo in preprečuje zamrzovanje vzorcev. Širok nabor kompatibilnih rotorjev, ki jih nudi Thermo, omogoča uporabo različnih cevk. Enostavno upravljanje: Mikroprocesorska nadzorna plošča je nameščena spredaj za lažji dostop, s posameznimi prikazi za temperaturo, hitrost in RCF ter s prikazom časa vrtenja. Uporabniki lahko hitro nastavijo želene parametre s pomočjo tipkovnice na dotik, izberejo hitro vrtenje za kratke centrifugacije in vklopijo funkcijo mehkega zagona oziroma zaviranja za občutljive vzorce. Centrifuga deluje z induktivnim pogonom, ki ne zahteva vzdrževanja in omogoča zanesljivo obratovanje. Varnostne funkcije: Samodejni detektor neuravnoteženosti izklopi pogon, če je rotor neuravnotežen, s čimer ščiti sestavne dele in vaše delo. Prisotna je tudi zaščita pred previsoko hitrostjo rotorja za manjšo obrabo komponent. Jekleno ohišje in robustna konstrukcija omogočata skladnost s standardom IEC 1010. Labofuge 400R uporablja učinkovito in okolju prijazno tehnologijo hlajenja, vključno s hlajenjem v mirovanju ter hladilnim sredstvom R134A.

Stanje: novo, Leto izdelave: 2025, Table size: 3000 mm x 1500 mm Pump operating performance: -0.85 bar Vacuum pump capacity: 40 m³/h Itsdpeipv Nrefx Ah Aor Vacuum pump: Becker Sound level: less than 70 dB Storage tank: 100 l Machine length: 3100 mm Machine width: 1650 mm Machine width folded: 850 mm Weight: 425 kg

Stanje: rabljeno, Leto izdelave: 1961, Grinding length: 4000 mm Grinding width: 1100 mm Workpiece height: 1100 mm Machine weight: approx. 21 t Modernized precision surface and guideway grinding machine From a refurbishment operation. Among other things, beds for new KERN lathes have been ground on this machine. - Digital readouts retrofitted - Conversion to ball screw spindles on the cross axis - Grinding spindle for peripheral grinding - Swiveling grinding spindle for undercuts - Original hand scraping on the longitudinal axis - Electrical system renewed - Clamping area: 4300 x 1500 mm Isdpfxjvk Nllj Ah Aotr When using a pit, significantly higher workpieces can be ground!!!

Stanje: novo, Leto izdelave: 2024, stiskalna sila: 100 t, širina mize: 800 mm, dolžina mize: 800 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: READY STOCK TECHNICAL SPECIFICATIONS FOR 100/40 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS TYPE: 4-COLUMN COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts RAM CAPACITY: 100 TON POT CAPACITY: 40 TON DISTANCE BETWEEN COLUMNS: 800 x 800 mm USABLE WORKING AREA: 800 x 1100 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 600 mm POT STROKE: 200 mm MINIMUM GAP: 100 mm MAXIMUM GAP: 700 mm STRESS RELIEF: Vibratory stress relieve WELDING APPLICATION: EN ISO 15614-1/2017 certified welding application, accredited by TÜRK-AK and approved according to WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731.) PROPORTIONAL SPEED APPLICATION: System is designed with proportional speed feature. Different speed and stop values can be entered at various points of the pressing process to minimize the effects of material and die deformation on the operation. MAX OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 23 cm³ – VICKERS MOVING TABLE FAST DESCENT SPEED: 150 mm/sec – Proportionally Adjustable MOVING TABLE DEEP DRAWING SPEED: 15 mm/sec – Proportionally Adjustable MOVING TABLE RETURN SPEED: 150 mm/sec – Proportionally Adjustable POT TABLE ADVANCE SPEED: 30 mm/sec – Proportionally Adjustable POT TABLE RETURN SPEED: 70 mm/sec – Proportionally Adjustable MAIN CYLINDER BORE: Ø 220 mm – Ck45 POT CYLINDER BORE: Ø 140 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: Ck45 – 2 pcs APPROX. HEIGHT OF PRESS: 3900 mm APPROX. WIDTH OF PRESS: 1110 mm APPROX. DEPTH OF PRESS: 1110 mm DISTANCE OF LOWER TABLE FROM FLOOR: 1100 mm HYDRAULIC UNIT: VICKERS COOLING SYSTEM (with fan): CIESSE LEVEL INDICATOR: DONALTSON AIR FILTER: CIESSE RETURN FILTER: DONALTSON OIL & TEMPERATURE GAUGE: DONALTSON VALVES USED: EATON FILTER CONTAMINATION WARNING: ELECTRONIC CONTROLLED LUBRICATION SYSTEM: AUTOMATIC (ADJUSTABLE VIA SCREEN) RAM STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN POT STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN RAM TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN POT TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN SYSTEM ERROR INFORMATION: DISPLAYED ON SCREEN Itsdpfxsvkvu Tj Ah Asr PRESS STATUS INFORMATION: DISPLAYED ON SCREEN DIE MEMORY: ADJUSTABLE VIA SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFO: DISPLAYED ON SCREEN LINEAR SCALE: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL SCREEN: DELTA 7'' SWITCHGEAR: SIEMENS – SCHNEIDER SAFETY PLC: PILZ PNOZ MULTI LIGHT CURTAINS: LEUZE – 2 units APPROX. WEIGHT: 5.5 TON

Stanje: rabljeno, Leto izdelave: 2019, Output Capacity: 980 l Pump Pressure: 8 / 20 bar Control: Contactors Machine Weight: approx. 560 kg Required Space: approx. 2.3 x 2.0 x 1.8 m Coolant System MAYFRAN - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - Universally applicable - Controllable via contactors - Including paper band filter - Number of pumps: 2 - Pump performance: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, Pressure 25 bar, Max. Temp. 90°C -, - kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, Pressure 25 bar, Max. Temp. 90°C Iedpfewhzm Uex Ah Ajtr

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), številka stroja/vozila: RHBD2400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Inventory: 56.50 linear meters! Type BD2-400A / 400 Ampere - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Busbar lengths: 3.25m, 1.25m Price per meter includes connectors, end pieces, and mounting brackets. Incoming and outgoing boxes (feed and tap-off enclosures) for 16-32-63-125-250A are optionally available. Dismantling was carried out by a qualified electrician. Busbars are in excellent condition! Please inquire about your required lengths or accessories! Stock item, immediately available! Attention: 100A, 160A, and 250A busbars are also in stock – please inquire! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner components, feeds, and tap-off boxes for the old Klöckner Moeller BD1 system in stock! Please inquire! Itedpfx Ahsrfwnke Aor Are you also looking for a crane system?

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 850 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MSX-711 IV, obremenitev mize: 500 kg, število mest v zalogovniku orodij: 60, dolžina orodja: 500 mm, premer orodja: 140 mm, teža orodja: 12 g, Horizontal Machining Centre MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining centre, engineered to deliver exceptional precision, reliability, and continuous productivity, even during the most complex machining operations. Key features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Max spindle speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travel): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle centre – pallet surface distance: 100 – 830 mm Spindle nose – pallet centre distance: 100 – 950 mm Max workpiece size: Ø800 x 1,000 mm Rotary Table: Table size: 500 x 500 mm Ijdpfx Ahswxygze Astr Number of stations: 2 (with automatic pallet changer) Maximum pallet load: 500 kg Continuous table rotation: 360,000 positions Feeds: Rapid traverse (X/Y/Z): 50,000 mm/min Cutting feed (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max tool diameter: Ø140 mm (with adjacent tools: Ø70 mm) Max tool length: 500 mm Max tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chiller and transformer Retractable tool presetting sensor Comprehensive technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production environments, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, assuring highly complex machining processes with outstanding speed and precision.

Stanje: rabljeno, Van Der Heijden Cooling Unit Temperature range: 16°C - 22°C Operating hours: 250 hours Cooling: 192 hours Compressor: 194 hours Pump 1: 194 hours Pump 2: 61 hours You are welcome to arrange a viewing. We are happy to organise affordable shipping for you! You will receive a proper invoice. Iedpfxovv Si De Ah Astr For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Leto izdelave: 2021, Stanje: novo, številka stroja/vozila: TR0054_ALMRD400, New ALMIG ALM-RD400 Refrigerated Compressed Air Dryer (available immediately!) Including pre-filter and after-filter Iodpfx Aog Tvngsh Aotr Model: ALM-RD 400 Delivery rate: 6.25 m³/min* TR0054 Reliable and energy-efficient air-cooled refrigerated dryer ALM-RD 400 Compact footprint Low operating costs Two integrated filters (pre-filter and micro-filter) Energy-efficient refrigerant R134a State-of-the-art heat exchanger for maximum energy savings Max. operating pressure: 16 bar Max. inlet temperature: 60°C Min./max. ambient temperature: 5/50°C Voltage/Frequency: 230V/50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 555 x 505 x 874 mm Weight: 86 kg * Maximum compressed air flow at 35°C inlet temperature, 7 bar, 25°C ambient temperature, pressure dew point 3°C Water in compressed air can cause severe damage to pneumatic tools, expensive machinery (CNC), or similar applications. Therefore, we recommend one of our competitively priced compressed air dryers from the ALM-RD series. Convenient leasing for new machines available through our partner bank. Visit our showroom! We always have a large selection of new and used compressors in stock!