Vakuumska membranska stiskalnica

Istra VPR-3000x1500/40

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Itedpfxolht Hzs Adked Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Itsdpfxodnxyds Adkjd Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Itsdpfx Adsu Egp Isksd Weight: 950 kg

Stanje: rabljeno, Leto izdelave: 1992, Number of spindles (row drilling): 16 Number of horizontal spindles: 5 Cup hinge boring head: yes Drill spacing: 32 mm Itsdpfxjwv Nb Ne Adkod Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: tiltable

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Max. spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Incl. chamfering unit Separate motor for each spindle Electronic feed, incl. brake, infinitely variable 5-40 m/min. Durofer pointed-tooth feed rollers Short infeed table 1.2 m long with 2 powered rollers above the table Machine table surface hard-coated Manual lubricator pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Itjdpjrq Ebfsfx Adksd Declaration of conformity

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Ijdpferigxysx Adkstd Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2022, stanje: novo, angle: 0° - 90° Iedpji Ezr Nofx Adkjtd maximum cutting length: 1,370 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h With top and bottom heating approx.: 17,715 KJ/h Iodpfeq A Um Rex Adkjtd Special equipment: Hollow floor device available Control cabinet: included

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Itjdpsw I Uxcefx Adkjd Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Itodewt Snyjpfx Adked Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each