Demag V 70 nakup rabljenega (512)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) Nedpfx Aeyg Nkwsdvskw • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) Nkodpfx Asyfq Aledvjw • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Leto izdelave: 2019, obratovalne ure: 18.138 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije • Premer polža: 50 mm Nkedpfx Adex D Nxzovew • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGOTECH 200 - 840, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 560 mm, delovna prostornina: 442 cm³, minimalna višina orodja: 340 mm, širina plošče: 860 mm, višina plošče: 860 mm, moč črpalke: 30.000 W, Stroj je popolnoma delujoč, do konca je deloval na brizgalnem stroju. Njdsyxn Tvjpfx Advokw

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Mounting platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Shot volume: 7300 cm³ Shot weight (PS): 6640 g Maximum injection pressure: 1300 bar Screw length: 20 L/D Electrical and Hydraulic Equipment Pump drive rated power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System (ESS) The machine can be equipped with a modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor operation via a frequency inverter, adjusting the motor speed to the current requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Nkedpfx Adjyugctsvjw Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in plastics processing industry - Reduced energy losses during idle - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Suitable for retrofitting existing hydraulic injection moulding machines The ESS system significantly lowers machine operating costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping unit Clamping force: 15,000 kN Platens dimensions (horizontal × vertical): 2150 × 1880 mm Tie bar spacing (horizontal × vertical): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and hydraulic equipment Pump motor rating: 165 kW Heater power: 97 kW Machine dimensions and weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board (cable plate) 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod with seals 2017 – replacement of oil cooler circulation pump 2017 – TeachBox (robot) replacement 2018 – replacement of P1 + P3 pumps (at 65,800 h) 2018 – hydraulic oil change Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to match the machine’s actual demand during the production cycle. As a result, electrical energy is consumed only when it is actually needed. Key benefits: - Reduction of electricity consumption by up to 30% - Servo technology for hydraulic pump drive - World-class, proven technology used in plastics processing industry - Reduced energy losses during machine idle Njdpfeyugaljx Advekw - Lower heating of hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significantly reduced machine operating costs while maintaining full production capabilities.

Stanje: rabljeno, Wall-mounted slewing crane DEMAG type KBK 2 Demag serial no. jib arm: KBK-982 040 44 Demag serial no. wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height underside jib to top edge wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to jib tip: 4330 mm - Jib profile C-profile rail DEMAG KBK 2 Nkedpfotqwrvex Advow - Trolley for C-profile rail DEMAG KBK 2 - Original paint, yellow Dead weight: 170 kg In very good condition Price without chain hoist – Chain hoist or crane also available in the shop.

Stanje: dober (rabljeno), Demag chain hoist Model: PK2N-F, PK2N Lifting capacity: 250 kg (single-strand) or 500 kg (double-strand), Nkjdjcalf Aepfx Advsw Sample photo, various versions available, Ready for immediate use.

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 200 kN, delovna prostornina: 763 cm³, tlak vbrizgavanja: 1.905 letvica, skupna masa: 10.600 kg, premer polžastega transporterja: 60 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Nkjdpfxsylz Apo Advew

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Nksdpfx Adsylz Aiovjw

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from Lotze HDZK swivel bending machine -Type: 24/14K4 Nkedoip Eraepfx Advsw -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380 V -Dimensions: 980/400/H410 mm -Weight: 255 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09550933, Leto izdelave: 2025, vhodna napetost: 400 V, Novo pestno motor KBH225 B6 DH2000 Demag id št.: 09550933 za dvižno napravo z vrvjo DH2000 POZOR! Na zalogi imamo več kot 15.000 Demag delov Več informacij najdete na naši spletni strani ali v drugih oglasih Nedpeyw T Hrofx Advokw

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 1,5 kW (2,04 KM), največja hitrost vrtenja: 1.430 obr/min, Demag motor ZBA90 B-4 ED=60% 1,50 kW 1430 obr/min 20,00 Nm Nsdpfx Asywk Tpodvekw Zavoro B020 Stanje: Nov Izvedba sklopke Cena po dogovoru

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), največja hitrost vrtenja: 1.425 obr/min, Demag motor KBA112 B4 Stanje: Novo Izvedba B14 ED = 40% Zavoro lahek / stožčast 4,5 kW 1425 vrt/min 50 Hz cena po povpraševanju Njdpjywk N Djfx Advekw

Stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, Demag T12 / KBA125 / FG08 / KBA80 Novo! T12 i = 24,8 KBA125 B-4 FG08 i = 9,87 KBA80 A-4 Njdpfxoywk Erj Advjkw Cena na zahtevo

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 5,7 kW (7,75 KM), največja hitrost vrtenja: 1.415 obr/min, Demag motor/reduktor KBA125 B-4 / AF18 i = 181 ED = 100% 5,7 kW 1415 obr./min Nkodpfx Adoywkwzovew Stanje motorja: Pregledan cena na zahtevo

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), največja hitrost vrtenja: 2.700 obr/min, Demag motor/reduktor KBA 100 A -12/2 ED = 15/40% 0,21 / 2,2 kW 425 / 2700 o/min Nkjdpfx Aeywkq Uodvjw Zobniški prenos DO8 i = 3,24 premer osi 50 mm Stanje: kot nov cena na vprašanje

Stanje: novo, Leto izdelave: 2021, moč: 5,6 kW (7,61 KM), največja hitrost vrtenja: 1.455 obr/min, Demag motor ZBA 132 AL-4 Stanje: novo Izvedba B14 ED=100% 1455 obr/min 5,6kW Izvedba s sklopko Nksdeywkk Iopfx Advow Cena na zahtevo

Stanje: novo, Leto izdelave: 2022, moč: 10 kW (13,60 KM), največja hitrost vrtenja: 2.800 obr/min, Demag motor GCH140 D2 Stanje: novo, cena na povpraševanje ED 100 % 10,00 kW 31,5 A Nkjdpfjywi R Tjx Advsw 2800 obr/min 380V 50 Hz Zavora: 19 Nm

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 30 mm, Injection moulding machine from Demag, model 80/420-200 System, for sale. The machine is in good and fully functional condition. ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Nkodpfxsnfu I Is Advew Clamping force: 800 kN Tie bar distance (vertical): 420 mm Tie bar distance (horizontal): 420 mm Platen size (horizontal): 590 mm Platen size (vertical): 600 mm Minimum installation height: 250 mm Maximum platen gap: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Max. mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.5 x 2 m Weight: 4 t Transport and loading can be organised across Europe at extra cost on request. Prices plus VAT. Inspection possible upon appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet economical metalworking machine for your production? Or would you like to sell yours? For more information or ways to contact us, please visit our website.

Stanje: rabljeno, Pillar jib crane, slewing jib crane Demag PK5N-F chain hoist with standard lift and fine lift, jib length: 4 m, already dismantled and loaded on pallet. Very good condition Njdpscalfkefx Advskw