Demag Pk 1 nakup rabljenega (510)

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Klodpfswlkcaox Abxsu Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Delivery time: to be agreed Kljdpswz R Iuefx Abxju Freight terms: ex works

Stanje: pripravljen za uporabo (rabljen), Approx. 120 units = 480 linear meters of safety conductor lines Number of conductors/poles: 5 Kledpfxod Hurbs Abxou Standard length: 4 m Conductor rail cross-section: 10 mm² For mains voltage up to: 500 V Continuous duty current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-4BR125, DEMAG KBK crane runway (overhead crane system), approx. 33 x 6.5 m, including 4 cranes Load capacity / lifting capacity: 4x 125 kg (0.125 t) The crane system can also be shortened to half its length. Technical data of the system: Crane runway made of Demag KBK2 / KBK2T tracks The system is delivered complete: KBK tracks, track connectors, travel carriages, end plates, cable trolley, power feed system, mounts/hangers, etc. Including 4 bridge cranes with 125 kg chain hoists: 3x Demag DC-COM + 1x Stahl The crane has been dismantled and is available immediately. Very good used condition. Please see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only. Kjdpfx Abom Tvvisxelu Demag KBK1, KBK2 and KBK3 tracks are in stock! Other KBK crane systems available. Load capacities from 125 kg to 1,600 kg. Please enquire about crane runways with required load capacity and dimensions.

Leto izdelave: 1999, stanje: rabljeno, DEMAG KBK 2 - Crane Runway Ceiling System Hall Crane Please inquire about crane runways according to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg Technical data of the system: Demag KBK 2 profile rails Also available as single-rail tracks with curve sections and switches! Mounting height variable The system can be supplied complete, including: Kodect Dhaopfx Abxjlu KBK rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, etc. All electric chain hoists are optionally available. Thanks to the low dead weight, installation is also possible in lightweight constructions, timber halls, or older buildings. Very good used condition Rails available in yellow or red! Shipping by freight carrier possible, but collection preferred Demag KBK1, KBK2, and KBK3 rails are in stock! Contact: Mr. Goepferich info[at]mobatgg.de

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: Kljdpfoxhfuajx Abxsu The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Stanje: zelo dobro (rabljeno), Tehnološki modul za brizganje: Kjdpfx Absqxdnlexelu TX DIAS RX DIAS PLUS..... 2 kom. krmilne kartice Demag

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), številka stroja/vozila: TH20010018, Demag overhead crane, crane track, hall crane, crane Payload / max lifting capacity: 3.2t - 3200kg, span 13,300mm External dimension with end carriage approx. 13,500mm Crane with frequency inverter control and servo motors!!! 2x Demag DH wire rope hoists with pendant and remote radio control RC-J for single or tandem operation of both hoists Height from top edge of crane to hook approx. 900mm Kjdov A Rr Dopfx Abxjlu End carriage length with buffer approx. 2,500mm Hoisting height of wire rope hoist: 6,000mm Weight approx. 3,200kg Includes 2x 25m running rails HEB400 (400x300mm), includes conductor rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing: 10/10+5m Crane is dismantled and immediately available ex location 75053 Gondelsheim Very good used condition ----- Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible, please inquire with postcode Collection preferred

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG stropni žerjav KBKII -R, žerjavna naprava, delavniški žerjav, mostni žerjav Nova cena: več kot 40.000,00 € Ksdpov Uvdpjfx Abxslu Z izmenjevalnikom tirov levo, ročna izvedba, art. št. 87396344 (sama stane 11.000,00 € neto nova cena) 6x 6m ravni deli 2x 5m 4x 2m 3x 1,5m (skupaj 60 tekočih metrov ravnih delov z integrirano notranjo napajalno tirnico, ni potrebna vlečna kabelska veriga!) 2x 90-stopinjski ovinek KBKII-R z vsemi potrebnimi deli kot so vozički, obešala, objemke ipd. Možnost: 4x DEMAG električni verižno dvigalo PK5 N-F 500kg, 2 hitrosti (pripada napravi, a ni nujno za prodajo), zelo dobro stanje Naprava v preizkušenem stanju z revizijsko knjigo, popolnoma funkcionalna, takoj pripravljena za uporabo Info: več kot 20.000 DEMAG rezervnih delov na zalogi! Oglejte si tudi ostale ponudbe iz moje zaloge!

Stanje: dober (rabljeno), 1. DEMAG bobnasta zavora Tip: TH806/60 - RT315 TH806 Na voljo 1 kos. 2. ELDRO elektrohidravlični dvižni aparat Ed 1250/60 Klodpfeu Uvmfsx Abxeu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG dvigalo P400 P600 P1000 skupaj 24 delov - Precizni pogon FG - Glavni dvižni motor - Ohišje - Boben za vrv - Vodilo vrvi - Zavora Dobro stanje, deloma odlično rabljeno do novo Info: 20.000 nadomestnih delov in komponent DEMAG na zalogi! skladišče DEMAG delov Kodpfx Absv Uvubjxslu

Stanje: potreben popravila (rabljeno), Leto izdelave: 1998, Funkcionalnost: nefunkcionalno, Prodamo stroj Demag 110 9 t letnik 1998. Stroj ni operativen in je potreben obnove. Kljdpfx Abox A Sptexju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Poids total env. 300 kg, alimentation 400V 50Hz. Très bon état, voir photos. Localisation de l’article : 75053 Gondelsheim Klodpfx Abey D D S Soxou Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: WIL134, Demag EPKE overhead crane / gantry crane / bridge crane incl. steel structure + floor control Steel structure dimensions approx.: length 44m x width 11.2m with 1x bridge crane 2,500 kg Lifting height 6m, lifting speed 0.8/4.5 m/min, reeving 4/1 Kjdpfx Aew Ixz Usbxolu Payload/lifting capacity: 2.5 tons – 2,500 kg Technical data of the system: Crane runway / steel construction made of HEA/HEB180/240 beams, running rails HEB280 Length, outer edge of steel structure: approx. 44m Total width, outer edge (steel structure): approx. 11.2m Total crane height: approx. 5.2m Top edge of running rail: approx. 4.87m Bottom edge of running rail: approx. 4.59m Top edge of bridge: approx. 4.52m Bottom edge of bridge: approx. 4.83m Hook height: approx. 4.3m Gauge: approx. 10.8m Column spacing: tbd Some columns are partially embedded in concrete; these will be cut 5cm below the upper floor edge! System is delivered complete: Steel construction complete incl. conductor rail 1x bridge incl. travel drives and Demag DR 2.5t hoist unit Crane is dismantled and immediately available Location of the item: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment only

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: Res BS, Demag PK2 Chain Hoist Crane Lifting Gear 250Kg / 500Kg Approx. 40 units available!!! 250KG / 0.25t load capacity / lifting capacity – single-fall – 500.- 500KG / 0.5t load capacity / lifting capacity – double-fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Delivered complete with control pendant and load hook Total weight approx. 40 kg, connection to 380V 50Hz TOP condition, fully functional. Not a worn or used-up unit! Klodpfxsvzkyle Abxou Just connect and start operating. Comes from ongoing operation. Item location: 75053 Gondelsheim See pictures

Leto izdelave: 1999, stanje: dober (rabljeno), DEMAG KBK overhead crane system, crane runway, approx. 20 x 6 m Load capacity / lifting capacity: 1,000 kg (1.0 t) Technical data of the system: Crane runway constructed from Demag KBK2 rails Mounting height variable, chain length approx. 4 m Kodpfect Dhysx Abxjlu System is delivered complete: - KBK rails, rail connectors - Carriages, end plates, cable trolley, brackets/hangers, etc. Including double girder bridge with Demag 1t chain hoist System is NOT electrically traversable as shown in the pictures – no travel drives included! Photos show the same system in 12 x 6 m design Shipping by carrier possible, collection preferred Demag KBK1, KBK2, and KBK3 rails are in stock! Shipping by truck, €450 net within approx. 350 km radius For other dimensions or shipping rates, please inquire – we will provide you with a prompt, non-binding offer!

Stanje: rabljeno, Nadgradni žerjav z dvižnim motorjem in upravljalnim terminalom. Širina: 15,5 m Višina: 4,5 m (maksimalna konstrukcijska višina) Globina: 7 m Stanje: dobro, rabljeno Klsdpoy Hp T Tefx Abxju

Stanje: zelo dobro (rabljeno), DEMAG hoisting motor for DH1000 / DH1200 hoist Klodpfsv Uvdiex Abxju Type KBH160 B4 Excellent condition, overhauled, original price €14,600.00 Several in stock Also individual parts available, both new and used Offered well below manufacturer's original price

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 57.628 h, vpenjalna sila: 800 kN, premer vijaka: 35 mm, injekcijska masa: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. With a clamping force of 800 kN and a screw diameter of 35 mm, it is suitable for processing a range of materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann linear robot and a Gravimax 14R gravimetric mixer. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine DEMAG SYSTEC 80/420-310, which we offer for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C Kledoyyyuuspfx Abxeu • Tie bar spacing: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (PLC): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle count: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Maximum pressure (Pmax): 235 bar • Maximum flow rate (Qmax): 104 l/min • Mold installation height: 300 mm • Maximum daylight between platen: 750 mm • Availability: mid-2026 Additional equipment • Wittmann linear robot (handling/robot) • Gravimax 14R gravimetric mixer • TORO Systems material loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. Featuring a clamping force of 1500 kN and a screw diameter of 45 mm, it is suitable for processing various materials such as PA, PP, PE, and ABS. The machine offers a maximum pressure of 190 bar and a shot volume of 358 cm³. If you are looking for a high-quality injection moulding machine, we recommend considering the hydraulic DEMAG ERGOTECH 1500-840, which we have available for sale. Contact us for further details. Ksdpeyyyn Uofx Abxelu • Shot volume: 358 cm³ • Processed materials: PA, PP, PE, ABS, etc. • Barrel temperature: up to 450 °C • Maximum pressure: 190 bar • Maximum flow rate (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of manufacture: 1999 • Availability: mid-2026 Additional Equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) – X-stroke: 550 mm – Y-stroke: 1200 mm – Z-stroke: 2000 mm – Weight: 300 kg • Wittmann W633 – Robot no: W633 – X-stroke: 500 mm – Y-stroke: 1400 mm – Z-stroke: 2000 mm – Weight: 475 kg • Wittmann W743 – Robot no: W743 – X-stroke: 1200 mm – Y-stroke: 2000 mm – Z-stroke: 4000 mm – Weight: 835 kg – Connected load: 18 A / 12.5 kVA – Voltage: 400 V

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Hidravlični stroj za brizganje iz leta 1999. DEMAG Ergotech 150-610 Viva ima premer polža 45 mm in največjo prosto razdaljo med ploščama 850 mm. Teža brizga je 260 g, maksimalna vgradna višina orodja pa 250 mm. Če iščete kakovosten stroj za brizganje, razmislite o DEMAG Ergotech 150-610 Viva, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. Kedpfx Aeyxrt Tsbxjlu

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 36.170 h, številka stroja/vozila: 50557900, moč: 260 kW (353,50 KM), obratovalni tlak: 9 letvica, DEMAG zračni kompresor z vključenim sušilnikom zraka PARKER HIROSS! TEHNIČNI PODATKI Tlak zraka: 9 bar Pretok zraka: 28 m³/min Nazivna moč motorja: 260 kW PODROBNOSTI STROJA Kodpfey Iapnex Abxolu Električna napetost: 400 V Električna frekvenca: 50 Hz Maksimalna delovna temperatura: 65 °C Hladilno sredstvo: 407C 7,5 kg Obratovalne ure: 36.170 h OPREMA Sušilnik zraka PARKER HIROSS POLESTAR SMART Tip: PST460 Serijska številka: 398037030001 Letnik izdelave: 2011 Moč motorja: 6,26 kW Teža: 525 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 25.500 h, vpenjalna sila: 10.000 kN, premer vijaka: 110 mm, delovna prostornina: 3.136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Kjdsygk Eiopfx Abxslu

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), številka stroja/vozila: SI8x4125, DEMAG KBK crane runway with dimensions approx. 6x5m (5m bridge) This crane is available multiple times! Load capacity / lifting capacity 125 KG - 0.125 t Technical data of the system: Runway made from Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane features internal power supply Including 125KG Demag DC chain hoist – lifting height approx. 3.5m Crane is dismantled and immediately available Kjdpjupwa Rsfx Abxolu Used condition, see pictures Item location is 75053 Gondelsheim Shipping via freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125KG – 1600KG are also available. Please send us your inquiry for cranes specifying required load capacity and dimensions – non-binding.

Leto izdelave: 1996, stanje: rabljeno, številka stroja/vozila: MBMAKZ, Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 250 kg / 0.25 t load capacity / lifting capacity – single-strand Distance between the two lifting chains approx. 1.2 m (can also be shortened) Lifting height approx. 3.5 m Kedpetn Rirjfx Abxelu Complete with pendant control (approx. 3 m) Total weight approx. 60 kg, connection 400V 50Hz TOP condition, fully functional. Not a worn or used-up device! Connect and start operating. Taken from running operation Item location: 75053 Gondelsheim See pictures