Demag Kbk nakup rabljenega (499)

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.700 kN, Oprema: dokumentacija / priročnik, Zatezna sila: 170 t Premer vijaka: 45 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Pjdpfx Aox Ury Esczspl Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2004, Vpenjalna sila: 110 t Pjdpfxex Urxns Aczjpl Premer vijaka: 40 mm Razdalja med stebri V: 465 mm Razdalja med stebri H: 465 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm Ppjdpfx Acoyfq Alszjl • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Plošča: NC5 Vpenjalna sila: 100 t Ppjdpfx Aex Tdwysczjl Premer vijaka: 30 mm Razdalja med nosilci V: 420 mm Razdalja med nosilci H: 420 mm Tip: Horizontalen Pogon: Hidravlični Morda kupite Wittmann W818 linearni robot Z= 1500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 1.000 kN, Spannkraft: 100 t Psdpfsx Tdp Nex Aczepl Schraubendurchmesser: 30 mm Abstand zwischen den Holmen V: 420 mm Abstand zwischen den Holmen H: 420 mm Typ: Horizontal Antrieb: Hydraulisch Zusatzausrüstung: 1. 2 hydraulische Kernzugkreise an der beweglichen Aufspannplatte (Proportionalventile) 2. Zusätzliche Anschlüsse für 2 Kernzüge an der festen Aufspannplatte 3. Pneumatischer Kernzug (2 Kreise) an der beweglichen Aufspannplatte 4. 4-Zonen-Kühlwasserdurchflussregler mit Temperaturanzeige 5. Druckluftblasventile an der festen und beweglichen Aufspannplatte (programmierbar) 6. Integrierte Heißkanalregelung, 8 Zonen 7. Schnittstellen für externe Düsenheizbänder 8. Schnittstelle für integrierte Temperiergeräte (bis zu 6 Kreise) 9. Schnittstelle für Werkzeugtemperaturüberwachung (2 Kreise) 10. EUROMAP 67 für Automatisierungsgeräte

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). Podpfxjx Sqi He Aczspl LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Leto izdelave: 2019, obratovalne ure: 18.138 h, Stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Pjdpfx Acjx D Nxzozepl Dodatne informacije • Premer polža: 50 mm • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 12.396 h, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Ta DEMAG Ergotech 4200-2300 je bila izdelana leta 1998. Gre za hidravlični brizgalni stroj z zapiralno silo 4200 kN in vključenim Wittmann robotom. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja DEMAG Ergotech 4200-2300. Kontaktirajte nas za dodatne informacije. • Wittmann vključen Ppjdpfx Ajx D Hyvsczsl

Stanje: dober (rabljeno), Leto izdelave: 1975, Crane trolley, manufacturer: DEMAG, type: PL 168 NF, year of manufacture: 1975. Load capacity: 3,200 kg, lifting height: 4 m. Equipped with pendant control. In good condition. Ppjdpfjubbr Tex Aczjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Ppsdpjyctgbofx Aczsl Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Ppsdpsyctfqofx Aczsl Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Podjyctd Tepfx Aczopl Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Psdjycqy Ejpfx Aczopl Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sumitomo Demag IntElekt 50/370-200 / Električni stroj za brizganje Leto izdelave: 2009 Brizgalna enota: Premer polža: 25 mm Brizgalna teža: 39 g Brizgalni tlak: 1580 bar Dozirna prostornina: 44 ccm Podpfxsycqyxj Aczspl Zapiralna enota: Zapiralna sila: 50 t Razdalja med stebri: 370x370 mm Velikost pritrdilnih plošč: 520x570 mm Izmetalnik: električen Zapiralna enota: kolenčasto vzvodna Krmiljenje: NC5 – zaslon na dotik Dodatna oprema: Električni stroj: visoko zmogljiv, varčen in zelo tih Euromap 67 Robotski vmesnik Zračni ventili x 4 Krmiljenje z vročimi kanali Brizgalni agregat kaljen – bimetal Centralno mazanje Možna je menjava premera polža Dimenzije: Teža: 4750 kg Dolžina/Širina/Višina: 4,20x1,26x1,84 m Pogon: Ogrevalna moč: 5,7 kW Vsi ponujeni stroji so pred prodajo zagnani s strani naših servisnih tehnikov. Možno je prejeti video tehničnih testiranj izbranega stroja ali osebno sodelovati pri tehničnem preizkusu v našem podjetju v Łódźu. Cena: Po dogovoru

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Pjdpfeycqyrjx Aczopl Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension Pjdpfxox D Rqrs Aczepl • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Psdpfxox D Nwqs Aczspl Dimensions Machine depth: 6,600 mm

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Ppjdpfx Aexcbnljczjl Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2 kosa DEMAG voziček 3,2 t, kompletno z dvižnim vitlom PLV168 zelo dobro stanje, takoj pripravljen za uporabo 1 kos za 3.300,00 € neto 2 kosa za 6.200,00 € neto DEMAG kotalni obročni motor 36/24 S4 GÜ Fina prestava FG36 19K ali Fina prestava 72 DFg obnovljeno ali Dvižni motor 36/24 K6P 24/14 K4P 24/10 K4P Info: Na zalogi 20.000 DEMAG rezervnih delov in komponent! DEMAG skladišče rezervnih delov Ppedpfxswafide Aczsl

Stanje: zelo dobro (rabljeno), Pogonski motor DEMAG 36/24 K6P za električni vitel s jeklenico P2000 / P1600. Na željo z dodano sklopko in zavorno ploščo. Tip 36/24 K6P, motor generalno obnovljen, v zelo dobrem stanju. Sidro / rotor / tekač, ležajna ohišja, sklopka in zavora so na voljo tudi posamezno. Ppodsv Uai Aspfx Aczol

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 58.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 502748, vpenjalna sila: 1.000 kN, premer vijaka: 30 mm, razmak između stupova: 420 mm, delovna prostornina: 144 cm³, tlak vbrizgavanja: 1,905 letvica, izmetalna sila: 41 N, hod izmetalca: 150 mm, odmični hod: 500 mm, dolžina plošče: 590 mm, širina plošče: 590 mm, vgradna višina: 250 mm, skupna dolžina: 4.550 mm, skupna širina: 1.450 mm, skupna višina: 2.000 mm, skupna masa: 4.800 kg, ogrevalna zmogljivost: 9 kW (12,24 KM), moč črpalke: 30.000 W, vrsta nastavitve višine: hidravlični, hod: 150 mm, višina orodja: 250 mm, teža orodja: 700.000 g, Oprema: dokumentacija / priročnik, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Pjdpfx Aotltvzjczjpl Asking price: €8,000.00 – WITHOUT Wittmann peripheral devices The injection moulding machine is in good condition and ready for operation. Offered for sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all associated Wittmann peripheral devices can be included for an additional charge. We acquired the Demag ERGOtech in 2020 as part of our company expansion for a customer project and equipped it with appropriate Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and shows no defects. OPTIONALLY, we are also offering all related Wittmann peripheral equipment for sale: Peripheral devices from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: - 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l - 1 pc. Flow measurement – ultrasonic 140–180° - 1 pc. Digital interface 20mA - 1 pc. Packaging for temperature control unit List price: €6,980.00 Sales price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects List price: €4,750.00 Sales price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with built-in collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for installation of a separator of the 200 series - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused List price: €8,467.00 Sales price: €4,233.50 All prices are net, plus statutory VAT of 19%. PLEASE NOTE: The offer does not include relocation or transport costs for the machine. These can be offered and organised as an additional service if required. For further questions, please feel free to contact me directly at any time.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, nosilnost: 2.000 kg, Mostovno dvigalo DEMAG - M + PK10-N-F MACH-ID: 9360 Proizvajalec: DEMAG Ppsdpfxeyfd N Sj Aczjl Tip: M + PK10-N-F Leto izdelave: 1991 Motoriziran vrtljivi doseg 0° - 270° Nosilnost 2000 kg Visoka hitrost 4000 mm/min Nizka hitrost 10000 mm/min Priložene knjige / pregledne knjige Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljšem vedenju, kjer je bilo mogoče tudi od proizvajalca. Podatki so podani v dobri veri, vendar za točnost ne moremo jamčiti. Tako te informacije ne predstavljajo zavezujoče ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10 mm, nosilnost: 25.000 kg, DEMAG dvotirna vozična mačka z dvigalom P1600 Nosilnost 25.000 kg / 25 t Dvigalni motor 36/20 K6P Ppodpfx Acev Uvftjzjl Fini vhod FG 36 Prodaja 20 dvigal Vožnja mačke v 2 stopnjah Popolnoma delujoče Daleč pod novo ceno proizvajalca.

Leto izdelave: 2014, obratovalne ure: 100.657 h, Stanje: pripravljen za uporabo (rabljen), skupna masa: 30.000 kg, skupna višina: 3.000 mm, največja dolžina izdelka: 5.500 mm, Ta DEMAG Systec byla vyrobena v roce 2014. Jedná se o robustní hydraulický vstřikovací lis s uzavírací silou 6 500 kN a vstřikovací jednotkou o velikosti 2 300. S rozměry 5500x2600x3000 mm a hmotností přibližně 30 000 kg zpracovávala materiály jako ABS, PC a PP. Stroj je vybaven manipulačním systémem a dopravníkem. Pokud hledáte vysoce kvalitní vstřikovací lis, zvažte tuto DEMAG Systec, kterou nabízíme k prodeji. Pro více informací nás kontaktujte. • Uzavírací síla: 6500 kN • Velikost vstřikovací jednotky: 2300 • Rozteč sloupků: 1020 mm • Manipulační systém • Dopravník • Provozně PLC: 100 657 h • Provoz pohonu: 50 889 h • Provoz topení: 71 043 h • Počet cyklů: 4 942 086 Podpfx Acex Uqp Eozjpl • Připojený výkon: 197 kW • Proud: 298 A • Dříve zpracovávané materiály: ABS, PC, PP Rozměry Hloubka stroje: 2600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, delovna prostornina: 305 cm³, tlak vbrizgavanja: 2.050 letvica, injekcijska masa: 270 g, minimalna višina orodja: 275 mm, Demag IntElect 150/520-610 General Data Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Podpfx Ajxxrr Tsczepl Mould clamping system: 150/... Clamping force: 150 t Mould platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Maximum daylight between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic cylinder, standard L:D Three-piece ring non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Operating hours meter: 26,500 h - Increased maximum mould height (min. unchanged, max. increased) - Wear-resistant screw; bimetallic cylinder; standard L:D; screw diameter 45 mm - 3-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic core pulls on the moving platen, via separate hydraulic unit - Increased injection speed (300 mm/s) - Increased maximum mould height (min. unchanged, max. increased) Offer is for the injection moulding machine only