Del Acla nakup rabljenega (10.679)

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Hedpjxy Tmnsfx Ab Ejfd Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Leto izdelave: 1956, stanje: rabljeno, Format 540×720 mm (21×28″) Izsekovalni valj Kratkoročno na voljo Hfodpjyr H Htsfx Ab Eed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Zmogljivost: 14.000 pol na uro Format (cm): max.: 48 x 32 Linija sestoji iz: - 4 x dovajalna postaja - 2 x postaja za vstavljanje kartic z lepilno enoto (lahko se uporabljata tudi kot običajni postaji – zgornje vstavljanje) - 1 x dovajalnik ovitkov - 1 x kontrola dvojnega lista - 1 x spenjalna postaja s Hohner SB 50 glavami (2+2) - 1 x trosmerni rezalnik s sredinskim rezom Hfsdexmhrfopfx Ab Eed - 1 x križni zlagalnik RIMA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 013910086, CTP SYSTEM HB TOPSETTER (52 & 74 - SOFTWARE LICENSE FOR BOTH FORMATS) Year: from 2001 Counter: 115,778 plates Format (cm): 52 & 74 with software license for both formats Equipment / additional information: - with integrated plate punch Hfsdpfx Absimbp Re Esd - with washout unit AZURA C85 (serial no.: 92700-0307) - plate stacker, advand PST 48 (serial no.: M211348121L) - software, complete RIP (6 years old) Dismantling, packaging, and securing of the machine (insurance of the machine during transport) will be carried out by the manufacturer / Heidelberg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 701 235, Counter: 54,356,348 Format (cm): 36x52 Hfjdpovcxxxjfx Ab Ejd Dampening unit: Stenz dampening system

Leto izdelave: 1982, stanje: zelo dobro (rabljeno), številka stroja/vozila: 676411N, WITH N&P UNIT (numbering and perforating unit) Counter (millions): 45 Hedpfoivz E Tjx Ab Eefd Format (cm): 32x46 Dampening system: Varn Kompac III Equipment / further details: with N&P (numbering and perforating unit) Bacher control 5000

Stanje: zelo dobro (rabljeno), Leto izdelave: 1955, številka stroja/vozila: 104 678 N, Format: A4 Število barv: 1 Hjdsw Rb U Nepfx Ab Ejfd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, številka stroja/vozila: T171 074 N, S TOPLO FOLIJSKO TISKAJEM Format: A4 Hsdjw Rcrpjpfx Ab Eefd Število barv: 1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: PJ000400, Type: PJ.003.0000 Plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / further details: G & J stacker Software, RIP, PC The machine is equipped with 1 laser head containing 64 diodes. Hfjdpfx Abspahr Ae Esd Dismantling, packaging of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Heidelberg.

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), številka stroja/vozila: 700571/99-280108, Maximum working width (mm): 660 Hfodpfx Absixqb Se Esd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 023910293, Output: 20 plates/hour Counter reading: 69,068 plates Hfedpjrigkhefx Ab Eed Format (cm): 50x70 Equipment / further details: - Includes server with Trueflow software - Integrated plate punch - Equipped with 40 laser diodes (individually replaceable) Dismantling, packaging of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Heidelberg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: GS000506, Števec: 26‘795‘055 // Zmogljivost: 13.000 pol na uro Format: Največja velikost pol: 370 x 520 mm // Najmanjša: 105 x 145 mm Največja tiskovna površina: 360 x 520 mm Debelina: največ 0,4 mm Hsdpjvw Ai Rofx Ab Eefd Vlažilna enota: Alcolor filmsko vlažilno delo z hladilno napravo Baldwin BC 713 EF Puder naprava: Alphatronic 200 Oprema / dodatne informacije Ultrazvočni nadzor dvojnega pola Heidelbergova naprava za vpenjanje plošč EasyPlate z avtomatskim pozicioniranjem valja za hitro menjavo plošč z enim orodjem. Kavčukasti valj z osrednjim zateznim vijakom za napenjanje sprednjega in zadnjega roba Avtomatska čistilna naprava za kavčuk in tiskarski valj (za običajne barve), primerna za konvencionalna in rastlinska čistila, programsko upravljana preko upravljalne plošče.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), številka stroja/vozila: FR.EAA0-00271, Pr. Nr.: 1224418281 Hodpfx Abehrnbco Eofd

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), številka stroja/vozila: 458/08 (C.2.144.1301/02), Maximum format: B1 Voltage: 100–240V // 300–330VA // 50/60Hz Hsdpfx Absfh Dp Te Eefd Further MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available from our stock. ON REQUEST.

Stanje: zelo dobro (rabljeno), Format (cm): 32x46 Hfedpfxoh Eikme Ab Eod All associated tools, creasing and perforating tools, as well as the corresponding holders, are included with the unit. (see pictures)

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), številka stroja/vozila: 664937N, Counter (million): 42 Hodpfx Ajgfb E Rsb Esfd Format (cm): 32x46 Dampening system: Varn Kompac III Equipment / further information: with numbering and perforating unit (N&P)

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Cette ligne de cloueuses à palettes DELTA a été fabriquée en 2008. Elle dispose d’un équipement complet comprenant un cloueur au sol, une cloueuse avec alimentation pneumatique et contrôle des clous, des unités de marquage, de retournement à 90° et 180°, une scie d’angle et une installation d’empilage, complétées par un convoyeur. Envisagez l’achat de cette ligne de cloueuses à palettes DELTA. Contactez-nous pour plus d’informations. Hfedpfx Aeyaiyrjb Esd Avantages de la machine Avantages techniques de la machine • Cloueur au sol / cloueuse à palettes : avec alimentation pneumatique pour traverses, gabarit pour la pose des planches supérieures, contrôle de l’alimentation des clous / unité de chargement pour le marquage des palettes / unité de rotation de palettes à 90° / scie d’angle pour palettes / unité de retournement de palettes à 180° / installation d’empilage de palettes / convoyeur pour palettes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 2.011 h, potovalna razdalja osi X: 900 mm, pomik osi Y: 850 mm, pomik po osi Z: 700 mm, skupna širina: 3.062 mm, dolžina mize: 3.893 mm, skupna masa: 11.000 kg, največja hitrost vretena: 14.000 obr/min, moč vretenovega motorja: 22.000 W, število osi: 5, This 5-axis HEDELIUS Acura 85 was manufactured in 2021. It features an impressive X-axis travel of 900 mm, Y-axis travel of 850 mm, and Z-axis travel of 700 mm. The machine is equipped with a double-supported rotary-swivel table with dimensions Ø 850 × 750 mm and a maximum clamping weight of 1000 kg. If you are looking for high-quality metalworking capabilities, consider the vertical machining center HEDELIUS Acura 85, which we offer for sale. Contact us for further details. • Rotary/swivel table: Double-supported rotary-swivel table • Rotary table dimensions: Ø 850 × 750 mm • Interference circle diameter: Ø 900 mm • Spindle distance H/V: 135 / 120 mm • T-slots: 18 mm / 7 • Distance between T-slots: 100 mm • Swivel range: +30° to -115° • Swivel speed (90°): 1.2 sec Hsdeyrck Ujpfx Ab Esfd • Swivel accuracy: < ±10″ • Indexing accuracy: < ±6″ • Maximum clamping weight: 1000 kg • Tool holder options: SK40 / BT40 / HSK-A63 • Drawbar force: 8 / 22 kN • Maximum drive power: 22 kW • Maximum torque: 117 Nm • Machining performance (ST60 / E335): 400 cm³/min • Maximum drilling diameter: Ø 40 mm • Maximum thread cutting: M24 • Feed rate X/Y/Z: 40 / 40 / 40 m/min • Maximum feed force: 23,000 N • Tool magazine capacity: 80 / 150 / 195 / 260 / 344 tools • Maximum tool diameter: 75 / 100 / 125 mm • Maximum tool length: 330 / 390 mm • Chip-to-chip tool change time: approx. 9.7 sec • Positioning accuracy X/Y/Z: A = 8 µm • Spindle hours: 2,011 h Technical Specification Taper Size BT 40

Stanje: delavnici obnovljeno (rabljeno), Univerzalni orodjarski rezkalni stroj Znamka: harich (DECKEL) Model: B (FP 2) Aktiv Prenovljen z oznako CE Geometrijska prevzemna s preskusnim protokolom Z garancijo Dodatna oprema: - 3-osni aktivni digitalni prikazovalnik Heidenhain Positip 8016 - Fiksna miza ali univerzalna miza - Vertikalna rezkalna glava SK 40 - Centralno ročno mazanje Hjdpfxjx A T Eve Ab Eefd - Hladilna naprava - Navodila za uporabo CE in varnostna oprema: - Nova električna napeljava stroja z električno omarico - Elektronsko nadzorovan pokrov na vertikalni rezkalni glavi - Zaščitni pokrov vretena z električnim varovanjem - Pogonski motor z zavorno funkcijo - Upravljalna plošča z gumbom za nujni izklop, sprostitev, zagon in ustavitev, potenciometer za regulacijo pomika - Nova dokumentacija za stroj in električno omarico - Izjava o skladnosti CE

Stanje: rabljeno, številka stroja/vozila: 008388, Delovno območje os X: 3086 mm Delovno območje os Y: 2185 mm Hsdpfxsyngzvo Ab Eofd Delovna površina: nestinška miza Moč glavnega vretena: 15 kW Število krmiljenih osi: 4 osi Število vrtalnih glav: 18 Število mest za orodje: 20

Stanje: dober (rabljeno), Leto izdelave: 2000, Ponudba sestavljena iz: Heidelberg Speedmaster SM102-2P, letnik 2000, število odtisov 202 milijonov, CP2000 Center, Autoplate, Technotrans, nove valji v 01/26. Hfedpfjymgdzex Ab Ejd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Heidelberg Speedmaster SM 102-2-P Leto: 2007 Barve: 2 Obračalna enota: 1+1 / 2+0 Maksimalni format: 74 × 102 cm CP2000 Center z upravljanjem barvnih con Alcolor vlažilni sistem Ročna menjava plošč Technotrans CombiStar Hedpoyrnkmsfx Ab Esfd Preset Plus podajalnik Avtomatsko čiščenje barvnih valjev Avtomatsko čiščenje gumijaste odeje Stroj hlajen z zrakom WashStar Preset Plus izhod Visoko zlaganje izhodnih pol Medkomunikacijski sistem na izhodu Eltex antistatična naprava Grafix Duo Plus XL CAN posipalnik CleanStar X-Rite

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Na voljo je rezervoar iz nerjavečega jekla z integriranim mešalom. Umerjanje: 1996, Prostornina: 2700 l, Tlak: brez tlaka, Material: verjetno V2A, Iztok na dnu: DN50 mlečna cev. Ogled na lokaciji je možen. Hjdpeyuyvgofx Ab Eofd

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) Hedpfx Abevvi Nzs Ejfd The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure Hfjdpfxsvvi N Is Ab Eod The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...