Deckel Fp 6 nakup rabljenega (676)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication Kodpfx Ahsxu E R Is Ajfa >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: rabljeno, Universalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 RPM Kfedpfx Ajxyymbsh Aea Glava nagibna vodoravno Vretenov motor: 2 hitrosti Motor: 1,5 kW Pomiki: X - Z avtomatski / Y ročni Dobavljeno brez mize, le z eno 4-čeljustno koncentrično glavo Ø 140 mm Napetost: 380 V Širina: 1200 mm Globina: 1200 mm Skupna višina: 1600 mm Teža: približno 900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Kjdpfxoxyhmvs Ah Aefa

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC universal milling machine Manufacturer: DECKEL, Model: FP5NC, Year: 1986, Control: DIALOG 4 Kedpfoxr A A Asx Ah Aofa Travel distances: X 710 mm / Y 600 mm / Z 500 mm Clamping table: 1000 mm x 550 mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Machine in stock.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Kodoxyk Upopfx Ah Asfa

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 294, x-travel: 400 mm y-travel: 190 mm z-travel: 310 mm Clamping surface of table: 280 x 750 mm Vertical spindle overhang: 115–575 mm Number of feed rates: 16 Feed range: 11.2–355 mm/min Tool holder: SK 40 Number of spindle speeds: 16 Speed range: 56–1800 rpm Total power requirement: 2.2 kW Space requirement approx.: 1550 x 1250 x 2000 mm Machine weight approx.: 1200 kg 1 used universal tool milling machine including ACURITE digital readout Equipped as follows: - Vertical milling head - Fixed angle table - Separate rotary table - Micrometers - Various milling cutters Kfsdpfx Ahsvcf Hpo Aoa - Various tool holders Manufacturer’s description: - All operating elements located on one side with movable control panel - Additional manual traverse adjustment extends the machine’s working area, even beyond the table surface - Fine graduation of spindle speed and feed gearbox, step ratio 1.25

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system Kjdpfxoxu E I Ho Ah Aefa >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: rabljeno, Univerzalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Kfjdpfx Aexxpp Njh Aja Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 obr/min Velikost mize: 600 x 210 mm Glava nagibna horizontalno Ravna delovna miza Vreteniški motor: 2 hitrosti Motor: 1,3 kW Pomiki: X - Z avtomatsko / Y ročno Napetost: 380 V Širina: 1200 mm Globina z električno omarico: 1200 mm Višina: 1600 mm Teža: pribl. 900 kg

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP1 orodjarska rezkalna naprava, fiksna kotna miza, SK 40 vpenjalni konus vretena. Zavora vretena, dodatki: nasprotni nosilec, različne vpenjalne puše. Dobro delujoče stanje. Po dogovoru možno prikazati pod napetostjo. Kfjdpoxw T Efefx Ah Asa

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Spindle taper (vertical/horizontal): SK 40/SK 40 Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Kodpfx Aou U E T Ish Ajfa Heidenhain 3-axis digital readout *

Stanje: rabljeno, Leto izdelave: 1983, Technical details: X-travel: 560 mm Y-travel: 500 mm Kfjdewgdz Eepfx Ah Aja Z-travel: 450 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Control: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight approx. 0.73 t Space requirements approx. LxWxH 1200x1100x1600 mm Kfjdpfsxnniaex Ah Aoa

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2300-0053, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, dolžina mize: 1.000 mm, širina mize: 520 mm, skupna višina: 1.900 mm, skupna dolžina: 1.500 mm, skupna širina: 1.800 mm, največja hitrost vrtenja: 200 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 1.000 kg, - Number of table slots: 6 EQUIPMENT: - Swiveling table - Three-axis digital readout (Heidenhain) - New bellows Kjdpfx Ahswdn A Ue Aefa - New handwheels

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis milling machine, equipped with retrofitted safety features. These newer models come with central lubrication, an electric coolant pump, and a brake motor as standard. Additionally, thanks to the Harting connector, the control cabinet can be disconnected from the machine in no time. The connection of all safety components to the control cabinet is also implemented with this connector type, ensuring that handling remains user-friendly. We provide a 12-month warranty on all retrofitted safety devices, which we can supply for any machine model! The electronic spindle guard is adjustable across multiple axes and is designed to prevent access to the working spindle while also protecting against hazards such as flying chips, coolant, etc. The electronic spindle safety cap is intended to prevent interference with the rotating spindle stub, including the tool clamping area. Kfedpfx Aheuw Uu Ne Aea Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: fixed angle table Travels: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features and accessories: coolant device, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle safety cap Our service promise to you: - We are a certified master engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories, such as additional safety equipment - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Ksdpfx Ahexwunze Aofa

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Hod X/Y/Z: 560mm/500mm/450mm, vpenjanje orodja: SK40, število obratov: 4000o/min, pomik: 3,6m/min, hitri pomik: 4m/min, dimenzije mize X/Y: 530mm/900mm, največja obremenitev mize: 450kg. Dimenzije stroja X/Y/Z: 2350mm/2200mm/2000mm, teža: pribl. 2200kg, krmilje: Deckel Contour 2. Ogled na lokaciji je možen. Kodpjxvddvjfx Ah Aofa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm Ksdpfjxghtvjx Ah Asfa >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno), DECKEL FP2A CNC milling machine Ksdpfxerfaq Ro Ah Aefa with Contour 3 control and machine vice. X travel: 300 mm Y travel: 300 mm Z travel: 400 mm Spindle taper: ISO 40 Spindle speeds: 40 – 4000 rpm Table size: 620 x 390 mm Feed rates, stepless: 4 – 4000 mm/min Table load capacity: 0.45 t Total power requirement: kW Machine weight: approx. 1.6 t Operating voltage: 380 V Footprint: 1.9 x 2.0 m Control cabinet: 1.90 x 0.75 x 1.05 m Space requirement: approx. 2.9 x 2.7 x 2.0 m

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 4038, potovalna razdalja osi X: 290 mm, pomik osi Y: 150 mm, pomik po osi Z: 330 mm, montažni premer: 40 mm, dolžina mize: 600 mm, širina mize: 210 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 700 kg, CONDITION & NOTES: Kjdpfx Aswxpxmoh Aefa - This is an active path-controlled tool milling machine

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are offering milling machines of the Deckel FP3 type. The machine is at least technically inspected in our workshop and is therefore fully operational. We would be very pleased to receive your inquiry! Delivery time: upon request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Table clamping surface: 800x420mm Spindle speed range: 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Feed axes: X, Y, Z Feed rate: 10–500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: available on request Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - If desired, we can completely or partially overhaul the selected machine - You are free to choose the paint color of the selected machine Kfsdpfxeq H Eabj Ah Aoa - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Kfedsumcmqepfx Ah Aea

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2309-0121 / 2779 Generalüberholt, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 25 obr/min, vrtljajska hitrost (min.): 2.500 obr/min, skupna masa: 3.000 kg, Deckel FP3-LV tip 2309 z aktivnim digitalnim prikazovalnikom Ta oldtimer iz leta 1978 je bil leta 2008 temeljito obnovljen pri FPS in postavljen v stanje novega stroja. Deckel FP 3LV - V pomeni podaljšan pomik v osi X - s 3-osnim digitalnim prikazovalnikom Heidenhain - s brezstopenjsko nastavljivim pomikom 5–500 mm/min - tog kotni delovni stroj z vpenjalno površino 550 x 1400 mm - hitri pomik 1500 mm/min + počasni pomik 4 mm/min3 Kfjdpfexnyfyjx Ah Aea - notranji stožčasti vpenjalni priključek SK40 z Deckel navojem za žage S20x2

Stanje: dober (rabljeno), Leto izdelave: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Long travel milling head. Accessories include various collets and cutter arbors, counterholder. In good, fully functional condition. Can be demonstrated under power by arrangement. Kfjdpfxeumclaj Ah Aea

Leto izdelave: 1976, Stanje: dober (rabljeno), Deckel FP1 tool milling machine, equipped with 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table and SK 40 spindle taper, both vertical and horizontal. Accessories include various collets and arbor holders, steady rest, and more. The machine is in good, ready-to-use condition; however, the paintwork shows signs of wear. Can be demonstrated under power by prior arrangement. Ksdpfxorhzcue Ah Ajfa

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Ksdpfxsxu Uvte Ah Aofa