Deckel Fp 42 nakup rabljenega (677)

Leto izdelave: 1988, stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm Heidenhain digital readout for 3 axes Spindle taper SK 40 Spindle speeds 50 - 2500 rpm Table size 650 x 375 mm Machine weight approx. 1.5 t Bodsqpl Uqjpfx Aiqswu Dimensions approx. ... mm Universal rotary-tilt-swivel table Centralized lubrication Coolant system

Stanje: rabljeno, X-hod 560 mm y-hod 500 mm z-hod 410 mm Krmilnik Heidenhain TNC 355 Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru pod napetostjo tudi ogledati. Bwedpfx Aiszq Hllsqju Pribor, prikazana orodja in vpenjalne naprave so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje!

Stanje: novo, Višina konic // mm Skupna potrebna moč / kW Bwsdpfx Aijzcgfqsqju Teža stroja pribl. / t Potrebni prostor pribl. / m Delilna glava za Deckel FP1 / FP2 Stanje: NOVO

Stanje: rabljeno, Leto izdelave: 1987, FRIDRICH DECKEL, VISOKONATANČNI STROJ ZA OBSTRANJEVANJE MATERIALA MODEL: FP4M LETNIK: približno 1987 DIGITALNI OBRATOMER HEIDENHAIN BREZHIBNO STANJE Bedpfxjzv Eg Ss Aiqowu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Bwodpfx Aijxghtvjqsu Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed – Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 1990 Machine no.: 2102-5046 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300/160/340 mm - Vertical milling head adjustable on spindle carrier by 100mm - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight: approx. 800 kg Accessories and Equipment: - 3-Axis Heidenhain TNC 113 Digital Readout - Coolant system - Machine lamp - Operating manual & spare parts list About the machine: Bwedpfxozbb E Ao Aiqeu Offered here is a universal milling machine Deckel FP1, CE compliant and in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available on them. A major advantage is the active 3-axis digital readout. With the Heidenhain TNC 113 control, you can input dimensions and let the machine automatically travel to those positions. This FP1 was used in a training workshop and was only operated occasionally. Oil has been changed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes working easier and more precise. Take the opportunity to inspect and test the machine on site under power.

Stanje: rabljeno, Utorjalna glava, glava za strojno obdelavo (freza) DECKEL, tip FP 1 Št. serije: 21948 Širina vodila z repasto povezavo: pribl. 74–88 mm Višina vodila z repasto povezavo: pribl. 14,5 mm Dolžina vodila z repasto povezavo: 285 mm Razdalja od sprednjega roba vodila z repasto povezavo do sredine zobnika: pribl. 200 mm Hod: maks. 80 mm Število hodov: maks. 475 dvojnih hodov/min Vpenjalno orodje: štirikoten, 16 x 16 mm, z vpenjalno ploščo - Velikost hoda je nastavljiva s pomočjo eksцентриčne nastavitve - Pogon iz strojnega menjalnika, znotraj vodila z repasto povezavo (kot pri običajni vertikalni glavi) - Ta utorjalna glava se vstavi v vodilo z repasto povezavo namesto običajne vertikalne glave za obdelavo (freza) (Montaža na mesto vertikalne glave za obdelavo, glave za frezalni stroj) - Pogonski zobnik v utorjalni glavi, 39 zob, širina zobnika 15 mm, predvidoma 15° vstopni kot - Utorjalno glavo je mogoče vrteti za 360° na prirobnični plošči, lestvica v stopinjah +/- 35° Bsdpfx Asznn Hreiqswu - Majhna izbočina na ohišju Teža: 28,5 kg DECKEL FP1 ima vstopni kot 15° na pogonskem zobniku. DECKEL FP2 + FP3 - imata vstopni kot 20° na pogonskem zobniku.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Bsdpfou Racrsx Aiqowu Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Bwedpfsuclbzsx Aiqsu

Stanje: rabljeno, Leto izdelave: 1982, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Infinitely variable feeds: 5–500 mm/min Rapid traverse: 1,200 mm/min Spindle speeds: 40 – 2,000 rpm Tool holder: Standard taper 40 Table length: 600 mm Table width: 120 mm Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Bedpfx Asvvnfusiqswu Machine weight approx.: 0.75 t Space required approx.: 1.8 x 1.5 x 1.8 m DESCRIPTION Machine includes: Active 3-axis digital readout HEIDENHAIN Documentation (Measuring) jaws Vice, etc.

Stanje: rabljeno, Leto izdelave: 1978, X-travel 300 mm y-travel 160 mm Bjdpfxowl N R Ns Aiqowu z-travel 340 mm Clamping surface of table 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, digital readout on 3 axes HEIDENHAIN, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), Deckel milling machine FP 2A with Dialog 12 control + vise Bedpefgmbdjfx Aiqewu

Stanje: novo, Leto izdelave: 2026, Completely overhauled, as-new condition machine, upgraded to the legally mandated safety standard “State of the Art” in accordance with the Occupational Health and Safety Regulation of the Professional Associations. Control Cabinet Electronics: Installation of a new CE-compliant control cabinet in line with the latest statutory requirements of the trade associations: BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally, the complete machine can be delivered in CE configuration. A CE Declaration of Conformity is issued for this machine, making FPS Werkzeugmaschinen GmbH the manufacturer of record. This means the machine fully complies with the requirements of the German Ordinance on Industrial Safety and Health (BetrSichV). The year of manufacture is aligned with the machine’s delivery date. Certified to: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control: 3-axis FPS Aktiv digital position display Spindle speed: 50 – 2,500 rpm, geometrically graduated direct-drive gearbox with 18 speed steps for maximum torque and milling performance Feed: 6.3 to 630 mm/min, infinitely variable Rapid traverse: 1.3 m/min Quill: Extendable vertical quill, 60 mm SK40 with M16 drawbar thread (optional: with DECKEL saw thread S20 x 2) Extendable horizontal quill approx. 100 mm Axes travel: X/Y/Z 500/400/400 mm Table: Fixed angle table 800 x 460 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options: • Z-axis bellows • Chip tray Bwedpoh R S Tcjfx Aiqou • Machine lamp • Centralized lubrication • Universal table • Rotary table • Shaping head • Dividing head • Steady rest • etc.

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Bsdpfetp Nyfjx Aiqjwu

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm Bsdpfxewwwr Es Aiqowu y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1968, potovalna razdalja osi X: 800 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, hod vretena: 80 mm, skupna dolžina: 1.000 mm, širina mize: 520 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 2.500 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 2.000 kg, Ponujamo obnovljen rezkalni stroj DECKEL FP2LB, letnik 1968. Proizvajalec: DECKEL Model: FP2LB Letnik: 1968 Stanje: obnovljen Tip stroja: rezkalni stroj Bwedpfx Aijx Sdxzeqju Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje 3 osi, aktivno krmiljenje poti Heidenhain TNC 123 Število obratov 40 - 2000 min⁻¹, geometrijsko stopnjeni direktni pogon s 16 prestavami za največji navor / rezkalno moč Pomik 5 do 500 mm/min, brezstopenjsko nastavljiv Hitri pomik 1,2 m/min Izvlečna puša, vertikalni hod 60 mm, SK40, privijalni navoj M16 Osi X/Y/Z: 300/160/340 mm Nagibna miza 600 x 210 mm, največja obremenitev 200 kg Bwjdeyg I Nfjpfx Aiqeu

Stanje: novo, Leto izdelave: 2026, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Bwedeh Sptnepfx Aiqeu Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Deckel FP5CC Fräsmaschine Guter Betriebszustand. Bitte sehen Sie sich auch unsere weiteren Angebote an. Bedpfx Aisrzu Stjqowu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Bwjdpfx Aisu T D Nreqsu >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: Bwjdpfxjxu E I Hj Aiqsu For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Bwsdpfx Aijuvgnqeqsu

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Bodsumcmqjpfx Aiqowu

Stanje: dober (rabljeno), Leto izdelave: 1988, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, S20x2 spindle mount. Good, ready-to-use condition; can be demonstrated under power by prior arrangement. Bwodpfjrk Aaaex Aiqju

Stanje: dober (rabljeno), Vpenjalna površina fiksne kotne mize: 195 x 605 mm Avtomatski in ročni vzdolžni/navpični pomik mize: 290/300 / 330/340 mm Ročni prečni pomik vretenaste glave: 150 mm Bedjyvgf Ropfx Aiqswu Vpenjalo vretena: ISA 40 16 hitrosti vretena: 40 - 2000 obr/min 16 pomikov: 10 - 500 mm/min Pogon vretena: 380 V, 1/1,4 kW Teža ca.: 660 kg Potrebna postavitvena površina: 1200 x 900 x 1570 mm