Rezkalni stroj - univerzalni

DECKEL FP 4 M

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal tool milling machine Make: DECKEL Dcsdpfjlfc U Dsx Afqsr Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant unit - Operating manual Used as seen The machine corresponds technically to the state of the art of its year of manufacture.

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Y-hod 300 mm Z-hod 400 mm Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Dcjdpewwwqhsfx Afqor Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme

Stanje: dober (rabljeno), Leto izdelave: 1987, Deckel FP4M, orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazom, fiksna miza, SK 40 vpenjalni vretena, dodatki: različne vpenjalne tule in stebla za rezkala. V dobrem delovnem stanju, pripravljen za uporabo. Po dogovoru je možen preizkus pod napetostjo. Djdpjxmi I Iofx Afqocr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min Dcjdpfx Afexctyajqsr >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Special terms available for new machines ordered and commissioned within this year! ==> Currently, a fully refurbished used machine is also available following overhauling. Please enquire separately for details. ==> ==> Information for manufacturing companies and dealers with in-house production: Drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a 9-ton traction force variant) for the broaching machine can be acquired from us if required. Please contact us if interested. ==> Our new machines are custom-built to order. Fast production and short delivery times available. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and exceptionally robust vertical broaching machine for long-term operation. Dcedpfsuqbnhex Afqjr Broaching tools (special needles for internal splines, etc.) and accessories available on request. Please inquire separately for these items. All broaching tools and broach holders from other manufacturers can be used with our broaching machine! Complete production and assembly are carried out at our facility in Germany. Short lead times by arrangement. We also supply spare and wear parts (spindles, spindle nuts, motors, gears, and all other necessary components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The primary application is in the production of keyways from 3–28 mm and profiles of similar dimensions. The compact machine with a small footprint can be used successfully in small, medium, and large operations. The low price justifies the investment even for small production runs and one-off items. Drive via a pole-changing geared brake motor. The maintenance-free twin spindle drive ensures quiet operation, a central pulling point, and constant cutting performance. The open tool table allows for easy placement of large workpieces. In most cases, workpieces do not need to be tightly clamped. Stroke adjustment is made using adjustable end switches with stroke limitation. For short hubs/workpieces, several items can be stacked for processing. Broaching needles, mandrels, and spare parts available at attractive terms upon request. Technical Specifications: Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min and 6 m/min (Optional: stepless speed adjustment from 0 m/min to 6 m/min via advanced electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Outside RAL 7035/7036/7016, Inside RAL 3000 or customized Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and bears the CE mark.

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Dcjdpsxcldksfx Afqsr Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, dolžina mize: 790 mm, širina mize: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Dodpfxewffyms Afqecr Spindle speeds 50 - 2,500 rpm

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 X-hod 850 mm Y-hod 550 mm Dcjdpfx Afod N Smhjqsr Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained Deckel FP4M (K) active milling machine featuring a rotary-tilt-swivel table and 4-axis digital readout. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Available immediately Machine No.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis Heidenhain digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we offer a complete or partial overhaul of the selected machine - You are free to choose the paint color of your selected machine Dsdpsvvtlgefx Afqocr - Upon request, you can order additional accessories such as tools directly - If desired, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation as well

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pomik X: 500 mm Pomik Y: 400 mm Pomik Z: 400 mm Dcsdpfew I A D Tox Afqer Število obratov: 50 – 2500 obr/min Pogonska moč: 2,7 / 4,4 kW Vpenjalo orodja: SK 40 s hidravličnim vpenjalcem DIN 2080 Vrsta mize: fiksna ali nagibna miza Vpenjalna površina mize: 650 x 380 mm Teža: 1600 kg Dimenzije (z varnostnim območjem): pribl. 2500 x 2700 x 1950 mm Barva: RAL 6011 resedino zelena Digitalni prikaz: 3-osi HEIDENHAIN Oprema: centralno mazanje, KSS-kad, dodatna oprema na zahtevo

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: Dedpfx Afjnfvx Noqjcr The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paintwork, CE Compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 Dcodpfx Aew N Sfvefqjr >> Fixed angle table (newly planed) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle head by 150 mm >> Vertical quill and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system: M16 >> Weight approx. 1,500 kg Equipment and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: For sale is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, with minimal backlash in the cranks, and all spindles move smoothly and evenly. Even at max. RPM, the milling machine runs quietly. Rapid traverse in all axes, bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Dcsdpfxsu Tuk He Afqsr Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, Leto izdelave: 1970, x-travel: 900 mm y-travel: 250 mm z-travel: 370 mm Table clamping surface: 1525 x 325 mm Dcedpfx Afjcxxqrjqsr Total power requirement: 9.85 kW Machine weight approx.: 3.1 t Space requirement approx.: 2.0 x 2.5 x 1.7 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: 1987 Machine no.: 2203-2772 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier: 150 mm >> Vertical and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Drawbar system: M16 >> Weight approx. 1500 kg Equipment and Accessories: Dcsdpfsvg Ewcex Afqer >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP4M in very good condition. The machine has minimal backlash, and all feed screws can be moved smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and more precise. You are welcome to inspect and test the machine under power on site.