Deckel Fp 4 Ma nakup rabljenega (672)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA, including 2 accessory cabinets, from university environment, in excellent condition Technical Data: >> Machine No. 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting and rotating table >> Spindle speeds: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel path X/Y/Z: 500/300/400 mm >> Equipment: vertical and horizontal spindle >> Extensible vertical and horizontal quill – SK-40 >> Drawbar system S20x2 >> Weight: approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Centralized lubrication Iisdpfxsxxzl No Ah Ask 2 accessory cabinets including: - Collets - Horizontal and vertical tool holders - Clamping tool - Dividing head with 3-jaw chuck - Machine vice - Counter-support - Faceplate - Additional small rotary/tilting/turning table - Rotary table - Counter-support - Machine vice and much more About the machine: Offered for sale is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets including a comprehensive set of accessories. Previously located at a university. Oil change performed. Mechanically and electrically tested. The digital readout allows for easier and more precise work. Take the opportunity to inspect and test-run the Deckel on site under power.

Stanje: rabljeno, Universalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 RPM Glava nagibna vodoravno Vretenov motor: 2 hitrosti Motor: 1,5 kW Pomiki: X - Z avtomatski / Y ročni Dobavljeno brez mize, le z eno 4-čeljustno koncentrično glavo Ø 140 mm Napetost: 380 V Širina: 1200 mm Globina: 1200 mm Iisdpexyymbsfx Ah Aok Skupna višina: 1600 mm Teža: približno 900 kg

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC universal milling machine Manufacturer: DECKEL, Model: FP5NC, Year: 1986, Control: DIALOG 4 Isdjxr A A Aepfx Ah Aeik Travel distances: X 710 mm / Y 600 mm / Z 500 mm Clamping table: 1000 mm x 550 mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Machine in stock.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Isdpfx Asxyk Upsh Ajik

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP1 orodjarska rezkalna naprava, fiksna kotna miza, SK 40 vpenjalni konus vretena. Zavora vretena, dodatki: nasprotni nosilec, različne vpenjalne puše. Dobro delujoče stanje. Po dogovoru možno prikazati pod napetostjo. Iisdpexw T Efsfx Ah Ask

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 294, x-travel: 400 mm y-travel: 190 mm z-travel: 310 mm Clamping surface of table: 280 x 750 mm Vertical spindle overhang: 115–575 mm Number of feed rates: 16 Feed range: 11.2–355 mm/min Tool holder: SK 40 Number of spindle speeds: 16 Speed range: 56–1800 rpm Total power requirement: 2.2 kW Space requirement approx.: 1550 x 1250 x 2000 mm Machine weight approx.: 1200 kg 1 used universal tool milling machine including ACURITE digital readout Equipped as follows: - Vertical milling head - Fixed angle table - Separate rotary table Iiedpovcf Hpofx Ah Ask - Micrometers - Various milling cutters - Various tool holders Manufacturer’s description: - All operating elements located on one side with movable control panel - Additional manual traverse adjustment extends the machine’s working area, even beyond the table surface - Fine graduation of spindle speed and feed gearbox, step ratio 1.25

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: Iodpfx Ahsu Um Erj Ajik >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: rabljeno, Univerzalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Iodpoxxpp Nsfx Ah Aeik Hitrost vretena: od 40 do 2000 obr/min Velikost mize: 600 x 210 mm Glava nagibna horizontalno Ravna delovna miza Vreteniški motor: 2 hitrosti Motor: 1,3 kW Pomiki: X - Z avtomatsko / Y ročno Napetost: 380 V Širina: 1200 mm Globina z električno omarico: 1200 mm Višina: 1600 mm Teža: pribl. 900 kg

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Spindle taper (vertical/horizontal): SK 40/SK 40 Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Iedpfx Aju U E T Ieh Aoik Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Stanje: rabljeno, Leto izdelave: 1983, Technical details: X-travel: 560 mm Ijdpswgdz Eofx Ah Aoik Y-travel: 500 mm Z-travel: 450 mm

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Iiodpfxsxwunze Ah Aek

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Control: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight approx. 0.73 t Space requirements approx. LxWxH 1200x1100x1600 mm Isdpfsxnniaox Ah Aoik

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: Iodpfx Ahstwlwzj Aeik >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Hod X/Y/Z: 560mm/500mm/450mm, vpenjanje orodja: SK40, število obratov: 4000o/min, pomik: 3,6m/min, hitri pomik: 4m/min, dimenzije mize X/Y: 530mm/900mm, največja obremenitev mize: 450kg. Dimenzije stroja X/Y/Z: 2350mm/2200mm/2000mm, teža: pribl. 2200kg, krmilje: Deckel Contour 2. Ogled na lokaciji je možen. Iodpexvddvofx Ah Aoik

Stanje: dober (rabljeno), DECKEL FP2A CNC milling machine Iisdpfx Ahsrfaq Ro Ajk with Contour 3 control and machine vice. X travel: 300 mm Y travel: 300 mm Z travel: 400 mm Spindle taper: ISO 40 Spindle speeds: 40 – 4000 rpm Table size: 620 x 390 mm Feed rates, stepless: 4 – 4000 mm/min Table load capacity: 0.45 t Total power requirement: kW Machine weight: approx. 1.6 t Operating voltage: 380 V Footprint: 1.9 x 2.0 m Control cabinet: 1.90 x 0.75 x 1.05 m Space requirement: approx. 2.9 x 2.7 x 2.0 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2309-0121 / 2779 Generalüberholt, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 25 obr/min, vrtljajska hitrost (min.): 2.500 obr/min, skupna masa: 3.000 kg, Deckel FP3-LV tip 2309 z aktivnim digitalnim prikazovalnikom Ta oldtimer iz leta 1978 je bil leta 2008 temeljito obnovljen pri FPS in postavljen v stanje novega stroja. Iisdsxnyfyopfx Ah Aok Deckel FP 3LV - V pomeni podaljšan pomik v osi X - s 3-osnim digitalnim prikazovalnikom Heidenhain - s brezstopenjsko nastavljivim pomikom 5–500 mm/min - tog kotni delovni stroj z vpenjalno površino 550 x 1400 mm - hitri pomik 1500 mm/min + počasni pomik 4 mm/min3 - notranji stožčasti vpenjalni priključek SK40 z Deckel navojem za žage S20x2

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Isdpeumcmqefx Ah Aoik

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Technical Data: • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW Iisdpfx Asu I Rm Nsh Ask • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Long travel milling head. Accessories include various collets and cutter arbors, counterholder. In good, fully functional condition. Can be demonstrated under power by arrangement. Iiedpeumclasfx Ah Aek

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm Isdpjxctyajfx Ah Aoik >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Leto izdelave: 1976, Stanje: dober (rabljeno), Deckel FP1 tool milling machine, equipped with 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table and SK 40 spindle taper, both vertical and horizontal. Accessories include various collets and arbor holders, steady rest, and more. The machine is in good, ready-to-use condition; however, the paintwork shows signs of wear. Can be demonstrated under power by prior arrangement. Iiedpfsrhzcusx Ah Aek

Leto izdelave: 1974, Stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Iedpfxjq A Icqj Ah Asik

Leto izdelave: 1975, Stanje: dober (rabljeno), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 thread. In good, operational condition. Can be demonstrated under power by appointment. Iisdpsildwxsfx Ah Aok

Stanje: dober (rabljeno), Leto izdelave: 1987, Deckel FP4M, orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazom, fiksna miza, SK 40 vpenjalni vretena, dodatki: različne vpenjalne tule in stebla za rezkala. V dobrem delovnem stanju, pripravljen za uporabo. Po dogovoru je možen preizkus pod napetostjo. Iiodpfsxmi I Isx Ah Ask

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Iijdpsuclbzjfx Ah Aok