Cts nakup rabljenega (6.966)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industries and workshops. They are designed to heat larger areas such as factory halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up periods and can warm production halls, joineries, or carpentry shops as well as other production sites in a very short time. Solid wood and its by-products (e.g., solid timber board scraps, chips, sawdust, pellets, or briquettes) are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the German 1st BImSchV. - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h Casdpfx Aevz Hq Hofqsa - Air flow: 4,900 m³/h - Combustion chamber depth: 650 mm - Feed door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Flue draught requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable floor area: approx. 220 m² - Required space: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney pressure: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 200 mm - Further technical details can be found in the attached data sheet The two hot air outlet pipes are located at the lower rear side of the furnace. A maximum of 20 meters of pipe per outlet is permitted for air distribution.

Leto izdelave: 2021, obratovalne ure: 100 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H / Type 22 400 Volts, 2,200 Watts 60 l waste container Max air flow: 330 m³/h Max vacuum: 240/300 mbar Filter stages: 1. Filter stage: liquid bath separator Casdpfx Afovt Agheqea 2. Filter stage: demister 3. Filter stage: stainless steel filter 1m² 4. Filter stage: H14 filter cartridge, EX-protected for use in Zone 22 according to EN 60335-2-69 incl. Annex AA and EN 62487 as well as ATEX 2014/34/EU Includes 3.5 m ESD-PUR suction hose Ø40mm, electrically conductive, with stainless steel Kamlock coupling, crevice nozzle Serial number 21000002 LxWxH: 83x68x165 cm 1 pc. 072-0401-ESD ESD extraction arm Ø50mm x 1,500mm length, table mounting 030902 Certified to IEC 61340-5-1, with 3 joints 1 pc. ESD flat hood Ø50mm, 300x200mm including hood tube connector, certified to IEC 61340-5-1 SET: bracket for extraction arm Ø50mm Material: steel/plastic

Stanje: zelo dobro (rabljeno), 200m³ stainless steel tanks Cajdpfxjfngl No Afqea Number of units: 3 180m³ stainless steel tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Base thickness: 5.1 mm We offer transport to all regions of Europe with our specialized trailer!

Stanje: dober (rabljeno), Selten verfügbar. Idaho Little Gem 40" Former zur Herstellung von Kartoffelkroketten usw. Dies sind die Industriestandard-Maschinen, die von den weltweit führenden Fast-Food-Ketten zur Produktion eingesetzt werden. Caodpfx Aoigrvpjfqsa

Stanje: rabljeno, Power supply, rectifier, power unit, switched-mode power supply Caedpfxod Tn Dco Afqea -Type: EXI-05030 -Input: 170 - 264 VAC / 2.5 A -Output: 5 VDC / 30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Stanje: rabljeno, freezer MP type: IQF 1220.15/3070 suitable for nitrogen operation all stainless steel construction maximum product height: approx. 100 mm Cjdjv Ukz Nepfx Afqjaa capacity: approx. 5,000 kg/h product load (kg per meter run): approx. 13-14 kg/m 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW pneumatic: 1 Nm³/h at 5-7 barg LIN liquid nitrogen 3 barg net belt width: approx. 1,220 mm net belt length: approx. 16,800 mm dimensions (LxWxH): approx. 17,700 x 2,600 x 2,600 mm (max. open)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industry and craft enterprises. They have been specifically designed for heating large work areas, such as workshops and workspaces in trade and industrial businesses. These hot air systems require no lengthy preheating phases and quickly warm up carpentry or joinery shops as well as other production facilities. Suitable fuels include solid wood and wood processing by-products, such as solid wood panel residues, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392/CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the required emission values in accordance with the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirements: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Flue gas temperature: 289°C Caedovz Hqyopfx Afqja - Hot air outlet connectors: 2 x Ø 450 mm - For further data, please refer to the attached data sheet The two pipes for the outgoing hot air are located at the lower rear of the furnace. For each pipe, a maximum duct length of 20 meters is permissible for air distribution. Greater lengths are optionally available by agreement with the manufacturer. Please contact us for details.

Stanje: dober (rabljeno), Injectstar vakuumska tumblerka Nerjaveče jeklo, tumbler s prostornino 1200L, nastavljiva hitrost, časovna regulacija, z vakuumom, trifazni priklop Codpfevfd Ecjx Afqsaa

Stanje: dober (rabljeno), Izbira 40'' bobnov za izdelavo izdelkov kot so hash browni, krompirjeve vaflje ipd. Prosimo, upoštevajte, da je enota za trikotne hash browne že prodana (avgust 2025). Cjdsqpd Ttepfx Afqoaa

Stanje: rabljeno, Pressure vessel, air receiver, pressure tank, Caedpfx Afsin Hq Eoqsa - Manufacturer: UM Alloy Products, stainless steel compressed air vessel - Model: 316L MAWP 9 BAR - Capacity: approx. 5 litres - Permissible operating overpressure: 9 bar - Dimensions: Ø 240 x 300 mm - Weight: 5.3 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot air furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industry and craft businesses. They are designed for heating larger utility areas such as workshop halls and workspaces of industrial and artisanal enterprises. These hot air systems require no long warm-up phases and quickly heat up the workshop, carpentry, or other production facilities in a short time. Solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, can be used as fuel. MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the machinery safety directive 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output (kcal): 12,720 - Fuel consumption: 4.5 kg/h - Air flow: 2,400 m3/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2 – 0.3 mbar Cjdpfx Aovz Hqtjfqsaa - Draft requirement (nominal output): 0.18 mbar - Heatable room volume: approx. 300 m3 - Heatable area: approx. 60 m2 - Space requirements: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Required chimney draft: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two hot air outlet pipe connections are located at the rear bottom of the unit. A maximum duct length of 20 meters per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Csdpfjvz Hqmsx Afqeaa Total Power Requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide the ideal solution for energy utilization in wood processing industries and workshops. Designed for heating large utility areas such as factory halls and workspaces in craft and industrial operations, these hot air systems require no prolonged preheating phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Fuel materials include solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety directive of machinery 89/392 CE. All MARTINA Series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission values required by Germany’s 1st BImSchV regulation. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air fan: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Footprint required: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet nozzles: 2 x Ø 200 mm - Further technical data available in the attached data sheet The two hot air outlet connections are located at the rear lower section of the furnace. Each outlet may be connected with a maximum pipe length of 20 meters for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger usable areas such as factory halls and workspaces in industrial and craft enterprises. These hot air systems do not require long heat-up periods and can quickly warm up workshops in joineries, carpentries, or other production facilities. Fuel materials include solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE (Italian Presidential Decree No. 459 of July 24, 1996) and safety directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission standards stipulated by the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 kcal - Fuel consumption: 50 kg/h - Air delivery rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (outlet): 250 mm - Recommended chimney diameter: 300 mm Caedjvz Hqgjpfx Afqoa - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located at the rear of the furnace at the bottom. Each pipe connector allows a maximum of 20 meters of ducting for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed to heat large usable areas, such as workshops and workspaces in craft and industrial facilities. These warm air systems require no long preheating phases and heat the workshop or production space – such as in carpentry or joinery shops – within a very short time. They can be fueled with solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Presidential Decree Italy No. 459 dated July 24, 1996, and Safety Directive 89/392 CE. All MARTINA series warm air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both levels of the 1st BImSchV prescribed emission limits. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 Kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air fan: 1.05 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable surface: approx. 500 m² - Required space: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (outlet): 200 mm - Recommended chimney diameter: 250 mm Cedpfx Aevz Hhxsfqeaa - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 287 °C - Warm air outlet sockets: 2 x Ø 220 mm - For further details, please refer to the attached data sheet. The two pipe flanges for warm air discharge are located at the rear bottom of the furnace. A maximum pipe length of 20 meters is permitted per flange for air distribution.

Leto izdelave: 2014, Stanje: dober (rabljeno), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg ATEX-certified (explosion proof) The vacuum cleaner is in good condition and ready for immediate use. Machinery buying/selling Caedpfxohu Sf Hs Afqja PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality, yet affordable metalworking machine for your manufacturing operations? Or are you looking to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: skoraj kot novo (rabljeno), Separator kosti Proizvajalec: Inject star Model: P 20 Zmogljivost: 300 kg/h Caedpoxtpgdsfx Afqsa Moč: 8 kW Dimenzije: 1800x830x1800 mm Teža: 1330 kg

Leto izdelave: 2023, obratovalne ure: 2.000 h, Stanje: rabljeno, Pogon: Dizelsko-električni Moč: 55 kW / 80 kVA Oprema: Cajdpfx Ajxrzymefqoa Vnaprej določene frakcije Sistem za hitro menjavo Centrifugalni separator Duramax čistilni elementi Split-Speed sistem Ekstra dolgi transportni trakovi Delovni položaj: Dolžina (mm): 12.700 mm Širina (mm): 11.200 mm Nalagali rob (mm): 3.500 mm Višina izmeta (mm): 3.500 mm Transportne dimenzije: Dolžina (mm): 11.950 mm Širina (mm): 2.550 mm Višina (mm): 4.000 mm Teža (kg): 25.000 OPTIONALNO na voljo: Kamniti trak Gosenicno podvozje Magnetni valji Vetrovi separator Avtomatsko centralno mazanje In še veliko več...

Stanje: dober (rabljeno), Natančno delo zahvaljujoč rezu od spodaj Velik obseg vrtenja do 45° levo in do 0° desno Poseben rotacijski mehanizem z integrirano okroglo mizo omogoča delo spredaj pod vsemi koti Za nazaj pomična omejevalna letev omogoča optimalno izrabo žaginega lista pri širokih in nizkih profilih Ročni pomik materiala Cedpfsxu U Hfox Afqsaa Serijsko opremljeno z žaginim listom in stojalom Pnevmatske vpenjalke materiala (vertikalno) Dozirna pršilna naprava Vzdrževalna enota Žaga ni delujoča – primerna za rezervne dele, cena po dogovoru

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 18 meseci, vhodna napetost: 240 V, merilno območje os X: 250 mm, merilno območje os Z: 320 mm, skupna masa: 100 kg, dolžina podajanja os X: 250 mm, dolžina podajanja os Z: 320 mm, Oprema: Na voljo je tipska ploščica, Modular expandable base contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Free commissioning and training within a 150km radius - Free software updates for contour software - Up/down measurement direction switching - Roughness testing - Motorized Y-axis support table - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) Csdpfoxgqlhox Afqsaa - Dominant waviness Scope of delivery: - Complete mechanics with Y-axis adjustment table (17mm travel) - Integrated control unit - PC W11/64Bit; 24" TFT flat screen - ConturoMatic software; operating instructions - Dust cover, robust design, water-repellent Technical data: Measuring range X: 250mm Measuring range Z: 320mm Resolution: 1nm Measuring systems: optical incremental System accuracy: +/- (0.9μm + L/100)μm* [L=mm] Probing force control Measuring speed: 0.1–3.0mm/s, auto-optimizing Positioning speed: up to 25mm/s Table load capacity: 35kg Precision guideway on granite base Weight: 95kg - 18 months warranty from delivery date -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Gradbeni projekt SRB - Vranje se ukvarja s proizvodnjo celotne opreme za peletiranje s kapaciteto od 500 kg/h do 6 t/h. Proizvajamo: - Kotle - Sušilnice - Siloji - Mešalniki s kondicionerjem - Mlin - Hladilnik pelet - Prese - Transportni trakovi Casdpfx Afsxqd T Hsqsa - Mešalniki - Sistemi za odpraševanje - Droblilci Za vso našo opremo prejmete 1-letno garancijo. 24-urna servisna podpora. Nudimo naslednje storitve: - Montaža opreme - Diagnostika - Servisiranje - Vzdrževanje linij - Usposabljanje delavcev - Zagon linij Vsa povpraševanja in zahteve lahko pošljete po elektronski pošti ali nas kontaktirate po telefonu vsak delovnik od 9. do 17. ure.

Stanje: novo, Leto izdelave: 2025, Sita za štirigredne drobilce Cajdpfx Afsxn Namoqja Modeli: RS, ZM, ZMK, GZ Tip: SB-450, SB-760, SB-960, SB-1030, SB-1230 Leto: 2025 Nov del / pripravljen za uporabo Smo proizvajalec rezervnih nožev in nadomestnih delov za drobilce in sekljalnike. Prosimo, da ob povpraševanju navedete ime proizvajalca in tip stroja.

Stanje: skoraj kot novo (rabljeno), Injektor Cajdpfoxruinsx Afqja Model: BI 204 C Proizvajalec: Inject star Nerjavno jeklo Moč: 9 kW Napetost: 3 x 400V / 50Hz

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: ANTARES Letnik: 2025 Csdpfoxn Nvhjx Afqeaa Nov / takoj pripravljen za uporabo Izdelujemo rezervne nože in nadomestne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: MICROMAT Leto izdelave: 2025 Codsxn Nyajpfx Afqsaa Novo / Takoj pripravljeno za uporabo 1. Nož 43x43x20 2 kos (KR) 2. Nož 43x43x20 2 kos (K8) 3. Nož 43x43x23 1 kos (KR) 4. Nož 43x43x23 2 kos (K8) Proizvajamo nadomestne nože in rezervne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rezalni noži Cjdpfx Afsxn H Saeqeaa Model: WEIMA, GROSS, UNTHA Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Novi / takoj pripravljeni za uporabo 1. Nož 1Z-115 2. Nož 2Z-115 3. Nož 3Z-115 Smo proizvajalec nadomestnih nožev in rezervnih delov za drobilce in sekljalnike.