Laser exposure for PCB / DRY FILM

GIS / Drop AG by Hans Lüscher HDI LDI DPX 325S

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Bjdpfx Aov A Uw Dsfteww Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.000 kg, moč: 17 kW (23,11 KM), skupna širina: 1.510 mm, skupna dolžina: 6.500 mm, skupna višina: 1.820 mm, Avtomatski stroj za izdelavo papirnatih pokrovov iz role s vgrajenim strojem za pakiranje, za pokrove za 8 oz in 12 oz kozarce. Hitrost: 70–100 kosov/minuto Surovina: enostransko ali dvostransko (polietilensko) folijo prevlečen/laminiran papir (kot PE prevlečen papir, PLA papir, karton s folijo) Velikost pokrova: za 8 oz in 12 oz Delovna moč: 12 kW Skupna moč: 17 kW Bodpfx Afsxur Hioteww Vir napajanja: 3-fazni, 380V, 50/60Hz Uporabnik mora kupiti kompresor zraka.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, hod: 300 mm, obratovalna hitrost: 75 mm/s, hitrost vzvratne vožnje: 75 mm/s, višina mize: 930 mm, skupna masa: 7.500 kg, skupna dolžina: 4.350 mm, skupna širina: 1.820 mm, skupna višina: 2.680 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 100 t, dolžina mize: 3.060 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Unique opportunity for anyone seeking a top-of-the-line CNC press brake available immediately. We are offering a SafanDarley E-Brake 100-3100, 100% electric, a BRAND NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. This machine has never been used in production: the very few operating hours are solely related to demonstration activities. Key Features: • Showroom-new machine • Never used in production • Ready for immediate delivery • Energy-efficient electric technology • High bending precision and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic press brakes Machine Configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bend sequence calculation Bodpjzcmabsfx Aftjww • Motorized and independent Z1+Z2 axes • Extra backgauge with Z0+Z3 axes • Wila upper beam with hydraulic clamping • Wila lower beam with mechanical clamping and set of bars for using Schiavi-type dies • Adjustable front supports in aluminum • Integrated safety light curtains • 590 mm open height / 300 mm stroke • Industry 4.0 interface The machine is offered for sale exclusively due to the renewal of the exhibition area and replacement of the current showroom model.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: div., Naprodaj: Bjdpfx Afewpww Eotjww • 1x Kuris Pionier, polagalni stroj vključno z namizom za polaganje, vključno z avtomatskim servo-rezalnikom in vključno s trakom noža. Kompletna cena: 6.750 € (pri razstavljanju s strani kupca) • 1x Kuris Pionier, polagalni stroj vključno z namizom za polaganje in vključno s trakom noža. Kompletna cena: 5.750 € (pri razstavljanju s strani kupca) 1x Bierrebi rezalni avtomat, vključno z mizo za pripravo rezil. Cena: 4.950 €

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Lasersko rezanje 569 delovnih ur Zadnji tehnični pregled: 10.02.2023 6000-W vlaknasti laserski vir z hladilnim modulom Največja dolžina: 3048 mm Največja širina: 1524 mm Z-os: 100 mm Največja teža pločevine: 750 kg Maksimalna debelina reza: Mehko jeklo: 25 mm Nerjaveče jeklo: 20 mm Aluminij: 20 mm Baker: 8 mm Vključuje programsko opremo: PARTS.L – vodenje proizvodnje ADDIN.SOLIDWORKS – integracija med Solidworks in Streamlaser STREAMLASER – CAM in razporejanje izsekov (nesting) Bedpfsmzbkrex Aftjww VALUES.L – ocena proizvodnih stroškov Računalnik z Intel Xeon W-2123, Nvidia Quadro P2000, 16 GB RAM Stroj je kot nov, popolnoma delujoč.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X82600, vpenjalna sila: 12.000 kN, premer vijaka: 150 mm, razmak između stupova: 1.200 mm, delovna prostornina: 12.193 cm³, tlak vbrizgavanja: 1.500 letvica, injekcijska masa: 11.584 g, odmični hod: 1.400 mm, Used Stork IMM 12000-19000 injection moulding machine. Bwedpfxjwhkfyj Aftjw

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Bjdjd Aca Ajpfx Aftsww Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 220 V, Oprema: samodejni duplex, zaključevalnik brošur, RISO COMCOLOR 3110 (A4), zmogljivost 90 strani na minuto, z dodatnim opremo za obdelavo (FDS) in skenerjem. Naprava je v odličnem stanju. Izpisano je le 606.000 barvnih in 1.730.000 črno-belih strani. Tiskanje je brez napak, saj je bila naprava redno vzdrževana. Preostanek črnila je približno 50–60 %. Splošne informacije: - Naprava je odlična in v celoti deluje. Vsi sistemi in tiskalna glava delujejo brezhibno. Brez napak. - Pred nekaj tedni je bil opravljen splošen tehnični servis. - Napravo lahko pošljemo po vsem svetu. Pred pošiljanjem bomo zagotovili, da so vsi sistemi varno nameščeni in jo shranili na 2 standardni paleti, velikosti 80 cm x 120 cm. Bwodpfxjxwc S Ij Aftow - Za države EU lahko izdamo račun brez DDV. Prosimo, da zahtevate ponudbo. - Za države, ki niso članice EU, prosimo, da zahtevate ponudbo. Za dodatne informacije nas lahko kontaktirate.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10024150, Naaimachine Muller Martini Ventura MC-200, Machinesnelheid* Mechanisch van 18 tot 200 cycli/min, max. 12.000 cycli/u, minimale katernlengte 120 mm, maximale katernlengte 510 mm, minimale katernbreedte 75 mm, maximale katernbreedte 320 mm, maximale katerndikte 4 mm, lapopening minimaal 8 mm, lage of hoge foliolap, Standaard aantal steken 13, versprongen 14, Steeklengte 16,5 mm, met/zonder blindsteek mogelijk voor alle steektypen. Naaimachine Muller Martini MC 200. Bjdpfxsx Rywko Aftoww

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 230 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 300 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 150 mm, teža obdelovanca (maks.): 20 kg, skupna višina: 890 mm, skupna širina: 986 mm, skupna dolžina: 705 mm, skupna masa: 170 kg, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, SPECIAL OFFER with optional complete service (delivery, commissioning) Bwsdpjxfzzqjfx Aftjw Technical data of the measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: 2015 Maximum feed rate in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (trigger probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axis (trigger probe system): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (trigger probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment/features of the measuring machine: - 3-axis microprocessor CNC with vector path control - Metrology software: PC-DMIS Vision - Vision sensor for non-contact measurement of very small and precise components - CCD camera with 6.5x motorized CNC zoom - DC servo motors - TESA probe system (1 body and 1 module) - Modular probe changer: TESASTAR with 4 slots and 4 modules - Linear guides on all axes - Coaxial LED upper light (white LED) - LED backlight (green LED + diffusion disk) - Multi-segment LED ring light - Evaluation PC by Dell included Optional services: - Delivery (at extra charge) - Commissioning (at extra charge)