Cts nakup rabljenega (6.919)

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Hodpfjvitmdjx Ah Donu Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/1000 CTS Climate Test Chamber Condenser: air-cooled refrigeration unit Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Plain text error messages RS 232 interface Free switching channels for external test specimen control Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate Heating rate: 2.0 K/min Cooling rate: 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K over time Heat Radiation: approx. 2500 W at +20°C Hodpfx Aheru Dzus Donu approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working Range: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Dewpoint range I: +7 to +94°C Dewpoint range II: -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K over time Humidity stability I, over time: ± 0.5 to ± 1.5 % r.h. Humidity stability II, over time: ± 1 to ± 3 % r.h. Panoramic window 570 x 710 mm Test chamber dimensions: Width 1000 mm, Depth 1100 mm, Height 900 mm External dimensions: Width 1270 mm, Depth 2220 mm, Height 1950 mm Test chamber volume: 1000 liters Tube ports, ø 50 mm Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg For your safety as a buyer, the following information: The following steps are carried out for our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change; errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) Hjdpjvaxq Njfx Ah Donu For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T = Temperature W = Walk-in -60 = Minimum temperature -60°C 9 = 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low noise, semi-hermetic, stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of setpoint and actual values Numeric input of setpoints Error messages in plain text RS 232 interface Free switching channels for customer-side test specimen control Technical Performance Data: Temperature testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rate, average with test specimen and radiant heat measured in supply air. Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test item: 420 kg solar cell modules, 100% with test Continuous radiant heat: 3000 W Technical data based on ambient temperature +25°C, nominal voltage 400 V, without test load, without radiation and without additional equipment. Dimensions: Hodpfx Ahevb E Uqo Djnu Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection class: IP54 Cooling water connections: coolant supply/return R1 ¼", internal thread Condensate drain, non-pressurized, R1", internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, please call us.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Hodpfx Aevb Hanoh Dsnu Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y / 4PC-10.2Y Hnedpjvcyawjfx Ah Dou Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The "Ex/l" designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for operation in environments where explosive atmospheres may occur. Such equipment is specifically constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Hnjdowvr H Uopfx Ah Dsu Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climatic Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% r.h. over time The technical specifications refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Refrigeration unit: water-cooled, low noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A Test chamber floor load capacity: 150 kg/m² Insert rack: stainless steel Usable surface area: 620 x 600 mm Max. load per rack: 35 kg Total load with maximum rack configuration: 100 kg Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for specimen control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level:

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm Hedpfxsihb Amo Ah Dsnu External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: zelo dobro (rabljeno), CTS CW‑60/6 – Climate Test Chamber, Water-cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climate test chamber allows the function or material properties of a test sample to be assessed under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate ensures optimum transfer to the test specimen. The air handling section is situated at the rear of the chamber interior. The refrigeration units are positioned behind the chamber in a separate frame for easy access. The control system is housed in a separate switch cabinet, with the operating panel integrated into the door of this cabinet. For dehumidification of the test area, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air using a blower. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +120 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test sample and radiant heat, measured at air inlet): - Heating: 1 K/min from -40 °C to +80 °C - Cooling: 1 K/min from +80 °C to -40 °C - Test sample: 700 kg steel - Radiant heat: - 2 kW during temperature change - 5 kW stabilized at -40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 85% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time The technical data refers to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Chamber Interior (Test Chamber / Usable Volume): - Volume: approx. 6,000 liters (6 m³) - Interior dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1500 mm (slight variations depending on configuration) External Dimensions: - Height: ~2300–2500 mm - Width: ~2400–2600 mm - Depth: ~1800–2200 mm (depends on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 44.4 kW (incl. 5 sockets) - Rated current: 84.7 A Hnedpfjwu Epgex Ah Dou - Protection rating: IP 54 Technical Specification: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless performance adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes - Inspection possible by appointment (46325 Borken) - Shipping possible via freight carrier – costs and arrangements on request - Scope of delivery: (see photo) (Changes and errors in technical data and specifications are reserved.) Further questions can be answered by phone at any time.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 576 h, JCB 8008 CTS mini bager iz leta 2020 s samo 576 delovnimi urami! ---- * Proizvajalec: JCB * Tip: 8008 CTS * Leto izdelave: 2020 * Prebrane delovne ure: cca 576 * Obratovalna teža: 950 KG * Transportna teža: 875 KG * Vključno z 2 žlicama * Razširljivo podvozje * Moč: 9 KW * Pripravljeno za cevovod * Deska * Video na zahtevo * Cena: 9.900 EUR, neto + 19 % DDV ---- Za dodatna vprašanja pokličite: Za več informacij pokličite: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Hedpfx Ahexnhhve Djnu *Vse informacije brez garancije, napake in vmesna prodaja pridržane.*

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 2.000 h, moč: 283 kW (384,77 KM), Oprema: kabina, klimatska naprava, * Engine manufacturer: John Deere Equipment: Hnjdoil Hadopfx Ah Deu Air conditioning, straw chopper, header trailer, slope compensation, on-board computer/monitor, throughput monitoring, yield measurement, horizontal reel adjustment, hydrostatic drive, reversing system, header, loss monitoring Shaker with JD625R header with 7.60 m working width, transport trailer, and rapeseed table ENGINE MAKES NOISES.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, Demo stroj: digitalni laserski osvetljevalni sistem 5060 CtS z največjo velikostjo sita 500 x 600 mm naprodaj. Ločljivost 2540 dpi, 30 W laser, vakuumska miza in pnevmatsko vpenjanje okvirjev do 30 mm. Hodpfxow T Si Ne Ah Donu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Naprodaj je predpripravni sistem EXILE – komplet: CTS osvetljevalnik in UV LED kabina za ekspozicijo. Naprave iz sredine leta 2022. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serijska številka: 900 100523/182 • Datum izdelave: 07/2022 • Različica: DTS 30″ • Pin registracija: MHM • V kompletu: 1× Screen Drum • Nova tiskalna glava: 2025 2. Ekspozicijska kabina – EXILE V LUX UV LED Exposure Cabinet • Serijska številka: 450 04560 03/129 • Datum izdelave: 05/2022 3. RIP programska oprema Hnjdpfx Asxb Ru Eeh Deu • SCREENMAKER RIP Kit (za Windows)

Stanje: novo, Tip: Operaterski vmesnik P Blagovna znamka: Krones B&R Hodpfsh Rulpsx Ah Denu

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, ESG peč / linija za utrjevanje stekla TAMGLASS / GLASTON, HTF ProE-2442-CTS-10-R 2400 x 4200 mm, desno – levo Leto izdelave: 2000. S konvekcijo (Low-E steklo) Hedpfx Ajxaugceh Donu Zvočno izolirana kabina vključena. 400 V, 50 Hz, skupna moč: 1210 kW (grelniki 630 kW, motorji 580 kW) V dobrem tehničnem stanju. Ogled je možen po dogovoru.

Leto izdelave: 2017, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1737522032, Stepless nastavljiva in blokirljiva žagalna glava po višini, zaščita pred pršenjem Stranski podajalnik s ročnim kolesom za udobno upravljanje Odstranljiva posoda za vodo, enostavna za čiščenje Žerjavne ušeske za enostavno premikanje na gradbišču Hnodpfxjw Rnzcj Ah Dou

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 972 h, JCB 8008 CTS mini bager, letnik 2021, z le 972 delovnimi urami! Hjdpfjw N Ui Dsx Ah Denu ---- * Proizvajalec: JCB * Tip: 8008 CTS * Leto izdelave: 2021 * Približno 972 prebranih delovnih ur * Delovna teža: 950 kg * Transportna teža: 875 kg * Vključno z 3 žlicami * Razširljivo podvozje * Moč: 9 kW * Pripravljeno za hidravliko * Dozer rezilo * Video na zahtevo * Cena: 9.900 EUR, neto + 19 % DDV ---- Za dodatna vprašanja prosim pokličite: For more question please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Vse navedbe brez jamstva, pridržujemo si pravico do napak in predhodne prodaje.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, Demonstracijski stroj digitalna laserska osvetlitvena naprava 1010V z največjo velikostjo sita 1000 x 1000 mm naprodaj. Ločljivost 2540 dpi in 25 W laser. Hjdpjw T Sfkefx Ah Donu

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 103 h, JCB 8008 CTS - Mini Excavator (Year of Manufacture: 2022), Model Year 2023! Operating hours: only 103h, Engine output: approx. 12 HP / 9 kW, Operating weight: approx. 950 kg, - Handrail at control panel, - 180 mm wide rubber tracks, - Plastic seat with high backrest, - Double-acting auxiliary hydraulics incl. piping on the boom, - Dipstick 887 mm, - Extendable undercarriage, Hjdpfx Ahewpytcj Denu - Work light on boom, - Quick coupler MS01 included, - Attachments available immediately on request, On request, we can provide you with a leasing or financing offer via JCB-Finance. Mr Mihm (phone) will be happy to assist you. For more information, please visit our website. Subject to errors and prior sale!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Tamglass HTF ProE 2136-CTS-20-L (iC) Glaston Ofen Computer / Software 2020 Glaston iControl-Upgrade 2020 Glaston Ofen 1 PC-Upgrade 2023 Glaston Gebläse-Upgrade 2020 Glaston Ofen integriertes Scanner-System 2020 Lieferjahr 2013 • Thermosensor-Upgrade Lieferjahr 2014 • Luftmengen-Balance-Upgrade (AAB) Lieferjahr 2019 • Neue Laufräder (2 Stück) für Gebläse KSXMB-80-3 RD/LG • Neue Lagereinheiten (2 Stück) für Gebläse KSXMB-80-3 RD/LG • Upgrade Vibrationsüberwachungssystem der Gebläse (BMONi) • Frequenzumrichter für Abschreck-Gebläse (S) TECHNISCHE SPEZIFIKATIONEN UND DATEN TAMGLASS HORIZONTALES ESHARTUNGS-OFEN Glasstärkenbereich: 3,8...19 mm (Eschelrung) Beschickungsfläche: 3,8 mm und größer 2100 mm x 3600 mm Maximale Glasgröße: ANSI Z97.1-1984 ECE R43 4,7 mm und größer 2100 mm x 3600 mm (3900)*, 1000 mm x 1500 mm 3,8 mm und größer 2100 mm x 3000 mm *Einzelscheiben können um 300 mm länger mit reduzierter Produktionsrate vorgespannt werden Minimale Glasgröße: 3,8 mm und größer 100 mm x 250 mm Maximale Produktionsraten bei K = 100 %, mit klarem Floatglas: 4 mm 160 m2/h 5 mm 135 m2/h 6 mm 112 m2/h 8 mm 84 m2/h Hsdpfx Aewinuhsh Donu 10 mm 67 m2/h 12 mm 56 m2/h 15 mm 45 m2/h 19 mm 35 m2/h In der Praxis erreichen die Produktionsraten 50-85 % des Maximums und hängen von den Glasabmessungen, der Kantenbearbeitungsqualität und der Ausnutzung der Beschickungsfläche ab. Mindestabstand der Scheiben zueinander: 50 mm. Umgebungsbedingungen: Temperatur 20…40 ºC Relative Luftfeuchtigkeit < 80 % Installierte Leistung auf Meereshöhe: Heizung und Antrieb: 464 kW Gebläse: 2 x 215 kW = 430 kW Gesamt: 884 kW

Leto izdelave: 2021, Stanje: novo, Offered from stock: Unused Cedima table saw Model CTS-375.3 Max. cutting depth: 425 mm Max. cutting length: 1000 mm Blade diameter: 900/1000 mm Blade bore: 60.0 mm Motor power: 7.5 kW Voltage: 400 V / 50 Hz with operating hours counter Including 900 mm TS Poro Plus 60 4.5X10X40 blade This is the best price available online! Hnedpfsvu Tv Asx Ah Dsu

Stanje: skoraj kot novo (rabljeno), VA5CK8 Spindelpatrone 10K CTS Spintech 10.000 U/min z.B. für UVA 550 / 725 Ersatzteilzustand: - unbenutzt Garantie: - keine Zahlungsbedingungen: - Vorkasse Lieferung: - verpackt in Holzkiste Hnjdpfx Aov Avameh Dju - ab Werk - zzgl. Versandkosten #Arbeitsspindel #Frässpindel

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 921 h, JCB 8008 CTS Minibager iz leta 2021 z le 921 delovnimi urami! ---- * Proizvajalec: JCB * Tip: 8008 CTS * Leto izdelave: 2021 * Prebrane delovne ure: ca. 921 * Obratovalna teža: 950 KG * Transportna teža: 875 KG Hnedow N Ui Rspfx Ah Dou * Vključno s 3 žlicami * Razširljivo podvozje * Moč: 9 KW * Opremljen z napeljavami * Dozer rezilo * Video na zahtevo * Cena: 9.900 EUR, neto + 19 % DDV ---- Za dodatna vprašanja pokličite: Za več vprašanj pokličite: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Vse informacije brez garancije, pridržujemo si pravico do napak in prodaje v vmesnem času.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, LÜSCHER JetScreen CTS 70/38, Computer-To-Screen System Screen imaging is carried out directly from the computer onto the screen printing stencil. The stencils are produced quickly, precisely, without repro film, digitally and electronically using the wax jet method with CTS technology (wax heating). Maximum stencil size: 3800 x 7000 mm, resolution: up to 600 dpi, power supply: 400 V, 50 Hz, year of manufacture: 2001, not functional. ( Option: Conversion of the Lüscher Jetscreen to a digital exposure system (DLE) possible. - Durable UV-LED light source with combined wavelengths - Exposure resolution approx. 1270 dpi. Exposure speed depends on the UV emulsion and mesh used Hsdpfxjd I Ul Uj Ah Dsnu - Alternative resolutions available upon request, e.g. 720 dpi or 1000 dpi ) Note: The system is non-functional!!!

Stanje: skoraj kot novo (rabljeno), RB4013 Spindel-Kartusche 10K mit CTS 10.000 U/min z.B. passend für UVA 1030 / Finetech 3 Stück verfügbar Ersatzteil zum Verkauf Zustand des Ersatzteils: Hnjdpev Ai A Usfx Ah Dju - unbenutzt Gewährleistung: - keine Zahlungsbedingungen: - Vorkasse Lieferung: - verpackt in Holzkiste - ab Werk - zzgl. Versandkosten #Arbeitsspindel #Frässpindel