Blok Lepilo Tiska nakup rabljenega (11.595)

Leto izdelave: 2011, Stanje: dober (rabljeno), Special price: 1 used, well-maintained turning device designed for a load capacity of 300 tons, consisting of: 1 powered unit Kdodpfx Aasfn Hmzjmow 1 idler unit with the following technical specifications: Model: PR 3000 SB Total loading capacity: 300 t Load per unit: 150 t Roller diameter/width: 850 x 250 mm; Roller material: steel Roller axis height: 778 mm from the bottom edge of the machine frame Rotational speed: 65–1,230 mm/min, continuously adjustable Support diameter: 1,000–9,000 mm Electrics: Control cabinet mounted rigidly to the machine frame of the drive unit Control: cabled remote control Connection voltage: 380/400 V, 3-phase, 50 Hz The system is also available for rent (trial rental).

Stanje: rabljeno, for milling fixtures, spindle head, tool holder, tool carrier - Manufacturer: Diebold, mounting block for assembling and disassembling tool combinations - Arrangement: vertical and horizontal - Taper: SK40 Kdodpfx Aajwvfrwomsw - Dimensions: 275/160/H180 mm - Weight: 10.5 kg

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s Kodpevn U S Sefx Aamsdw

Leto izdelave: 2020, Stanje: novo, The PT-400 belt press is a machine designed for extracting apple must. This process takes place between the machine’s belt and appropriately positioned press rollers. The extracted juice is pumped directly into the pasteurizer tank. The entire unit is constructed from AISI 304 stainless steel. TECHNICAL SPECIFICATIONS: - Capacity: up to 500 kg of apples per hour Kodpfx Ajfgl Hfsamjdw - Juice yield from pressed apples: up to 75% - Installed power: 0.8 kW, 230V - Water consumption: up to 4 l/min - Weight: 500 kg - Belt width: 400 mm - Adjustable belt speed - Juice tray with screen, mesh diameter: 1 mm - Juice pump included

Stanje: zelo dobro (rabljeno), - Skupne dimenzije: 290x900x410 mm - Sestavljeno iz: Kjdpewyb T Sefx Aamjdw 1) 4-conske steklokeramične kuhalne plošče: - Vodoodporna - Vgradna, poravnana z delovno površino - Enostavno čiščenje - Hitro segrevanje loncev in ponev 2) Električni vodni kopel 1 x GN 1/1: - Globok, varjen bazen iz materiala 1.4571 - Primeren za kuhanje (npr. klobas) - Nadzor nivoja vode 3) Gladka žar plošča: - Moč 4,6 kW 4) Električni žar: Iiey Tdu Dewyb T Sscsf - Moč 4,0 kW - Varjena posoda za zbiranje maščobe in ostankov kuhanja v vodi - Neposredno segrevanje preko odstranljivega grelnega elementa - Rešetka iz kromiranega jekla za optimalno segrevanje izdelkov - Odbojni ščit za pečenje pri visokih temperaturah - Neomejeno nastavljiva temperatura od 50 do 300 °C - Prenovljena oprema: oprema se pripravi po naročilu; čas prevzema in vračila se dogovori v tem trenutku (prosimo za ceno po ogledu)

Stanje: dober (rabljeno), skupna masa: 450 kg, skupna dolžina: 1.050 mm, skupna širina: 750 mm, skupna višina: 500 mm, Clamping cube Manufacturer: STOLLE Kdjdpowq Rg Aofx Aamjw Number of T-slots: 8 T-slot spacing: 160 mm T-slot size: 28 mm Number of T-slotted faces: 1 Length: 1050 mm Width: 750 mm Height: 500 mm Weight: 450 kg

Stanje: rabljeno, Leto izdelave: 2004, Overview  This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue units and three self-adhesive labelling units, offering flexible labelling configurations for a wide range of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical Data  Capacity: 8,000 bottles per hour (6,500 bottles per hour with photoelectric orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, label height 330 mm, steel glue roller Station 2: Wet glue, label height 230 mm, steel glue roller Units 3-5: Self-adhesive Orientation: Photoelectric bottle orientation via closure Prepared for orientation via bottle lug Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-200, Touch TD integrated Rotation direction: Right to left Scope of delivery  GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control system (Siemens S7-200 with Touch TD) Machine safety enclosure with wing and lifting doors Kodpfjwh U D Tjx Aamedw

Stanje: dober (rabljeno), Prism support made of solid steel Kdsdpsd Ipdqjfx Aamsw Dimensions: Width: 137 cm Depth: 40 cm Height: 30 / 50 cm - Application range: D750–D2250 - Steel on steel: 100 tons - Steel with interlayer: 200 tons - Net weight: 1100 kg You can find more items – new and used – in our shop! International shipping costs upon request!

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Kodpfovnwfnex Aamsdw Manual lever operation Pressure cut-off

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, skupna dolžina: 7.500 mm, Blockzug (chain hoist, manual hoist) gebraucht Kjdpfx Aaovtmg Eomjdw

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Kodpfxjfxykpo Aamsdw Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Not tested, but was in use up to removal. Kdodpfx Aaobu N N Njmew May be suitable for spare parts or as a donor unit.

Stanje: rabljeno, Leto izdelave: 2008, Overview This cold glue labelling machine was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels with cold glue and is available immediately. Technical Data Kdsdswaxyijpfx Aamjw Manufacturer: Gernep Model: Labetta 4/3/10 640 2A Year of manufacture: 2008 Rotation direction: Counterclockwise machine (bottle plates rotate counterclockwise) Rated capacity: 14,000 bottles/hour Adjustable from 3,000 – 15,000 bottles/hour 2 cold glue units Label positions: body, neck, back Bottle formats: - 0.5L NRW bottle - 0.33L Vichy bottle - 0.33L Ale bottle

Leto izdelave: 2009, Stanje: rabljeno, Load capacity 5,000 kg *Lifting height 15 meters* Number of chain strands: 2 Load chain: 10 x 30 Ksdpfxecw Tyie Aamjdw Hand chain unwinding per meter lift – 174 m Lifting force at rated load: 34 daN Weight approx. 115 kg 1 unit in stock – price per unit

Stanje: rabljeno, Leto izdelave: 2006, Card gluer Kedpfermypxox Aamedw Müller Martini 423 Year of manufacture: 2006

Stanje: rabljeno, 4/3-way directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer + Grebe control block from vacuum packaging machine Tiromat 3000/430 -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg Kdsdpshvfzcefx Aamsw

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Kdedpsfxykwjfx Aamjw Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: rabljeno, Leto izdelave: 2004, Overview  The labeling machine was built in 2004 by the Italian manufacturer KOSME. The machine is in good condition, professionally dismantled and stored. Features two cold glue stations: one main label, one neck label, and one back label, plus one adhesive station. The labeling machine operates in a counterclockwise direction. Technical Data: Capacity: 6,000 bottles per hour. Labeling stations: 2 cold glue, 1 self-adhesive. Kjdpfx Aov Df I Njamjdw

Stanje: rabljeno, Leto izdelave: 2006, Card gluer Clever & Co Kdjdohd Nkdopfx Aamow Year of manufacture: 2006 Hotmelt glue system Nordson Description: - Suitable for: Kolbus KM 411 - Exclusive universal bases

Stanje: rabljeno, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic module, PLC controller, digital input, digital output, electronic block -Manufacturer: Siemens, Simatic S7 electronic block ET 200L, OVP (original packaging) Kdodpfx Ash Ahhmeamsw -Type: 6ES7 131-1BH01-0XB0 -Carton dimensions: 150/70/H65 mm -Weight: 0.2 kg

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Kdsdpodxvfhjfx Aamew Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l

Stanje: rabljeno, Leto izdelave: 2004, Overview The machine was manufactured in 2004 by the German company Langguth and has been completely overhauled. The images do not show the actual machine but are closely comparable and representative. Technical Data Labeling height up to 210 mm Completely overhauled as shown in the images, but with a base frame made of steel. Includes 2 bottle formats and 2 label formats. Optional with discharge rotary table. Kdjdpfx Asm D Ukijamew

Stanje: rabljeno, Saw roller stand, saw roller trestle, saw horse, roller conveyor stand - Suitable for: hacksaw, bandsaw, cold circular saw - Roller height: adjustable from 620 to 1040 mm - Roller width: 355 mm Kodpfx Aed Dh A Toamsdw - Dimensions: 480/480/H620 mm - Weight: 16 kg

Stanje: rabljeno, Lifting trestle, swivel trestle, jacking trestle, shackle, load lifter, lashing eye, lashing ring, anchorage point, load trestle thread -Manufacturer: Matrinor, 4 lifting trestles/lashing points -Original application: Aerospace industry -Payload: 9,840 kg -Shackle receptacle: Ø 120 mm / M42 Kdodpfxogt Rdpo Aamsw -Price: complete set -Dimensions: 555/252/H175 mm -Weight: 62 kg/piece

Stanje: rabljeno, Saw roller stand, saw roller support, saw horse, roller conveyor stand - Suitable for: hacksaw, bandsaw, cold circular saw - Roller height: adjustable, 475 mm - Roller width: 280 mm - Dimensions: 380/380/H480 mm - Weight: 64 kg Kdsdpfxjb Hd Uus Aamew