Biesse nakup rabljenega (302)

Stanje: rabljeno, številka stroja/vozila: 008030, Tip nameščenega roba: tanek rob, močan rob, masivni les Iodpfxowvq Hge Agpja Lepilni sistem: EVA, PUR, vroči zrak Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 8 kosov

Stanje: rabljeno, Leto izdelave: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm Y-axis: 628 mm Z-axis: 90 mm Max. programmable feed speed: X-axis: 100 m/min Y-axis: 75 m/min Z-axis: 15 m/min Iedpswwnf Nefx Agpea Drill holder: 10 mm diameter Spindle speeds: 4000 rpm Groove saw: 120 mm diameter Drilling spindles: 4 horizontal spindles on X-axis 12 vertical spindles on the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum pump capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Location: Röllbach

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 Ijdpfshvahhjx Agpsa FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 60 mm, višina izdelka (min.): 12 mm, največja dolžina izdelka: 3.200 mm, dolžina izdelka (min.): 240 mm, največja širina izdelka: 800 mm, širina izdelka (min.): 140 mm, TECHNICAL DETAILS Components: ESSE2 cross feeder: automatic BIESSE FTT: with 4 heads, drilling and milling, automatic tool changer Tilting device: present BIESSE FTT: with 2 heads, drilling and milling, automatic tool changer BIESSE FHT: horizontal drilling and dowel insertion ESSE2 cross unloader: automatic Panel dimensions: Panel length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Panel width: 140 - 800 mm Isdpfswmcxisx Agpea Panel thickness: 12 - 60 mm Drilling units: Drilling heads FTT 1: 4 Drilling heads FTT 2: 2 Vertical spindles (X direction): 14 independent per head Vertical spindles (Y direction): 18 independent per head Horizontal spindles (X direction): 3 independent, with double output Horizontal spindles (Y direction): 3 independent, with double output Tool change system: Revolver cartridges: 2 Positions per cartridge: 56 Application: Automatic tool change of the vertical spindle tips on 4 drilling units of the two machining centers A and B Milling spindles: Electric spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-position tool change rack Electric spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-position tool change rack Lateral positioning units: Workstations: 2 for parallel machining of identical or mirrored panels Left positioning element: fixed for lateral reference Right positioning element: movable in X direction, on lower supports, linear guided Adjustment: automatic according to the X dimension of the panel Drive: brushless with digital control Function: Detection of the actual X length in the machining center, automatic correction of the drilling positions Max. traverse speed: 120 m/min Loading and unloading: Infeed system: 1 belt conveyor with cross feed, individual drive Discharge system: 1 belt conveyor with cross feed, individual drive Additional: Cleaning blower in the discharge area Safety features: Standards: CE-compliant Safety equipment: Comprehensive safety enclosures

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: nepreverjeno, številka stroja/vozila: 27233, potovalna razdalja osi X: 5.047 mm, pomik osi Y: 2.060 mm, pomik po osi Z: 275 mm, hitrost pomika os X: 100 m/min, hitrost podajanja osi Y: 100 m/min, hitrost podajanja os Z: 30 m/min, širina mize: 1.650 mm, dolžina mize: 4.500 mm, največja hitrost vrtenja: 24.000 obr/min, skupna masa: 600 kg, Naprodaj je vrhunski CNC-obdelovalni center Biesse Rover 35 L, zmogljiv stroj, idealen za natančno obdelavo lesa, plastike in kompozitnih materialov. Stroj prepriča z robustno konstrukcijo, visoko natančnostjo in vsestranskostjo – popolna izbira za srednje velika ter industrijska proizvodna podjetja. Ker je bila uvedena večja CNC-stroj, Biesse Rover 35 L v zadnjih 5 letih ni bila uporabljena. Orodja, prikazana na slikah, so vključena v prodajno ceno. Znane pomanjkljivosti: - C-os ni funkcionalna - Kontaktne preproge so okvarjene - Vakuumske priseske je priporočljivo zamenjati. Na voljo: takoj Iodpfx Aexpf Rwegpea

Stanje: dober (rabljeno), Leto izdelave: 2013, Épaisseur de chant Rouleau 0,4/3 mm / Bandes 0,4/22 mm Épaisseur des pièces 10-65 mm Dépassement de la pièce 140 mm Iodpfx Agou Hldmspea Vitesses d'avance 10-14-18-20 m/min Équipée de : - Unité de fraisage de double chant - Unité d'encollage - Unité de coupe - Unité de dressage gros - Unité de dressage fin - Unité de profilage - Unité universelle de dressage - Unité de raclage à plat - Unité de polissage des chants - Commande « Sintra » Dimensions (L x l x h) env. 7000 x 1400 x 2100 mm Poids env. 3600 kg Numéro de machine 94391 Année de construction 2013 CE

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Iedpol Txw Hjfx Agpsa Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: rabljeno, Leto izdelave: 2003, BIESSE FDT THROUGH-FEED BORING MACHINE price: €20,000 / net Working field along axis "X": max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling units, 11 spindles per unit, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling units with 11 spindles, 32 mm pitch, quick-change system, without chucks. Each unit is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front drilling units (Y1) along screw guide via handwheel for precise adjustment. • Pneumatic stroke activation with scale for manual depth setting. • Switch for manual stroke operation. • Pneumatic adjustment of drilling speed. • Max distance between first and last spindle on horizontal head: 704 mm • Max stroke of horizontal head on "Z" axis: 5–40 mm Isdjwpq Hmepfx Agpea 5 pcs lower vertical heads Width 96 mm with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Quick-change device for drilling units, with 90° rotation. • Quick positioning of heads along the beam (X axis) through rack guide, gear wheel and position encoder; 2 roller guides; mechanical locking, pneumatic unlocking. • Quick positioning of each drilling unit in the transverse direction (Y axis) via ball screw and position encoder; 1 roller guide; mechanical locking – pneumatic unlocking. • Electronic activation via brushless servomotor; drilling parameter control via NC.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction Iodjw Uhbkopfx Agpea PC control, type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Complete unloader with central roller conveyors 4 motorized floor roller conveyors Isdpjiy Dcpofx Agpoa Complete with CE-compliant safety fences

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 85 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 60 m/min, proizvajalec krmilnikov: Osai, model krmilnika: OPEN M, največja hitrost vrtenja: 24.000 obr/min, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 15.000 W, število vreten: 1, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, 5-axis CNC machining center BIESSE MATERIA CL5020. Cartesian gantry bridge construction. Equipped with brushless servomotors, rack and pinion systems, and preload ball bearing linear guides. X-axis: 5000 mm, max speed 85 m/min Y-axis: 2000 mm, max speed 60 m/min Z-axis: 1200 mm, max speed 60 m/min B-axis: +/- 120°, 30 rpm C-axis: +/- 245°, 30 rpm Fixed table with clamping and locating holes for jigs Spindle head with a 15 kW electrospindle, automatic 8-position tool changer, HSK F63 interface OSAI OPEN M CNC control unit Automatic grease lubrication Power supply: 3 x 400V / 50Hz (+/-5%) Working pressure: 6 bar Ijdjuhw Hmopfx Agpja Used, fully operational machine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljen BIESSE Rover A - Nesting CNC Iodpfexhcndex Agpsa - Letnik: 2016 - Na voljo od novembra 2025 - Dodatne fotografije in video so na voljo

Stanje: rabljeno, številka stroja/vozila: 008027, Maks. obdelovalna širina: 1350 mm Min. obdelovalna debelina: 200 mm Delovna miza: fiksna višina Podtlakovni trak: da Iodpfx Aswvq E Aegpea Število delovnih agregatov: 4 kos

Stanje: rabljeno, Numerical control XP 600 with Biesse Works software Working area in X-axis: 3000 mm Working area in Y-axis: 1000 mm Working area in Z-axis: 60 mm Automatic loading system with motorized belt transfer No. 2 clamps for securing and transporting panels No. 1+1 vertical electrospindle, 3 axes (top + bottom) No. 1+1 independent saw blade (top + bottom) No. 29+29 independent spindles for vertical drilling in 'X and Y' direction (top + bottom) No. 10+10 independent spindles for horizontal drilling in 'X and Y' direction (top + bottom) Iodpfxsuickyo Agpea Automatic unloading system with motorized belt transfer

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW. Ijdpew Ug A Hsfx Agpea

Stanje: rabljeno, številka stroja/vozila: 007687, Type of applied edge: thin edge, thick edge, solid wood Gluing system: EVA, hot air Joint trimming: yes Multi-function unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Iodpjwuz Npofx Agpsa Working units: 7 units

Stanje: rabljeno, Leto izdelave: 2019, Numerical smart-touch control with Sintra HD software Panel thickness: 10 - 60 mm 22 mm solid wood PVC / ABS up to 3 mm Feed speed up to 25 meters/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Side roller conveyor with support wheels for panel support ADZ-700 anti-adhesive unit Rectifier unit with 2 electronically controllable motors via CNC FI-502 Lamps for heating the panel edge AdIRL-700 Roller holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC Iodpfor Ip Sdex Agpja Anti-adhesive unit End trimming unit with 2 motors IN-801 Offset trimming / fine finishing unit with 2 electronically adjustable motors via CNC RF400 PRO-NESTING KIT for finishing unit Anti-adhesive group Corner rounding unit with 2 multifunctional motors (relieving + rounding) AR30 NC LPT-700 anti-adhesive liquid application system Electronic edge scraper electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper RCC-701 glue scraper unit Brush unit "SP-501" Telephone support unit "PH-700"

Stanje: zelo dobro (rabljeno), PC control type NC 400 Deluxe No. 2 motorized throughfeed conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Isdpsrm Ik Tjfx Agpoa Total connected load (kW) The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops. The CNC manages the movement (X-axis) of the transport belts.

Stanje: rabljeno, številka stroja/vozila: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs Ijdpfxswuz Nis Agpea

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Machine suitable for the 1st and 2nd pass of the panel. Ijdpfju Rim Hsx Agpsa Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Anti-adhesive unit. Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, številka stroja/vozila: 006163, Max. panel width: 3200 mm Number of units: 3 Iodpfxoiwpt Uj Agpoa Number of injectors: 6

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software – 3D CAD/CAM program for designing, simulating, and managing processes. Machining of machining centers and drilling machines by Biesse. Ijdpfx Agot Ul Dnepsa BNest software – software module for processing in nesting mode, allowing you to create projects. Includes a list of items with required production quantities and a list of sheets to be used, with the aim of minimizing material usage and machining times. Working area in X-axis: 4,300 mm Working area in Y-axis: 2,200 mm Number of working fields: 2 Nesting worktable Automatic loading system with side lift table Panel separation system with 2 suction cups No. 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool changer, HSK cone type Automatic tool changer system with 16 positions – located at the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - 5 vertical in X-axis - 5 vertical in Y-axis Automatic unloading system with motorized conveyor belt Worktable cleaning system Printing and application system for adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter fences Safety system with bumpers Automatic lubrication system Air conditioning system for cooling and cleaning machine control unit No. 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Stanje: rabljeno, Numerical control with NC 410 software Iedpfxerxzb Ue Agpja Machine suitable for the first pass of the panel Motorized mobile shoulder opening by CNC, 1500 mm Panel height 60 mm PVC/ABS 3 mm Infinitely variable feed speed Electronically adjustable working height by CNC Motorized rubberized belt with superior pressure Squaring unit consisting of (on each side): * Double pre-milling unit * Automatically timed anti-splintering unit Edge unit consisting of (on each side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Pressure roller unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge change * Overlapping trimming unit with 2 motors * Picking unit with 2 tilting motors * Scraping unit tiltable from 0-90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y Iodpfekvrxuex Agpsa - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Iedowt Snyopfx Agpoa Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each