Linija za razstavljanje palet

BIESSE RBO WINNER SC

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED DESTACKING - Bridge Vacuum system (with pump) No. 2 vertical support columns of the upper carrying beam No. 1 horizontal upper carrying beam (on which the carriage glides) Gbsdod Rg Dzepfx Afqsg No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with vacuum suction cups, adjustable No. 2 external roller conveyors for stack discharge No. 1 external motorized roller conveyor for stack discharge, also with belt for rotation of panels by 90°. Dimensions approx. 7168 mm Separate electrical control panel Electronic controller OMRON Perimeter safety fencing with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 - 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Stanje: rabljeno, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed to manufacture door and wall panels up to 610mm wide with an annual output capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Top Sheet Processing Section - 10 T top decoiler with coil car - Roller and pinch pass - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative pattern - Upper roller former (12 stands) - Upper forming mill steel frame - Upper sheet guide 2. Bottom Sheet Processing Section - 10 T bottom double decoiler with coil cart - Polyethylene film applicator - Corona treatment machine - Embossing machine - Bottom roller forming machine (12 stands) - Rolling conveyor - Entry line operator desk 3. Panel Formation Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Discharge roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor Godevtpciepfx Afqsbg - Packing section - Polystyrene spacer feeding system - Entry conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roller forming tools - Lower roller forming tools 6. List of Additional Machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Stanje: dober (rabljeno), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Gjdpod Tx Ahjfx Afqsbg

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel Gsdsgp Diaopfx Afqebg - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel Gjdpocggy Sjfx Afqobg - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Performance: 225 t/24h, mold carriers: 42, mixing positions for additive blending: 10, mixing head type: MQ, max. working pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid fill foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Godpfx Asttbd Nsfqsbg

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE Gedpjff R Tqefx Afqsbg RETURN DEVICE for Edge Banding Machine (LEFT) In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor belt (9080 x 1560 mm) Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: dober (rabljeno), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH FEED CONVEYOR AND OUTFEED CONVEYOR Godpfx Afovtx Hkoqjbg OSAMA GLUING MACHINE TYPE S4R/P-1400, 4 ROLLERS

Stanje: dober (rabljeno), Roller conveyors and chain conveyors Gjdped Sf Rqofx Afqjbg

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) Gbodpfxsd Rg Dpe Afqog No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW