UV sušilnik

Cefla FV 2 / 3500-46 SERTARE UVR2M

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 16 A, vrsta vhodnega toka: trifazni, volumenski pretok: 6.000 m³/h, premer sesalne cevi: 300 mm, skupna višina: 2.000 mm, skupna dolžina: 3.100 mm, skupna širina: 900 mm, skupna masa: 925 kg, priključek za stisnjen zrak: 6 letvica, nazivni pretok: 5.100 m³/h, negativen tlak: 2.700 Pa, Tehnični podatki: Sesalni nastavek, premer (D) = 300 mm Vsebnost ostankov prahu < 0,1 mg/m³ H3 Površina filtra 28 m² Hnodpfx Ageyi Efcj Aeu Čiščenje s stisnjenim zrakom Volumski pretok 6000 m³/h Podtlak 2500 Pa Nivo zvočnega tlaka 72 dB(A) Motor ventilatorja 7,5 kW, 400 V, 50 Hz Način delovanja: neprekinjeno Volumen posode za zbiranje ostankov 3 x 165 l Teža pribl. 1000 kg Dimenzije (D x Š x V v mm) 3070 x 900 x 1950 Obseg dobave: - Ohišje, odporno na udare s tlakom nad 200 mbar, - podvozje, - 3 posode za zbiranje pri modelu SMU 6000.1, - ločevalnik z filtrom, - modul ventilatorja z izpustnim kanalom, - čiščenje s stisnjenim zrakom ali vibracijsko čiščenje, - ohišje z glavnim stikalom, motorjem in avtomatskim zagonom, - vgrajen avtomatski sistem za gašenje, - avtomatski sprožilec za čiščenje in vgrajen nadzor filtra z opozorilno lučko, - 5 m priključni kabel s 32 A CEE vtičnico, - vtič za napravo z stikalom za preklop faz, vključno s frekvenčnim pretvornikom. preverjeno v delavnici

Stanje: novo, HIGH PERFORMANCE – BUILT FOR THE PROCESSING OF SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main Features: - 40+ pre-installed FEFCO styles, 100+ available box designs - One-pass operation for seamless carton production - Supports single wall, double wall, and high-strength board - Processes sheet and zig-zag (Leporello) board - Integrated die-cutting system - Fast tool changeover – less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single pass - Removable feeder (compatible with manual or vacuum feeding) - Remote diagnostics and updates via integrated VPN connection _____ Optional Features and Upgrades: - Gluing system – synchronized cold glue applicator unit - miniFLEXO – compact single-color flexo printer - Flexomat – full-format flexo printer - Vacuum feeding system – compensates for board curvature - 3D scanner – automatic product scanning and data input - Automatic carton folding system Hnjdpfjwrrfcjx Ag Aeu - Fully automatic production line _____ Technical Data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 cartons per hour - Maximum carton size: 2400 mm (94") width x 9999 mm (394") length - Minimum carton size: 250 mm (10") width x 750 mm (30") - Slot width: ~7–8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, please contact us – we are happy to assist you.

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Hnodjwqdbmjpfx Ag Aju Delovna miza: fiksna višina Podtlak preproga: da Število delovnih agregatov: 4 kos

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system Hnsdsl Uyfkepfx Ag Aou - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Used, untested robot. No teach pendant. Not tested. Hodpfx Agsgu U Itj Aonu

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Hnedpfx Ajw Naanog Aju Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: rabljeno, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed rollers (top): 5 Number of rubber feed rollers (top): 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via drive shafts (cardan shafts) Table lubrication pump Hnedpfx Agjmiik Ts Aou Operating pressure: 6 bar Electric height adjustment of the machine frame Power supply: 400 V Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.500 mm, skupna širina: 3.375 mm, WEIMA drobilnik Serija HWV 3000 (37 kW) in enovretenski drobilnik WL12 (30 kW) Idealno za predhodno drobljenje lesnih odpadkov, kot so palete, sledeno z ločevanjem kovin in nadaljnjim drobljenjem. Prednosti: Dvostopenjski proces: Pred- in naknadno drobljenje za maksimalno učinkovitost. Vsestranska uporaba: Lesni sekanci za ogrevalne sisteme ali briketirne preše. Tiho delovanje. Tehnične podrobnosti – HWV 3000: - Moč: 37 kW - Dimenzije (lijak): 3375 mm širina x 1630 mm višina Hjdpfjy Ubvpjx Ag Asnu - Rezila: 58 nožev v dveh vrstah Tehnične podrobnosti – WL12/30: - Moč: 30 kW - Premer gredi: 368 mm - Sito: 15/20 mm Možnosti uporabe - Predelava in recikliranje lesnih odpadkov - Pridobivanje energije z lesnimi sekanci ali briketiranjem

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Hjdpovllxdjfx Ag Aonu Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) Hjdpfx Aogwbbqeg Aenu No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)