Biesse Fse nakup rabljenega (318)

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) Iajdpfet N Ix Rex Abxsu mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 Ijdpfshvah Nex Abxjau F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Iasdpfx Abeihfiisxsu Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Revolver type, magazine positions: 10 tool slots

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) Ijdpfxow Ug A Ho Abxsau - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW.

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel insertion Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Powered roller conveyor "RBO" with 90° workpiece rotation unit Iaedpfeyhqa Asx Abxsu B) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool magazine with 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) C) Transfer connection with turner (180° overturn, top side down) "RBO" Ribaltatore D) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal drilling units (1 right + 1 left) with 4 heads each with 18 spindles (36R+36L), total 72 Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit 2 horizontal boring units (1 right + 1 left) each with 5 insertion nozzles (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Iajdsukhd Aopfx Abxou No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); Iedpjt Ig A Sofx Abxeau - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: Iedpfxevnq Txo Abxeau W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Iajdoidqd Tjpfx Abxeu Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Iedpfx Aboidqf Rexjau Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) Isdpfsu Rc Anjx Abxoau End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) Iaodeu Rc Hyepfx Abxsu EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 Iedpfxji D D Tfo Abxjau The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps Iaodpfxehvi Dus Abxsu CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen Iaedpfoidmkrjx Abxeu KZ2047) Übergabestation mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabestation mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)

Stanje: zelo dobro (rabljeno), Spalt- und Nutmaschine (gebraucht zum Nuten und/oder zum Teilen eines einzelnen Paneels in zwei Teile) - Minimale Werkstücklänge: ca. 250 mm - Maximale Werkstücklänge: ca. 2.700 mm - Minimale Werkstückbreite: ca. 124 mm - Maximale Werkstückbreite: ca. 1.200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Max. Vorschubgeschwindigkeit: ca. 50 m/min - Installierte Gesamtleistung: 82 kW Mit folgenden Aggregaten: POS. 1 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 5 Untere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm Iaedpfxsyx S N Uj Abxsu POS. 6 Obere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm OPTIONAL: Schalldämm- und Schutzeinhausung (Kabine)

Stanje: rabljeno, številka stroja/vozila: 008414, Delovno območje os X: 3140 mm Delovno območje os Y: 1500 mm Delovna površina: Z vakuumskimi konzolnimi podporniki Moč glavnega vretena: 13 kW Iasdpfx Absywafhoxju Število krmiljenih osi: 5 osi Število orodnih mest: 13

Stanje: rabljeno, številka stroja/vozila: 008113, Maks. širina panela: 3800 mm Iaedpfsw Iddhex Abxsu Maks. dolžina panela: 3200 mm Maks. izteg glavnega žaginega lista: 75 mm Število vpenjalnih klešč: 8

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. Ijdpfx Absw Rpd Sexeau -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 5.900 mm, pomik osi Y: 1.560 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 60 m/min, največja hitrost vrtenja: 20.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Iaodpfx Absyxm Swexju Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X direction): 6 Horizontal drilling spindles (Y direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0006888 - Manufacturer Code: C0151A07 - Condition: Used - Functionality: Fully operational - Weight: 25KG - Dimensions: 70X46X34 cm - If interested, we offer an overhaul service. Please contact us. Iasdpfeu H H Erjx Abxeu

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Komponente ADVANTAGE C prečni podajalnik: avtomatski ROTACIJSKA NAPRAVA (flipar): na voljo BIESSE FTT: s 4 glavami, vrtanje in rezkanje, avtomatska menjava orodij BIESSE FHT: 2 DELOVNI ENOTI za vodoravno vrtanje in vstavljanje moznikov WANDRES: krtačno čiščenje od zgoraj ADVANTAGE SC prečni odvzemnik: avtomatski Dimenzije plošč Dolžina plošče: 240 – 3.200 mm Širina posamezne plošče: 140 – 1.550 mm Širina plošče: 140 – 800 mm Debelina plošče: 12 – 60 mm Vrtalne enote Vrtalne glave FTT 800: 2 obdelovalna centra s 4 vrtalnimi enotami – 5 delovnih miz Navpična vretena (v smeri X): 14 neodvisnih na glavo Iodjy Ui Rnspfx Abxoau Navpična vretena (v smeri Y): 18 neodvisnih na glavo Vodoravna vretena (v smeri X): 3 neodvisna, z dvojnim izhodom Vodoravna vretena (v smeri Y): 3 neodvisna, z dvojnim izhodom Sistem menjalnika orodij Revolverski nosilci: 2 Pozicij v kaseti: 56 Uporaba: Avtomatska menjava orodij navpičnih vreten na 4 vrtalnih enotah dveh obdelovalnih centrov A in B. Rezkalna vretena Elektro vreteno 1: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Elektro vreteno 2: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Lateralne pozicionirne enote Delovna mesta: 2 za vzporedno obdelavo identičnih ali zrcalno obrnjenih plošč Levi pozicionirni element: fiksiran za bočno referenco Desni pozicionirni element: pomičen v smeri X, na spodnjih nosilcih, linearno voden Nastavljanje: avtomatsko glede na X-dimenzijo plošče Pogon: brezkrtačni motor z digitalnim nadzorom Funkcija: zaznavanje dejanske dolžine X v obdelovalnem centru, avtomatska korekcija vrtalnih pozicij Maks. hitrost premika: 120 m/min Nakladanje in razkladanje Vhodni sistem: 1 pasovni transporter s prečnim dovodom, lasten pogon Izhodni sistem: 1 pasovni transporter s prečnim izhodom, lasten pogon Dodatno: čistilni ventilator v območju izhoda Vrtalne glave FHT (vodoravne): Obdelovalni centri z 2 delovnima enotama (1 LH / 1 RH enota) – 3 delovne mize. VODORAVNE VRTALNE ENOTE s 24 neodvisnimi vreteni za montažo na 2 delovni enoti VODORAVNE VSTAVITVENE ENOTE Z 5+5 APLIKATORJI LEPILA IN VLOŽKI ZA MOZNIKE PREMERA 8 mm DRŽALO ZA ORODJA za hitro menjavo vreten vrtalnih enot ENOTA ZA VBRIZGAVANJE LEPILA IN VSTAVLJANJE MOZNIH 8 mm: za vgradnjo moznikov premera 8 mm in dolžine 25-35 mm (enota je predpripravljena za te dimenzije). Potrebne so enote za vstavljanje moznikov premera 8 mm. OPOMBA: Enota za vstavljanje moznikov ni bila nikoli uporabljena in ni testirana. Preskus ni mogoč. ADVANTAGE C 3200 TRASV. 1 POS – nakladanje ADVANTAGE SC 3200 TRASV. 1 POS – razkladanje Varnostne lastnosti Standardi: CE skladni Varnostna oprema: obsežna zaščitna ohišja

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Iaedpfxjyxndbo Abxeu Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000007687, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 60 mm, skupna širina: 4.400 mm, skupna dolžina: 7.290 mm, moč: 20 kW (27,19 KM), največja hitrost vrtenja: 18.000 obr/min, Popolnoma delujoč. Še vedno v uporabi. Iaodpfxsx I A A Rs Abxou

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, agregat za predhodno rezkanje lepilna postaja za granulat maksimalna delovna višina 60 mm giljotina za rezanje robnega traku z role agregat za natančno odrezovanje robnega traku agregat za rezkanje presežka robnega traku z zgornje in spodnje strani obdelovanca Iodpfx Ajynizljbxoau profilni strgalo ravno strgalo polirni agregati dolžina stroja 420 cm leto izdelave 2014 teža 1200 kg CE oznaka