Biesse Edge nakup rabljenega (327)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljen BIESSE Rover A - Nesting CNC - Letnik: 2016 - Na voljo od novembra 2025 Kedpjxhcndjfx Ah Donc - Dodatne fotografije in video so na voljo

Stanje: rabljeno, Leto izdelave: 2003, BIESSE FDT THROUGH-FEED BORING MACHINE price: €20,000 / net Working field along axis "X": max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling units, 11 spindles per unit, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling units with 11 spindles, 32 mm pitch, quick-change system, without chucks. Each unit is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front drilling units (Y1) along screw guide via Ksdpfx Ahswpq Hme Donc handwheel for precise adjustment. • Pneumatic stroke activation with scale for manual depth setting. • Switch for manual stroke operation. • Pneumatic adjustment of drilling speed. • Max distance between first and last spindle on horizontal head: 704 mm • Max stroke of horizontal head on "Z" axis: 5–40 mm 5 pcs lower vertical heads Width 96 mm with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Quick-change device for drilling units, with 90° rotation. • Quick positioning of heads along the beam (X axis) through rack guide, gear wheel and position encoder; 2 roller guides; mechanical locking, pneumatic unlocking. • Quick positioning of each drilling unit in the transverse direction (Y axis) via ball screw and position encoder; 1 roller guide; mechanical locking – pneumatic unlocking. • Electronic activation via brushless servomotor; drilling parameter control via NC.

Stanje: rabljeno, Leto izdelave: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm Y-axis: 628 mm Z-axis: 90 mm Max. programmable feed speed: X-axis: 100 m/min Y-axis: 75 m/min Z-axis: 15 m/min Drill holder: 10 mm diameter Kodpfxowwnf No Ah Dsnc Spindle speeds: 4000 rpm Groove saw: 120 mm diameter Drilling spindles: 4 horizontal spindles on X-axis 12 vertical spindles on the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum pump capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Location: Röllbach

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: Knjdpsw Uhbkefx Ah Dec O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction PC control, type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: rabljeno, številka stroja/vozila: 006163, Max. panel width: 3200 mm Number of units: 3 Number of injectors: 6 Knsdpsiwpt Ujfx Ah Doc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Splošni podatki Teža stroja: 1590 kg Dodatna oprema Pnevmatski izbor pozicije valja / Ročno nastavljanje plošče z lestvico / Avtomatska nastavitev debeline z digitalnim prikazom delovne višine / Stiskalni valj / Zračni čistilniki na glavi mize za čiščenje in hlajenje traku / Dvojni merilniki obremenitve / Dodatna vhodna in izhodna podaljšana miza z valji Zahteve za zrak: 6 barov Kodpfxow Ntf Rj Ah Dsnc Ta tračni brusilnik BIESSE Levia 110 je bil izdelan leta 2005. Omogoča maksimalno delovno širino 43 palcev in dimenzijo traku 44" x 85". Opremljen je s kovinskim kontaktnim valjem in gumiranim valjem, kar zagotavlja natančno brušenje. Stroj vključuje avtomatsko nastavitev debeline z digitalnim prikazom ter frekvenčnik za optimalen nadzor hitrosti. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Brušenje

Stanje: rabljeno, Leto izdelave: 2020, CNC control with Sintra software, panel height: 60 mm, solid wood: 8 mm, PVC/ABS: 0.4–3 mm, feed speed: 12 m/min. Adjustable infeed guide, side roller conveyor with return rollers for panel support, precision unit, roller holder plate, gluing unit for EVA hot melt adhesive and glue pot, end trimming unit with 2 motors, bevel trimming unit with 2 tilting motors, multifunctional corner/unit with 2 motors (corner rounding + edge rounding), edge scraper unit, brushing unit. TECHNICAL DATA TO BE VERIFIED. Kjdpow Ew Ddofx Ah Denc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: AGG0056 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: CNC BIESSE ROVER - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Teža in dimenzije za transport: 4 kg, 36x26x21 cm. Ksdpfx Ahsvu Aqie Djnc

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) Knedpfew Ug A Hsx Ah Djc - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW.

Stanje: rabljeno, Numerical control XP 600 with Biesse Works software Working area in X-axis: 3000 mm Knsdpfx Ahouickys Djc Working area in Y-axis: 1000 mm Working area in Z-axis: 60 mm Automatic loading system with motorized belt transfer No. 2 clamps for securing and transporting panels No. 1+1 vertical electrospindle, 3 axes (top + bottom) No. 1+1 independent saw blade (top + bottom) No. 29+29 independent spindles for vertical drilling in 'X and Y' direction (top + bottom) No. 10+10 independent spindles for horizontal drilling in 'X and Y' direction (top + bottom) Automatic unloading system with motorized belt transfer

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software – 3D CAD/CAM program for designing, simulating, and managing processes. Machining of machining centers and drilling machines by Biesse. BNest software – software module for processing in nesting mode, allowing you to create projects. Includes a list of items with required production quantities and a list of sheets to be used, with the aim of minimizing material usage and machining times. Knsdpot Ul Dnofx Ah Djc Working area in X-axis: 4,300 mm Working area in Y-axis: 2,200 mm Number of working fields: 2 Nesting worktable Automatic loading system with side lift table Panel separation system with 2 suction cups No. 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool changer, HSK cone type Automatic tool changer system with 16 positions – located at the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - 5 vertical in X-axis - 5 vertical in Y-axis Automatic unloading system with motorized conveyor belt Worktable cleaning system Printing and application system for adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter fences Safety system with bumpers Automatic lubrication system Air conditioning system for cooling and cleaning machine control unit No. 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Kjdokvrxuspfx Ah Donc Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each Kjdpjwt Snyefx Ah Dsnc

Stanje: rabljeno, Leto izdelave: 2013, Touch panel operation Panel height 60 mm solid, 15 mm PVC/ABS, 3 mm Variable feed speed Working height electronically adjustable via CNC Adjustable panel support guide Side roller track with return rollers for panel support Knsdpfewwkyijx Ah Dec Anti-stick unit 2-motor rectifier unit Lamps for edge heating Roller holder plate Gluing unit for EVA hot-melt adhesive Gluing unit with AFS (Air Force System) Edge pressure unit for straight profiles with adjustable pressure rollers End trimming unit with 2 motors Bevel unit with 2 pivoting motors Multifunctional 2-motor rounding unit (corner rounding + profiling) Edge scraper Glue scraper Brushing unit

Stanje: rabljeno, Leto izdelave: 2022, Smart Touch numerical control with Sintra HD software Panel height mm 10 - 60 Solid wood 22 mm PVC/ABS mm 3 Feed speed up to 25 m/min Electronically adjustable working height via CNC Motorized pressure belt with higher pressure Motorized and electronically adjustable panel support guide via CNC Air cushion table for panel infeed Side roller conveyor with idler rollers for panel support Anti-adhesion unit Rectifier unit with 2 electronically controllable motors via CNC AdIRL-700 heating lamps for panel edges Roll holder plate with single position Glue unit for EVA hotmelt glue with glue pot and pre-melter Edge pressure group for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 IT 70 P motors Overlapping trimming group with 2 motors Offset edge milling unit with 2 motors, electronically adjustable via CNC Anti-adhesion group Corner rounding unit with 2 multifunction motors (corner tool + rounding tool) Anti-adhesive liquid application system Electronic edge scraper group electronically adjustable via NC Glue scraper group Kodew Eawtspfx Ah Djnc 0-90° tiltable router unit Brush group Total weight 3800 kg Total installed power KW 27 TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting Knedpfx Aew D Dhaeh Dsc 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2017, Osi Plus numerical control QUICK OPTI software for pattern cutting optimization directly at the machine, OPTIPLANNING cutting optimization software PROFESSIONAL version, barcode label printer - OS-Labelling add-on key for office programming software, electrical cabinet climate control, cutting length 4400 mm, cutting width 4300 mm, blade protrusion 90 mm, manual loading of the front panel, integrated lateral aligner in blade carriage, no. 1 fixed front Bakelite table with air cushion system for unloading panels (2050 x 850 mm), no. 3 adjustable front Bakelite tables with air cushion system for unloading panels (2050 x 650 mm), main saw unit (max. blade diameter / power) 355 mm / 11 kW, scoring unit (max. blade diameter / power) 200 mm / 2.2 kW, adjustable blade carriage speed, sliding carriage with 9 grippers, blade carriage speed 120 m/min, Twin Pusher 1.2 system with 1 additional gripper on the pusher carriage (position 570 mm) for simultaneous cutting of different patterns. TECHNICAL DETAILS NEED TO BE VERIFIED. Ksdpjvtbzkjfx Ah Djnc

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Knodpewufv Tofx Ah Dec

Stanje: rabljeno, Numerical control XNC Working area on X-axis: 3400 mm Working area on Y-axis: 1300 mm Stroke in Z-axis: 155 mm Number of work zones: 2 Bar worktable 8 manually adjustable bars for suction cup holders, each with a display showing the working height 8 pneumatic Bakelite bars for lifting the panel Each bar equipped with 3 manually adjustable suction cups with vacuum seal for securing the panel during processing 1 vertical electrospindle with C-axis, Vector type, with automatic tool changer, ISO 30 taper, flange for aggregate use Automatic tool change system with 3 positions for side-mounted aggregates Automatic tool change system with 20 positions and chain Drilling head with the following configuration: Knsdev Edggspfx Ah Doc - 10 vertical spindles on the X-axis - 12 vertical spindles on the Y-axis - 6 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis Front carpet safety system and perimeter safety fence Motorized conveyor carpet for chip extraction Vacuum pump

Stanje: rabljeno, Leto izdelave: 2017, Osi Plus numerical control, QUICK OPTI software for pattern cutting optimization directly at the machine, OPTIPLANNING pattern optimization software PROFESSIONAL version, barcode label printer - OS-Labelling, electrical cabinet air conditioning, cutting length 4400 mm, cutting width 4300 mm, blade extension 75 mm, manual front panel loading, integrated lateral aligner in blade carriage, no. 1 fixed front Bakelite table with air cushion system for unloading panels (2050 x 850 mm), no. 3 adjustable front Bakelite tables with air cushion system for unloading panels (2050 x 650 mm), main saw blade assembly (max. blade diameter / power) 355 mm / 7.5 kW, scoring saw unit (max. blade diameter / power) 200 mm / 2.2 kW, adjustable carriage speed, pusher carriage with 10 clamps, saw carriage speed 1-120 m/min, pusher speed 60 m/min, Twin Pusher 1.2 system with 1 additional gripper on pusher carriage (position 570 mm) for simultaneously executing different patterns, TECHNICAL DETAILS TO BE VERIFIED Knjdpfsv Amx Tex Ah Doc

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software Working area X-axis: 3600 mm Working area Y-axis: 1800 mm Number of working fields: 2 Stackable worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel separation system with suction cups 1 three-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 taper Automatic tool changer with 16 positions – located at the rear of the machine Automatic tool changer with 8 positions – on the machine Drilling unit BH 10 with 10 spindles arranged as follows: - 15 vertical spindles on the X-axis - 17 vertical spindles on the Y-axis Automatic unloading system with motorized conveyor belt Workpiece cleaning system Protective and safety system with perimeter fences Safety system with bumper Automatic lubrication system Air conditioning unit for cooling and cleaning the machine control cabinet Kedpsqvt D Refx Ah Dsnc 250 m3/h vacuum pumps

Stanje: rabljeno, Numerical control with BSolid software – BSuite3. The working area on the X-axis is 2500 mm, working area on the Y-axis is 900 mm, and working area on the Z-axis is 60 mm. Equipped with automatic unloading device. No. 1 three-axis vertical electrospindle with automatic tool changer, ISO 30 cone type. Tool changer with 8 positions. Drilling head with 17 spindles, arranged as follows: - 6 vertical on the X-axis, - 5 vertical on the Y-axis, - 4 horizontal on the X-axis, and - 2 horizontal on the Y-axis. Integrated saw blade for producing grooves. Safety and protection system for the front mat. Perimeter safety fence. TECHNICAL DETAILS TO BE VERIFIED. Knsdpew Db H Hsfx Ah Dsc

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. Kedsw D E A Ejpfx Ah Djnc bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: rabljeno, Leto izdelave: 2023, Numerical control BH 660 with BSolid Knsdpfxjwgc D Es Ah Dsc Working range on the X-axis: 4320 mm Working range on the Y-axis: 1660 mm Working range on the Z-axis: 200 mm No. 2 working zones on the X-axis Bar working table No. 8 adjustable bars for suction cup holders No. 8 pneumatic Bakelite bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal to secure the panel during processing No. 1 5-axis vertical electrospindle with automatic tool change, liquid cooling, HSK63 type taper, 13 kW (17.4 HP) Automatic tool change system with 16 positions, carousel type, along the X-axis at the rear of the machine Automatic tool magazine with 12 places on the side of the machine Drilling head BH24 L with the following spindle configuration: - No. 8 vertical spindles on the X-axis - No. 6 vertical spindles on the Y-axis - No. 6 horizontal spindles on the X-axis - No. 4 horizontal spindles on the Y-axis - No. 1 integrated saw blade for grooving Chip removal system with motorized conveyor belt Front carpet protection and safety system Automatic lubrication system Air conditioning for cooling and cleaning the machine control unit 250 m³/h vacuum pump TECHNICAL SPECIFICATIONS TO BE VERIFIED

Stanje: rabljeno, Numerical control XP 600 with Biesse Works software Working area in X-axis: 3000 mm Working area in Y-axis: 1000 mm Working area in Z-axis: 60 mm Kedspp Thnjpfx Ah Dsnc Automatic loading system with motorized belt transfer No. 2 clamps for securing and transporting panels No. 1+1 vertical electrospindle, 3 axes (top + bottom) No. 1+1 independent saw blade (top + bottom) No. 29+29 independent spindles for vertical drilling in 'X and Y' direction (top + bottom) No. 10+10 independent spindles for horizontal drilling in 'X and Y' direction (top + bottom) Automatic unloading system with motorized belt transfer