Bernardo Dc 400 nakup rabljenega (193)

Stanje: novo, Turning length 1500 mm Turning diameter 560 mm Turning diameter over support 350 mm Spindle speeds 25-220/220-1500 rpm Swing diameter over bed saddle 350 mm Turning diameter in gap 785 mm Tailstock quill travel 185 mm Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Tailstock quill: MT 5 Hodpfjxaau Ejx Ah Donu Machine weight approx. 2420 kg Dimensions L-W-H 2840 x 1150 x 1610 mm Description: - Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant spindle speed under load - Infinitely variable speed control; set speed is displayed digitally - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - Removable bridge allows machining of workpieces with large diameters - Standard with rapid traverse (longitudinal and cross) for reduced non-productive times - Modern main spindle bearing with precision angular contact ball bearings - One-piece cast machine bed, highly torsion-resistant and low in vibration - Tailstock offset for taper turning - Central lubrication for the bed carriage Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest – max. passage diameter 180 mm - Travelling steady rest – max. passage diameter 120 mm - Foot pedal with brake function according to CE - Safety guard on quick-change toolpost - LED machine lamp - Initial fill with Shell Tellus 46 - Face plate 450 mm - 2 center points - Frequency inverter - Digital speed display - Slip clutch - Rapid traverse longitudinal and cross - Coolant system - Quick-change toolpost with 4 holders - Change gears - Reducing sleeve - Chip guard/rear wall - Operating tools

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via parallelogram linkage Hnjdpfx Ajwzzyuoh Dou Both jointer tables are equipped with noise-dampening table lips Precision ball-bearing cutter block with reversible knives Thicknessing table with central column guide and support Adjustable helical infeed roller for optimal planing results Technical data: Jointing width: 410 mm Table length: 1800 mm Table height: 850 mm Cutter block speed: 4,500 rpm 4-knife cutter block Cutter block diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. depth of cut: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Clearance min./max.: 3 - 225 mm Max. depth of cut: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space requirement: 1800 x 850 mm Availability: short-term Location: Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Width: 1860 mm, Depth: 800 mm, Height: 1900 mm, Weight: approx. 2.3 t. Rectangular notcher: 57 x 100 mm, Triangular notcher: 5 x 5 x 7.5 mm. Notching station width: 330 mm, Working height: 915 mm. Hnjdpfsrxflcjx Ah Dsu

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 1.030 kg, največja hitrost vrtenja: 2.500 obr/min, premer struženja nad prečnim suportom: 320 mm, prehod palice: 56 mm, moč vretenovega motorja: 3.700 W, montažni premer: 16 mm, izvrtina vretena: 56 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 150 obr/min, stružna dolžina: 750 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Specifications Distance between centers 750 mm Center height 160 mm Swing diameter over bed 320 mm Swing diameter over cross slide 150 mm Bed width 215 mm Spindle bore 56 mm Spindle mount A2-5 Stepless speed range 150 - 2500 rpm Travel X-axis / Z-axis 160 mm / 750 mm Rapid traverse X- / Z-axis 4 / 7 m/min Number of tool stations 6 pcs. Tool shank dimension 16 x 16 mm Positioning accuracy Hnedewh Aiwopfx Ah Dsu ± 0.01 mm Quill diameter 45 mm Quill travel 100 mm Quill taper MK 4 Motor power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Weight approx. 1030 kg

Stanje: novo, Sheet metal width: 1020 mm Sheet thickness: 2.0 mm Opening width: 48 mm Max. bending angle: 0 - 135° Working height: 900 mm Total required power: manual operation Machine weight: approx. 285 kg Space requirement: approx. 1350 x 820 x 1140 mm Features: - Segmented upper and bending beam for a wide range of bending applications - Clamping by means of foot pedal - Hands remain free for optimal positioning of the sheet - Versatile bending machine suitable for tinsmiths and repair shops - Robust construction with modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options Hjdpfoxaaufsx Ah Djnu - Excellent price-performance ratio - Fast and easy bending process via bow handle - Slip-resistant rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to suit the respective sheet thickness - High upper beam for manufacturing high-flanged profiles Scope of delivery: - Segmented upper beam - Segmented lower beam - Manual rear gauge - Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Stanje: novo, Sheet width: 2065 mm Sheet thickness: 1.20 mm Opening width: 30.0 mm Max. bending angle: 0 - 135° Total power requirement: manual Machine weight: approx. 500 kg Space required: approx. 2400 x 1115 x 1150 mm - Versatile bending machine suitable for metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam via foot pedal, leaving hands free to handle the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide variety of bending options - Auxiliary cylinder supports the folding process during edging - Fast and simple bending process via Bow handle - Easy adjustment of the lower beam according to sheet thickness - High upper beam suitable for manufacturing profiles with high upturned edges Equipment: - Segmented upper beam - Backgauge - Bending segments: 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Hnjdpfx Asxaat Ijh Dju

Stanje: novo, Belt width: 75.0 mm Belt length: 2000 mm Belt speed: 14.5 + 29 m/sec Grinding area: 460 x 75 mm, flat table Extraction nozzle diameter: 100 mm Total power requirement: 3.0 kW, 100% duty cycle Machine weight: approx. 67.0 kg Hjdpfx Ahsxaarqe Dsnu Dimensions (LxWxH): 1080 x 440 x 1000 mm Standard features with 2 speeds, ideal for stainless steel grinding Features - High grinding performance due to high belt speed - Quick adjustment for horizontal and angled positions - Continuous flat grinding surface for optimal processing of long workpieces - Consistent belt tension with spring-loaded clamping system - Versatile: suitable for edge, surface, and cylindrical grinding - Includes quick-release system for fast belt changes - Simple parallel belt tracking adjustment via set screw - Graphite-coated grinding plate enhances belt glide properties Scope of delivery - K 80 sanding belt - Foldable safety guard - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate stop button - Machine base

Stanje: novo, Pressure: 20.0 t Stroke: 185 mm Table width: 170 mm Clear width between guides (frame opening): 510 mm Machine weight approx. 112 kg Space requirement approx. 1630 x 560 x 730 mm Features: - Standard with left and right movable pressure cylinder Hsdpfxoxaapcj Ah Donu - For straightening, pressing, bending, assembling of gears, discs, etc. - Standard foot pedal and hydraulic hand pump for piston feed - Standard with support prism for aligning shafts - Standard with automatic piston return via integrated return spring - Height-adjustable press table with locking pin - Large-dimension pressure gauge for reading pressing force - Includes two-stage hydraulic pump - Robust welded steel frame construction

Stanje: novo, Turning length: 1500 mm Swing diameter: 560 mm Swing over cross slide: 350 mm Spindle speed: 25 – 1600 rpm Swing over bed slide: 350 mm Swing diameter in gap: 785 mm Quill stroke: 180 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Quill: 5 MT Machine weight approx. 2,370 kg Dimensions (L x W x H): 2,840 x 1,150 x 1,460 mm Description: - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - Removable bridge section allows machining of large-diameter workpieces - Speed and feed adjustments are designed to be simple, smooth-operating, and precise - Includes 4 adjustable cams for automatic carriage stop - Standard with longitudinal and face rapid traverse to minimize non-productive time - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, providing the essential basis for precise turning Hnjdpfxjxaam Is Ah Dsu - Modern precision angular-contact spindle bearings - Tailstock with fine scale, adjustable for taper turning - Centralized lubrication for carriage Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Faceplate 450 mm - Fixed steady rest – max. Ø 180 mm - Travelling steady rest – max. Ø 120 mm - 2 live centers - Initial fill with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Safety clutch - LED machine lamp - Change gears - Reducing sleeve - Chip guard at rear - Operating tools

Stanje: novo, Sheet width: 2020 mm Sheet thickness: 2.0 mm Opening width: 122 mm with segments Max. bending angle: 0 - 135° Working height: 930 mm Total power requirement: manual operation Machine weight: approx. 1020 kg Space requirements: approx. 2.75 x 0.56 x 1.26 m Features - Segmented upper beam for a wide range of bending operations - Universally applicable folding machine for sheet metal workshops and repair shops - High upper beam for producing tall upstanding profiles - Fast and simple bending operation by means of a bow handle - Easy adjustment of the upper beam for efficient operation - Bending angle setting via scale - Individually removable segments for box bending - Large opening width for processing large workpieces - Sturdy construction in modern design Hnsdpfx Aoxaamhjh Dou Scope of delivery - Segmented upper beam - Bending segments: 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Stanje: novo, Turning length: 1500 mm Swing diameter: 410 mm Swing over cross slide: 255 mm Gap diameter: 580 mm Spindle bore: 52.0 mm Speed range: 30 - 3000 rpm Bed width: 250 mm Spindle mount: 55029 D 1-6 Tailstock taper: MT 4 Quill travel: 120 mm Total power requirement: 5.5 kW Machine weight approx.: 1400 kg Dimensions (L x W x H): 2530 x 1000 x 1450 mm Features - Standard with Delta frequency inverter - High torque at low speed range - Nearly constant speed under load - Infinitely variable speed control - Set speed displayed digitally - Prism bed made of cast iron, inductively hardened and precision-ground - Central, ergonomically arranged feed and thread selection Hnsdsxaaldjpfx Ah Dou - With leadscrew and feed shaft - Modern precision angular contact bearings in main spindle assembly - Supplied with frequency inverter and 3-axis position display as standard - Hardened and ground gears and shafts, including feed gearbox - Simple, smooth and precise speed and feed settings - Adjustable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - Removable bridge for machining workpieces with large diameters Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Face plate 350 mm - Fixed steady rest – max. workpiece diameter 135 mm - Follow steady rest – max. workpiece diameter 65 mm - Foot pedal with brake function (CE compliant) - Four-way tool post - Guard for four-way tool post - Micrometer longitudinal stop - Adjustable revolver stop - Frequency inverter - Filled with Shell Tellus 46 for initial operation - Coolant system - Slip clutch - Thread dial indicator - LED machine light - Change gears - Reducing sleeve - 2 dead centers - Chip guard - Operating tools *Pictures show an identical machine

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle taper ISO 40 ISO Table: 1370 x 300 mm Feed rate: 30–830 / 23–625 mm/min Spindle speed: 45–1660 rpm Spindle-to-table distance: 60–460 mm Rapid traverse Z-axis: 750 mm/min Overhang: 95–575 mm Total power requirement: 3.0 kW Machine weight approx. 1505 kg Dimensions (L x W x H): 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for performing light to medium milling operations. Thanks to its great versatility and simple retooling, it can be efficiently used in workshops for machining small to medium-sized production runs. Special features of this machine include the swiveling worktable, flat guides in the Y and Z axes, and servo drive for feeds and rapid traverse in all axes. - Large-dimension rectangular guides on Y and Z axes ensure increased stability - 8x automatic feeds and rapid traverse in all axes - Driven by servomotor - Universal milling head "Huron" system, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - High running smoothness thanks to ground, oil-bath lubricated gear wheels - Overarm with clearly arranged shift gearbox for spindle speed - Digital position display for X, Y, and Z axes included - Precision surface-ground cross table with T-slots Scope of supply - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed drive for X, Y, and Z axes - Coolant system - Counter bearing Hnsdexaak Tepfx Ah Dsu - Long milling arbor ISO 40 / 27 mm - Combination stub milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for X, Y, and Z axes - Operating tools

Stanje: novo, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed slide 255 mm Turning diameter in gap 580 mm Spindle bore 52.0 mm Speed range 30-550 / 550-3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill stroke 140 mm Total power requirement 5.5 kW Machine weight approx. 1145 kg Dimensions L-W-H 2090 x 1050 x 1600 mm The universal lathe Smart 410 Pro Vario is suitable for performing light and medium-duty turning operations. The basic configuration already includes all essential accessories (3-jaw chuck, steadies, change gears, 3-axis digital readout, etc.), making this machine highly versatile. Furthermore, this model is equipped with a steplessly adjustable spindle speed up to 3000 rpm, allowing optimum adjustment of speed and feed rate to the workpiece. Features - Standard with Delta frequency inverter for high torque at low speeds and almost constant speed under load - Stepless speed control - Speed setting is read on a digital display - Prism bed made of cast iron, induction hardened and precision ground - Central, convenient feed and thread selection with leadscrew and feedscrew - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency inverter and 3-axis digital readout - Hardened and ground gears and shafts, including in the feed gearbox - Simple construction for speed and feed setting, smooth and precise shifting - Adjustable tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - Removable gap bridge allows machining of workpieces with large diameters Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Faceplate 350 mm - Fixed steady rest – maximum through diameter 135 mm Hjdsxaakyspfx Ah Donu - Follow steady rest – maximum through diameter 65 mm - Foot pedal with CE brake function - Four-way toolpost - Safety guard for four-way toolpost - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - Initial fill with Shell Tellus 46 - Coolant system - Slip clutch - Thread dial indicator - LED machine lamp - Change gears - Reducing sleeve - 2x dead centers - Chip guard at rear - Operating tools

Stanje: novo, Turning length 3000 mm Swing diameter 660 mm Swing diameter in the gap 900 mm Swing diameter over cross slide 460 mm Spindle speed 25 – 1600 rpm Quill: 5 MT Quill travel 235 mm Hsdpexaahljfx Ah Dsnu Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Machine weight approx. 3,300 kg Dimensions 4,630 x 1,200 x 1,529 mm Features - Versatile applications in general engineering, production, and single-part manufacturing - Central, easy-to-use feed and threading control with lead and feed screw - Prism bed made of grey cast iron, induction-hardened and precision-ground - Modern main spindle bearing with precision angular contact roller bearings - Hardened and ground gears and shafts, including in the feed gearbox - Rapid traverse for longitudinal and facing operations as standard to reduce idle times - Large spindle bore (105 mm) for machining workpieces with large diameters - Smooth start-up thanks to mechanical multi-disc clutch - Electromechanical foot brake for reducing idle times - Outstanding metal removal rates even for facing operations - The machine bed is reinforced with strong ribs to stiffen the bed guideways and minimize vibration influences Scope of delivery - 3-axis digital readout ES-12 V with LCD display - Overload clutch - Rapid traverse (longitudinal and facing) - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. aperture diameter 180 mm - Travelling steady rest – max. aperture diameter 120 mm - 2 live centers - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety device for quick-change tool post - Change gears - Reducing sleeve - Chip guard/rear panel - Cable routing via energy chain - Operating tools

Stanje: novo, Pass-through width: 580 mm Pass-through height: 615 mm Discs: 570 x 260 mm Air consumption: 400 l/min Air pressure: 2.7 - 5.5 bar Container capacity: 184 liters Air connection: 3/8 inch Weight: 125 kg Dimensions (LxWxH): approx. 1350 x 1300 x 1800 mm Hnedexaagzepfx Ah Dou Equipment: - Working chamber: 1220 x 615 x 580 mm (LxWxH) - Including sandblasting gun (usable grit size 0.149 - 0.250 mm) - Including media container - Including dust extraction unit - Freely movable foot switch - Work area lighting - Operating manual in German

Stanje: novo, Passage width: 820 mm Passage height: 810 mm Air consumption: 680 l/min Air pressure: 8.6 bar Hopper capacity: 148 liters Arm opening diameter: 180 mm Air coupling: 3/8" inch Weight: 160 kg Approx. dimensions (LxWxH): 1350 x 1300 x 1800 mm Equipment: - Working chamber: 1110 x 820 x 810 mm (LxWxH) - Very robust construction Hodpexaaguefx Ah Dsnu - Including sandblasting gun (suitable grit size: 0.149 - 0.250 mm) - Including abrasive container - Including dust extraction system - Freely movable foot switch - Working chamber illumination - Transport dimensions/packed: 1350 x 1000 x 1100 mm - Operating manual in German

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle mount: ISO 40 Table: 1370 x 320 mm Feed rate: Horizontal 80 - 830 / Vertical 23-625 mm/min Spindle speed: Horizontal 35 - 1500 / Vertical 45 - 1660 rpm Distance spindle / table: Horizontal 30 - 430 / Vertical 210-610 mm Rapid traverse Z-axis: 750 mm/min Overhang: 305 - 805 mm T-slots: 3 x 14.0 mm Table - swiveling: ° Max. workpiece weight: 300 kg Coolant pump: 25.0 L/min Total power requirement: 7.6 kW Machine weight approx.: 1540 kg Dimensions (LxWxH): 1840 x 1830 x 2050 mm Hnsdpfxsxaagnj Ah Dou The universal milling machine UWF 130 Servo is a further development of the well-known UWF 130. Thanks to the milling head "HURON", which can be adjusted to any angular position, and a travel of 1000 mm on the x-axis, this machine is highly versatile. A special feature of this model is the rapid traverse and 8-step feeds on all axes, driven by a servomotor ("SERVO" version). - Large-sized rectangular guideways on y- and z-axis for increased stability - 8 automatic feeds and rapid traverse on all axes, driven by servomotor - Universal milling head, Huron system, adjustable to any angle position - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine base for vibration-free operation - High running smoothness due to hardened and oil-bath lubricated gear wheels - Overarm with clearly arranged gearbox for spindle speed adjustment - Digital position indicator for x-, y- and z-axis included as standard - Precision surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed for x-, y-, and z-axis - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x-, y-, and z-axis - Operating tools

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 350 - 1,590 mm Max. workpiece height: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Tapping capacity: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions L-W-H: 2,450 x 980 x 2,840 mm Hnodpfxoxaad Tj Ah Deu Description - Large-size base plate - Ideally suited for machining large workpieces - Thick-walled, ground column for increased slide properties of the arm - Arm and drill head with independent hydraulic clamping - Simple arm height adjustment via lifting motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears running in oil bath - Excellent sliding characteristics of the drill head along the arm due to ground surface Scope of delivery - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial filling with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety cover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Thread cutting: M30 Drilling capacity in steel (diameter): 40.0 mm Workpiece height - max.: 380 - 785 mm Arm reach: 985 mm Spindle taper: MT 4 Drill head tiltable left/right: -80 / +80 degrees Hedpfoxaadyjx Ah Dsnu Table area: 1210 x 520 mm Speed range: 50 - 2000 rpm Column diameter: 220 mm Quill stroke: 200 mm Spindle feed range: 0.08 - 0.5 mm/rev Total power requirement: 2.2 kW Machine weight approx.: 2,800 kg Required space approx.: 2.45 x 1.2 x 2.72 m Features: - Multiple clamping and machining options due to structural design - Electrically operated height adjustment of the drill head without changing the drilling position, ideal for deep hole drilling - Drill head swivels 180°, arm can be moved forwards/backwards and swiveled horizontally - Tapping unit and six automatic feed rates included as standard - Large table area (1195 x 500 mm) allows simultaneous clamping of multiple workpieces - Digital speed and depth displays included in delivery - Quick drill head setup on the workpiece, with hydraulic clamping - Heavily ribbed column ensures high rigidity of the arm - Robust construction guarantees vibration-free operation - Infinitely variable electronic speed control as standard Scope of delivery: - Electromagnetic spindle feed - Digital speed display - Digital drilling depth indicator - Electrically operated drill head adjustment - Initial filling with Shell Tellus 46 - Quick-action drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 4 / B16 - Reduction sleeves MT 4 / 3, 4 / 2, 3 / 1 - Tapping device - LED machine lamp - Coolant system - Height-adjustable safety guard

Stanje: novo, Pipe diameter: 1/2 – 2.0 inches Wall thickness: 2.75 – 4.5 mm steel tubes Pressing force: 10.0 t Machine weight: approx. 46.0 kg - With foldable bending frame for efficient operation - Various bending formers included in the scope of delivery - Universal use for gas, steam, and water pipes - Rapid advance enables fast operation - Equipped with tripod stand for safe working - Also ideal for copper pipes and coated pipes - Bends up to 90° achievable Hjdjxaac Nopfx Ah Denu Equipment: - Bending formers: ½" – ¾" – 1" – 1 ¼" – 1 ½" – 2"

Stanje: novo, Drilling capacity in steel (diameter): 35.0 mm Drilling capacity in cast iron: 40.0 mm Thread cutting M 24 in steel Throat depth: 320 mm Morse taper: 4 MT Quill travel: 160 mm Speed range: 65 - 3,250 rpm Table size: 500 x 420 mm Throat depth: 320 mm Weight: 375 kg Dimensions (L x W x H): 600 x 870 x 2,170 mm Equipment: - Infinitely variable speed control, ideal for - Setting desired cutting speed - Automatic tool ejector and thread cutting attachment included as standard - Electromechanical feed, adjustable from 0.1 - 0.3 mm/rev - Heavy-duty grey cast iron table with rotatable and tiltable work surface - T-slots in the machine base allow clamping of tall workpieces - Guaranteed concentricity ≤ 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth operation - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Key-type drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, MT 4 / 2 - Coolant system - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine lamp - First filling with Shell Tellus 46 Hjdpfx Ahexaabrs Denu - Digital speed display - Height-adjustable safety guard

Stanje: novo, Sheet width: 2020 mm Sheet thickness: 2.0 mm Opening width: 124 mm Max. bending angle: 0 - 135° Working height: 930 mm Total power requirement: manual operation Machine weight: approx. 1,010 kg Space requirement: approx. 2.75 x 0.56 x 1.26 m Features: - Easy-to-operate folding/bending machine - Flat guide for precise upper beam adjustment - Manually adjustable bending angle with scale - Robust welded steel construction designed for heavy-duty operation Hjdpfxexaaano Ah Djnu - Large opening width for processing tall workpieces - Optional rear gauge for serial production - Fast and easy bending process with bow handle - Workpiece clamping via large-dimensioned lever

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Reach: 320 - 1,220 mm Workpiece height - max.: 330 - 1,170 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 1,300 x 980 mm Thread cutting: M42 Quill stroke: 335 mm Total power requirement: 4.0 kW Machine weight approx.: 3,000 kg Dimensions (L x W x H): 2,035 x 1,000 x 2,830 mm Equipment/features: - Large-dimensioned base plate, ideal for machining large workpieces - Thick-walled, ground column for increased sliding properties of the arm - Arm and drilling head with independent hydraulic clamping - Simple height adjustment of the arm via lifting motor - Ideal for drilling, countersinking, reaming, and thread cutting Hnjdpfx Ahjxaaabo Dsu - Hardened and ground gears running in oil bath - Excellent sliding properties of the drilling head on the arm due to ground surface Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety cover

Stanje: novo, Turning length 1000 mm Turning diameter 350 mm Turning diameter in gap 450 mm Spindle bore 40.0 mm Spindle speed 70 - 2000 rpm Bed width 180 mm Spindle mount 55029 D 1-4 Tailstock taper 3 MT Quill travel 110 mm Total power requirement 1.5 kW Machine weight approx. 529 kg Dimensions L-W-H 1730x700x1340 mm Features - Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load - Infinitely variable speed control, set speed is shown on digital display Hnjdpfjw U U R Sex Ah Deu - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing with precision angular contact ball bearings - Single-lever clamp for tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gear head - Optimally suited for machining steel, non-ferrous metals, and plastics - Removable gap bridge for machining workpieces with a large diameter - The solid prism bed is additionally ribbed to minimize vibration influences - Simple, smooth, and precise operation of speed and feed settings Scope of delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Faceplate 200 mm / D4, according to DIN 55029 - Fixed steady rest – max. passage diameter 60 mm - Travelling steady rest – max. passage diameter 60 mm - Clamping plate 250 mm - Four-way tool holder - Shaft locking device - Safety device on tool holder - Slip clutch - Micrometer longitudinal stop - Coolant system - Extendable chip tray - Frequency inverter - Foot pedal with brake function according to CE - Splash guard - Thread dial - LED machine light - Digital speed display - Reducing sleeve - Change gears - 2 centers - Floor stand - Operating tools

Stanje: novo, Drilling capacity in steel (diameter) 32.0 mm Throat depth 230 mm Quill stroke 120 mm Morse taper 3 MT Table: 400x320 mm Speed 105 - 1,725 rpm Total power requirement 1.2 kW Weight 245 kg Hnsdpfxsw U U N Io Ah Dou Dimensions (LxWxH) 470x810x1710 mm Features: - Compact, robust grey cast iron construction in modern design - Infinitely variable speed control - Set speed is displayed digitally - Rack-and-pinion table height adjustment with hand crank - Right- and left-hand spindle rotation for thread cutting - High-torque 2-speed motor, speed range from 105 - 1,725 rpm - Base plate with T-slots for clamping tall workpieces - Safety switch with undervoltage release - Spindle runs in precision ball bearings Scope of delivery: - Keyed drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 3 / B16 - Reducing sleeve MT 3 / 2 - Digital speed display - LED machine lamp - Height-adjustable safety guard