Berger nakup rabljenega (294)

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece spindle headstock for cantilever grinding of heavy workpieces. The machine will undergo major maintenance/partial overhaul including a geometry inspection report according to the Kellenberger new machine guideline. At present, the machine does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). Lajdsv Dxxzopfx Ahusc The required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. Ledpfx Ajvq R Uzjhuoac The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speed: 1500, 1700, 2200 rpm Infeed, step-by-step: 0.001–0.030 mm/Ø Infeed, continuous: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. - between centres (with clamping): 130 kg Lodpfouxftxex Ahusac Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.5 t Space requirements approx.: 4.2 x 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in new-machine quality with warranty, but also offer servicing for your machines, including recently delivered units, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways in the X-axis flat slideway, as well as standard air lift-off in the grinding headstock. - Digital readout on two axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with this spindle) - New, stable internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increasing centre height to max. 225mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. Note: The machine tool currently does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum safety targets must be determined via a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Lodsv I Eq Sepfx Ahusac Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Laedpfx Aovdk N Eshuec Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. Ljdpsuxfucsfx Ahueac - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Laodpfx Aeuxfupehujc Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Ljdet Ii Nbepfx Ahujac Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Laedpet Ii Nuefx Ahuoc Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Lodpfx Ahot Ii Rfoueac Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Ojačano glavno vreteno obdelovanca B-os brezstopenjsko nastavljiva Laodpsxyadajfx Ahuec Kontra-vreteno Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Table swiveling angle: 9 degrees - Universal grinding wheelhead spindle - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180 degrees - Spindle speed: 20 – 400 rpm - Spindle internal taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter centre - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 steady rests with two-point contact - 1 steady rest with three-point contact - 1 set of drivers Laodoxy S A Iepfx Ahujc - Various grinding wheel holders

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.930 kg, Binderberger GI25EZ proline ležeči meterski cepilnik za drva Leto izdelave: 2023 Teža: 1930 kg Pogon: elektrika ali kardanska gred Premičen s spremljevalno tablico do 25 km/h Dolžina cepljenja: 130 cm Hitrost v cm/s: naprej: 25/27, nazaj: 23/25 Lajdpfxoyg I Dpe Ahuec

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, širina na sredini: 600 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 50 mm, odprtina brusnega koluta: 127 mm, Bez cene minimalne – zagotovljena prodaja najvišjemu ponudniku! Motor in frekvenčni pretvornik za obdelovalni vretenasti nasad so bili obnovljeni! Poleg tega sta bila zamenjana električna omarica in električna shema! Laodpfx Aoyu Rd Ishusc TEHNIČNI PODATKI Višina središča: 125 mm (175 mm z dvigi) Razdalja med središči: 600 mm Premer brusne plošče: 400 mm Širina brusne plošče: 50 mm Notranji premer brusne plošče: 127 mm Kotna nastavitev: 270° Hitrost obdelovalnega vretena: 20–400 min⁻¹ Oprimek vretena: 5 MK Oprimek konjička: 3 MK Zasuk mize: 10° Hitrost mize: do 6,0 m/min PODATKI O STROJU Motor za zunanjo brusno ploščo: 4,0 kW Motor za obdelovalno vreteno: 2,2 kW Dimenzije & Teža Dimenzije (D x Š x V): 2.580 x 1.680 x 1.670 mm Teža stroja pribl.: 2.700 kg OPREMA Nova električna omarica in nova električna shema Nov motor in frekvenčni pretvornik za obdelovalni vretenasti nasad 2-osni digitalni prikazovalnik Hladilni rezervoar Geometrija preverjena po Kellenbergerjevem protokolu Obsežna dodatna oprema

Stanje: dober (rabljeno), valjčni brusilni stroj Lodpfetrgukex Ahuoac

Stanje: novo,

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, - Čistilec laserske žlindre za laserske rezalne stroje Laodsx E Srcjpfx Ahuec - 1,1 kW motor - Na voljo je video s prikazom delovanja

Stanje: dober (rabljeno), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (OD x ID x width): 500 x 80 x 203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Workhead spindle taper: MORSE 5 Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Lajdpfxetrgnzs Ahuec Approx. dimensions (L x W): 440 x 370 cm Approx. weight: 4700 kg

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, širina na sredini: 1.500 mm, premer brušenja: 500 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, Stroj bol čiastočne generálne opravený a zahŕňa okrem iného novú geometriu a nový rozvádzač. Ložiská boli vymenené. Lsdpfxoxgrd Ss Ahujac TECHNICKÉ ÚDAJE OBRÁBACÍ PRIESTOR Vzdialenosť medzi hrotmi: 1 500 mm Výška hrotov: 250 mm Max. brúsený priemer: 500 mm Náklon stola: ± 8 ° BRÚSIACA HLAVA Rozmery brúsneho kotúča: 400 x 50 x 127 mm Otáčky vretena: 1 500 / 1 700 / 2 200 ot./min Vnútorný otvor vretena: 90 mm OPRACOVÁVACÍ HROTOVÝ DRŽIAK Orientácia hrotového držiaka: 180 ° Otáčky vretena: 20 - 400 ot./min Kužeľ vretena: Morse 5 KONÍK Kužeľ koníka: Morse 4 Zdvih pinoly koníka: 30 mm DETAILY STROJA POHONY Výkon motora brúsnej hlavy: 3 kW Výkon motora koníka: 0,9 kW ROZMERY STROJA Rozmery: 2 860 x 1 680 x 1 670 mm Hmotnosť: 2 500 kg VYBAVENIE Automatický pracovný cyklus Nádrž na chladivo s čerpadlom Vnútorné brúsiace vreteno Vonkajšie brúsne kotúče Oriezavacie zariadenie Dokumentácia Poznámka: Digitálny ukazovateľ je možné zakúpiť voliteľne za 3 600 €.

Stanje: novo, Leto izdelave: 2026, We offer this new Hartenberger HBS 96 S hydraulic band saw, year of manufacture 2026. Manufacturer: Hartenberger Model: HBS 96 S Hydraulic Year of manufacture: 2026 Condition: new Category ID: 937 Type ID: 1756 Machine type: Band saw for logs BLOCK BAND SAW HBS 96 S with hydraulics, including: kerf calculation system ISP 10, electric guide arm, electromagnetic water valve, hydraulic package Maximum performance for professional wood processing More efficiency. More precision. More output. The HBS 96 S is the ideal band saw for logs for anyone looking to increase their production while achieving top cutting quality. Designed for continuous professional use in sawmills and wood processing operations. Request a non-binding offer now and secure your quote. Why the HBS 96 S is the right choice: ✔ Powerful 11 kW motor – consistent power even with large logs ✔ Fully hydraulic system – less manual work, more productivity and time savings ✔ Electric saw head – precise control, height adjustment and feed at the push of a button ✔ Large cutting capacity for up to Ø 850 mm log diameter ✔ Robust design – for years of use under tough conditions Result: faster processes, less effort, and maximum yield from every log. Technical Data: E-motor: 11 kW Voltage (Three-phase): 400 V 50 Hz Control voltage: 24 V 50 Hz Saw head up/down: electric Saw head feed: electric Laodpey Eq Snofx Ahuec Saw head clearance: 680 mm Saw blade length: 4005 mm Saw blade width: 35 mm Wood dimensions: Max. log Ø: 850 mm Standard length: 4800 mm Hydraulic package: Side support set 2x clamping turners 1x log turner 1x powered balance roller Optional accessories: + Loading arm + Balance roller without drive + Bed extension + Scoring saw + Stationary control panel Dimensions: L/W/H: 6000/2075/1900 mm Weight: approx. 2400 kg Ideal for operations processing large timber! Individually upgradable and virtually unlimited extension possible. Adapt the machine to your requirements: + Bed extension for longer logs + Scoring saw for improved cut quality and longer blade life + Stationary operator panel for enhanced comfort Delivery time: ⏳ 12–14 weeks Who is this saw suitable for? Sawmills Wood processors Contract cutting businesses Professional forestry operations Hunting cooperatives Farmers and more … Increase your productivity now! With the HBS 96 S band saw for logs, you are investing in a machine that quickly pays off – through time savings, higher precision, and maximum performance with minimal maintenance and downtime! Request a quote now or arrange a consultation.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 320 mm, pomik po osi Z: 1.150 mm, proizvajalec krmilnikov: HEIDENHAIN, skupna masa: 6.000 kg, Ta brusilni stroj KELLENBERGER KEL VARIA RS 175/1000 je bil izdelan leta 2004 v Švici. Opremljen je z upravljalnikom HEIDENHAIN. Prednosti stroja Kvalitativne prednosti stroja • Dobro stanje Lsdpfoyi Eliox Ahuoac Tehnične prednosti stroja • Razdalja med konicama: 1000 mm • Višina konice: 175 mm • Dimenzije desnega brusnega koluta Ø 400 x 50 mm • Pomiki glave brusnega koluta -210°/+30° • Hitrost vrtenja: 8-800 min⁻¹ • Tip vretena: CM5

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1916, Binderberger ležeči cepilec 30 t Lajdpfx Ahjyglm Uoujc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 900 mm, TEHNIČNI PODATKI Največja dolžina brušenja: 900 mm Razdalja med centri: 600 mm Višina centrov (standard): 125 mm Višina centrov z vmesnimi bloki na glavi in konjičku: 175 - 250 mm Največji premer nihanja z vmesnimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratnem gibanju mize: 0 - 5 s Premer / širina / odprtina: 250 x 13 x 76 mm Ljdpfx Ahjytf Tbousac Hitrost vretena brusnega kolesa: 360 min⁻¹ Prečni pomik glave brusnega kolesa: 285 mm Hitro pomikanje glave naprej in nazaj: 40 mm Prekinjeno podajanje na eno obrat mize: 0,001 - 0,03 mm Mikrokorektor podajanja, 1 delitev skale: 0,001 mm Delovne hitrosti brezstopenjsko nastavljive (normalno / posebno): 20 - 400 / 10 - 400 min⁻¹ PODROBNOSTI O STROJU Vrsta krmiljenja: konvencionalna

Stanje: rabljeno, Teufelberger Strapping Band 6 x 0.55 PP Strap, 6 x 0.55 Laodpfou Sr E Ijx Ahuoc Dimensions: 6.0 x 0.55 mm Colour: black Width: 6 mm (+0.1 / -0.4) Thickness: 0.55 mm (+0.01 / -0.04) Core diameter: 200 mm Roll width: 190 mm Total length: 5,000 m (+/- 6%) - Weight: Packaging unit: 2 x 5,000 m / box Offer price refers to 1 strap

Stanje: rabljeno, Teufelberger Strapping Band 9 x 0.55 PP Strap, 9 x 0.55 Dimensions: 9.0 x 0.55 mm Colour: black Width: 9 mm (+0.1 / -0.4 mm) Thickness: 0.55 mm (+0.01 / -0.04 mm) Core diameter: 200 mm Roll width: 190 mm Total length: 4,000 m (+/- 6%) Ljdsu Tdwvepfx Ahueac Packaging unit: 2 x 4,000 m per carton Offer price refers to 1 strap