Stroj za brušenje orodja

Schneeberger NORMA CFG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20907, dolžina podajanja os X: 380 mm, dolžina pomika po osi Y: 280 mm, dolžina podajanja os Z: 280 mm, zasukni kot osi A (maks.): 360 °, kot vrtenja osi C (maks.): 340 °, Spindle replaced approx. 6 years ago – only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Grinding Head, Grinding Spindle Spindle type: motorized, swiveling Drive power: 7.5 kW Speed range: 0 – 9,000 rpm Wheel interface: HSK 50 Grinding wheel diameter: 50 – 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel range: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Rotational axis A: infinite Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Mounting taper: ISO 50 Hedpfewi Nc Hjx Abhoh Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Sound level: < 70 dB(A) according to DIN 45 635 Operating hours: approx. 30,000 h / approx. 8,000 h since spindle replacement Power Supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Type: DMR 300 Principle: gear pump Drive: electric motor Voltage: 3 x 230/400 V Tank volume: 11 L Oscillating volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Pneumatics Type: CFG 301 Air consumption (machine): approx. 2,000 l/h Air consumption (measuring system): approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Operating pressure: 6 bar Maintenance: maintenance-free except for filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: gear pump Drive: electric motor Tank pressure: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Hodpow Ucyuefx Abhjh Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Leto izdelave: 2013, BAR AUTOMATIC LATHE TRAUB A 25 Hjdpfxewc Amxo Abheh 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar feeder included!

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Hjdpfx Asrgahxebhjh

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Hjdpoqzkdmjfx Abhsh

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Hsdpfxeu A Dn Ns Abhjh Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway Hedpfxorz Nflo Abhoh - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. Hjdpfx Asl Tn Afsbheh A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 650341, Year 1999 with Fanuc 18 TB - 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410x220x190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1”: R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper mounting: MT5 Reducing sleeve: MT5/MT4 Short outer taper mounting: DIN 55026 / Size 5 Permissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mounting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Wheel data Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left grinding wheel, max.: Ø 500 x 80 mm Right additional wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Hsdpfx Abow T Tb Hohjh Upper table Distance between centers 1000 mm, swiveling 0 to 9° Grinding carriage (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Except for error or omission, technical data is supplied without obligation.

Stanje: rabljeno, Leto izdelave: 2016, Operating hours machine: 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1-15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0-2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - With vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming turning and reworking of parts is eliminated - Thanks to the innovative swivelling station, parts with an edge length of more than 200 mm can also be processed on one side by folding away the station - High degree of automation enables economical and process-safe processing of large quantities of parts - High and consistent processing quality Hodpjv N I Hlofx Abhjh - Dry processing (no chemical additives required, as is the case with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking routes for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and simple tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Lissmac DDE 1500 extraction unit