Barve Spray Pištolo nakup rabljenega (2.346)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, Length 5,000 mm Width 100 mm Height 2,800 mm Year of manufacture 2011 Range+Heine coating system for the finishing of individual wood window parts and frames For sale on behalf of a customer ----- Technical manufacturer description: Workpiece dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with materials specified by the respective paint manufacturer, with a low solvent content (VOC value), water-based, and non-flammable. Capacity: min. 40 carrier bars/shift, approx. 60 window elements/shift (without forced drying) Process (1 cycle runs through twice): - Flood coating - Drying - Inspection / application of joint sealant - Spraying - Drying ----- Pedoy Ty E Hspfx Afajpu Item 1: Conveyor Technology 1 Power + Free circular conveyor Routing according to drawing 11-138-010a Essentially consisting of: 3 drives with geared motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal bends, chains, tensioning stations, pneumatically/electrically controlled stop stations 50 carrier bars, each 5,000 mm long (max. load 250 kg) Automatic tilting of carrier bars in drip section after flood coating unit 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer storage Continuously adjustable drives. 1 lifting and lowering station for loading/unloading workpieces (max. stroke 2,000 mm) 1 set of steel construction for fastening the conveyor system ----- Item 2: Flood Coating Unit 1 flowcomat II-P 1 clear (colourless) priming unit Maximum workpiece width: approx. 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flooding lances, each with max. 3 nozzles installed. 1 accessory kit for cleaning the unit 1 external stainless steel sieve 1 paint supply 1 control unit ----- Item 3: Additions to flood coating unit 1 drip tray and drip area in the evaporation section behind the flood coating unit After flood coating, the carrier bars move into a drip buffer. Dripping coating material is collected on the PP non-stick collecting area (and drip channel) and returned to the flood coating unit. Rinse water is collected and pumped out from within the unit. All paint-contacting areas are made of PP for easy cleaning of dried paint. 1 humidification unit 1 control device for the humidification unit Complete with regulator for humidification volume 1 hygrostat for detecting room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H waco 200 coagulation unit – 200 l collection tank ----- Item 4: Top Coat Spray Booths 2 spray booths for topcoat application 2 extraction walls with sandwich panel cladding for the working area. Fan 16,000 m³/h Filter area: - 3 sets Ecola pre-separators - 1 set Paintstop filter - 1 set pocket filter Recirculation distribution ceiling, clamped in a frame design Air volume 12,000 m³/h Approx. 75% recirculated air – 25% exhaust operation (The exhaust air volume is taken from the factory hall) Installed on a building-side foundation as per layout 2 Prolac overspray recovery towers ----- Item 5: Addition to topcoat spray booths 3 humidification nozzles for the evaporation section after topcoat application ----...

Stanje: zelo dobro (rabljeno), Liebisch SKBWF 1000 A-TR naprava za preizkus korozije Proizvajalec: Gebr. Liebisch GmbH & Co. KG Tip: SKBWF 1000 A-TR Naprava za preizkus korozije / solna pršna komora za preskuse z razprševanjem soli, kondenzacijsko vodo in kombinirane preskuse. Tehnični podatki Prostornina preskusne komore: pribl. 1000 litrov Zunanje mere: pribl. 2600 x 1120 x 1210 mm Notranje mere: pribl. 1535/1425 x 800/780 x 660/650 mm Največja nosilnost vzorcev: 10 kg na nivo Napetost: 400 V Frekvenca: 50 - 60 Hz Faze: 3~ Podpfxozba N Te Afaspu Nazivni tok: 12 A Nazivna moč po tipski tablici: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Rezervoar za preskusno raztopino: pribl. 150 litrov Poraba destilirane vode za vlažilec: pribl. 80 - 120 ml/h Poraba preskusne raztopine: pribl. 0,7 - 1,0 l/h Polnjenje vode v talni koriti: pribl. 15 litrov Preskusni postopki DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Oprema Avtomatsko krmiljenje Touchpanel / upravljalna plošča Preskusna komora iz GFK Rešetke za vzorce Nosilci vzorcev Priključki za temperaturo, vlago, stisnjen zrak in testno raztopino Priklop za NaCl preskusno raztopino Priklop za deionizirano vodo Stanje Rabljena naprava iz industrijske uporabe. Vizualno stanje glede na slike. Ogled možen po dogovoru. Obseg dobave: (glej sliko) Dostava ali pošiljanje s špediterjem možno. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Za dodatna vprašanja smo na voljo po telefonu.

Stanje: dober (rabljeno), Weiss SC 450 naprava za preizkušanje korozije Proizvajalec: Weiss Umwelttechnik GmbH Tip: SC 450 Naprava za preizkušanje korozije / solna razpršilna komora za teste s solno meglo, kondenzacijske preizkuse, preizkušanje korozije, preizkušanje materialov in zagotavljanje kakovosti. Ppodpfx Aszbatrjfasu Tehnični podatki Volumen preizkusne komore: pribl. 480 litrov Višina preizkusne komore s pokrovom: pribl. 1190 mm Višina preizkusne komore brez pokrova: pribl. 740 mm Širina do razpršilnega kanala: pribl. 750 mm Globina: pribl. 570 mm Zunanje dimenzije: Višina s pokrovom: pribl. 1370 mm Višina brez pokrova: pribl. 920 mm Širina: pribl. 1930 mm Globina: pribl. 800 mm Temperaturno območje za solne preizkuse: 5 K nad temperaturo okolice do +50 °C Temperaturno območje za kondenzacijski test: 5 K nad temperaturo okolice do +45 °C Temperaturna konstantnost v času: ±1 K Rezervoar za slanico: pribl. 180 litrov Tlak zraka: min. 4 bar / maks. 10 bar Teža prazne naprave: pribl. 180 kg Električni podatki Napetost: 1/N/PE AC 230 V ±10 % / 50 Hz Nazivna moč: 2 kW Nazivni tok: 8,7 A Oprema Krmiljenje Liebisch / Weiss S!MCON/32 krmilna in regulacijska enota Barvni zaslon na dotik Šoba iz akrilnega stekla v razpršilnem kanalu Ogrevalni vlažilnik stisnjenega zraka Naprava za merjenje pretoka in doziranje slanice Rezervoar za slanico Nosilec za preizkušance / nosilne cevi Talna rešetka Merilni in priključni prehodi Preizkusni postopki Test solne megle po DIN EN ISO 9227 / DIN 50021 Kondenzacijski test po DIN EN ISO 6270-2 / DIN 50017 Stanje Rabljena naprava iz industrijske uporabe. Delovne ure po prikazu: pribl. 37.926,6 h Optično stanje vidno na slikah. Notranjost z vidnimi sledmi uporabe / korozije. Naprava se vklopi, prikazovalnik aktiven. Ogled in testiranje na lokaciji po dogovoru možno. Obseg dobave: glej slike. Pošiljanje ali pošiljanje prek špedicije možno. Spremembe, napake in predprodaja pridržane. Za dodatna vprašanja nas lahko pokličete po telefonu.

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics Ppsdewg R I Ejpfx Afaeu These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: dober (rabljeno), Leto izdelave: 1994, Delovno območje cca 2.080 x 1.430 mm, stranske udarne plošče desno in levo, filtracijska površina cca 1.800 x 1.300 mm, 2 vrsti papirnatih volumenskih filtrov cca 650 x 1.800 mm, notranji fini filter G4 cca 1.350 x 2.000 mm, pretok zraka 4.500 m³/h, maksimalni tlak 500 Pa, motor 1,1 kW / 1.400 o/min. Ppedpfopvil Tex Afaou

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Spray Booth / Paint Booth This Reinox 219×235 spray booth is designed for efficient operation in small to medium-sized workshops. It is suitable for use in explosive atmospheres (EX / ATEX certified). It features a high-performance fan and a three-stage filtration system to ensure a clean and safe working environment, even during frequent use. !! Always delivered as a brand-new machine (Photos show installations at customer sites). We are the manufacturer. !! Technical specifications: - The fan is ATEX Zone 22 certified - Extraction area (inlet): 2,190 × 2,350 mm - Overall dimensions: 2,295 × 2,295 × 810 mm Ppedjia Ta Aepfx Afaju - Fan power: 2.2 kW (EX / ATEX version) - Extraction capacity: 12,000 m³/h (max. 1,100 Pa) - Supply voltage: 400 V (three-phase) Frequency inverter: For stepless fan speed control via potentiometer on the control panel. Filtration: Three-stage air filtration system Certification & documentation: CE, EX / ATEX, complete technical documentation Warranty: 12 months according to the manufacturer's standard !!! Machines available to order in various custom configurations and dimensions !!! Do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2026, We have the following to offer you: TPW1010 Spray Booth Working dimensions (mm): 1000 (width) x 800 (depth) x 1000 (height) Overall dimensions (mm): 1200 (width) x 1200 (depth) x 2200 (height) Standard equipment: • Fan power: 1.5 kW • Capacity: 4500 m³/h • Compression pressure: 930 Pa • Lighting: 2 x 18 W • ATEX explosion-proof fan • 3-stage air filtration • Paint stop filter • Filter nonwoven fabric • IP66 control panel • Hermetically sealed lighting, IP65 rated Our cabins stand out due to their very high build quality, operational safety, and the adaptation of their parameters to your existing facility. We provide advice on the selection of spray booths, dedusting systems, extraction systems, and industrial heat recovery solutions. Podped S N Nasfx Afaopu CHOOSE BUMEX SP. Z O.O. Top-quality machines among those available on the market Professional consultation and service Warranty Warranty and post-warranty service Complete technical documentation 100% customer satisfaction All BUMEX SP. Z O.O. products are CE-certified. We offer our own transport – prices are set individually for each quotation. We issue invoices with indicated VAT. Short delivery times! Possibility to order machines in various, custom configurations and sizes! Please contact us.

Stanje: novo, Leto izdelave: 2026, We offer you: Wall Painting Booth TPW1515 Working dimensions (mm): 1500 (W) x 800 (D) x 1500 (H). Total dimensions (mm): 1800 (W) x 1200 (D) x 2200 (H) Standard equipment: • Fan power: 1.5 kW • Capacity: 8,640 m³/h • Pressure: 930 Pa • Lighting: 2 x 36 W • Explosion-proof fan • 3-stage air filtration • Paint stop filter • Filter fleece • IP 66 control panel • Hermetically sealed lighting IP 65 Our booths stand out due to their very high build quality, operational safety, and the customization of booth parameters to your requirements. We provide expert advice on the selection of spray booths, dedusting systems, extraction systems, and industrial heat recovery units. CHOOSE BUMEX SP. Z O.O. - Very high quality of machines offered on the market - Professional advice and service - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. products are WE-certified. We offer in-house transport – rates are negotiated individually per order. Invoices are issued with shown VAT. Short lead times! Ppedpfx Aeg Sikrefasu Possibility to order machines in various personalized configurations and dimensions! Please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), water-cooled, manually operated DALEX spot welding tongs Type 3218 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN with universal joint suspension and hanging bracket 1 pair of electrode arms, 170 mm throat depth Included: DALEX synchronous welding controller RS 12 Power control via phase angle control Weld time 1-99 cycles, synchronous Pjdpfxef Hi A Eo Afajpu with connecting cable and 32 A CE plug and main switch

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled spot welding gun for industrial use Model: DALEX 3427 D Rated power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN Equipped with double-stroke cylinder – long stroke 62 mm – pre-stroke 40 mm Working stroke with adjustable range: 0–22 mm With cardan suspension and mounting bracket 10 m power and control cable Electrode arms: 350 mm Arm spacing: 170 mm With synchronous welding control 15036 Ppedpegibv Ejfx Afaou

Leto izdelave: 2026, stanje: novo, Parts Cleaning System, Spray Cleaning System Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (manufacturer: Lowara), circulating 3-sided spray system (from below, sides, and above) with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Net weight: approx. 220 kg Washing timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (interior and exterior cladding) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Full system insulation (tank and cabin) made of stainless steel 1.4301 Ppjdpfohgh I Ssx Afaou Mechanical lid locking Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction incl. condensate return Preparation for future installation of an oil separator The parts washer is in as-new condition, never used. OTHER BASKET SIZES AVAILABLE UPON REQUEST!!!

Leto izdelave: 2025, stanje: novo, Parts Cleaning Machine, Spray Cleaning System Type L122 Fully automatic hot water chamber washing machine with basket drive powered by geared motor, machine housing made of stainless steel 1.4301. - 2 stainless steel 3-sided nozzle systems with stainless steel flat jet nozzles - 2 stainless steel washing pumps (Manufacturer: Xylem/Lowara) - Level control as dry-running protection - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. loading weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 mm Ppedpohl Ic Refx Afasu

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water washing machine for parts, featuring basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature – 90°C) Ppjdpfxedz Dy He Afaju System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing time timer freely adjustable (minutes and hours) Entire cleaning machine (inner workings and exterior cladding) manufactured from stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Operating hours counter Steam extraction including condensate recirculation Parts washing machine is as new (pilot plant/technical center machine) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is subject to change and non-binding. Modifications, errors, and prior sale expressly reserved.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water parts washer with basket drive via gear motor, 2 stainless steel washing pumps (Make: Lowara), and 2 three-sided circulating spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Maximum loading weight: 250 kg - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (room temperature to 90°C) Podpfjhl H Uuex Afajpu System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Wash time can be freely set (minutes and hours) Entire cleaning machine (internal components and outer housing) made of stainless steel 1.4301 Water circulation system and loading basket made of stainless steel 1.4301 Complete system insulation (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Operating hours counter Steam vapor extraction including condensate return Parts washer is in near-new condition (test/demo unit) This offer is non-binding and subject to prior sale. Changes, errors, and intermediate sale expressly reserved.

Stanje: zelo dobro (rabljeno), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit manufactured by Weiss Umwelttechnik. The system is designed for standardized water, spray water, and ingress protection testing according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industrial, automotive, electronics, quality assurance, R&D, test laboratories, research, and material testing applications. Operation is via an integrated touch control panel. Test procedures can be performed automatically. System Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test Types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Available test accessories Electrical Data Supply Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated Power: 17 kW Rated Current: 30 A Wiring Diagram No.: 82962 CE marking available Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable approx. 80 to 100 bar Technical Data Rotation table speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10°C to 35°C Noise level: approx. 88 dB(A) Heat dissipation to surroundings: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Spray ring/nozzle ring High pressure unit Flow meter ESD earth bonding point CE marking Robust industry-grade construction Dimensions / Weight Test chamber SWT 600/800: Approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: Psdpfx Afjzachcsaepu Approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high pressure unit: Approx. 850 x 1,200 x 800 mm Weight of high pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documentation Operating manual EC declaration of conformity Quality inspection certificate Technical documentation as shown in the pictures Accessories Spray ring/nozzle ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation and papers Condition Used equipment from industrial use. Visual condition as shown in the pictures. The system can be powered on. Display and control interface are operational and visible. No further technical inspection, calibration, or complete functional testing has been carried out. Inspection and testing on site by appointment are possible and recommended. Scope of Delivery Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Rotating table and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included. Loading by arrangement possible. Transport and shipping by suitable forwarding agent required. Dimensions, weights, and technical data are partly taken from documentation. Data may vary. Commercial sale without warranty. Subject to change, error, and prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 326 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A20221005, dolžina podajanja os X: 5.500 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 100 mm, hitrost pomika os X: 3 m/min, teža obdelovanca (maks.): 500 kg, delovna širina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, volumenski pretok: 12.000 m³/h, sesalna zmogljivost: 6.000 m³/h, priključek za stisnjen zrak: 6 letvica, For sale is a fully automatic coating line in excellent condition, consisting of the following components: 1 ----- VEN SPRAY SMART Spray System ----- Year of manufacture: 2019 Feed speed: 1.5–4.0 m/min Operating speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300x100x10 mm Max. workpiece size: 3,600x1,200x50 mm Coating materials: water-based and solvent-based lacquers Spray process: Air, Airmix, Airless 326 operating hours 2 ----- VEN MOVE TRANSFER ----- Type: VEN MOVE TRANSFER 180° Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3 ----- VEN TRANS BELT (x3) ----- Type: VEN TRANS BELT conveyor belt Year of manufacture: 2022 Length: approx. 5,635 mm Outer width: approx. 1,511 mm Psdpfozcmy Uex Afajpu Working width: approx. 1,300 mm Conveying speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours 4 ----- VEN TRANS BELT with Dust Cover ----- Type: VEN TRANS BELT conveyor belt Year of manufacture: 2022 Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveying speed: 3.0 m/min Max. load: 20 kg/m 5 ----- VEN MOVE TRANSFER with Drying Chamber ----- Type: VEN MOVE TRANSFER with drying chamber Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Conveying speed: 3.0 m/min Max. load: 20 kg/m Drying chamber: Manufacturer: Adolph&Co GmbH Min. exhaust air volume: 1,200 m³/h 6 ----- Supply Air Unit HC12 ----- Manufacturer: Berliner Luft Recirculating air volume flow: max. 12,000 m³/h Max. heating temperature/power: 60°C / 174.14 kW 1,620 operating hours ----- Technical Features ----- - Fully automatic coating process - Programmable multi-layer coating - Automatic control of the entire coating sequence - 6 freely programmable spray guns - Suitable for water-based and solvent-based lacquers - Suitable for automated industrial coating processes The system was installed in 2022 and was only in use for approx. 1 year (326 operating hours on the spray gun drive). It is in very well-maintained condition, is fully documented, and ideally suited for industrial coating applications with high quality requirements. The original investment value in 2022 was approximately €760,000. The sale price is negotiable.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.000 mm, Pršilni avtomat Proizvajalec: Leif Lorentz Tip: B3 Primeren za vodne lake in izdelke na vodni osnovi Delovna širina: 1000 mm Prehodna višina: cca 110 mm Ppodpfexmrdxjx Afaeu Pripravljen za 1 črpalko in 5 pršilnih pištol Napredovanje nastavljivo, transport obdelovanca preko transportnega traku (transportni trakovi obnovljeni!) Z integriranim sistemom za vračanje laka: lak, lazura ali olje se zbirajo in jih je možno ponovno uporabiti Integriran filtrirni sistem Stroj je trenutno v fazi čiščenja in tehničnega pregleda. Prodaja bo potekala v delujočem stanju. Dobavni rok: cca 3 tedne

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Oprema: kabina, Proizvajalec: Garmat Belgija Tip: M 6/7A Letnik: 07/1989 Prostornina delovnega prostora: 70,5 m³ Kapaciteta ventilatorja: 24.000 m³/uro Moč motorja: 7,5 kW Plinski gorilnik: 200 kW Skupna električna priključna moč: 14 kW Obratovalna napetost: 380/220 V Kapaciteta 24.000 m³/uro in plinski gorilnik 200 kW pomenita, da gre za resno profesionalno kabino, ne za hobi izvedbo. Popolnoma deluje; gorilnik in ventilator sta funkcionalna; filterski sistem je kompleten; brez večjih poškodb zaradi rje; Notranja dolžina: cca 6,70 m Notranja širina: cca 4,0 m Notranja višina: cca 2,5 m Mere so približne. Zunanje mere: 6,85 x 6,00 x 3,10 m cca. Kabina si je na voljo za ogled in mora biti razstavljena v lastni režiji. Za nakladanje zagotovimo viličar. Pjdpfjzcfp Isx Afaepu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, premer cilindra: 105 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Pjdpoy Ew E Uefx Afaepu Premer valja: 105 mm Opomba: Pri nakupu več artiklov z iste lokacije (glejte ponudbe spodaj) bodo obračunani ugodnejši stroški demontaže in nakladanja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MKR30029343, PODROBNOSTI O STROJU Napetost: 400 V Frekvenca: 50 Hz Moč: 6,2 kW OPREMA CE-označba MAKOR razkladalnik ni del dobave. Ppjdsy Tn Rkjpfx Afaju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 070139, delovna širina: 1.300 mm, sesalna zmogljivost: 12.000 m³/h, skupna masa: 5.000 kg, višina obdelovanca (maks.): 80 mm, Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu najkasneje do 22.06.2026! TEHNIČNE PODROBNOSTI Največja delovna širina: 1.300 mm Najmanjša dolžina obdelovanca: 300 mm Največja debelina obdelovanca: 80 mm PODROBNOSTI STROJA Sistem premikanja: CNC-krmiljen z oscilirajočimi rokami Dovod zraka v razpršilno kabino: 12.000 m³/h Odsesavanje: 12.000 m³/h Moč ventilatorja: 7,5 kW Razpršilne pištole: 4 kosi Moč glavnega motorja: 15 kW Napetost: 400 V Poraba toka: 32 A Skupna moč: 15,6 kW Največji delovni tlak: 120 bar Dimenzije in teža Dimenzije v sestavljenem stanju: 7.000 x 4.300 x 3.200 mm Dimenzije (D x Š x V): 11.000 x 2.400 x 2.400 mm Teža: 5.000 kg Transportni paketi: 4 kosi Ppedpfoy Tvc Uex Afaou OPREMA CE-označevanje Razpršilna pištola Tip črpalke: Wagner Število razpršilnih kabin: 1

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Cobra je ekskluzivna visokotlačna dvostruka membranska pumpa prikladna za Airless i AirCoat primjene do 250 bara. Cobra je prva visokotlačna pneumatska pumpa bez brtvi. Zbog nepostojanja kontakta između materijala i vanjske atmosfere (pumpa je potpuno zatvorena), nedostatka trenja u sekciji za fluid i minimalnog smicanja, savršena je za sve vrste materijala, uključujući i najzahtjevnije kao što su reaktivne boje (UV boje, izocijanati, akrilati) ili visoko abrazivne materijale. Pumpa radi s izuzetno niskim pulsiranjem i stvara ravnomjeran tok boje, omogućujući savršen uzorak prskanja i vrhunsku kvalitetu površine. Zahvaljujući minimaliziranim unutarnjim volumenima, pumpa je dizajnirana da značajno smanji potrošnju otapala i otpad materijala tijekom ispiranja i operacija promjene boje. Cobra 40-10 je idealno rješenje za rad s manjim količinama i učestalim promjenama boja – preporučuje se za primjene sa jednim do tri pištolja u drvnoj i namještajskoj industriji, malim stolarskim radionicama te u općoj metalnoj industriji. Cobra® 40-10 je također idealna za doziranje baze ili učvršćivača za 2K miješalice (FlexControl i FlexControl Plus). Wagner membranska pumpa OMJER TLAKA 40:1 MAKS. TLAK MATERIJALA NA ULAZU U PUMPU 20 bara PRIKLJUČAK ZA DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ RADNA TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ Ppsdpfxeqzx Nke Afaeu MAKS. RADNI TLAK 250 bara MAKS. BROJ UDARACA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm³/DS TEMPERATURA OKOLIŠA 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA BUKE 74 dB(A) PODRŽANI PH MATERIJALA 3,5 - 9,0 pH PUMPA SE ISPORUČUJE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Leto izdelave: 2020, stanje: novo, The use of a photocell in the workpiece area allows for the measurement of its length, thereby enabling the spray guns to be activated as soon as the part enters their range and to be deactivated immediately after painting is completed. The photocell is included as standard equipment. Identification of parts with special tags. Identification plates with holes are attached to the workpiece hanger. Based on this, the PLC controller, together with the photocell, detects the painted part and switches the guns on and off at the appropriate moment, saving both energy and powder coating material. Vertical shape detection of the part: The use of light gates with horizontal sensors allows the PLC controller to analyze the vertical contour of the part. The PLC controller measures the timing in which the part is expected to enter the gun space; as a result, it becomes possible to selectively turn the spray guns on or off. The use of light gates with multiple sensors in both horizontal and vertical arrangements enables precise measurement of the part’s dimensions, making it possible to control manipulators as well. Ppodpfxofy T Arj Afaeu The benefits of using photocells or light gates are primarily in saving powder and energy by eliminating spraying in areas where no part is present. With light gates, precise control of the spray guns is possible.

Leto izdelave: 2020, stanje: novo, ROMER manipulators are characterized by their quiet operation. They are suitable for both simple, widespread applications as well as complex multidimensional processes. Programming is carried out via a PLC control system. Suitable for operations with both long and short strokes. The toothed belt drive ensures quiet running. Maintenance-free AC motor. Psdpfof Aad Nsx Afajpu Slim column design for space saving. The robust construction of the manipulators provides extensive capabilities and high stability. The manipulator is equipped with a 7" touch panel, or can be externally controlled via the ModBus protocol using RJ45 cables.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Brizgalna enota tip 150, odstranjena iz Arburg 420C 1000-350/150, premer polža 35 mm. Popolnoma opremljena s hidravličnim motorjem, ventili itd. ZNIŽANJE CENE Z 1200 NA 850 EUR!!! Podpfx Afev Tp Ncoaopu