Barford Sxr 6000 nakup rabljenega (3.260)

Stanje: zelo dobro (rabljeno), RMS Type: SW 3509 + Amplifier TGD 6000-000.00 and Fan Test Manager SWR 900 Power Amplifier: TGD 6000 Vibration Exciter: SW 3709 High-Pressure Fan HVM 80-100 GL 270 RMS Electrodynamic Vibration Test System: Technical Data: Performance Data Max. Vector Force Sinus: 7.5 kN Max. Vector Force Random: 6.75 kN Max. Vector Force Shock: 13.1 kN Frequency Range: 0 - 3000 Hz Mass of Vibrating System (Dyn.): 9 kg Primary Resonance (unloaded): 2.5 kHz Max. Amplitude (Sinus): 18 mm (Random, Shock): 26 mm Max. Velocity (Sinus): 1.5 m/s (Random, Shock): 2.5 m/s Max. Acceleration Sinus Vibrating system (unloaded): 833 m/s² Extra Payload 10 kg: 394 m/s² Extra Payload 30 kg: 192 m/s² Extra Payload 50 kg: 127 m/s² Max. Acceleration Random Extra Payload 30 kg: 173 m/s² Max. Acceleration Shock Vibrating system (unloaded): 1450 m/s² Extra Payload 30 kg: 335 m/s² Stray Field Without Counterfield Coil On Table Surface: 20 mT 120mm Above Table Surface: 7 mT With Counterfield Coil On Table Surface: 10 mT 120mm Above Table Surface: 2 mT Vibration Isolator Operating Range Vertical/Horizontal Resonance Frequency: 2.7 Hz Operating Air Pressure: 5 bar Pneumatic Weight Compensation Max. Weight Compensation: 250 kg Operating Air Pressure: 2.3 bar Cooling Vibration Exciter: Air Min. Cooling Airflow: 9 m³/min Max. Exhaust Air Temperature (at room temp. 35°C): 80°C Power Amplifier: Air Heat Dissipation to Room Air: 1.5 kW Emission: Sound Pressure Level 1m Distance at 1.6m Height: 105 dBA Electromagnetic Field SW 3709 Typical: 1.5 mT (50Hz) Typical: 0.5 mT (100Hz) Electromagnetic Field TGD 3000 Typical: 150 HT (50Hz) Dimensions / Weights Table Diameter / Thread: 224mm / M8 Vibration Exciter with Integrated Isolators: 970 × 695 × 950 mm (W × D × H) Weight: 1200 kg Power Amplifier: 550 × 700 × 2075 mm (W × D × H) Weight: 270 kg Cooling Fan: 839 × 582 × 900 mm (W × D × H) Weight: 80 kg Connection Data: Mains Voltage +6/-10% 3 x 400V, 50Hz Connected Load: 18 KVA Power Consumption (sweep mode sinus): 12 kW Total Weight approx. 2000 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data and information!) If you have further questions, we are happy to assist you by phone. Hnedpfx Ahou Tud Hj Dou

Stanje: rabljeno, Depalettierer und Palettierer – Flema Star C-LC Für NRW- und Euro-Kästen sowie Euro- und Bierpaletten, 500 Kästen/Stunde, Baujahr: 1996, Leerkästen links ein, Vollkästen rechts aus. Kastenauspacker – RICO UNO 1-Kopf Typ 124 Für NRW- und Euro-Kästen, Kopf geeignet für Euro 0,5 l, NRW 0,5 l und Ale 0,33 l/0,5 l Flaschen, 350 Kästen/Stunde, Baujahr: 2010, Rechts-Links-Betrieb. Flaschenentkorker und -entkapsler – ADELSKI Typ PPE 2005 Für NRW-, Euro- und Ale 0,5 l Flaschen, 2.000–12.500 Flaschen/Stunde, Baujahr: 1995, Betriebsstunden: 8.500, Rechts-Links-Betrieb. Flaschenreinigungsmaschine – PAC CB 14-0,5l-R-7 LII Compact Für NRW-, Euro- und Ale 0,33 l und 0,5 l Flaschen, 7.500 Flaschen/Stunde, Baujahr: 1998, Maschinennr. 125, Betriebsstunden: 14.175. Hnodewy Hh Ispfx Ah Dou Flascheninspektion – SYSCONA LC 10 FD Laugenkontrolle + Metalldetektion, Baujahr: 2007. Füller – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 Für NRW-, Euro- und Ale 0,33 l und 0,5 l Flaschen, inkl. Produktpumpe, 6.000 Flaschen/Stunde, Baujahr: 2011, Betriebsstunden: 6.200, Rechts-Links-Betrieb. Etikettiermaschine – ANKER Roland 8/3 Für NRW-, Euro- und Ale 0,33 l Flaschen, 7.000 Flaschen/Stunde, Baujahr: 1998, Betriebsstunden: 14.500, Links-Rechts-Betrieb. Inkjet-Drucker – Keyence MK-G1000 Baujahr: 2022, aktuell konfiguriert für Datumskennzeichnung auf dem Rücketikett der ANKER Roland 8/3. Kastenpacker – RICO UNO 1-Kopf L-Maschine Für NRW- und Euro-Kästen, Kopf geeignet für Euro 0,5 l, NRW 0,5 l und Ale 0,33 l/0,5 l Flaschen, 300 Kästen/Stunde, Baujahr: 2012, Links-Rechts-Betrieb. Premixer – Jakü PM-E-30-2k Für Entgasung und Karbonisierung, mit Produkttank und 2K Bran+Lübbe-Pumpe, 35 hl/h, Baujahr: 1992. Kastenwascher – RICO 2500 1-Bad Für NRW- und Euro-Kästen, 600 Kästen/Stunde, Baujahr: 2012, Rechts-Links-Betrieb. 2 CIP-Tanks, je 6 hl Dampferhitzt für Füller-CIP, mit Scheibenwechselsystem, Baujahr: 2012.

Stanje: pripravljen za uporabo (rabljen), Keyence IM 6020 Digital Measuring Projector Measuring Microscope Microscope Keyence IM 6020 Keyence IM 6000 You are welcome to come by for an inspection. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Hnsdounhq Repfx Ah Dsu Visit our shop and also take a look at our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 41.804 h, Used TRUMPF TruMatic 6000 (K01) – medium format Technical Data: Hnsdpfx Ajwkd Efsh Dou Year of manufacture: 2008 Last maintenance: 18/03/2025 Operating hours NC: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Conversion to TASC5 laser control (01/2025) Operator panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 14.100 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/6M has been extensively rebuilt and modernised by us. It features technical specifications that comply with the technical and operating documentation of a new machine, satisfies the technical acceptance conditions of the WOT and the Polish standard, and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from placement of order Technical data: - Centre distance / turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over support: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centres: 8,000 kg - Max. workpiece weight between centres + 1 steady rest: 10,000 kg - Max. workpiece weight between faceplate teeth + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers Hnedpfxjfhk Ins Ah Dsu - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 11.676 h, številka stroja/vozila: KM-1148, laserska moč: 3.200 W, prebijalna sila: 22 t, prebojni premer: 76 mm, najv. debelina pločevine: 8 mm, teža obdelovanca (maks.): 230 kg, dolžina obdelovanca (maks.): 1.650 mm, širina obdelovanca (maks.): 2.585 mm, No reserve price – guaranteed sale to the highest bidder! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control system: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Hodpfxev Am Tws Ah Dsnu Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono-tool holder, 360° rotation Hold-down device: Programmable for re-positioning operations Chip handling: Chip container Laser unit: High-frequency CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watts Laser cutting heads: 5" lens, 7.5" lens, quick-change cutting head system Height control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Operating hours: 59,234.4 h Laser cutting hours: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor monitored - 2 finished-parts containers - AutoLas - Ejector cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - Second lubricant tank - Multi-beam safety light curtains - Hydraulic quick-stop - Extraction and compact dust collector - MultiTool functionality - Thread forming function - Vibration-dampened installation - Brush tables - Chip conveyor with tilting container - Standard SheetMaster 1606 equipment - Loading station with spreader magnets - Scrap skeleton removal unit TRUMAGRIP with scissor-lift table - Sheet thickness gauge for double sheet detection - Modular suction plate - Parts conveyor belt A transport security deposit of EUR 7,500 is required.

Stanje: potreben popravila (rabljeno), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide range of materials. Ideally suited for use in research, development, or quality control. Please note: The unit is currently not operational due to a defective air bearing. Technical Specifications: - Angular resolution: 12 nrad (internal resolution) Hodpfx Ahjwv Nrhj Djnu - Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ - Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ - Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) - Frequency range (oscillation): 10⁻⁵ to 100 Hz - Normal force: 0.01 – 50 N (resolution: 0.001 N) - Temperature range: –60 °C to +400 °C (with suitable thermostat) - Dimensions (W × D × H): 400 × 400 × 780 mm - Weight: approx. 42 kg Special Features: - Very high measurement accuracy thanks to low mass inertia - Precision lifting device (0.5 µm adjustment accuracy) - Modular expandability (High Shear, RheoAdaptive Control) - Compatible with various thermostats Scope of Delivery: - HAAKE RheoStress 6000 base unit - Power cable - Software Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and errors!) Further questions can be answered by phone.

Stanje: rabljeno, Technical DetailsPower: approx. 6,000 bottles/hourProducts: Still wineContainers: Glass, PETFormats: 0.187 L PET bottleSafety features: EquippedOperating manuals: AvailableFilling type: Gravity/light vacuumBottle mouth shape: 22 mm Comprising: Conpart conveyor beltsThe line ensures seamless movement of bottles using conveyor belts with suction systems that stabilize each bottle and maintain a nominal capacity of 7,200 bottles per hour. Euro Star LDG24-24-4V monoblock filler, year 2014 - with a rinser/blow-off device with 24 nozzles. The injection system prevents liquid flow when no bottles are present. - with a wine filler featuring 24 stainless steel valves, controlling a slight vacuum and inert gas overpressure to maintain ideal filling conditions. The conical bottom tank ensures complete product drainage at the end of each cycle. - with a screw capper with 4 capping heads Conpart Arco M25 labelling machine, year 2024 - Suitable for cylindrical 0.187 litre PET Bordeaux bottles, feeding them via a screw feed system and applying labels with minimal waste. Hsdswm Sa Nepfx Ah Dsnu - Suitable for self-adhesive labels, which are smoothed with foam rollers controlled by an electronic system.

Stanje: rabljeno, moč: 22 kW (29,91 KM), Leto izdelave: 1997, Circular vibrating screen Hjdpfx Aeulu Rfjh Donu Screen surface: 6,000 x 2,000 mm Motor base with drive components Lower deck with piping and spray system incl. polyurethane screen panels for both screen decks

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1,500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm Z=60 - Cutting capacity according to the cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit Hjdov A Htkspfx Ah Djnu - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety guard over cutting unit - CE standard - Weight: 1,500 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2,400 m³/h - Air velocity at extraction nozzle center: approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6,000 mm - Pusher speed: 90 m/min - Drive via brushless servomotor - Feed system with precision rack and pinion, position feedback via servomotor - Pneumatic lift of pusher at end of cycle with overhead return - Photocell for workpiece length measurement - Photocell for defect detection – marking with fluorescent chalk - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly in machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 sequential dimensions - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 further optimization options (volume, minimal waste, priority) - Standard USB and Ethernet connection - Includes "OPTI" Function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with varying lengths, with single or batch feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Includes "OPTI PLUS" Function for detection of markings, ensuring full optimization and removal of knots and defects. - Markings with chalk Options: - Pneumatic side clamp: €850.00 - Cutting list creation via PC: €360.00 - Outfeed table: €360.00/m

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been extensively rebuilt and modernised by our team. It features technical specifications consistent with the documentation of a new machine, complies with WOT technical acceptance conditions and Polish standards, and also fulfills EU requirements. Hnjdpfsiwa Iajx Ah Dou The machine comes with a full 12-month warranty on spare parts and electrics. Availability: In stock, powered, and available for inspection at any time. Technical data: - Centre distance / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 1,800 mm Height: 1,800 mm - Net weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, mounting and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change toolpost

Leto izdelave: 2023, Stanje: novo, PLASMA CUTTING PLOTTER MTX 2000/6000 MODEL Construction: steel + aluminium Working area: 6200/2200/1400 mm XY axis drive - dual gantry drive: 4Nm stepper motors with gearboxes, rack and pinion (accuracy class 8) Z axis drive: stepper motor with ball screw Double aluminium beam with special cross-section for rigidity and longevity Traverse speed: up to 25 m/min Z-axis control system: THC MyPlasm System Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 3000 kg Total weight: 2500 kg Hjdpfeiphrtex Ah Djnu USB port for opening projects and transferring files via external USB drives Sheet detection system THC height control system TBI linear guides Dual gantry drive: X-axis: stepper motor and rack and pinion (accuracy class 8) Y-axis: stepper motor and rack and pinion (accuracy class 8) Z-axis: stepper motor and ball screw Drives implemented using TBI 20 linear rails Table equipped with water bed – low operating costs (water cutting table ensures cleaner cuts, material cooling, and reduced gas emissions during processing) WHY CHOOSE US WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL HIWIN GUIDES RENOWNED FOR LONG LIFESPAN AND HIGH CUT QUALITY REQUIRING NO FURTHER FINISHING COMPONENTS SUCH AS GEARBOXES, MOUNTS, HOLDERS, ETC. ARE CNC-MANUFACTURED BY US, ENSURING HIGH PRECISION AND REPEATABILITY OUR STRENGTHS: HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES – DUSTPROOF AND JAM-RESISTANT ADVANCED THC MYPLASM ENSURES SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTERS WE INSTALL CUTTERS PROVIDED BY THE CLIENT OR CAN SOURCE CUTTERS TO CLIENT SPECIFICATIONS ASSISTANCE WITH LEASING ARRANGEMENTS Possibility to select the appropriate cutter according to the individual needs of your business. Other table sizes available in our offer.

Stanje: zelo dobro (rabljeno), CTS CW‑60/6 – Climate Test Chamber, Water-cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climate test chamber allows the function or material properties of a test sample to be assessed under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate ensures optimum transfer to the test specimen. The air handling section is situated at the rear of the chamber interior. The refrigeration units are positioned behind the chamber in a separate frame for easy access. The control system is housed in a separate switch cabinet, with the operating panel integrated into the door of this cabinet. For dehumidification of the test area, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air using a blower. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +120 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test sample and radiant heat, measured at air inlet): - Heating: 1 K/min from -40 °C to +80 °C - Cooling: 1 K/min from +80 °C to -40 °C - Test sample: 700 kg steel - Radiant heat: - 2 kW during temperature change - 5 kW stabilized at -40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 85% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time The technical data refers to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Chamber Interior (Test Chamber / Usable Volume): - Volume: approx. 6,000 liters (6 m³) - Interior dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1500 mm (slight variations depending on configuration) External Dimensions: - Height: ~2300–2500 mm - Width: ~2400–2600 mm - Depth: ~1800–2200 mm (depends on door, frame, accessories, etc.) Hedpfowu Epgjx Ah Dsnu Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 44.4 kW (incl. 5 sockets) - Rated current: 84.7 A - Protection rating: IP 54 Technical Specification: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless performance adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes - Inspection possible by appointment (46325 Borken) - Shipping possible via freight carrier – costs and arrangements on request - Scope of delivery: (see photo) (Changes and errors in technical data and specifications are reserved.) Further questions can be answered by phone at any time.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 1.739 h, Funkcionalnost: popolnoma funkcionalen, Oprema: objemka, We are selling our Stitchliner 6,000 due to a shift to digital printing. Please note: This is a Horizon "showroom" machine that was first installed at our facility in 2022. The machine has therefore only been in production use for 3 years. The bundle delivery unit was manufactured in 2022. Components: 4 towers with 8 stations each, stitching and folding unit, three-side trimmer, bundle delivery unit Production output: approx. 4,000,000 brochures The saddle stitcher has been consistently serviced by Horizon and is currently under a maintenance contract with them. The machine is in production at our Hamburg location and can be inspected at any time. Hodjw Ew Hfspfx Ah Donu

Stanje: rabljeno, FAS Conveyor System Roller Conveyors Roller Conveyor 3000-710-650 RA2403 Further Information Manufacturer: FAS Type: Roller Conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (CL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RW): 650 mm Nominal/overall width (NW): 710 mm Roller pitch: 62.5-125 mm (adjustable) Drive types: centre drive Conveyed goods weight: up to 30 kg Optional equipment available, e.g.: Hnjdpfx Aswf Nfyoh Deu - Frequency inverter for variable speed control - Supports - Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For tailor-made, professional advice, simply get in touch with us. Contact us by phone or by email. We’ll be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacities: - 135 x 280 mm Hnsdpfxev A Htdj Ah Dju - 125 x 295 mm - 95 x 325 mm - 80 x 340 mm - 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cut unit - 8° inclined work table - Minimum workpiece thickness: 10 mm - Safety cover over cross-cut unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction performance: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air speed at port center: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measurement via servo motor - Pneumatic pusher lift at end of cycle and overhead return - Photocell for workpiece length measurement - Photocell for defect reading – marking with fluorescent chalk - Working surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet ports - Includes "OPTI" Automatic measuring function for the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or pack feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS" Function for reading markings to ensure full optimization and removal of knots and defects. - Markings with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/6M has been comprehensively rebuilt and modernised by us. It features technical specifications that match the documentation of a new machine, meets the technical acceptance standards of the WOT and the Polish Norm, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical data: - Centre distance/Turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm Hnedpfx Ahokyt Hle Dju - Powered top slide - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: pripravljen za uporabo (rabljen), REFU 317/03-AB01 frequency inverter SN: 6000-1697-0006 – 3-phase AC 0-4000V / 50/60Hz, used, in good condition, fully functional, scope of delivery as shown in photos. Hnodpfotvcucex Ah Dju

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno), 4-shaft shredder for the size reduction of thick-walled pipes. Feeding via feed chute (not included in the scope of supply, can be fabricated as an alternative). Manufacturer: Vecoplan Drive: Shaft 1: 37 kW Hnodpfx Asd Rby Dsh Dsu Shafts 2-4: 30 kW each

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Steuerungseinheit Marke: SIEMENS Modell: SIEMENS 840D Hnodsv I Hg Ijpfx Ah Deu Hauptantrieb Achsenanzahl: 4 Verfahrwege X-Achse: 3000 mm Y-Achse: 3000 mm Z-Achse: 1000 mm Zusatz-Ausstattung CNC-Portalfräsmaschine mit integrierter Drehfunktion, geeignet zum CNC-Bohren, Fräsen, Drehen sowie Winkelkopf-Bearbeitung. Diese 4-Achsen UNISIGN UNIPORT 6000 wurde 2007 gebaut. Als universelles Bearbeitungszentrum bietet sie eine robuste Bauweise und Präzision für unterschiedlichste Bearbeitungsanforderungen. Nutzen Sie die Gelegenheit, dieses UNISIGN UNIPORT 6000 Universal-Bearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen

Stanje: novo, FAS Conveyor System Roller Conveyors 2000/3000-510-450 RA2402 Further Information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3,000 mm, 5,000 mm, 6,000 mm, 7,000 mm, 8,000 mm, 9,000 mm, 10,000 mm, 11,000 mm, 12,000 mm, 13,000 mm, 14,000 mm, 15,000 mm, 16,000 mm, 17,000 mm, 18,000 mm, 19,000 mm, 20,000 mm, 21,000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62.5–125 mm, variable Hnjdpfx Ahewf I Tie Dju Drive types: Centre drive Conveyed load weight: up to 30 kg Options available, e.g.: Frequency converter for stepless speed control Support stands Side guides Price: Net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For tailored, professional advice, simply get in touch with us. Please contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H) 0 x 0 x 0 mm Weight 900 kg Total power requirement 5 kW Fully optimizing automatic cross-cut saw TR-450 MATRIX-6000 - Motor drive power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to diagram - Cutting capacity 95 x 265 mm - Cutting capacity 85 x 277 mm - Cutting capacity 60 x 290 mm - Cutting capacity 40 x 310 mm - Cutting capacity 25 x 330 mm - Cutting cycle 4 seconds - Pneumatic cutting unit Hnjdpfxov A Hr Tj Ah Dsu - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cutting unit - CE standard - Weight 900 kg Connection values: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 2 x 100 mm diameter - Extraction capacity 2400 m3/h - Air consumption per cycle 6 Nl - Airspeed at extraction port center approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed 90 m/min - Drive via brushless servomotor - Feed system with precision rack and pinion and position feedback via servomotor - Pneumatic pusher lifting at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection – marking with fluorescent chalk - Work table inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and item sequence) - 3 optimization options (volume, minimum waste, priority) - Standard USB and Ethernet port - Includes "OPTI" Function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with variable lengths, with single piece or bundle feeding - 6 optimization options (maximum length, sequence, item sequence, volume, minimum waste, priority) - Includes "OPTI PLUS" Function for detection of markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.631 h, barva: zelen, skupna višina: 3.400 mm, skupna dolžina: 6.850 mm, skupna širina: 2.860 mm, General Information Hnjdpfxow Eu Aqe Ah Dju Year of manufacture: 2019 Applications: Forestry and land management Technical Specifications Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Crawler Unladen weight: 26,700 kg Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 44.973 h, laserska moč: 2.700 W, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 2.585 mm, pomik osi Y: 1.280 mm, število mest v zalogovniku orodij: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - TruFlow 2700 Laser - MultiTool Function - Thread Forming Function - Marking / Fast Beading Function Hnodpfx Ajvxivmjh Dju - MultiBend Function - Rolling Technology Function - Repositioning Cylinder - Bulge Detection - Chip Conveyor TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser work area: 3,085 x 1,370 mm Combined work area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 – 2,700 Watt Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down force: 4.5 – 20 kN Linear tool magazine: 21 tools Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Stroke rate punching: 900 /min Stroke rate marking: 2,800 /min Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser operating hours: 29,826 h Cutting hours: 6,054 h Machine operating hours: 44,973 h Compressed air connection: 7 ± 1 bar Laser gas consumption CO₂ / N₂ / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down for repositioning - Sensor-monitored part chutes for punching and laser station, ejector cylinder at laser chute - Laser unit: High-frequency excited CO₂ laser, vibration-insulated, incl. cooling unit and DIAS 3 laser control - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, rapid hydraulic shut-off, extraction and compact dust collector, protective device against stray radiation at the cutting head

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kW Automatic Mitre Crosscut Saw CT-600-6000 - Hydraulic under-table circular saw unit - Motor power: 7.5 kW - Saw blade diameter: Z=48x5 600 mm - Saw blade bore diameter: 30 mm - Inclined work table: Yes - Automatic table rotation: -70° 0° +70° - Rotation speed from/to 0° / 70°: 3 s - Positioning accuracy: +/- 0.2° - Pneumatic workpiece hold-downs: 2 pcs - Pneumatic side aligners: 2 pcs - Safety cover over saw unit: Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness: 10 mm Connections: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Compressed air requirement: approx. 8 Nl per cycle at 8 bar - Extraction ports Ø100 mm: 2 pcs - Extraction port Ø160 mm: 1 pc - Airflow speed in centre of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Drive via brushless servo motor - Feed system with precision rack and pinion, position sensing via servo motors - Pneumatically liftable push point for passing over workpiece in the next cycle - Positioning tolerance: +/- 0.4 mm Control system: - Beckhoff industrial PC control with Windows CE operating system and touch screen - Data entry via keyboard, USB, or network - 5 optimisation criteria: a) Maximum length b) Minimum waste c) Part priority d) Volume Hnedpfxjvz Eq Ss Ah Deu e) Value - Processing of individual parts lists or merging of orders - Graphic display of parts in process - Option for batch processing - 70 cutting lists with 21 dimensions per list, or one cutting list with 400 dimensions - Safety device - In accordance with CE standards - Safety enclosure included