Avtomatska Vrtalka nakup rabljenega (1.498)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Eislingen/Fils
489 km
Avtomatska luknjarska stiskalnica z dvojnim stolpcem
RASTERHR 150 NL/4S
Klic
Stanje: rabljeno, Leto izdelave: 1978, Pressure: 150 t
Fixed stroke: 80 mm
Stroke rate: 30–150 strokes/min
Column width: 930 mm
Installation height (stroke + ram adjustment at top): 400 mm
Lateral column opening: 650 mm
Table area: 880x1300 / 1500x600 mm
Through-hole in table: 760x180 mm
Table height above floor: 1270 mm
Ram area: 920x1000 / 1300x600 mm
Weight: 27.5 t
Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH)
Approved for automatic operation in accordance with German accident prevention regulations (UVV)
with steplessly adjustable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication
WITHOUT feed unit
As-is, as currently situated, WITHOUT commissioning
Price for commissioning (with new control system) on request
Gjdpfxevut Urj Afqjbg
Mali oglas
Brügg
600 km
CNC avtomatska stružnica
CITIZEN CINCOMM-16
Klic
Stanje: rabljeno, CITIZEN CINCOM M-16 je CNC stružni avtomat, zasnovan za natančnost, visoko točnost in zanesljivost. S skupno 13 osmi omogoča maksimalni zunanji premer 16 mm, dolžino struženja 200 mm in premer vretena 20 mm; glavno in protivreteno do 12.000 vrt/min, pogon orodij do 8.000 vrt/min; resolucija C-osi 0,001°. Tehnični podatki: motor vretena 2,2 kW, skupna priključna moč 8 kVA, teža stroja pribl. 2.900 kg, dimenzije L2450×B1320×H1700 mm; revolver z 10 orodji. Namenjen je za visoko precizno proizvodnjo, omogoča tesne tolerance in je primeren za avtomobilsko industrijo, urarstvo, strojništvo, letalstvo in medicinsko tehnologijo.
Godpfx Afox Hfm Aoqebg
Mali oglas
Roreto
584 km
AVTOMATSKA VRSTA VRTANJA IN VLAGANJA
BIESSE + RBO (BIESSE Group)FTT 800 (2) + Advantage (2)
Klic
Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line
Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm
Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm
Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800)
A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C
B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90°
C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800
Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each.
Gbedpfxegvdkgo Afqog
Center B: 2 preinstallations for the addition of 2 more electrospindles.
2 tool holder magazines (revolver) with 56 positions each.
4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles)
D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore
E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8
2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72
Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each.
Center B: 2 preinstallations for the addition of 2 more electrospindles.
2 tool magazines (chain type) with 60 positions each.
4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles)
F) "BIESSE" RD dowel insertion unit
2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles
G) Unloading station (gantry double station) "RBO" Mod. Advantage SC
Mali oglas
Izdebnik
546 km
Avtomatska kotna žaga
StromabCT600
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Napajanje: 400 V
Premer rezila: Ø 600 mm
Teža stroja: 1820 kg
Leto izdelave: 2006
Tip: CT 600
Moč motorja: 7,5 kW
Serijska številka: 260856
Dimenzije podajalnega potisnika (infeed): 10 300 × 2 000 × 1 250 mm
Dimenzije odvzemnega transporterja (outfeed): 6 300 × 800 × 1 120 mm
Dimenzije odvzemne mize: 5 000 × 1 250 × 910 mm
Hitrost vrtenja: pribl. 2600 obr/min
Območje vrtenja mize: maks. ±70°
Višina reza: pribl. 200 mm (pri 0°)
Maks. širina reza: pribl. 410 mm
Minimalna dimenzija elementa: 20 × 10 mm
Gbsdpex Nnd Asfx Afqsg
Točnost pozicioniranja: ±0,4 mm
Cikel: pribl. 4 sekunde na rez
Delovna višina: 1000 mm
Priključki za odsesavanje žagovine: Ø 100 mm
Krmiljenje Beckhoff z 12-palčnim zaslonom na dotik (vmesnik Windows), 3D vizualizacija elementov, uvoz seznamov reza preko USB / Ethernet.
Mali oglas
Culemborg
960 km
Popolnoma avtomatska dvojna poševna giljotina
Autobyte3602D
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Avtomatizirani rezalni sistem Autobyte 3602D je opremljen z vrhunskimi Morso giljotinskimi rezili za popolne kote v lesu, plastiki in MDF. Z zmogljivostjo več kot 500 okvirjev na uro prihranite material zaradi minimalne izgube pri rezu, ki znaša le 1 mm (namesto 6 mm pri običajnih žagah). Avtomatski podajalnik materiala sprejme do 13 dolžin, vpenjalci vse varno držijo, separator pa razvršča odrezke in odstranjuje odpadke. Upravljanje preko Mitsubishi zaslona na dotik in PLC, pnevmatika SMC.
Gbjdpfx Afjw U D E Eoqsg
Odkrijte več rabljenih strojev
Mali oglas
Bienne
599 km
Avtomatska stružnica za palice
TORNOSDeco 13
Klic
Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2491, Manufacturing Origin: Switzerland
Net Weight: approx. 2550 kg
Customs Tariff: 8458.11 20
Dimensions: 2000x1260x1950 mm
TECHNICAL SPECIFICATIONS
10-Axis Machine – Standard Version
10 axes, 6 spindles:
Axes and Spindle Designation
- 1 sliding headstock: Z1, S1
- 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2
- 1 combined unit with 4 rotating spindles: X3Z3, S3
- 1 independent sub-spindle: Y4Z4, S4
- 1 independent counter-operation rotating axis: X4, S5
Bar feed position: right side of operator
Machine axis height: 1100 mm
Main spindle stroke: max. 255 mm
Bar capacity: 1 to 16 mm
Spindle speed: 12,000 rpm
Spindle feed rate: max. 20 m/min
Bar capacity, min./max.: 13 mm / 16 mm
Max. workpiece length:
- Guide bush machining: 180 mm
- Collet machining: 30 mm
Sub-spindle speed: 12,000 rpm
Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent)
Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent)
Clamping collet, type: F20 (No. 76-201)
Guide bush: fixed / rotating
Guide bush collet, type: Meister 605
Number of lateral tool stations, combined:
- Fixed: 2 x 5
- Rotating: 3 + 3
Number of frontal tool stations, combined:
- Fixed: 4
- Rotating: 3
Number of rear tool stations, combined:
Gedow Uc D Hjpfx Afqsbg
- Fixed: 3 + 3
- Rotating: 3 + 3
Tool section: 12x12 mm
Standard rotating tool holder: ESX 20
Bar feeder: yes
Part catcher: yes
All technical data is provided without guarantee and subject to change and/or errors.
Mali oglas
Zuchwil
580 km
Avtomatska stružnica
CitizenM16
Klic
Stanje: dober (rabljeno), Leto izdelave: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16
Technical Data
Year of manufacture: 2006
Max. machining diameter: ø16 mm
Max. machining length: 200 mm per chucking
Max. diameter for frontal drilling: ø6 mm
Max. diameter for frontal thread cutting: M6
Spindle bore diameter main spindle: ø16 mm
Main spindle speed: 200 to 10,000 rpm
C-axis main spindle: 0.001°
Gjdpfx Ajx Emnrsfqsbg
Max. collet diameter sub-spindle: ø16 mm
Max. rear machining length: 125 mm
Max. part projection sub-spindle: 25 mm
Max. drilling diameter rear machining: ø5 mm
Max. thread cutting diameter rear: M5
Sub-spindle speed: 200 to 10,000 rpm
Tool holder group: max. drill diameter ø5 mm
max. thread cutting diameter M4
Spindle speed: 200 to 8,000 rpm
Turret: max. drilling diameter ø5 mm
max. thread cutting diameter M5
Spindle speed: 200 to 6,500 rpm
Number of mountable tools: up to 21+α
Axis feed rates: 20 m/min
Minimum input increment: 0.001 mm
Axis travels:
X1 60.5 mm
Y1 208 mm
Z1 205 mm
X2 107.5 mm
Z2 133 mm
X3 195 mm
Z3 280 mm
Main spindle motor power 2.2 kW
Sub-spindle motor power 0.75 kW
Driven tool spindles: 0.75 kW
The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision parts. With a machining diameter up to ø16 mm, machining length up to 200 mm, and high spindle speeds up to 10,000 rpm, this machine is ideally suited for complex machining operations. The integrated C-axes in both main and sub-spindles enable precise positioning and sophisticated milling and drilling operations.
The machine offers ample tool capacity with up to 21 tools and several driven tool stations, allowing even complex machining processes to be carried out in one setup. Generous axis travels and precise feed values of 0.001 mm support the highest production quality with minimal tolerances.
The scope of supply includes an LNS Express-220 bar feeder from 2011, which enables automated material loading, significantly increasing productivity and process reliability. Various tool holders are also included in the package. The machine is robustly built and designed for continuous industrial use – ideal for producing watch, medical, electronic, or automotive components.
No liability is assumed for the correctness, completeness or currentness of the information provided.
Mali oglas
Lograto
389 km
Avtomatska črpalka za beton
VolvoFMX 500
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 63.311 km, prva registracija: 08/2021, vrsta goriva: dizel, konfiguracija osi: 10x4, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2021, VOLVO FMX 500, letnik 2021, 63.311 km, EURO6, samodejni menjalnik, s črpalko CIFA K55L, 55-metrska roka, cev premera 125 mm, črpalna enota HP1808ECX z zmogljivostjo 180 m³/h.
Gbedpex Hphwefx Afqog
Mali oglas
Roreto
584 km
Avtomatska linija za vrtanje in vstavljanje
BIESSETechno Logic CN + Infor CN
Klic
Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of:
O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC
No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min.
Godpfx Afsw Uhbksqsbg
No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles);
No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads);
No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads);
No. 5 upper vertical workpiece clamps
No. 2 (endless) screws for chip extraction
PC control, type CNI
O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC
No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min
No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices)
No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads);
No. 2 upper vertical workpiece clamps
No. 2 (endless) screws for chip extraction
Mali oglas
Detmold
784 km
Avtomatska lepilna pištola
KochLP
Klic
Stanje: dober (rabljeno), Leto izdelave: 2014, 2 pcs. KOCH glue guns, Type: LP, Year: 2014, with Wagner high-pressure glue pump
Automatic glue application (reverse hole gluing)
Machine no.: A1410/8413
Three-phase current: 220 V / 50 Hz
Connected load: 0.2 kW
Pump type: 18-40
Serial no.: D14 3042
Max. material pressure: 14.4 MPa
Transmission ratio: 18:1
Delivery rate DH: 40 cc
Max. air pressure: 0.8 MPa
Gbodov Dvapspfx Afqeg
Max. material temperature: 80°C
Weight: 100 kg
(Subject to technical modifications and errors as well as prior sale)
Mali oglas
Korschenbroich
832 km
Tračna žaga - avtomatska
MÖSSNERSM 7300
Klic
Stanje: rabljeno, Leto izdelave: 1991, Miza - nagibna, da, stopinje
Teža stroja cca 200 kg
Gbsdpfex Ni E Ujx Afqeg
s varilno napravo
Mali oglas
Bienne
599 km
Avtomatska stružnica za palice
TORNOSDeco 13a
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland
Net Weight: approx. 2550 kg
Customs Tariff: 8458.11 20
Dimensions: 2000x1260x1950 mm
TECHNICAL SPECIFICATIONS
10-Axis Machine – Standard Version
10 axes, 6 spindles:
Axes and Spindle Designation
- 1 sliding headstock: Z1, S1
- 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2
- 1 combined unit with 4 rotating spindles: X3Z3, S3
Gbjdpfsw T Tcwjx Afqeg
- 1 independent sub-spindle: Y4Z4, S4
- 1 independent counter-operation rotating axis: X4, S5
Bar feed position: right side of operator
Machine axis height: 1100 mm
Main spindle stroke: max. 255 mm
Bar capacity: 1 to 16 mm
Spindle speed: 12,000 rpm
Spindle feed rate: max. 20 m/min
Bar capacity, min./max.: 13 mm / 16 mm
Max. workpiece length:
- Guide bush machining: 180 mm
- Collet machining: 30 mm
Sub-spindle speed: 12,000 rpm
Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent)
Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent)
Clamping collet, type: F20 (No. 76-201)
Guide bush: fixed / rotating
Guide bush collet, type: Meister 605
Number of lateral tool stations, combined:
- Fixed: 2 x 5
- Rotating: 3 + 3
Number of frontal tool stations, combined:
- Fixed: 4
- Rotating: 3
Number of rear tool stations, combined:
- Fixed: 3 + 3
- Rotating: 3 + 3
Tool section: 12x12 mm
Standard rotating tool holder: ESX 20
Bar feeder: yes
Part catcher: yes
All technical data is provided without guarantee and subject to change and/or errors.
Mali oglas
Zuchwil
580 km
Avtomatska stružnica
MiyanoBX-26S
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Miyano BX-26S CNC Lathe
TECHNICAL DATA
Clamping Units
Collet machine with main and sub spindle: 26 mm
Maximum turning length with part gripper: 67 mm
Maximum part length: Max. 300 mm / Ø 26
Clamping cylinder L/R spindle: Stationary
Max. drilling diameter L/R spindle: Ø 12.00 mm
Max. thread diameter L/R spindle: M8
Spindle
Motor power: VAC 2.2/3.7 kW
Speed range L/R spindle: 80 ~ 8,000 rpm
L spindle Z1-axis travel: 70.00 mm
R spindle X2-axis travel: 180.00 mm
R spindle Z2-axis travel: 238.00 mm
Tool Slide
Tool slide: Vertical linear slide
Number of tool stations: 16
Number of tool stations Slide 1: 6/4
Tool shank size: 16.00 mm
Internal tool holder: Ø 20.00 mm
X1-axis travel: 135.00 mm
Y1-axis travel: 260.00 mm
Number of turning tools (L spindle) X-/Y-unit: 2/2
(For L/R spindle) Z-unit: 2+2
Speed range: 100 ~ 4,000 rpm
Rotary tool motor: 0.5 kW / 0.5 kW
Driven tools max. drill: 8.00 mm
Rotary tool motor max. drill diameter: M6
Tool Slide 2
Tool slide: Vertical linear slide
Number of tool stations: 7
Number of tool stations Slide 2: 3/4
Tool shank size: 16.00 mm
Internal tool holder: Ø 20.00 mm
Gedox Emmhepfx Afqebg
Y2-axis travel: 215.00 mm
Machine Dimensions
Machine height: 1,670.00 mm
Footprint (W x D): 2,320 mm × 1,335 mm
Machine weight: 3,000.00 kg
No guarantee is given for the correctness, completeness, or actuality of the information provided.
Mali oglas
Furtwangen im Schwarzwald
557 km
Avtomatska stružnica
CitizenM32
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen M32-2M3 CNC dolgo stružnica
Leto izdelave: 2002
Krmiljenje: Mitsubishi Meldas 635
Maks. premer obdelave: 32 mm
7 krmiljenih servo osi: X1/Z1/Y1/X2/Z2/X3/Z3
4 pogonska orodja na vertikalnem nosilcu
C-os: glavno in proti vreteno
Vključno z opremo:
- FMB Turbo 5-42 podajalnik materiala
Godpjx Dncfefx Afqsbg
- Odsesovalna naprava
- Transportni trak za dele
- 5 pogonskih orodij za revolver
- 5 standardnih nosilcev (stružni/rezkalni) za revolver
- Takoj na voljo -
Mali oglas
Roreto
584 km
Avtomatska linija za vrtanje in vstavljanje
REM (SCM Group)Over 25.13
Klic
Stanje: zelo dobro (rabljeno), Flexible NC line for drilling, milling and hardware insertion.
Numerical control "TPA" Albatros. Consists of:
Gjdpohvagkefx Afqsbg
1) "Igel" loader with 12 positions (for 12 panels), vertical panel feed.
2) Drilling machine, NC pantograph model Over 25.13 with inserter (bushings, shelf support and base).
- No. 1 working spindle (approx. 5.5 kW) with turret (10 positions)
- No. 1 drill head with 24 independent spindles (X-axis)
- No. 1 boring head with 2 independent spindles (Y-axis)
- No. 1 drill head with 5 independent spindles (Z-axis)
- No. 1 assembly unit (screwing)
- No. 1 assembly unit (press fitting)
- No. 1 storage and feed hopper
3) Unloading unit (90° transfer), with motorized conveyor for vertical panel discharge.
4) Unloading unit (0°-90°), with motorized conveyor to transfer panels from vertical to horizontal.
Mali oglas
Nysa
513 km
Avtomatska horizontalna balirka HSM
HSMAK 1200
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 12 t, dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 500 mm, teža bale: 450 kg, skupna dolžina: 5.500 mm, Oprema: dokumentacija / priročnik, The machine is in very good condition and is serviced regularly. It was purchased new by the first owner in 1994 and is immediately ready for operation.
The baler can be started manually at the push of a button or fully automatically by means of a photoelectric sensor in the feed chute. Cutting blades mounted on the press plate shred the material and compress it in the pressing channel. Once the desired bale length is achieved (bale length is adjustable), the bale is automatically tied after several pressing cycles.
Baling can be done with wire, twine, or polypropylene strap.
Automatic pressing system with 12 tons of pressing force for efficient volume reduction of residual materials (recyclables) in industrial and commercial applications:
- Cardboard
- Tetra Pak
- Foils
Gjdpfex Ihqaox Afqjbg
- Foams
- PET bottles
- Insulation mats
- and other compressible materials.
Pressing force: 120 kN
Bale size: 700 x 500 x 600 – 1200 mm
Bale weight (depending on material): 280–450 kg
Transport length: 5.5 m
Weight: 3,500 kg
Drive power: 7.5 kW
Transport costs depend on weight, volume, and above all, distance. For any inquiries, please provide the following information: delivery address (postal code and city). For further information, please contact us by phone. Please inquire by phone regarding transport costs and additional delivery options.
Mali oglas
Nemčija
575 km
Avtomatska stružnica
TraubTNL 32-7B
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 12.000 obr/min, premer struženja: 32 mm, skupna masa: 7.000 kg, hitri pomik na osi Z: 20 m/min, moč: 10,7 kW (14,55 KM), Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, C-os
Gjdpfx Ajx Diglofqobg
Zgornji revolver za orodja z osmi X/Y/Z/H z 10 orodnimi mesti
Spodnji revolver za orodja z osmi X/Y/Z/H z 9 orodnimi mesti
Zadnja enota z 8-kratnim pogonom za 3 orodja
Tečajni trakasti transporter
Papirni trakasti filter Resy
Nadzor orodij Traub
Magazin za nalaganje palic FMB LSK 38
Mali oglas
Bienne
599 km
Avtomatska stružnica za palice
TORNOSDeco 10
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2410, Year 2001 with Fanuc Deco and 10 axes
Fully checked and partially overhauled as per report.
Country of manufacture: Switzerland
Net weight: 1,500 kg
Customs tariff number: 8458.11 20
Dimensions: 1650 x 1050 x 1850 mm
TECHNICAL SPECIFICATIONS (standard version)
Headstock (Z1 axis) (+C axis optional)
Maximum bar capacity: ø 10 mm
Maximum part length, depending on collet type: 60/90 mm
Programmable spindle speed: 0–16,000 rpm
Positioned and indexed stop, increment: 0.1°
Maximum spindle power: 1.1 (3.7) kW
Tool post (X1/Y1) (X2/Y2)
Number of turret tools (2 slides; 2 x 2 axes): 2 x 4
Tool section: 8 x 8 mm
Number of cross drilling/milling tools: 4
Programmable rotation speed: 0–12,000 rpm
Front working device (X3/Y3)
Maximum number of front tools: 3
Programmable rotation speed: 0–12,000 rpm
Sub-spindle and secondary operations (X4/Z4) (+C optional)
Maximum clamping capacity: 7 mm
Programmable rotation speed: 0–16,000 rpm
Positioned and indexed stop; increment: 0.1°
Maximum number of secondary operations: 4
Number of fixed or live spindles: 4
Maximum spindle rotation speed: 9,000 rpm
Tornos-Bechler/Fanuc dedicated CNC
Type of processor: 486 DX2
Number of simultaneous axes: 10
Machine versions:
9 axes + C axis on main spindle and/or C axis on sub-spindle
All technical data provided without guarantee of accuracy or completeness.
Gjdpfxew T Tfre Afqjbg
Mali oglas
Lüdenscheid
779 km
Avtomatska stružnica
TRAUBTNL 32 P
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena!
Krmilnik: TX 8 i-p
GLAVNO VRETENO
maks. premer palice: 32 mm
maks. dolžina obdelovanca
- dolgi način struženja: 245 mm
- kratki način struženja: 125 mm
maks. hitrost vretena: 6.400 /min
C-os
PROTIVRETENO
maks. premer palice: 32 mm
maks. dolžina vpenjanja obdelovanca: 250 mm
maks. hitrost vretena: 6.000 /min
C-os
ZGORNJI REVOLVER ORODIJ
Število postaj: 10
vse gnane
maks. hitrost: 12.000 /min
Godpfx Aoxrf Etefqjbg
SPODNJI REVOLVER ORODIJ
Število postaj: 9
vse gnane
maks. hitrost: 12.000 /min
ZADNJA ENOTA
Število postaj: 8
od tega 3 gnane (T12, 13 in 14)
Hitrost T12 & T14: 12.000 /min
Hitrost T13: 4.000 /min
Transportni trak za dele
Transporter za ostružke
KSS črpalka 20 bar
IFS filter za oljno meglo
Podajalec palic FMB turbo 3-36
Mali oglas
Hilden
813 km
Tračna žaga - avtomatska
KASTOKASTOtec SC 4
Klic
Stanje: rabljeno, Leto izdelave: 2016, Premer reza 430 mm
Dolžina tračnega lista 6830 mm
Območje reza 430 x 430 mm
Krmiljenje Siemens Simatic HMI
Hitrost reza 80 m/min
Višina naslona za material 700 mm
Prostor za namestitev cca. 5,36 x 6,83 x 2,41 m
Skupna potrebna moč 25 kW
Teža stroja cca. 4920 kg
Oprema/Dodatki:
- Brezstopenjsko nastavljiv podajalnik reza
- Moč črpalke 75 l/min
Gedpfxjxb Edzo Afqsbg
- Valjčna proga
- Transporter za odrezke
- Tehnična dokumentacija
Mali oglas
Nemčija
574 km
Tračna žaga - avtomatska
JAESPACONCEPT 330-500 AP
Klic
Stanje: rabljeno, Leto izdelave: 2016, Technical Details:
Cutting diameter: 330 mm
Saw band length: 4680 mm
Saw motor: 4 kW
Cutting speed: 15 - 100 m/min
Square/rectangle: 330 x 500 mm
Gedpfjx A D Nljx Afqebg
Minimum cut length: 10 mm
Maximum cut length: 850 (-9999) mm
Total power requirement: 7.7 kW
Machine weight approx.: 5.5 t
Space required (LxWxH) approx.: 2.7 x 2.35 x 1.7 m
Horizontal Bandsaw, Fully Hydraulic
Material dimensions:
Round: 330 mm
Rectangular or beam: 330 mm x 500 mm
Bandsaw blade dimensions: 4680 x 34 x 1.1 mm
Including roller conveyor
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Kłodawa
740 km
Hidravlična stiskalnica 6 šest metrov avtomatska
LignumHK6
Klic
Leto izdelave: 2022, Stanje: novo, Hydraulic press 6 m automatic for lignum finger jointing line
Used 2022
Make:
Hydraulic press 6 meters automatic for lignum jointing line
Model:
Hydraulic press 6 meters automatic for lignum jointing line
Gbjdpsimwx Eofx Afqog
Description:
Hydraulic press, 6 meters, automatic, for lignum finger jointing line. Input, conveyor belt, output, automatic processing. For more information, please send an email.
Year:
2022
Mali oglas
Trittau
894 km
Avtomatska tračna žaga - vodoravna
KASTOKASTOtwin A2
Klic
Stanje: rabljeno, Leto izdelave: 2002, Območje reza 260 x 260 mm
Hitrost rezanja 20 - 110 m/min
Teža pribl. 2.100 kg
Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru ogledati pod napetostjo.
Tehnične lastnosti & dodatna oprema:
Gbsdpfx Afjx I Siyeqog
- Transportni trak za ostružke
Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah.
Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!
Mali oglas
Bienne
599 km
Avtomatska stružnica za palice
TORNOSDeco 20
Klic
Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3467, Country of manufacture: Switzerland
Net weight: 3,000 kg
Customs tariff number: 8458.11 20
Dimensions: 215x150x215 cm
TECHNICAL SPECIFICATIONS (standard)
Main spindle (Z1 axis) (+C option available)
Maximum bar capacity: dia. 20 mm
Maximum workpiece length depending on guide bush type: 200 mm
Programmable spindle speed: 0–12,000 rpm
Positioned stop and indexing, increment: 0.1 degree
Maximum spindle power: 3.7 (5.5) kW
Tool post (X1/Y1) (X2/Y2)
Number of tool stations on turret (2 slides; 2 x 2 axes): 2 x 5
Tool shank size: 16 x 16 mm
Number of cross drilling/milling stations per turret: 4
Programmable speed range: 0–8,000 rpm
End-working attachment (X3/Y3)
Maximum number of end-working tools: 4
Programmable speed range: 0–8,000 rpm
Gsdew Uczxepfx Afqjbg
Sub-spindle and secondary operations (X4/Z4) (+C option available)
Maximum clamping diameter: 20 mm
Programmable spindle speed: 0–12,000 rpm
Positioned stop and indexing, increment: 0.1 degree
Maximum number of secondary operations: 7
Number of fixed or rotating spindles: 7
Maximum spindle speed: 8,000 rpm
Tornos-Bechler/Fanuc dedicated CNC
Processor type: 486 DX2
Number of simultaneous axes: all
All technical data provided without guarantee, subject to errors or omissions.
Mali oglas
Hilden
815 km
Tračna žaga - avtomatska
KASTOHBA 320/420 PL
Klic
Stanje: rabljeno, Premer reza 320 mm
Dolžina tračnega žaga 6300 mm
Območje reza 420 x 320 mm
Krmiljenje Siemens Simatic HMI
Hitrost reza 20 - 130 m/min
Višina podlage za material 950 mm
Gbedpjxb Eduefx Afqjg
Skupna potrebna moč 15 kW
Teža stroja cca 2920 kg
Potreben prostor cca 6,35 x 6,76 x 2,41 m
Stroj obnovljen pri podjetju Kasto v letu 2016
Oprema/Dodatki:
- Neprestano nastavljiv podajalni hod reza
- Pnevmatski priključek 6 bar
- Hladilna tekočina 75 l
- Zmogljivost črpalke 40 l/min
- Valjčna proga
- Transporter ostružkov
- Tehnična dokumentacija
Olajšamo vam iskanje: "avtomatska vrtalka"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.






























































































































































































































































