Visoko zmogljiva polavtomatska tračna žaga

HUVEMA - BEKA-MAK BMSY 330 C

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Isdslbmupspfx Af Toal

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Iodpfx Ajgf H Saof Tsal Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: novo, Cutting diameter round: 900 mm Iajdpfxsfg E Hpj Af Tjl Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling You are welcome to inspect the desired system at any time in our production/demo hall. Isdofww Sqopfx Af Tjal Do not hesitate to contact us for more information. Plantec Maschinen GmbH

Stanje: rabljeno, Technical Details: Maximum balancing weight: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 - 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used for measuring and correcting the static and dynamic imbalance of rotors. Maximum balancing body weight 800 kg with equal load distribution, i.e. 400 kg per bearing stand Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Distance between bearing centers min. 125 mm and from shaft end to bearing center max. 2070 mm Measurement speed: Iaedpfx Aeu Upp Tof Tjl 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 mounting pedestals with manual adjustment along the entire bed Schenk measuring device with digital display and various accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts, please inquire for details! i.D.

Stanje: rabljeno, številka stroja/vozila: 11666, Rotor diameter: 280 mm Rotor width: 300 mm Iaedpfx Asghgq Nef Tel 3-blade rotor 2 rows of stator knives Feed opening approx. 300 x 280 mm Drive motor 11 kW With soundproof enclosure, soundproof hopper, and extraction fan

Stanje: novo, Pressing force: 40 t Bending length: 1270 mm Clearance between uprights: 980 mm Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3,200 kg Isdpfsgiud Hex Af Tsal Accessories / Special Features: • Manual control for the motorized immersion depth and backgauge o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, lightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after order receipt plus pre-carriage costs from China to Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151–153 D - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), 200m³ stainless steel tanks Iaodpfxjfngl Ne Af Tol Number of units: 3 180m³ stainless steel tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Base thickness: 5.1 mm We offer transport to all regions of Europe with our specialized trailer!

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material Ijdpfofg E Hlox Af Teal 6. Open vice

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Isdpfjfibd Tjx Af Teal Machine weight: 820 kg