Alexis Manometer nakup rabljenega (319)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Usata saldatrice multiprocesso MIG/MAG EWM Phoenix XQ 500 puls DW EX R1 5 m, anno 2023 Saldatrice multiprocesso MIG/MAG pulsata completa di tutte le caratteristiche e processi di saldatura, versione compatta e smontabile. Alimentatore filo Drive XQ, Drive XQ HP WRS/WHS, MFG 2023 Supporto pivotante per alimentatore filo, Liquido refrigerante “blueCool” fino a -10 °C, tanica da 5 l (2x 5 l) Pacco cavi intermedio raffreddato ad acqua, 14 poli, 1,8 m Torce di saldatura PM 551 W LED X M9, 3 m Adattatore bobina filo B300, Torce MIG/MAG con display grafico OLED, raffreddamento ad acqua, tecnologia X, 4 m Cavo di massa con pinza, 550A / 60 %, 95 mm² Riduttore di pressione con manometro, 30 l Spina rete montata, Cavo di massa con pinza: WK95mm² Ø 13 mm 550A/60% 4m/Z Telaio gru – sposta il punto di sollevamento della gru dal basso verso l’alto Pacco cavi intermedio raffreddato ad acqua, 14 poli, sezione 95 mm²: Z MIG XQ 95 mm²/1,8 m 500A/80% Adattatore bobina filo AK300 per bobine con cestello (B 300) Kdodpfswgy Eyjx Ah Deu Campo di regolazione corrente saldatura: 5 A - 500 A Ciclo di lavoro a 40°C: 500 A / 80%, 470 A / 100 % Tensione a vuoto: 82 V Tensione di alimentazione (standard): 3 x 380 V – 400 V Tensione di alimentazione (possibile): 3 x 440 V – 460 V Tensione di alimentazione (possibile): 3 x 480 V – 500 V Tolleranze alimentazione (standard): -25 % fino a +20 % Frequenza: 50 Hz / 60 Hz Potenza generatore consigliata: 33,2 kVA Rendimento: 90 % Assorbimento: Pi 26 W Capacità di raffreddamento a 1 l/min: 1500 W Pressione pompa: 3,5 bar Capacità serbatoio: 8 l Classe di protezione: IP23 Classe EMC: A Dimensioni (L x P x H): 1152 mm x 686 mm x 976 mm Peso: 125,5 kg / 276,7 lbs Norme: IEC 60974-1, -2 e -10 CL.A Prezzo: 7.500 Euro + IVA, trattabile, FCA: Oradea/Romania Salvo errori, modifiche e vendita anticipata. Parliamo inglese. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, obratovalne ure: 4 h, številka stroja/vozila: 84149090, Complete containerized station with a screw compressor, designed for industrial operation, equipped with a full air treatment system. Ready for immediate commissioning. Only 4 hours of test run time. CONTAINER 10" Specifications Compressor Ervor Rafale 50 SP (2016) – oil-injected screw, fixed speed Motor power 37 kW (50 HP) Flow rate (FAD) ~260 Nm³/h at 7–9 bar Drive Belt drive with automatic tensioner Power supply 400 V / 3-phase / 50 Hz Dryer Twin-tower adsorption dryer, regenerated, timer or DP controlled Aftercooler Air-cooled aftercooler with ventilation Filtration Pre-filter, fine filter, and final filter class 1 μm / 0.01 μm Container 10 or 20 ft, steel, ventilated, insulated, with service doors Control Control panel + pressure switch, hour meter, phase protection Technical condition Very good Cold regenerated adsorption dryer ERVOR adsorption dryer – twin-tower air drying system Integrated in the container station. Suitable for continuous operation, with automatic bed regeneration. The set also includes an aftercooler and complete filter package (pre, fine, and final). The system is ready for use in industrial or military applications. Final dew point: ≤ -40°C PDP (pressure dew point) Air treatment and cooling system The station is equipped with a multi-stage compressed air purification system, including: - 3-stage filtration (solid particles, oil, moisture), - Aftercooler with fan, - Insulated and serviced piping, - Monitoring manometers, ball valves, service bypasses, - The system is designed for operation in heavy-duty industrial and mobile environments. Additional photos or a short video available upon request. Kdodpfx Ahow D Ut Hj Deu Feel free to contact for purchase.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Kdjdpfx Aefg E Hpeh Deu Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, The semi-automatic bandsaw HB 460 L is a top-tier choice in the category of horizontal mitre bandsaws and belongs to the product group of semi-automatic bandsaws. This machine offers high precision when cutting heavy workpieces made of steel, cast iron, and other materials. Its robust dual-column design ensures stability and reduces vibrations, resulting in shorter cutting times and remarkable accuracy. With a steplessly variable cutting speed of 20 to 100 m/min and a powerful, low-maintenance motor, it is extremely reliable. Equipped with hydraulic workpiece clamping and a manometer for monitoring blade tension, the HB 460 L maximizes blade life and lowers operating costs. The automatic lift height adjustment and a swiveling vice for mitre cuts increase the flexibility of the application. Discover the advantages of this high-performance machine and request a quote to learn more about the HB 460 L, a reliable horizontal mitre bandsaw. Kedju Abvdepfx Ah Dodu

Stanje: novo, Pressure: 60 t Stroke: 380 mm Table working width: 750 mm Pressure: 259 bar Oil capacity: 38 dm³ Approach speed: 2.87 mm/sec Working speed: 9.5 mm/sec Return speed: 12 mm/sec Total power requirement: 2.2 kW Machine weight approx. 540 kg Cylinder inner diameter [mm]: 170 Piston rod diameter [mm]: 75 Piston base diameter [mm]: 100 - Integrated manometer - Pressure regulator - Hydraulic power unit with 2 speeds Kodei A S I Iopfx Ah Dodu - Height-adjustable work table - Joystick for moving the piston up/down The 60-ton workshop press features a fixed cylinder and a motorized, height-adjustable work table. Equipped with pressure regulation, manometer, two speeds, and a joystick to move the piston up and down. The joystick allows for precise control of the piston, making this hydraulic press ideal for precision tasks.

Stanje: rabljeno, Horizontal Mitre Band Saw KNUTH with Minimum Quantity Lubrication, Model HB 250A Metalworking bandsaw with pivoting saw bow. Serial No. 201603004 Year of manufacture: 2016 Cutting capacity at 90° round: Ø 225 mm Cutting capacity at 90° square: 190 x 190 mm Cutting capacity at 90° rectangle: 245 x 150 mm Cutting capacity at 45° round: Ø 145 mm Cutting capacity at 45° square: 145 x 145 mm Cutting capacity at 45° rectangle: 200 x 145 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 x 90 mm Cutting capacity at 60° rectangle: 110 x 70 mm Saw blade: 2480 x 27 x 0.9 mm Wheel diameter: 290 mm Blade speed: 45 / 90 m/min Compressed air requirement: approx. 5 bar (minimum quantity lubrication) Working height: 910 mm Motor power: 1.1 kW Connection: 400 Volt, 50 Hz - Two-stage electric motor for blade speed selection - Stepless lowering adjustment via hydraulic cylinder Kdedpfxjrvm Npe Ah Deu - Automatic shut-off after cut completion - Saw bow infinitely adjustable for mitre cuts up to 60° - Manometer for blade tension - Vice with quick-release short stroke clamping system - Coolant system with electric pump - Minimum quantity lubrication UNI-Microspray I (year: 2017) - Workpiece stop Space requirement (L x W x H): 1450 x 700 x 1450 mm Weight: 185 kg Excellent condition

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rabljeni večprocesni MIG/MAG varilni aparat Phoenix XQ 500 puls DW EX R1, 5 m, letnik 2023 Večprocesni MIG/MAG impulzni varilni aparat, vključno z vsemi funkcijami in varilnimi postopki, dekopaktna in demodularna izvedba Pogon za podajalnik žice Drive XQ, Drive XQ HP WRS/WHS, letnik 2023 Rotirna podpora za podajalnik žice Hladilna tekočina "blueCool" do -10 °C, 5 l Vmesni paket cevi, vodno hlajen, 14-polni, 1,8 m Varilna pištola PM 551 W LED X M9, 3 m Adapter za kolut žice B300 MIG/MAG funkcijska pištola z OLED grafičnim zaslonom, vodno hlajena, X-tehnologija, 4 m Delovni kabel s kleščo, 550 A / 60 %, 95 mm² Reduktor tlaka z manometrom, 30 l Kodpjwktz Aefx Ah Djdu Omrežni vtikač, montiran Delovni kabel s kleščo: WK95mm² Ø 13 mm 550A/60% 4m/Z Žerjavni okvir – pomakne dvižno točko žerjava z dna na vrh Vmesni paket cevi, vodno hlajen, 14-polni, preseka 95 mm²: Z MIG XQ 95 mm²/1,8 m 500A/80% Adapter za kolut žice AK300 za uporabo s košaro za kolut žice (B 300) Nastavljivo območje varilnega toka 5 A - 500 A Delovni cikel pri 40 °C: 500 A / 80 %, 470 A / 100 % Napetost v prostem teku 82 V Napajalna napetost (tovarniško) 3 x 380 V - 400 V Možna napajalna napetost 3 x 440 V - 460 V Možna napajalna napetost 3 x 480 V - 500 V Dovoljena odstopanja omrežja (tovarniško) -25 % do +20 % Frekvenca omrežja 50 Hz / 60 Hz Priporočena moč generatorja 33,2 kVA Izkoristek 90 % Poraba energije Pi 26 W Hladilna moč pri 1 l/min: 1500 W Tlak črpalke 3,5 bar Kapaciteta rezervoarja 8 l Razred zaščite IP23 EMC razred A Dimenzije (D x Š x V): 1152 mm x 686 mm x 976 mm Teža 125,5 kg Standardi IEC 60974-1, -2 in -10 CL.A Na zalogi imamo 2 popolnoma enaka kompleta. Cena: 6.000 EUR + DDV, po dogovoru, FCA: Oradea/Rumunija Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Govorimo angleško / deutsch / magyarul / français / românește.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, pritisk: 450 letvica, 5.000 litrov na uro - 450 bar - Visokotlačni homogenizator Visokotlačni homogenizator. 2 stopnji s pnevmatskim nadzorom tlaka. 3 keramični bati, premer bata: 55 mm in hod bata: 100 mm. Ohišje iz nerjavečega jekla z materialom za dušenje hrupa. Priključki: 2 x 3" DIN. Trenutna moč motorja: 132 kW in največji tlak v tej konfiguraciji z navedenim motorjem je 450 bar. Prostostoječa nadzorna omara z upravljanjem Siemens Simatic ET 200SP. Majhna nadzorna omarica na stroju z Siemens Simatic ET 200SP. Z varnostnim ventilom nastavljenim na 540 bar. Manometer na 1. in 2. stopnji. Elektronski tlačni oddajnik na dovodu in izhodu. Tokovno stikalo na hladilni vodi. Dušilec pulzacij na dovodu. Daljinsko upravljanje tlaka. Priložen rezervni dušilec pulzacij in varnostni ventil. Dokumentacija: navodila za uporabo, električna shema, seznam rezervnih delov in servisno poročilo. Mere nadzorne omare: 80x40x187 (d x š x v) cm. Kdjdpfx Ahexnl Exs Dou

Stanje: rabljeno, Leto izdelave: 2001, Tehnični podatki: Krmilni sistem: Operaterski panel na dotik Delovanje: Samodejno mešanje in doziranje barv Sestavni deli stroja - Krmilni panel na dotik (CMA Challenger 151) Kodexg Nc Sjpfx Ah Djdu - Integrirani sistem doziranja in mešanja - Mešalnik / mešalna enota (delovni deli za mešanje) - Pnevmatski sistem / nadzor tlaka (manometer in pnevmatične povezave) - Hitre spojke za orodja/mešala - Programska oprema za upravljanje receptur (AURORA MIX / sistem za upravljanje formul ali enakovredno), z integracijo v sisteme za ujemanje barv.

Stanje: novo, Oprema: ABS, TECNOKAR SUPERTOP F1 6900 - AXLES: Single axle 9 ton, tandem axles 12 ton each. R22.5 - AXLE CONFIGURATION: 1st axle liftable and self-steering, 2nd and 3rd axles fixed - VOLUME: 28 m³ - BODY STRUCTURE MATERIAL: Standard in DOMEX steel - FLOOR PLATE MATERIAL: Wear-resistant steel, hardness HB 450 - FLOOR PLATE THICKNESS: 6 mm - SIDE PANEL MATERIAL: Wear-resistant steel, hardness HB 450 - SIDE PANEL THICKNESS: 4 mm - REAR: High yield strength steel - REAR TAILGATE TYPE: Tipping tailgate with gasket and bolting rods, fully hydraulic opening - REAR TAILGATE VERSION: Recessed into the body - HYDRAULIC OPENING VERSION: With non-recessed arms and protective wedges - REAR TAILGATE CLOSURE: With locks on the side panels, hydraulic - DUAL JOINT ANTI-JAMMING SYSTEM: Yes - SEALING TYPE: With gasket on the body and 5 tightening levers - REAR OVERHANG: With extension for paver in line with the floor Kdjdpevzh Ugsfx Ah Dju - SHAPED SADDLE: No - COVER TYPE: Cramaro - COVER HEIGHT: 400 mm Standard Equipment and Accessories: - MANUAL LOCKING OF THE SELF-STEERING AXLE - REVERSING BUZZER - SPEED LIMITATION DISCS - REAR ECOLED II LED LIGHTS - PRESSURE GAUGE FOR LOAD MEASUREMENT - PAIR OF REAR TOWING EYES - MANUAL FLIP-OVER BUMPER WITH ROUND UNDER-RUN PROTECTION BAR - FAST UNLOADING SYSTEM - ANTI-VIBRATION RUBBER BUFFERS - TPMS TIRE PRESSURE MONITORING SYSTEM - SAF RETRACTABLE OSCILLATING LANDING GEARS - SINGLE REMOTE CONTROL FOR ELECTRIC COVER AND VIBRATOR - UNDERSIDE VIBRATOR - 10 ALCOA DURA BRIGHT ULTRA ONE 9.00 R 22.5 ALLOY WHEELS - 10 CONTINENTAL 315/80 R 22.5 TIRES FINANCING OR CUSTOM LEASING TERMS AVAILABLE ONSITE. FROM 24 UP TO 96 MONTHLY PAYMENTS, ALSO WITH ZERO DOWN PAYMENT. ADDITIONAL LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s – Limited Edition - 660 S Semi-trailer – Refrigerated Tipper – Lamberet - Schmitz Isuzu - Fixed body – Crane – Tipper - 4 axles - 4 Rear Axles - Tway - T-Way-540 - 460 HP - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Curtain sider - Box body - Tail lift - Refrigerated cell - Insulated with Fridge - Van Domenico Truck Srl declines all responsibility for possible discrepancies regarding technical equipment, optional features and specifications that might in some cases differ from those described. Please verify the features of the specific vehicle.

Stanje: novo, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Max. pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a universal hydraulic press specifically designed for bending, profiling, and straightening operations. The machine's applications vary depending on the accessories installed on the worktable, tool holder, or in the punch and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending work. The press can also be supplied with tools (e.g., block punches) that can be mounted on the tool holder, as well as tools that can be fitted into the punch and pin holes for a range of different operations. Kdodpfx Ahjgvkmre Dsu • The hydraulic system can be adjusted via pressure and flow control valves, which influence the pressing force and speed of the press. The press features a built-in pressure gauge. • The control panel is used for operating the press, displaying the piston stroke, and selecting between manual or automatic operation. The HB-28 model also comes with a built-in memory capable of storing up to 4 different programs. • Operation is carried out via electric foot pedals.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The washing process is performed in a closed circuit, using a cleaning fluid heated up to 70°C. The solution is delivered through a spray gun nozzle at a pressure of up to 8 bar, thoroughly cleaning even hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both temperature and cleaning fluid significantly increase washing effectiveness. The unit features adjustable feet for leveling. The washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made of steel, cast iron, aluminum or other alloys. The washer lid is equipped with pneumatic cylinders, enhancing safety and ease of use. The washer features a dual-function spray gun: it can deliver only air or air mixed with cleaning fluid. Cleaned parts can be dried using compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure regulation - Manometer - Separate switch for detergent/water heating - Separate power switch Technical specifications: - Capacity: 160 L - Detergent heating: up to 70°C Kjdpjuc Tn Aefx Ah Dedu - Fluid tank capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 × 600 × 1330 mm - Adjustable air supply - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: the parts washer is supplied for self-assembly. Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels Kdsdpfxswc Rk Eo Ah Dsu - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: novo, Leto izdelave: 2021, Vă oferim spre vânzare 6 unități noi de dozatoare pneumatice fabricate din oțel inoxidabil electrolustruit, volum 18 kg, produse în Italia de către GMC, model 402E, complet echipate și gata de utilizare, incluzând: - 1 pistol manual de pulverizare de înaltă presiune cu debit reglabil, marca Wagner Air, model Colora SP5, duză 0,8 mm - 1 duză universală - 1 manometru - 1 furtun lungime 4 metri Dintre acestea, 4 sisteme sunt dotate cu pistol de pulverizare de înaltă presiune, iar 2 sisteme nu includ pistolul de pulverizare de înaltă presiune. Prețul pentru un sistem cu pistol de pulverizare de înaltă presiune este de 750 Euro. Prețul pentru un sistem fără pistol este de 650 Euro. Prețul pentru întregul pachet de 6 unități: 3.600 Euro. Kdodpfx Aetu Enqsh Dou Preț: 750 Euro + TVA, negociabil, FCA și ambalat Oradea, România. Vă rugăm să ne transmiteți o ofertă. Ne rezervăm dreptul la greșeli, modificări și vânzare intermediară.

Leto izdelave: 2024, Stanje: novo, Working chamber 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-proof negative pressure cabin in a robust sheet steel construction Work gloves Special rubber, wear-resistant, cotton lining on the inside, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight seal, double-walled, noise-insulated foam filling, lockable, with electrical safety interlock Abrasive recovery Via coordinated MHG recovery system Operation ON/OFF switch for extraction and lighting, pressure regulator, manometer, and foot switch Kdjdeh Hxubspfx Ah Dju Viewing windows

Stanje: novo, velikost pnevmatike: 315/80R22.5, Oprema: ABS, 🇬🇧 SEM. MENCI SA700G TIPPING BODY - CHASSIS TYPE SA700G - AXLE BRAND ROR CAMPANATO ETO - AXLE CONFIGURATION: 1 STEERING + 2 FIXED - DISC BRAKES - KNORR SYSTEM: 2 SENSORS / 2 CHANNELS, 1 LIFT AXLE - WHEELBASE 1310 - STANDARD LANDING LEGS - CHASSIS COLOR MENCI METALLIC GREY, WITH MANUAL ANTI-INTRUSION BAR - PENTA HYDRAULIC CYLINDER - ROUND TYPE BODY, STEEL CONSTRUCTION - BODY LENGTH 7450 mm - BODY HEIGHT 1840 mm - REAR DOOR B, 20° ANGLED - BODY CAPACITY 30 m³ - FLOOR THICKNESS 5.5 mm, HB 500 - SIDE WALL THICKNESS 3.5 mm, HB 500 - FRONT WALL THICKNESS 4 mm, HB 500 - DOOR THICKNESS 4 mm, HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG CLASP RELEASE - 2 SAFETY CLAMPS - BODY COLOR IVECO WHITE IC194 - SIDE BANDS COLOR BLUE RAL 5010 - DOOR WITHOUT SEAL - TMPS BRAND KNORR - REAR LIGHT SYSTEM EUROPOINT III - 10 SPEEDLINE DISCS 22.5x9.00, CENTER HOLE, FIXING D. 26 - 10 TYRES GY 315/80R22.5 KMAXSG2 - PREPARED FOR VIBRATOR - STAINLESS STEEL BOX 400x300x450 mm - STANDARD PRESSURE GAUGE - 2 TOWING HOOKS - QUICK DUMP WITH BUTTON VALVE - CRAMARO ELECTRIC ROLL COVER SYSTEM, TYPE C, WITH REMOTE CONTROL, BLUE RAL5010 - ARCH HEIGHT 500 mm - WHEEL HOOKS - POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE AT LOCATION. - FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS Ksdjvzh T Nspfx Ah Djdu CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL / INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Refrigerated Tipper – Lamberet - Schmitz Isuzu-Drop-side body-Crane-Tipper-4 Axles -4 Rear Axles -Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box bodies-Tail-lift - Refrigerated Cell-Insulated With Fridge - Van Domenico Truck srl accepts no responsibility for any discrepancies in equipment, options, or features that may differ at times from those described. Please verify the specifications of the specific vehicle.

Stanje: rabljeno, skupna masa: 34.000 kg, lastna masa: 4.950 kg, največja dovoljena obremenitev: 29.050 kg, konfiguracija osi: 3 osi, prva registracija: 10/2013, naslednji pregled (TÜV): 06/2026, vzmetenje: zračni dvigalo, velikost pnevmatike: 385/65 R 22.5, Leto izdelave: 2013, skupna dolžina: 25.500 mm, skupna širina: 33.700 mm, skupna višina: 97.300 mm, velikost sprednje pnevmatike: 385/65 R 22.5, velikost zadnje pnevmatike: 385/65 R 22.5, emisijski razred: noben, Oprema: ABS, ABS, proizvajalec osi BPW, kolutna zavora ET0, polnjenje od zgoraj, tlačna posoda, zračna vzmetenje z dvižno osjo – 1. os, izolirani rezervoar V2A, orodjarna, tlačna posoda 2,0 bar, dostop spredaj, 2 x hodniki s preklopno ograjo, Alcoa aluminijasta platišča, termometer, manometer za nakladanje, elektropoliran okvir iz nerjavečega jekla, izpust zadaj, naslednji zunanji pregled 07/2025, naslednji notranji pregled 08/2028 Kdsdpfx Ajxlk N Deh Dou

Stanje: zelo dobro (rabljeno), For sale: professional Ziegler FP 8/8 Ultra Leicht fire fighting pump (DIN 14420), manufactured in Germany in 1997. This is a premium-class unit in the Ultra Leicht version, designed for easy transport and ergonomic operation due to its lightweight construction. Technical specifications: - Model: FP 8/8 Ultra Leicht - Year of manufacture: 1997 - Rated output: 800 l/min - Rated pressure: 8 bar - Maximum output: 1,030–1,946 l/min - Rated speed: 4,400 rpm - Gear ratio: 1:1 Engine: - 2-cylinder petrol engine, air-cooled - 12V electric start - Reliable design, easy maintenance Condition: - Original hour meter: 142 engine hours – very low usage Ksdpfx Ahsxa Euqe Dedu - Complete and fully functional pump, ready for immediate operation - All manometers, control lights, and operating elements are in proper working condition - Control panel with German operator’s manual Applications: - Volunteer and professional fire departments (primary or reserve units) - Agriculture and industry for fast water transfer in large volumes - Flood protection, emergency dewatering - Fire service equipment enthusiasts and collectors

Stanje: novo, Specification for Pallet Sawing Machine R-1200 T (Model 2025) Technical Data: Ksdevvxavopfx Ah Dsdu - Main motor: 7.5 kW - Table width for pallet sawing: 1600 mm - Table length: 1000 mm - Diameter of band saw guide wheels: 600 mm - Saw blade: Bimetal, length 6850 mm, suitable for cutting steel Functions and Equipment: 1. Saw Head Lifting System: - Automatic lifting and lowering - Operated via hand and foot switches 2. Hydraulic Band Feed: - Stable and precise - Equipped with a manometer for monitoring operating parameters - Hydraulic accumulator for stabilizing the band saw blade 3. Safety Devices: - Main safety guard preventing access to the output area - Integrated conveyor for automatic removal of cut elements 4. Materials and Technology: - Heavy-duty bimetal saw blade, ideal for intensive use - Factory new machine, compliant with the latest occupational safety standards Machine Advantages: - High efficiency thanks to a 7.5 kW motor and precise band guidance - Fully automated saw head control for ergonomic operation - Safe design due to modern safety features and integrated conveyor - Versatile for recycling and processing wooden and steel pallets Applications: - Sawing pallets into individual components for further processing - Pallet recycling and recovery of raw materials - Production of wood elements and metal components.

Stanje: rabljeno, Moč: 5 kW (7 KM) Kapaciteta tovornega prostora: 10.000 l Proizvajalec: Olsa Model: – Leto: – Kakovost: nerjavno jeklo Kapaciteta: 1000 litrov Mešanje: 4,5 kW Hitrost motorja: 710 – 1440 obr/min Notranji tlak (bar): neznano, tlak je možen. Kdodpfx Asvlynmoh Deu Dovod zraka Manometer in notranji tlačni ventil Dvojni plašč: da Toplotna izolacija: da Nadzor T°C toplo/hladno: elektromagnetni ventili Opomba: čiščenje notranjih sledi možno v primeru prodaje

Stanje: rabljeno, skupna masa: 35.000 kg, največja dovoljena obremenitev: 29.240 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 25 m³, prva registracija: 06/2016, naslednji pregled (TÜV): 05/2026, Leto izdelave: 2016, Oprema: ABS, Zrak, dvig 1. in 3. osi, BPW bobnasta EBS, aluminijasta platišča, aluminijasta zložljiva opora, dostopna lestev, PVC polovični blatniki, zložljiv jekleni UFS, odsevna tabla, dno 5 mm, stranske stene in čelna stena 4 mm, zadnja stena 10/5 mm položno, pohodna površina z lestvijo, PVC navojna cerada s centralnim zaklepanjem, manometer za natovarjanje, znak A. Kdjdpfsxfd R Ijx Ah Deu

Stanje: kot nova (razstavni stroj), I-beam – upright 120 x 25 (ø 1600) mm Raw diameter max. 140 x 3 (ø 3000) mm Angle steel 100 x 100 x 10 (ø 1600) mm Square material 140 x 40 x 3 (ø 4000) mm I-beam – flat 200 x 35 (ø 1000) mm Solid material – diameter 70.0 (ø 800) mm Tool holder 100.0 mm Roll diameter 315 mm Rolling speed 5.4 m/min Total power requirement 11.0 kW Weight 2,240 kg Dimensions L-W-H 1,500 x 1,650 x 2,100 mm Equipment: - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower/side rolls * for extra small bending radii - Lower/side rolls individually adjustable - 3x driven rolls - Segmentally divided roll rings - Digital position display for lower/side rolls * TouchScreen function display - Hardened tool holder (42CrMo4) - Machine base frame - 2x hydraulically adjustable side guides - Horizontal and vertical operation possible Ksdoxcukyjpfx Ah Dsdu - Free-standing control panel - Manometer / pressure gauge for the rolls - CE mark / EU Declaration of Conformity - Operating manual in German

Stanje: kot nova (razstavni stroj), I-beam – upright 120 x 25 (ø 1600) mm Raw diameter max. 140 x 3 (ø 3000) mm Angle steel 100 x 100 x 10 (ø 1600) mm Square material 140 x 40 x 3 (ø 4000) mm I-beam – flat 200 x 35 (ø 1000) mm Solid material – diameter 70.0 (ø 800) mm Tool holder 100.0 mm Roll diameter 315 mm Rolling speed 5.4 m/min Total power requirement 11.0 kW Weight 2,240 kg Dimensions L-W-H 1,500 x 1,650 x 2,100 mm Equipment: - Electro-hydraulic ring/profile bending machine Ksdsxcuktepfx Ah Dodu - Hydraulic adjustment of lower/side rolls * for extra small bending radii - Lower/side rolls individually adjustable - 3x driven rolls - Segmentally divided roll rings - Digital position display for lower/side rolls * TouchScreen function display - Hardened tool holder (42CrMo4) - Machine base frame - 2x hydraulically adjustable side guides - Horizontal and vertical operation possible - Free-standing control panel - Manometer / pressure gauge for the rolls - CE mark / EU Declaration of Conformity - Operating manual in German

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, I-beam - vertical 100 x 20 (Ø 2100) mm Raw diameter max. 100 x 3 (Ø 3000) mm Angle steel 80x80x8 (Ø 2000) mm Rectangular material 50 x 25 x 2 (Ø 600) mm I-beam - flat 120 x 30 (Ø 600) max. 140w mm Solid material - diameter 60.0 (Ø 1000) mm Tool holder 80.0 mm Oil capacity 100 liters Speed 4.2 m/min Kdedpoxcukgefx Ah Deu Weight 1600 kg Dimensions L-W-H 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2 operating hours Condition as NEW Special price on request Features: - electro-hydraulic ring/profile bending machine - hydraulic adjustment of bottom/side rolls * for extra small bending radii - independently adjustable bottom/side roll - 3 driven rolls - segmented rolls - digital position display for bottom/side rolls * TouchScreen display - hardened tool holder (42CrMo4) - machine base frame - 2 hydraulically adjustable side guides - horizontal and vertical operation possible - movable operating console - manometer / pressure gauge for the rolls - CE marking / Declaration of Conformity - Operating manual in German

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, I-beam - upright 100 x 20 (Ø 2100) mm Max. raw diameter 100 x 3 (Ø 3000) mm Angle steel 80 x 80 x 8 (Ø 2000) mm Square material 50 x 25 x 2 (Ø 600) mm I-beam - flat 120 x 30 (Ø 600) mm, max. 140 mm width Solid material - diameter 60.0 (Ø 1000) mm Tool holder 80.0 mm Oil capacity 100 liters Speed 4.2 m/min Weight 1600 kg Dimensions L-W-H 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2 operating hours Condition as NEW Special price on request Equipment: - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower/lateral rollers * For extra small bending radii - Lower/lateral rollers individually adjustable - 3 driven rollers - Segmented roll segments - Digital position display for lower/lateral rollers * Display with touchscreen function - Hardened tool holder (42CrMo4) - Machine base Ksdpexcukmjfx Ah Djdu - 2 hydraulically adjustable side guides - Horizontal and vertical operation possible - Mobile control panel - Manometer / pressure gauge for the rollers - CE mark / declaration of conformity - Operating manual in German