Čez Brusilni Stroj nakup rabljenega (83.414)

Stanje: dober (rabljeno), Leto izdelave: 2001, STUDER S145 CNC Internal and External Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions: Centre Height: 175 mm Centre Distance: 200 mm Distance from workpiece spindle nose to grinding spindle carrier: 850 mm Cross Slide: Longitudinal Axis Z1: 500 mm Minimum programmable increment: 0.0001 mm Speed: 0.001 – 10,000 mm/min Kdedpfx Ast Hxv Ush Dju Resolution: 0.0001 mm Reversal delay: 0 - 9.9 s Transverse Axis X1: 120 mm Minimum programmable increment: 0.0001 mm Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Grinding Spindle Carrier: Turret grinding spindle carrier with 4 tool positions: 120 mm Bore: 100 / 120 mm External grinding attachment with wheel up to: 250 mm Fixed Workpiece Spindle Head: Speed range: 0-1,500 rpm Spindle nose with centering diameter: 85 mm Spindle bore: 50 mm Drive power: 3 kW Spindle torque: 30 Nm Load during flying grinding: 180 Nm Roundness accuracy in flying grinding: 0.0005 mm Spindle nose: Camlock 6 Control system: Fanuc Series 16 GC We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Stanje: rabljeno, Deckel brusilni stroj za gravurske dleta SOE z različnimi brusilnimi ploščami, različnimi vpenjalnimi čeljustmi + dodatki Kedpfexpimvsx Ah Dsdu

Leto izdelave: 2008, Stanje: rabljeno, Number of sanding units: 8 pcs Sanding width: 150 mm Inspection possible while still in operation! Leistomat - Finish and Intermediate Sanding Machine Löwer LZ 8 ----- For finish sanding (smoothing, de-burring, and edge rounding) or intermediate sanding of profiled window bars - Finish and intermediate sanding machine with eight sanding flap units 2 top surface sanding units (co-rotating/counter-rotating) 2 bottom surface sanding units (co-rotating/counter-rotating) 4 profiled sanding units arranged diagonally (top right, bottom right, top left, bottom left – all counter-rotating) - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all counter-rotating sanding units directly onto the incoming workpiece edges to avoid sanding through the primer at the end grain area. This allows the units to be set deeper into the profiles. Kdsdpoxpi D Uofx Ah Dju - Time-controlled withdrawal of the co-rotating units - Motorised workpiece thickness adjustment of the machine via height adjustment by push-button - Digital display of workpiece thickness via state-of-the-art magnetic tape system - Variable speed control of sanding flaps via frequency converter to adapt sanding intensity to different primers (200–1000 rpm) - Automatic workpiece width detection at machine infeed with automatic adjustment of the left sanding units to current workpiece width - Profile selection via selector switch at the machine infeed and automatic adjustment of sanding flap units to selected profile - Modern PLC control system for easy machine operation - Extraction port: 5 x 100 mm diameter - Dimensions (Frame): Length x Width x Height (mm): 2600 x 1500 x 1600 - Total length: 3600 mm (including roller conveyor with integrated workpiece width detection) - Operating voltage: 400V, 50Hz, 3P, Air supply: 6 bar - CE compliant Technical Data: Number of sanding units: 8 pcs Max. surface brush width: 150 mm Max. working height: 100 mm Surface brush motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed speed: 4–20 m/min, infinitely variable Sanding unit speed regulator Automatic width detection Digital magnetic tape measurement display Extraction nozzles: 5 x 100 mm Air requirement: 5 x 565 m³/h Minimum air velocity at machine connection: 20 m/s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg WITH infeed roller conveyor ----- Price for above configuration on request! The return conveyor shown in the photos is NO LONGER available and is NOT included in the scope of delivery. (Technical data according to manufacturer – subject to verification!)

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 4.000 mm, Main Technical Features Technical / Dimensional Data Max. swing diameter over bed: 900 mm Max. grinding diameter (with new wheel): 820 mm Max. grinding length: 4,000 mm Max. static workpiece weight on steadies: 3,000 kg Max. workpiece weight in chuck: 300 kg (max. overhang 250 mm from spindle nose) External grinding wheel dimensions (Ø × width × bore): 915 × 100 × 305 mm Peripheral speed of grinding wheel: 45–60 m/s Plunge grinding feed rate, roughing: 0.5–50 mm/min Plunge grinding feed rate, finishing: 0.001–0.01 mm/min Longitudinal grinding feed rate, roughing: 0.01–0.05 mm/min Longitudinal grinding feed rate, finishing: 0.001–0.01 mm/min Machine length: 9,200 mm Machine width: 3,800 mm Machine height: 2,630 mm Total weight (approx.): 25,800 kg Max. noise level (with all motors running): 80 dB Workhead Center angle: 60° Quill taper: Morse 6 Spindle connection: ASA 6 Spindle motor power (S1): 22 kW Speed range: 3–250 rpm Electric Tailstock Center angle: 60° Quill taper: Morse 6 Total quill travel (stroke + center eject): 78 + 15 mm Force sensor (max. indication): 10,000 kg Quill adjustment motor: 6.1 Nm Tailstock body longitudinal movement motor: 0.18 kW Grinding Wheel Dimensions Outer diameter: 915 mm Width: 100 mm Bore: 305 mm Max. wheel width: 130 mm Min. permissible wheel diameter (worn wheel): 630 mm Grinding Slide / Axis Feed Peripheral speed of grinding wheel: 45–60 m/s Max. grinding spindle speed: 2,000 rpm Grinding spindle drive (brushless, AC): 37 kW Cross axis X – servo motor (brushless): 7 Nm Cross axis X – rapid traverse manual: 7,000 mm/min Cross axis X – rapid traverse automatic: 10,000 mm/min Cross axis X – travel: 510 mm Longitudinal axis Z – servo motor (brushless): 14.7 Nm Longitudinal axis Z – rapid traverse manual: 7,000 mm/min Longitudinal axis Z – rapid traverse automatic: 15,000 mm/min Longitudinal axis Z – travel: 4,300 mm Additional slide Z2 (taper grinding) – servo motor: 7 Nm Z2 – rapid traverse manual/automatic: 7,000 mm/min Z2 – travel: 360 mm Grinding head swivel B-axis: ±7° B-axis quick swivel speed manual: 0.3 mm/rev B-axis quick swivel speed automatic: 0.4 mm/rev B-axis drive (brushless, with gearbox): 2.15 Nm Standard Equipment Siemens Sinumerik 840D CNC control, PCU50, Windows XP Pro SP2 Marposs E82 gap control safety device Hydraulic unit for various machine functions Hydraulic unit for automatic lubrication Oil unit for hydrodynamically supported grinding spindle Hydrodynamic grinding spindle Electric tailstock with load cell and digital contact force display 1 grinding wheel flange Ø 305 mm 2 dead centers, carbide-tipped, Morse 6, with draw-off nut Balancing arbor for grinding wheel Ksdpfx Aexni Sioh Dsdu Tie rod and brackets for anchoring the machine Modem for remote access and CNC data transfer Service tool kit Geometric inspection protocol Hook for wheel change Glass linear scale on X-axis (with additional backup encoder) Optical rotary encoder for B-axis angular positioning Optional Equipment (included) Increased center height 450 mm 1 additional grinding wheel flange Ø 305 mm Special grinding head for taper grinding in longitudinal grinding mode

Stanje: rabljeno, Description: Workpiece Headstock: Swivel range: -10°/+100° Rotational speed: 800 rpm Centre height: 175 mm Internal taper: Morse taper 5 (MK5) External short taper: DIN 55026 Maximum workpiece weight: 150 kg Grinding Spindle Headstock: Design: Tandem grinding spindle headstock B axis: -210°/+30° Internal grinding attachment: internal grinding spindle Grinding Table (X axis): X axis travel: 320 mm Maximum speed: 7.5 m/min Resolution: 0.1 μm Lower Table (Z axis): Centre distance: 1,000 mm Z axis travel: 1,150 mm Maximum speed: 15 m/min Resolution: 0.1 μm Equipment / Accessories: Coolant supply: coolant system with filter Emulsion mist extractor: mechanical Tailstock: MK4, stroke 50 mm Kdsdpfx Aowz T Azoh Dju Workpiece measurement I: Movomatic TMP 91 Workpiece measurement II: Movomatic TNU 91 Tool measurement: Marpos A 90 Setup operation: electronic handwheel Accessories: various flanges, centres and chucks

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Univerzalni precizni zunajkrožni brusilni stroj Studer S32 + Seckler avtomatizacija Cylindrical grinding Proizvajalec: Studer AG, Švica Tip: Studer S 32 + Seckler Modulo 300 Automation Krmiljenje: Fanuc 16 i TB CNC Leto izdelave: 2006 Ksdpfxowzbybe Ah Dodu Stanje: vzdrževan, originalen Teža stroja cca.: 6.000 kg Dodatna oprema: Po fotografijah Dokumentacija Sistem za hlajenje Ogled pod napetostjo je možen v kratkem. Za dodatna vprašanja smo vam z veseljem na voljo. Cena: iz skladišča tukaj, brez DDV Stanje: dobro – pripravljen za predstavitev Dostava: iz skladišča – kot je bilo ogledano Plačilo: zgolj neto – po prejemu računa Vmesna prodaja in napake pridržane. Prosimo za vaše naročilo. Več strojev in naprav je na voljo iz skladišča – prosimo povprašajte. Veselimo se vašega povpraševanja.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Kodpovca Izjfx Ah Dsdu Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1997, Geldmacher brusilni stroj za graverska dleta GS 10 s kompletom vpenjalnih tulec Ksdpfx Ahsxpfc To Djdu

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 437, Avtomatski brusilnik za okvirne žage VOLLMER CABG50U, popolnoma delno obnovljen. Širina žaginega lista do 200 mm Dolžina zobčenja do 1650 mm Debelina lista do 6 mm Delitev zob 25 mm ali 30 mm (ekscentrični disk prisoten) Višina zoba do 25 mm Oblika zoba: ukrivljen zob Kot reza od -10 do +25 stopinj Oblika zoba Kdsdpfxsxp Hl Ae Ah Dju

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Zunanja cilindrična brusilka izdelana v Nemčiji v masivni konstrukciji. Izjemno natančna in pripravljena za uporabo. Predhodni lastnik: nemški strojni proizvajalec. Stroj je bil leta 2008 generalno obnovljen vključno z RETROFITOM CNC krmiljenja in pogonov. Proizvajalec SCHMALTZ Model R 5-3000 Leto izdelave 1971 Maks. premer obdelovanca: 630 mm Maks. dolžina obdelovanca: 3000 mm Premer brusnega koluta: 800 mm Moč motorja brusnega koluta: 30 kW Hitrosti brusnega koluta: 500 / 1000 o/min Hitrosti vretena obdelovanca: 12–150 o/min Skupna teža: 15 ton Oprema in dodatki: - Prenovljena in nadgrajena leta 2008 - Popolnoma opremljena z: - EMAG profilirnik brusnega koluta s CNC krmiljenjem Siemens 840 D - Heidenhain digitalni prikazovalnik DRO Kjdpfx Asxnhxzeh Dodu - Merilna enota Marposs E9 - 11 lunet - Rezervoar za hladilno tekočino s filtrirno napravo

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: SIEMENS Model: Sinumerik 840 D Kdedpfoxnr Imsx Ah Dou Ta CNC valjčna brusilka GEIBEL & HOTZ RS 2000 je bila izdelana leta 2002. Ima višino med konicama 230 mm, razdaljo med konicama 2000 mm in največji premer brušenja 355 mm. Opremljena je s krmiljenjem Siemens 840 D, pogonska moč zunanje brusilne vretena je 9 kW, notranje brusilne vretena pa 2,2 kW. Skupna masa stroja je 10.000 kg. Za dodatne informacije o stroju nas kontaktirajte. Področja uporabe Brušenje

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1987, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, Prosimo, povprašajte po e-pošti. Kdsdpfxoxmiqco Ah Dsu

Leto izdelave: 1994, Stanje: dober (rabljeno), Manufacturer: Rollomatic Year of manufacture: 1994 Model: CNC 24-F Kdodpfewhznxsx Ah Dou Machine number: 142 3 x 380 V, 50 Hz

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodam rabljeni Kellenberger okrogel brusilni stroj v zelo dobrem stanju. Cena močno znižana !!!!! Kjdoxnxidjpfx Ah Dodu

Stanje: rabljeno, Avtomatski Bäuerle brusilni stroj za nože ali ploskovni brusilnik za skobeljne, sekalne nože ali podobno. Brusilni motor: 1 kW Dolžina noža: 800 mm Kjdpfx Ahexl A Tze Dsdu

Stanje: dober (rabljeno), Centre bore: 2-50 mm Workpiece diameter: 8-125 mm Workpiece length: 50-1000 mm Grinding wheel speed: 13,000-45,000 rpm Ksdpfxjrivluo Ah Djdu Various accessories MARCELS MASCHINEN AG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Prodam zelo lepo ohranjen brusilni stroj zaradi z prečnim trakom,zaradi upostitve dejavnosti. Zelo malo rabljen Kjdpfx Ahoun Igfj Dodu

Stanje: rabljeno, Leto izdelave: 2008, Tukaj je nekaj ključnih podatkov: - CNC univerzalni cilindrični brusilni stroj WUG 21 osnovni stroj podjetja CNC-Technik Weiss. (WUG 21 je Karstensovo ležišče stroja, na katerega je zgrajen CNC.) - Leto izdelave 2008 / obratovanje največ v eni izmeni - Medkončna razdalja 1000 mm - Vpenjalno vreteno in konjiček MK4 - Premer diska do 500 mm - Položaj brusnega diska pod kotom 26,5° poševno - Pogon brusnega diska s programirljivim SUG - Brusilni vretenik ročno vrtljiv na zračnem ležišču - Brusni disk na desni strani - Vgrajena notranja brusilna enota zadaj, vključno z naprav za oblačenje - Krmilje Eckelmann - DIN programiranje - Ciklni programi - Ročno brušenje, da - Avtomatsko oblačenje - Marposs zaznavanje vibracij za zunanji brusni disk vključno s programsko opremo - Brusilno vreteno in vreteno za obdelovanec z jermenskim pogonom Kdjdpfxjxnqb Ej Ah Dou

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Krožna brusilka Kellenberger 1000U z veliko dodatne opreme na voljo po ugodni ceni. Skupno so na prodaj 3 stroji. Vsi stroji so v zelo dobrem stanju in popolnoma delujoči. En stroj je bil kupljen kot generalno obnovljen leta 2019. Kdodpfoxnxhmjx Ah Dsu Cene so po dogovoru. Cena za vse 3 stroje vključno z veliko dodatne opreme (brusilni koluti itd.) Cena močno znižana!!!!!

Stanje: zelo dobro (rabljeno), with internal grinding attachment Centre height: 125 mm Kdodpfx Aeiu E Trjh Dou Centre distance: 600 mm Grinding wheel: 400 x 40 x 127 mm Various accessories MARCELS MASCHINEN AG

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kellenberger okrogla brusilka v zelo dobrem stanju. Ugodno naprodaj. Cena močno znižana !!!!! Kdedpfx Ajxnxgijh Dsu

Stanje: generalkompletno obnovljen (rabljeno), Machine completely overhauled With digital display Centre height: 175 mm Kdjdpewhk Uuofx Ah Dju Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm With internal grinding attachment Various accessories included MARCELS MASCHINEN AG

Stanje: zelo dobro (rabljeno), Centre height 180 mm Centre distance 1000 mm Grinding length 650 mm Grinding wheel 500 x 80 x 127 mm + 250 x 32 x 127 mm With internal grinding attachment Kdsdpfx Asvhafdoh Dou Various accessories MARCELS MASCHINEN AG

Stanje: dober (rabljeno), Dividing head Collets Kdjdpfx Ascfp Ryjh Deu Table size 270x80 mm Longitudinal travel 120 mm MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Centre height 300 mm Centre distance 3500 mm Grinding wheel 760 x 305 x 100 mm With digital readout With MARPOSS measurement control Ksdpfx Astpgnhjh Dedu Various accessories MARCELS MASCHINEN AG