Tračna žaga

MEP PH 261-1HB

Stanje: novo, Model designation: PH 261-1 HB Fgjdpol H Dydjfx Ah Njd

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Fgodpfx Asg Trvrjh Nod Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice.

Stanje: novo, Cutting diameter: 225 mm Cutting capacity at 90° (flat): 245 x 150 mm Cutting capacity at 90° (square): 200 x 200 mm Cutting capacity at 45° (flat): 160 x 140 mm Fodpjxaa Dysfx Ah Njgd Cutting capacity at 45° (round): 160 mm Cutting capacity at 45° (square): 140 x 140 mm Cutting capacity at 60° (flat): 110 x 80 mm Cutting capacity at 60° (square): 90 x 90 mm Cutting capacity at 60° (round): 90 mm Vice opening: 245 mm Blade speed range: 46/92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 240 kg Space requirement: approx. 1,530 x 900 x 1,720 mm Equipment: - Compact, robust manual bandsaw - Single-sided mitre device up to 60° to the left - Hydraulic lowering of the saw bow * Infinitely variable feed adjustment * Automatic shut-off at end of cut - 2x bandsaw speeds - Carbide-tipped blade guides - Manual vice with quick-release - Machine stand - Coolant system - Manual blade tensioning (star knob at the front) - 1x angle stop - 1x metal bandsaw blade - Operating manual

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch - Emergency stop Fgsdpfx Ajgg N Twjh Ned - Documentation - 400V

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch Fsdpfxjlb I Dao Ah Nogd - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Fgsdjudi Unopfx Ah Nod Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland.

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm Fgsdpfx Ahsgin Nde Njd - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Fgodpfx Ahowzzgne Nsd Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 68131, Cut-off saw diameter max.: 300 mm Cutting range round: 100 mm Saw head swivel angle up to: 45° Vice clamping range up to: 160 mm Cut-off saw speed: 2,500 rpm Drive motor: 230 V, 1.1 kW Space requirement: 850 x 750 x 1,500 mm Weight: 126 kg Fjdpfx Ahefug Exs Negd

Stanje: dober (rabljeno), Leto izdelave: 1992, Offer 23426 Technical Data: - Cutting range at 90° round: 420 mm - flat: 635 x 290 mm - Cutting range at 45° round: 360 mm - flat: 420 x 300 mm - Saw band dimensions: 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds: 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vice - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 2.2 kW - Coolant system - Machine mounted on rotating chassis - Powered infeed roller conveyor: 4000 mm Fodpfx Asrl Irveh Negd - Outfeed roller conveyor with length stop: 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller conveyor weight approx. 2000 kg