Stroj Za Odstranjevanje Pip, Okvarjen nakup rabljenega (94.357)

Leto izdelave: 1985, stanje: potreben popravila (rabljeno), Removing machine for thread taps Gbedpfxei Huvhe Adker - Sold as seen, in current condition - Power consumption: too high, machine offered as a source of spare parts - Manufacturer: Electro ARC, removing machine for thread taps or similar tools - Clamping table: 660 x 460 mm - Throat depth: 250 to 480 mm - Column diameter: 70 mm - Dimensions: 930/780/H2045 mm - Weight: 402 kg

Stanje: dober (rabljeno), Min.-max. tube length: 100–1800 mm Gjdpfx Aeq U Rccodkobr The machine was previously used for deburring cut tubes!

Stanje: rabljeno, Stroj za odstranjevanje ostrih robov, strojno obdelavo površin, vibracijski stroj za poliranje, vibracijski stroj za brušenje, rabljen stroj. Proizvajalec: Vibrochimica Tip: VBTS 651/3 Godpfxjzka Dzj Adkebr Zunanje mere: 2260 x 1870 x 1450 mm Letnik: 2008 Teža: 1160 kg Električni podatki: 400 V; 5,5 kW d: 840 mm D: 1340 mm Premer torusa: 430 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Boschert Brushing Deburring Machine Model K3 for deburring straight sheet metal edges and at the lateral aggregate suitable for cut-outs and notches up to 70 mm depth as well as outside radii on sheet metal. 3 motors, each 1.5 kW Brush diameter: 300 mm Brush material: wire brushes VA/steel Material thickness range: 0.8–8 mm Machine dimensions: Gbedetr Avispfx Adkjr Width: 1400 mm Height: 580 mm Depth: 670 mm Base frame: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is guided through the machine. For heavy burrs, the motors can be switched to operate together so that both remove the heavy burr from above. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table extension serves as a storage surface.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, moč: 19 kW (25,83 KM), DM1100 DC EVO Odstranjevanje trdne žlindre Zaobljanje robov do širine 1100 mm. DM1100 DC EVO odstranjuje ostrine in zaobluje notranje in zunanje konture debelih jeklenih delov, ki so bili večinoma izrezani s plazmo ali plamenom. DM1100 DC je opremljen z velikim valjem za odstranjevanje ostrih robov in dvema protismerno vrtečima se prečnima pasovoma. Ti zagotavljajo zaobljanje robov z enakomernimi in mehkejšimi robovi. Gedpotzkg Ujfx Adkjbr Ta stroj izstopa zaradi vertikalno premikajočega se brusilnega valja za izravnavo toleranc ter širokega magnetnega območja, ki omogoča varno obdelavo tudi majhnih delov. DM1100 DC Delovna zmogljivost (mm) 1100x120 Število brusilnih valjev (D) 1 Število postaj s prečnim pasom (C) 1 Specifikacije brusilnih valjev Ø435mm 20SH Dimenzije brusilnega pasu (mm) 1150x1520 Hitrost brusilnega valja (vrt./min.) 185-650 Hitrost prečnega pasu (m/s) 2-8 Hitrost podajanja (m/s) 0,5-4,0 Motor brusilnega valja (kW) 11 Motor prečnega pasu (kW) (2x) 3 Motor za podajanje (kW) 0,37 Skupna moč (kW) 19 Priključek za sesanje prahu na glavo (Ø mm) (2x) 150 Dimenzije (mm) 2258x2900x2220 Teža (kg) 4100

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Ponujamo dvostransko strojno orodje za odstranjevanje robov cevi. Premer cevi: 8 mm. Število obdelovalnih postaj: 2. Vključno z orodji za odstranjevanje robov in nadzorno omarico. Ogled na licu mesta je možen. Gedpfx Adjzrn Nusksbr

Stanje: rabljeno, številka stroja/vozila: 27977, Eyeletting machine Hang 103LO, Serial No. 27977 Online video inspection via Skype video We would be pleased to welcome your visit – more machines available in stock Immediately available – inspection possible In stock in Emskirchen / Nuremberg – test run possible Gbjdpfjh Axgcox Adker

Stanje: rabljeno, številka stroja/vozila: 11388, Eyeletting machine Hang 103SP, Serial-No. 11388 Online video inspection possible via Skype Gsdpfoh Axggex Adkjbr We would be pleased to welcome your visit – more machines in stock Available immediately – viewing possible Located in Emskirchen / Nuremberg – Test run possible

Stanje: rabljeno, številka stroja/vozila: 14889, Eyeletting machine Hang 103 SP, SN 14889 / Serial No. 14899 Foot-operated Online video inspection via Skype possible. We would be pleased to welcome your visit – further machines in stock. Gbsdpsh Axz Nofx Adkjr Available immediately – ready for inspection. Located in Emskirchen/Nuremberg – machine can be tested on site.

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm CNC deburring cell, Gsdpfxst Hwu Nj Adkebr with 2 pallets / 10 WW / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring center

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Gbjdpfst Hw Iijx Adkor Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Gbodpfx Ajt Hw Shjdker Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Gsdov R U Ifopfx Adkjbr Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Gbsdpfx Adetnf Rroksr Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg

Stanje: rabljeno, Širina reza: 430 mm Hitrost rezanja: 24 m/min Največja vhodna višina: 90 mm Vrzel med rezili: 0 - 5 mm Minimalna dolžina obdelovanca na dovodnem traku: 400 mm Gjdpfet Uqbfex Adkebr Dovodni trak: 850 x 425 mm Odtokovni trak: 650 x 425 mm Skupne dimenzije (Š x V x G, z/ brez odtokovnega traku): 800 x 1190 x 1660 / 1210 mm Teža (z/ brez odtokovnega traku): 225 / 210 kg Moč motorja: 0,75 kW Električni priklop: 3~ 400 V, 50 Hz, 16 A Stisnjen zrak: ni potreben

Stanje: rabljeno, Stroji za odstranjevanje kože Maja Tip: ESB 3441 Moč: 1,1 kW Napetost: 380 V Dimenzije: 70x114x95 cm Gbjdpfsrgar Tex Adkor Dobavni rok: 10 delovnih dni po prejetju avansa

Stanje: rabljeno, Stroj za odstranjevanje kože Iz nerjavečega jekla Proizvajalec: Maja Model: BXA 554 Dimenzije: 1250x1050x2000 mm Napetost: 400V 50Hz 3N Električna moč: 1,1 kW Širina noža: 554 mm Gbedpfer D Rh Nex Adkjr

Stanje: rabljeno, Model: David 200 naprava za odstranjevanje ščetine in plamenjenje Gbjdpfjtq T Tkjx Adksr Kapaciteta zakola: približno 40–50 prašičev na uro Primerno za prašiče do približno 270 kg Ohišje stroja iz vroče cinkane ali nerjaveče pločevine Vgrajena električna omarica Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Mere stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250

Stanje: rabljeno, Tip: David stroj za oparjenje in osmoditev svinj Kapaciteta klanja: približno 40-50 prašičev/uro Največja teža prašičev: do približno 270 kg Godpeg Swz Hofx Adkobr Ohišje stroja: vroče cinkano ali iz nerjavečega jekla Vgrajena elektro omara Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Vgradne dimenzije stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250 Dobavni rok: po prejetem avansnem plačilu je stroj običajno obnovljen in pripravljen za dobavo

Stanje: rabljeno, Stroji za odstranjevanje kože Maja Gbodpfxoqlcbks Adkor Dimenzije: 70 x 85 x 120 cm

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Ponujamo strojno opremo za odstranjevanje ostrih robov – Bütfering. Največja delovna širina: 1350 mm, podajalna hitrost: 20 m/min, stopnje obdelave: 3, 1. stopnja obdelave: brusni trak, 2. stopnja obdelave: 2 vrsti krožnih čopičev, 3. stopnja obdelave: polirni trak, minimalna in maksimalna debelina obdelovanca: 0,5 mm/100 mm, maksimalna debelina materiala: 100 mm. Vključuje poškodovan transportni trak in brusne trake. Dimenzije stroja: 2000 mm/2050 mm/3400 mm, teža: približno 6000 kg. Ogled je možen po predhodnem dogovoru. Gbedpfx Adozl U I Djker

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 5542 Delivery time: prompt, subject to prior sale Country of origin: Italy Price: €11,600 In stock: 1 Working width: 1300 mm Sheet thickness range – mild steel: 150 mm Brush diameter: 150 mm Vacuum area: 250x350 mm Table height: 945 mm Motor: 0.75 kW Length: 1400 mm Width: 1000 mm Height: 1450 mm Weight: 300 kg Demonstration machine / as new condition Net price (New price: €13,600) The Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding, and polishing for different types of materials – stainless steel, steel, copper, brass, and aluminum. The grinding head, equipped with two rotating tools (grinding disc or brush), is mounted on a swivel arm. The Easy T features freely adjustable speed and a vacuum system, allowing workpieces to be securely fixed on the table. It is a cost-effective and efficient solution for conventional grinding and deburring. All edges of the workpiece can be processed from any angle and direction. The grinding head swivels 180°, enabling quick changes of the grinding tool. Features: * Grinding pressure is applied manually * Easy to operate, low cost The flap brush ensures rounding of the workpiece edges. Standard brushes have a diameter of 150 mm. For deburring the product, a support pad with a grinding disc is used. Depending on the height and hardness of the burr, the grinding disc can be adjusted at a slight angle to apply more pressure on the burr. BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos & functional videos of the current condition Godpfewiryhox Adkobr • LIVE CHECK ON SITE: Live testing at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Stanje: novo, Leto izdelave: 2025, Available from stock! Deburring and fine grinding machine with 3 working stations: Abrasive belt – Brush station – Abrasive belt Gedpepwh Tfefx Adkobr Effective maximum working width: 1150mm Standard workpiece thickness: 0.8 – 150mm Digital workpiece thickness display on the control panel, accuracy 0.1mm Adjustable pressure rollers before and after the working stations Abrasive belt insertion on the left Abrasive belt centering by electronically controlled photo cell, emergency stop in case of tracking error or belt breakage Infinitely variable conveyor feed speed Includes the following options: Preparation of machine base for forklift loading Extraction collector in galvanized sheet metal for machine with 3 working units plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces on the feed belt. Includes perforated feed table and belt, as well as a high-performance electric fan and sound-insulated outlet in accordance with CE standard, 5.5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the operator panel, stand-by position with pneumatic return of the contact roller in case of emergency stop Frequency controlled drive motors for abrasive belt cutting speed, motor power per unit: 11kW Electronic adjustment of the brush unit HMI Vision – PLC control with visualization of various machine settings via color touch screen Storage capacity of up to 250 grinding programs

Stanje: rabljeno, Leto izdelave: 2012, Delovna širina: 1350 mm Debelina obdelovanca – maks. 160 mm Masa stroja: približno 4000 kg Oprema: - Sistem za odsesavanje prahu - Nadomestne krtače - Navodila za uporabo Gbsdpfozkvyfox Adksr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, hitrost pomika os X: 4 m/min, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 102 mm, skupna dolžina: 2.300 mm, skupna širina: 2.600 mm, skupna višina: 2.500 mm, skupna masa: 4.000 kg, delovna višina: 950 mm, dolžina obdelovanca (maks.): 102 mm, Double-sided deburring in just one pass – with 100% reproducible results and precise processing of both internal and external edges: only the EdgeRacer 1500 D offers this. Gbodpfxjucw Rbs Adkjr The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brushes working from above and below can be adjusted independently. Thanks to the roller conveyor, the adjustment can also take place below or above roller table level.