Sidel Stroj Za Pihanje nakup rabljenega (86.991)

Stanje: novo, Parts for SIDEL blow moulding machine: - Ball bearings - O-rings - Nozzle Nedpfxsiqum Ie Agxjla - Belts - Shaft

Stanje: rabljeno, Leto izdelave: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical details Capacity: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Nsdpfonpbhvox Agxjla

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good and well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 cavities and 10 heating modules. Operates with a variety of bottle sizes and designs from 0.25 to 3 liters. Two-stage PET stretch blow molding machines from Sidel require pre-manufactured preforms to be fed into the machine. Separating the processes for producing bottles and preforms allows for production optimization, greater operational flexibility, and provides a higher production capacity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom of support ring) Minimum ID of neck: 19 mm Maximum OD of neck: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle capacity: 0.25 – 3 liters TYPICAL PREFORM WEIGHTS (for still and carbonated liquids) 0.25 liter bottle: 14-20 grams 0.50 liter bottle: 20-33 grams 1.00 liter bottle: 26-40 grams 1.50 liter bottle: 35-51 grams 2.00 liter bottle: 44-58 grams 3.00 liter bottle: 68-84 grams BLOW WHEEL Height: 3.5 meters Number of cavities: 6 Clamping force: 10 tons Item height (below neck) at discharge: approx. 1.4 meters Machine DC drive motor power: 4 kW Nlodjg Ailcepfx Agxja HEATING UNIT Height: 2 meters Number of oven heaters: 10 Number of heating zones per module: 8 Maximum power: 170 kW ELECTRICAL REQUIREMENTS Maximum supplied power: 200 kW Average consumption: 100–150 kWh (varies with bottle produced) COMPRESSED AIR Available supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies with bottle produced) Blow pressure – Standard base: up to 25 bar Blow throughput – Standard base: 110–550 Nm3/h Blow pressure – Petaloid base: up to 35 bar Blow throughput – Petaloid base: 155–770 Nm3/h CHILLED WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 m3/h Heat dissipation: up to 16,000 kcal/h WEIGHT Blow wheel with molds: 8 tons Heating unit: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING UNIT The preforms are transported with the necks facing upward to the heating unit. This module ensures that preforms are rotated before passing neck-down in front of the heating elements, and again afterward. During the heating phase, the preforms are rotated and the necks are shielded from heat to optimize thermal distribution without distorting the neck. Heating is performed via 10 heating modules. Each module can accommodate up to 8 horizontally-stacked IR lamps, with air-cooled ends. The heating output of the 8 zones—matching the 8 lamp rows—is adjustable to optimize the temperature profile. These zones are regulated across all SBO models. After heating, an IR camera monitors preform temperature, enabling automatic adjustment of the controlled zones to maintain the required temperature at all times.

Stanje: rabljeno, Geschwindigkeit: 8.000 Flaschen pro Stunde mit 0,5-Liter-Flasche. Verschiedene Formate sind optional möglich. Der Abbau wurde Anfang Februar 2018 von der Seegräber GmbH durchgeführt. Im Lieferumfang enthaltene Maschinen: - SIDEL SBO 6 Blasmaschine, 2006 komplett von SIDEL überholt - Preform-Magazin und Preform-Elevator Kompressor, Kühlung und Formen sind nicht enthalten. Nledpfxjxytvis Agxoa

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 39.000 h, številka stroja/vozila: SO134, Technical Data & Performance Characteristics This Nissei ASB ASB-50MB is a one-step, biaxially oriented stretch blow molding machine engineered for precise PET bottle production. Featuring a compact, rotary indexing platform, it integrates injection molding and stretch blow molding in a single cycle, ensuring exact neck finishes and uniform wall thickness distribution. This pre-owned machine offers reliable performance for beverage manufacturing and industrial packaging projects seeking a proven, cost-efficient solution. Manufacturer: Nissei ASB Engineering Model: ASB-50MB Year of manufacture: 2010 Process: One-step ISBM (Injection-Stretch-Blow Molding) Production speed: approx. 1,000 bottles/hour (bph) with 4 cavities Cavities: Current configuration 4 (supports 1–6 cavities depending on the article) Bottle formats: 40 ml to 750 ml Container type: PET bottles Electrical data (nameplate): Heater 400 V AC, 6.1 kW; Motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 Hz Installed power (approx.): 25.35 kW Advanced Automation & Control Systems The ASB-50MB platform provides stable, repeatable operation with synchronized control of the injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing coordination between stations and supports high-quality bottle formation in a compact footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls supply accurate temperature profiles for consistent preform conditioning. Rotary indexing one-step system with coordinated station control Dedicated heating power zone for precise thermal management Structured power supply at 50 Hz for stable operation Designed for rapid tooling and format changes within the compatible size range Integrated safety enclosures and interlocks for secure machine access Production Line Integration This stretch blow molding machine can be seamlessly integrated into a used bottling line or operate as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling machines in beverage and other industrial packaging applications. Njdpfsyhbf Ajx Agxsla Standalone or inline configuration with downstream filling equipment Compatible with standard conveyor interfaces Format flexibility for 0.04 L to 0.75 L PET bottles Suitable for water, juices, carbonated soft drinks (CSD), and other PET applications in conjunction with suitable downstream systems Machine Condition & Maintenance History This used ASB-50MB is in operational condition. The machine has approximately 39,000 operating hours, corresponding to typical industrial usage, and still retains solid performance potential for new production environments. Operational readiness: operational Operating hours: approx. 39,000

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 33.000 h, številka stroja/vozila: SO135, Technical Data & Performance Specifications This single-stage, biaxially oriented stretch blow molding machine provides uniform PET bottle production with reliable throughput and a compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection molding, conditioning, and blow molding within a single machine, reducing handling steps and improving quality control—ideal for a used bottling line requiring a dependable supply of PET bottles. Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB) Model: ASB-50 MB Machine type: Single-stage biaxially oriented stretch blow molding machine Year of manufacture: 2006 Production speed: approx. 1,000 bottles/hour with 4-cavity mold Cavities: Configurable 1–6; supplied in 4-cavity configuration Formats: 40 ml to 750 ml (typical PET bottle sizes in this range) Containers: PET bottles Power supply: 400 V, 50 Hz Installed power (observed): approx. 20.1 kW Motor circuits: 380 V AC — 13.5 kW; 200 V AC — 0.5 kW Heating circuits: 400 V AC — 6.1 kW Advanced Automation & Control Systems The ASB-50 MB platform enables precise regulation of heating and stretch-blow parameters for consistent bottle quality across different formats. Standard single-stage automation synchronizes injection, conditioning, and blowing stations for reproducible results, with integrated interlocks and safety guards for operator protection. The quick-change mold system supports efficient format changes and minimizes downtime during product changeovers, as typical in industrial packaging and beverage production lines. Line Integration Capability Designed for PET bottle production upstream of filling, capping, and labeling machinery, this machine integrates effectively with conveyors, accumulation tables, and downstream filling equipment. The single-stage process eliminates the need for separate preform handling devices (like unscramblers, tippers, and elevators), simplifying line layouts in a used bottling environment. Format flexibility from 40 ml to 750 ml supports applications for water, juices, carbonated soft drinks (CSD), and other beverages, with appropriate molds. Nedpfxeyhbfie Agxsla Machine Condition & Maintenance History This used machine is offered in ready-to-operate condition and is suitable for immediate integration into an existing beverage production or packaging plant. As with any used stretch blow molding equipment, commissioning checks and routine maintenance are recommended to match installation with local utility conditions and product specifications. Operational Performance & Versatility The ASB-50 MB delivers stable output of approx. 1,000 bph in 4-cavity setup, with the option to reconfigure up to 6 cavities depending on tooling and process parameters. ...

Stanje: dober (rabljeno), Leto izdelave: 2003, Proizvajalec: MTF Technik Schürfeld GmbH & Co. KG Nljdpfx Aeyxwimjgxsa Tip: PZ 255 B Serijska številka: 11515 Leto izdelave: 2003 Napetost: 230 V Frekvenca: 50 Hz Motor puhala: FD 370 zunanji rotor Moč puhala: 0,37 kW

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: SO133, Technical Data & Performance Specifications The SIPA SFR EVO3 is a rotary stretch blow molding machine designed for highly efficient production of PET bottles in modern beverage facilities. As a robust used piece of equipment for industrial packaging, it delivers reliable performance for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and accommodates a broad range of bottle sizes commonly used in the water and soft drink sector. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Nljdpsyhbihefx Agxoa Production speed: up to 18,000 bottles per hour Number of cavities: 8 Thread/Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L formats Container type: Designed for handling PET bottles Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing cycles. Operator-friendly HMI and PLC-based controls support recipe management, process monitoring, and rapid format changes. The machine architecture emphasizes repeatability of pre-blow and blow phases, ensuring stable bottle quality even at high production speeds. Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change features to support fast format changeovers Safety-interlocked protective covers and emergency stop switches for operator protection Integration Capability into Production Lines This blow molder can be seamlessly integrated into used PET filling lines, either as a stand-alone unit ahead of a filler or synchronized within a complete beverage production line. The supplied preform feeder and preform cooling systems facilitate smooth handling and stable production conditions, thus enhancing the overall efficiency of the line. Inline or stand-alone operation with standard conveyor interfaces Compatible with downstream filling, capping, and labeling machinery Flexible handling of 0.5L, 1.0L, and 1.5L formats Suitable for upgrades or capacity expansions of used packaging machines Machine Condition & Maintenance History The machine is currently in operation, demonstrating its readiness for deployment in an active production environment. Built in 2017, it offers a modern platform for operators seeking reliable performance and repeatable quality in PET bottle production. Its status as a fully functional used machine makes it a strong candidate for rapid integration into industrial packaging lines. Operating Performance & Versatility With 8 cavities and up to 18,000 bph, the SFR EVO3 combines speed and quality for demanding beverage...

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.065.0, vpenjalna sila: 200 kN, New digital control system from BBM Nsdpfx Agow Dcyboxola Two sets of extruder heads (see attached pictures)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, W 115| KOSME STROJ ZA PIHANJE PET Model: KSB6R Leto: 2017 Hitrost: 12.000 steklenic na uro Rotacijski s 6 kalupi Kalupi niso vključeni Nledpfjywy Trjx Agxja Sistem za rekuperacijo zraka Zaključek vratu: PCO 1881 Največja velikost vsebnika: 3 litre Opremljen s silosom, dvigalom in orientatorjem Varnostne zaščite

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, W 116| SIPA PET PÍHALNIK Model: sfr24 Leto: 2007 Hitrost: 38.000 plastenk/uro za 1,75 l - 41.000 plastenk/uro za 1,5 l, 1,25 l, 1,0 l, 0,7 l Rotacijski 24 votlin 1 komplet orodij priložen Sistem za vračanje zraka Linearni optični pregledni sistem za kontrolo kakovosti preform Podprt tip vratu: PCO 1881 Vključuje hladilni agregat Avtomatski podajalnik preform Avtomatski prevračalnik zabojev za preforme Izmetalec plastenk na pnevmatskem transporterju Električna upravljalna plošča v poljščini, angleščini in italijanščini Varnostna zaščita Nedpfjywy Tlox Agxola

Stanje: rabljeno, Leto izdelave: 2004, RAZPOLOŽLJIVOST: TAKOJ W 117| KRONES pihalnik PET Model: Contiform S18 Leto: 2004 Hitrost: 24.000 steklenic/uro za 2,0 L – 28.000 steklenic/uro za 1,5 L Rotacijski 18 votlin Nlsdpfx Agoywy S Usxja Vključen 1 komplet kalupov Avtomatski hladilnik Avtomatski podajalnik preform Avtomatski prekucnik zabojčkov za preforme Izmetalec steklenic vgrajen v pnevmatski transporter Električna nadzorna plošča v poljščini, angleščini in nemščini Varnostna zaščita

Stanje: rabljeno, Leto izdelave: 2009, Übersicht Diese rotierende Roll-to-Roll-Etikettiermaschine wurde 2009 von SIDEL in Frankreich hergestellt. Die Rollquattro F15 18T ist für die Roll-to-Roll-Etikettierung von PET-Flaschen in Getränkeabfüllanlagen konzipiert. Die Maschine arbeitet mit einem Rotationssystem mit 18 Flaschenplatten und ist mit einer mechanischen Nockensteuerung sowie einer manuellen Etikettenanbindung ausgestattet. Technische Daten: Leistung ca. 18.000 Flaschen/Stunde. Formate: 0,5 l / 1,0 l / 1,5 l / 2,0 l. Anwendung: Rollenetikettierung von PET-Flaschen. Konfiguration: Rundlaufmaschine mit 18 Platten, mechanischem Nockenantrieb, manuellem Etikettenanleger. Anschlussdaten: 400 V / 50 Hz / 23 kW / 46 A. Lieferumfang: Etikettiermaschine | SIDEL | Rollquattro F15 18T | 2009 | Rotations-Rollenetikettierer mit 18 Platten. Kühlaggregat | Kelvin Cool-Power | Externes Kühlaggregat. Steuerung | Bedienpult mit Prozessanzeigen. Nlodsyyb Snspfx Agxja

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Nedpoutni Rofx Agxjla Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW Nedpfswa Rhrjx Agxela V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 600 kg, vpenjalna sila: 80 kN, skupna širina: 2.800 mm, skupna dolžina: 4.000 mm, skupna višina: 2.260 mm, Główne cechy: 1. System sterowania komputerowego (PLC) – japoński PLC Mitsubishi 2. Szafa elektryczna – wszystkie podzespoły elektryczne pochodzą od światowych marek, gwarantujących jakość i niezawodność 3. Ekran dotykowy – komputerowy system sterowania INOVANCE 4. Zaawansowany siłownik hydrauliczny z Niemiec 5. Prowadnica liniowa 6. Falownik ABB (Szwajcaria) oraz Rexroth (Niemcy) 7. Dużej średnicy rury stalowe ocynkowane 8. Platforma podnoszona elektrycznie 9. Grzałka ceramiczna 10. System hydrauliczny i połączenia zaworowe – Yuken Industry Specyfikacja techniczna: • Materiał: PE, PP i inne • Maksymalna objętość: 6 l • Wydajność produkcji: 170–260 szt/h • Wymiary: 4,0 × 2,26 × 2,8 m • Waga: 6 T System plastyfikacji: • Reduktor: utwardzane koła zębate, wysoka wytrzymałość, niska emisja hałasu • Ślimak: Ø 70 mm, L/D 24, stal 38CrMoALA, dostępny system chłodzenia • Wydajność plastyfikacji: 100 kg/h (HDPE) • Strefy grzewcze: 3–4 grzałki aluminiowe, grzanie automatyczne • Moc grzewcza: 12 kW/h • Silnik wytłaczarki: silnik asynchroniczny trójfazowy (380 V, 50 Hz) • Wentylator chłodzący: 4 strefy, automatyczne chłodzenie System wytłaczania: • Materiał: wysokogatunkowa stal stopowa, podawanie centralne Nsdpfxev Iflps Agxsla • Ilość głowic: 1 • Maks. średnica głowicy: Ø 160 mm • Strefy grzewcze: 4, grzanie ze stali nierdzewnej • Moc grzewcza: 5–7 kW System zamykania: • Cechy: wysoka wytrzymałość, sztywność, centralne ryglowanie, stabilne otwieranie i zamykanie formy • Siła zamykania: 80 kN • Zakres regulacji odległości płyt: 170–520 mm • Maks. wymiar formy: 380 × 420 mm System elektryczny: • Automatyczny monitoring, alarmy usterek, licznik automatyczny, funkcje pomocnicze • Interfejs sterowania: ekran dotykowy z systemem autodiagnozy • Kontrola temperatury: automatyczny moduł kontroli temperatury • Kontrola ruchu: Inovance (wersja chińsko-angielska) System hydrauliczny: • Cechy: wielofunkcyjny zintegrowany blok hydrauliczny, sterowanie proporcjonalne, wysoka wydajność • Silnik pompy olejowej: trójfazowy asynchroniczny (380V/220V, 50/60 Hz) • Pompa olejowa: importowana pompa podwójna • Zawory: importowane zawory i połączenia pompy oleju • Przewody olejowe: dwuwarstwowe, odporne na ścieranie • Ciśnienie systemowe: 60 kg/cm² • Układ chłodzenia: oddzielny obieg wody, chłodnica oleju System pneumatyczny: • Marka: system pneumatyczny AIRTAC (Tajwan) • Ciśnienie robocze powietrza: 0,6 MPa • Wydajność powietrza: 0,8 m³/min • Zawór elektromagnetyczny: AIRTAC (Tajwan) Główne podzespoły Elementy elektryczne: • System sterowania PLC: MITSUBISHI (Japonia) • Ekran dotykowy: INOVANCE • Sterownik temperatury: HUICHUAN • Przekaźnik pomocniczy: OMRON • Styki: Schneider (Francja) • Silnik elektryczny: trójfazowy 380V • Zasilacz: TAIWAN MEANWELL • Przetwornica: ABB (Szwajcaria) Elementy hydrauliczne: • Pompa olejowa: TAIWAN HIGH-TECH • Zawór: YUKEN • Pompa i połączenia: YUKEN • Uszczelnienia: HALLITE System pneumatyki: • Siłownik: AIRTAC • Zawór powietrza: AIRTAC Maszyna do rozdmuchu wtryskowego została zakupiona bezpośrednio z fabryki w Chinach na potrzeby projektu, który nie został zrealizowany. Maszyna była użytkowana tylko przez jeden miesiąc. Lokalizacja: Siemianowice Śląskie, Polska Dostępne są również urządzenia peryferyjne na sprzedaż: • System chłodzenia powietrzem 5 HP • Podajnik automatyczny • Mieszalnik do barwnika 150 kg • Rozdrabniacz odpadów

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 240, moč: 60 kW (81,58 KM), Oprema: dokumentacija / priročnik, Complete pellet production plant consisting of wood grinder, sawdust pulverizing mill, storage silo for pellet powder, pellet press machine, as well as conveyor belts, pellet collection silo, and weighing system for bags or big bags. Complete plant with full automation. Nlodpfxjwiik Ro Agxea

Stanje: dober (rabljeno), Proizvodna kapaciteta do 4000 steklenic/uro (odvisno od formata). Primerno za formate med 0,25 l in 3 l. Sestavljeno iz: • Peč za segrevanje preoblik (preform), sestavljena iz 6 grelnih modulov z vsakim po 8 infrardečih svetilk • Kolo za prenos preoblik • Dvostopenjski sistem pihanja s stisnjenim zrakom: nizkotlačno pred-pihanje in nato visokotlačno pihanje • Kolo za prenos steklenic Nsdpfswcggvjx Agxela • Dostavljeno z obračalcem palet DOKUMENTACIJA NA VOLJO

Stanje: rabljeno, Leto izdelave: 1999, - PET stretch blow molding machine, manufacturer: Sidel, model: SBO 16, equipped with preform tipper, preform chute, unscrambler, preform conveyor, year of manufacture: 1999, already dismantled, available ex-site. - PET stretch blow molding machine, manufacturer: Sidel, model: SBO 20, equipped with preform tipper, preform chute, unscrambler, preform conveyor, year of manufacture: 1999, already dismantled, available ex-site. Nledjrazwropfx Agxja For sale at a special price.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Nedpfxoyrfvgs Agxjla Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Nedpfx Askucxlsgxola Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: rabljeno, Leto izdelave: 2006, Pregled  Ta pihalni stroj je bil leta 2006 izdelan pri nemškem proizvajalcu KRONES. Stroj je bil del celovite polnilne linije za enkratno uporabo PET plastenk za proizvodnjo svežega mleka. Uporabljal se je za izdelavo 1,0-litrske PET plastenke in je deloval z nazivno hitrostjo 9.000 plastenk na uro. Stanje stroja je opisano kot dobro. Linija je na voljo, ker se je prodajalec odločil, da proizvodnjo mleka preseli drugam in na tej lokaciji nadaljuje le s proizvodnjo sira. Tehnični podatki  Zmogljivost: 9.000 plastenk/uro Formati: 1,0 l Uporaba: sveže mleko Material posode: PET Premer vratu: 38 mm Nsdpjym D U Rsfx Agxsla

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, PET Bottle Blow Moulding Machine Manufacturer: KRONES Model: CONTIFORM K781 Capacity: 12,000 bph Nedpfx Agovddkvoxjla Set includes moulds for 1.5 L and 0.5 L bottles Power: 150 kW Air requirements: 10 bar – 1,500 m³/h, 30 bar – 1,000 m³/h Set dimensions (blow moulder + preform feeder): 1,100 x 340 cm, h: 450 cm Blow moulder dimensions: 500 x 340 cm, h: 250 cm Preform feeder dimensions: 600 x 250 cm, h: 450 cm Air requirements: 10 bar – 1,500 m³/h, 30 bar – 1,000 m³/h Year of manufacture: 2003 Technical documentation included Condition: very good

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Machine (additional info): Rotary blow molding machine Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Nlodpsxyktlofx Agxja Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg

Stanje: rabljeno, Polavtomatski stroj za pihanje PET plastenk Proizvajalec: FERENC Tip: F-1400 Nlodpfx Ageugu E Rjxja Leto proizvodnje: 2006 Kapaciteta: cca 800 kosov/uro Število orodij v stroju: 2 x 5 L (pokrivka 48 mm) Dimenzije peči: - dolžina: 900 mm - širina: 900 mm - višina: 1200 mm Dimenzije pihalnega stroja: - dolžina: 1800 mm - širina: 750 mm - višina: 2000 mm Teža kompleta: 1200 kg Tehnično stanje: rabljeni stroj