Pressta Eisele Profilma 500 E nakup rabljenega (79.725)

Leto izdelave: 2011, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Rezno območje do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazom Hitrost vrtenja žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom pri doseženi nastavljeni vrednosti Isdpfx Aoxl Dz Tel Njia Brezstopenjsko nastavljivo pnevmatsko podajanje materiala Hidropnevmatski podajanje žage Pnevmatski vpenjalci materiala Sistem za pršenje Samo 4400 obratovalnih ur Vključno z navodili za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxGxV)

Leto izdelave: 2006, stanje: rabljeno, Maks. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Iodpfjvcmirsx Al Njia Dolžina podajanja: maks. 800 mm z digitalnim prikazom Hitrost vrtenja žaginega lista: 2 obrata na minuto Števec kosov z avtomatskim izklopom ob doseženem cilju Neomejeno nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalne naprave za material Razpršilna naprava Samo 2200 obratovalnih ur Vključno z navodili za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxGxV)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Iisdpfx Alexvbvve Nja Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Pneumatic cross pusher

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Iodpfx Alexn Iq Dj Noia Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalke materiala Naprava za pršenje Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, commande entièrement automatique entraînement 7,5 kW, S6, 400 V, 50 Hz, 2850 tr/min pour l’utilisation de lames de scie D 550 mm plage de coupe 270x140 mm (largeur x hauteur), D 185 mm largeur de profil max. 270 mm commande avec écran avec compteur de pièces avec dispositif de réversibilité pour une longueur de coupe max. 3000 mm arrêt automatique via interrupteur de fin de course en fin de matériau avancement de lame de scie hydropneumatique, réglable en continu, de bas en haut système de serrage vertical et horizontal, côté alimentation et évacuation de la tête de scie dispositif pneumatique de pulvérisation doseuse élargissement de l’écartement de coupe des deux côtés de la lame dispositif d’alimentation électronique 3–600 mm de longueur d’avance, avec vis à billes et servomoteur, avec dispositif de serrage pneumatique horizontal et vertical, longueur de chute à partir de 75 mm, selon le profil 2 embouts d’aspiration D 100 mm Isdpfeyvtyvjx Al Neia capot de sécurité sur la tête de scie et l’unité d’avance Une installation d’aspiration adaptée peut être proposée en option !

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, univerzálně použitelný díky dvakrát nastavitelnému děrovacímu tělesu pro rohové úhelníky s drážkou o rozměru 25–60 mm a s posunem komory profilu 0–40 mm plynule výškově nastavitelné snímače, děrovací nůž a dorazová vložka snímače a děrovací tělesa jsou opatřeny měřítky zasouvatelný doraz pro snadné vkládání profilů, automaticky se nastavuje při najetí na profil hydraulická aretace dorazu pneumatický děrovací proces přes pákový systém zajišťuje synchronní děrování max. výška dorazu 120 mm výška profilu do 190 mm při stlačení Iodpfx Asyqxbgel Nsia výška děrování do 150 mm šířka profilu do 75 mm, navíc přesahy do 60 mm nejmenší vnitřní rozměr rámu 175 mm 2 pneumatické upínací válce pro upnutí profilů 2 excentrické kotouče pro polohování rámů 2 výkyvná ramena pro odkládání profilů ovládání pomocí 2 nožních ventilů

Stanje: novo, Za obdelavo vseh standardnih aluminijastih okenskih profilnih sistemov kot so Schüco, Hueck, Heroal, Reynolds itd. Univerzalna uporaba zaradi dvakrat nastavljivih prebijalnih teles Za vogalne spojke z dimenzijo utora od 25–60 mm in premikom profilne komore 0–40 mm Neomejeno po višini nastavljivi tipala, prebijalna rezila in vstavki prislonov Iisdohmfyhepfx Al Noa Tipala in prebijalna telesa so opremljena z lestvicami Vgradni prislon za enostavno vstavljanje profilov, samodejno nastavljiv ob pomiku proti profilu Hidravlična blokada prislona Pnevmatski stiskalni postopek prek vzvodnega sistema zagotavlja sinhron prebijalni postopek 2 pnevmatska vpenjalna cilindra za pritrditev profilov 2 ekscentrična diska za pozicioniranje okvirjev 2 zložljivi podporni roki za profile Upravljanje preko 2 nožnih ventilov Vključno s standardnimi orodji

Stanje: dober (rabljeno), Leto izdelave: 1993, Mitre saw, saw unit right/left, double mitre saw, cross-cut and mitre saw, double end profiler - Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 - Cutting length: 250 to 5000 mm - Saw units: swivelable by 45° Iedjtxkprspfx Al Noia - Saw blade: Ø 500 mm - Cutting data 90°: cutting height 350 mm, cutting width 160 mm - Cutting data 45°: cutting height 260 mm, cutting width 125 mm - Dimensions: 5750/1220/H1700 mm - Weight: 1200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Metal circular saw from 2013. This PRESSTA EISELE Profilma 400 V is equipped with a saw blade diameter of Ø400 mm and a powerful motor with approx. 12 kW. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, consider the PRESSTA EISELE Profilma 400 V machine, which we have for sale. Contact us for further details on this machine. • Design: Integrated material feed/loader magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Motor power: approx. 12 kW • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom Iisdpfxjyyxxfs Al Nja • Cutting principle: Cross cut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before saw blade retraction (no secondary trimming) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; exchangeable plastic/PVC pads • Control: PLC-based; operation via control console with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction ports: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction Additional equipment • External chip extraction unit (for connection to Ø100/Ø160 mm ports)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control. Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously. Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding quotation. Ijdpoyyz Txofx Al Njia We provide you with personal and expert advice. Interim sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials. Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing Range & Feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Infinitely variable speed regulation Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ballscrew with servo drive and round-shaft guide Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (outfeed side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double-stroke cycle time: 2–3 seconds Punch scrap ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, reduced pressure) 3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control Minimum quantity lubrication system with 2x 3-liter tank and fill level display Noise reduction package: hood and internal saw blade guard insulated Roller conveyor (740 mm) with operator protection on infeed side Iisdpfxoyyz Ebo Al Nja Sturdy stationary machine frame, working height: 960 mm Manually operated safety hood Saw blade housing located below table surface Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Sawing range & feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Iedoyyzxhepfx Al Njia Subject to prior sale, changes and errors excepted!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.809 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1559, premer žaginega lista: 550 mm, dolžina podajanja os X: 800 mm, skupna dolžina: 2.400 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, Obseg rezanja okroglega jekla pri 90°: 190 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.850 obr/min, največja višina reza: 150 mm, skupna masa: 1.650 kg, dolžina odseka (min.): 3 mm, dolžina odseka (maks.): 4.000 mm, hitrost žaginega lista: 2.850 obr/min, vhodna napetost: 400 V, pogonska enota žage: 7.500 W, premer rezanja: 270 mm, izvrtina žagine plošče: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 €69,430.00 €69,430.00 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter Includes CPU 315 and a Flexisoft, piece count multiplier for bundle processing Cycle time specification in seconds, chain dimensions, includes reversing device for section length up to max. 4 m automatic shutdown via limit switch at the end of the saw material, error diagnostics, includes IXON router for VPN connection, see data sheet motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping from bottom to top, infeed and outfeed side from the saw head, saw kerf extension on both sides of the saw blade, electronic material feed unit 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping, The profile support area in the feed zone is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile, clamping pressure reduction horizontal and vertical with 6 pressure regulators, cycle spraying device with fill level monitoring and automatic shutdown, lubricant container 1 liter, noise protection package, frame interior lined with insulation mats 2 extraction ports Ø 100 mm, safety cover over the saw head and feed unit, 740 mm roller conveyor with access protection on the infeed side, 450 mm Pertinax tabletop with access protection on the outfeed side Iiedpfoy Dtpmjx Al Nja Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be easily removed for emptying 2 outlets with hose adapter 100 mm, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow rate 2,600 m³/h, negative pressure 30 mBar, with fan snail casing above the extractor large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 dB (A) Selector switch for continuous operation or operation triggered by the saw, supplied without power cable, paint finish: RAL 7035 / 9016

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Strojna žaga za izreza in poševne izreza. Stroj ima dve žagini listi s premerom 500 mm. Opremljena je s pnevmatsko vpenjalno napravo. Podajanje je hidropnevmatsko in se sproži z dvoročnim upravljanjem. Omejevalnik materiala je vrtljiv z zaskočnimi točkami ter digitalnim prikazom. Višina izreza ter kot sta motorizirano nastavljiva in imata digitalni prikaz. Ijdpfoyzcpdsx Al Nsia Maks. višina profila: 280 mm Maks. širina izreza: 300 mm Maks. višina izreza: 185 mm Maks. globina izreza: 185 mm

Leto izdelave: 2009, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Iedpfx Aoywtqdol Njia Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Omejilnik materiala: vrtljiv 30° - 90° - 45° Vrtljiv omejilnik materiala z zaskoki in prikazom na zaslonu Programska krmiljenja za samodejno nastavitev višine reza, kotov in višine izreza Shranjevanje do 6 programov Hidropnevmatsko podajanje materiala preko dvoročnega upravljanja Pnevmatske vpenjalke za material Mazanje s hladilno tekočino

Stanje: rabljeno, Leto izdelave: 2009, Hidravlično delovanje Višina profila do 210 mm pod pritiskalcem Največja višina izsekovanja z dvojnimi nastavljivimi izsekovalnimi glavami: 145 mm Iiodpoyu Rw Iefx Al Nja Višina prislona: 150 mm Teža: pribl. 450 kg

Leto izdelave: 1999, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Iijdpfx Alevmz R So Nja Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Iedpfsvtarnsx Al Nsia Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance sawing machine with fully automatic operation * Very high cutting precision * Short cycle times * Low-burr sawing * High reliability * Low maintenance requirements Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Cutting of corner connectors. Very well-maintained, ready-to-operate used condition. Technical data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversal possible - Cut length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on cut length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feeder - Roller conveyors - Extraction unit - Chip bunker - Various accessories Iodpfx Alow D T Uij Nsia - CE marking No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.

Leto izdelave: 1997, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Iedpfx Alex Ecg Uj Neia Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Stanje: rabljeno, Maks. prebijalna sila: 100 kN Nastavljiv hod, maks. 50 mm Ijdpfx Alexrmz Aj Nsia Sprožitev hoda preko nožnega stikala Teža: ca. 600 kg

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: 9182, Offer 23168 Technical Data: - Notching options and miter cuts in 3 planes - Right-angled, single-sided, double-sided, and triple-sided bevel cuts - Can be used as a shifting cut-off saw - Pneumatic profile clamping - Processing with semi-automatic saw units Isdpfx Alemb U E Ao Neia - Saw blade dimensions - vertical: 500 x 3.5 x 40 mm, positive - horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade 60°–90°–25°, motorized positioning with digital display - Saw blade swivel range horizontal with vertical saw blade: - 45° – 90° – 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Manual profile stop shoulder, swivels 30°–90°–45° - Pneumatic coolant spray device - Air supply: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 x D 1400 mm - Weight approx. 1200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1015, profiles with dimensions (HxW) up to 100x195 mm, 80x200 mm automatic work cycle Isdpfjwgmv Ssx Al Njia driven by a 3 kW/400 V motor, 2850 rpm cutting disc d=450x3.8x40 mm, z=110 horizontal and vertical material clamping on the infeed side dosing spray installation horizontal material clamping in the feed device both clamping jaws retract when reversing (prevents scratching of the profile) infinitely adjustable hydropneumatic feed of the cutting disc cutting disc emerges from the rear cut length adjustable from 0–300 mm (with reversing device 0–600 mm) cut length adjustment by handwheel with mechanical counter maximum cut profile width 200 mm cutting range (height x width) 100x195 mm, 80x200 mm automatic shut-off when material is depleted possibility to connect an extraction unit

Stanje: rabljeno, Leto izdelave: 2001, Hidropnevmatski način delovanja Višina profila: 210 mm pod vpenjalom Maks. višina izseka s 2-krat nastavljivimi izsekalnimi glavami: 145 mm Iedpjyu Rztjfx Al Noia Višina prislona: 150 mm Teža: ca. 400 kg

Stanje: rabljeno, Leto izdelave: 1998, Hidropnevmatski način delovanja Višina profila: 180 mm pod pritisnim držalom Največja višina izseka: 145 mm Višina prislona: 150 mm Ijdpfoyrrddjx Al Njia Teža: pribl. 400 kg